! Started logfile: /image_prod/ug002_uva//J1302+5748_X_b_dfm.log on Thu Mar 5 00:59:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1302+5748_X_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1302+5748_X_b_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.820602 visibilities/baseline/integration-bin. ! Found source: J1302+5748 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 8508 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1302+5748_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.163921Jy sigma=8.726034 ! Fit after self-cal, rms=0.438226Jy sigma=3.333990 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8702 mas, bmaj=1.235 mas, bpa=-37.35 degrees ! Estimated noise=1.52058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.428048 Jy ! Component: 100 - total flux cleaned = 0.530637 Jy ! Total flux subtracted in 100 components = 0.530637 Jy ! Clean residual min=-0.017034 max=0.038653 Jy/beam ! Clean residual mean=0.000018 rms=0.003698 Jy/beam ! Combined flux in latest and established models = 0.530637 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.530637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108530Jy sigma=0.789224 ! Fit after self-cal, rms=0.108522Jy sigma=0.789187 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390478 Jy ! Component: 100 - total flux cleaned = 0.0580346 Jy ! Total flux subtracted in 100 components = 0.0580346 Jy ! Clean residual min=-0.016448 max=0.015538 Jy/beam ! Clean residual mean=0.000008 rms=0.002947 Jy/beam ! Combined flux in latest and established models = 0.588672 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.588672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089827Jy sigma=0.659383 ! Fit after self-cal, rms=0.089817Jy sigma=0.659320 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.134 mas, bmaj=1.497 mas, bpa=-35.98 degrees ! Estimated noise=1.03944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133527 Jy ! Component: 100 - total flux cleaned = 0.0206635 Jy ! Component: 150 - total flux cleaned = 0.024905 Jy ! Component: 200 - total flux cleaned = 0.0263752 Jy ! Total flux subtracted in 200 components = 0.0263752 Jy ! Clean residual min=-0.015939 max=0.014791 Jy/beam ! Clean residual mean=-0.000024 rms=0.003162 Jy/beam ! Combined flux in latest and established models = 0.615047 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.615047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087542Jy sigma=0.646671 ! Fit after self-cal, rms=0.087540Jy sigma=0.646645 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.134 x 1.497 at -35.98 degrees (North through East) ! Clean map min=-0.015221 max=0.56181 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.97 KP 1.05 ! LA 1.00 MK 1.01 NL 1.16 OV 0.94 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.95 KP 1.07 ! LA 1.00 MK 0.99 NL 1.16 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.96 KP 1.06 ! LA 0.99 MK 1.03 NL 1.16 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.97 KP 1.06 ! LA 1.01 MK 1.02 NL 1.17 OV 0.92 ! PT 0.89 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.97 KP 1.06 ! LA 0.99 MK 1.01 NL 1.17 OV 0.93 ! PT 0.88 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 1.07 ! LA 1.00 MK 1.00 NL 1.16 OV 0.92 ! PT 0.89 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.97 KP 1.08 ! LA 1.00 MK 1.01 NL 1.17 OV 0.91 ! PT 0.90 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.96 KP 1.06 ! LA 1.01 MK 1.01 NL 1.18 OV 0.93 ! PT 0.89 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.98 KP 1.03 ! LA 1.02 MK 1.01 NL 1.14 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.96 KP 1.07 ! LA 0.99 MK 1.00 NL 1.18 OV 0.93 ! PT 0.89 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.95 KP 1.08 ! LA 1.02 MK 1.00 NL 1.13 OV 0.92 ! PT 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.99 KP 1.04 ! LA 1.02 MK 1.04 NL 1.15 OV 0.91 ! PT 0.90 ! ! ! Fit before self-cal, rms=0.087540Jy sigma=0.646645 ! Fit after self-cal, rms=0.067342Jy sigma=0.490477 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.143 mas, bmaj=1.501 mas, bpa=-36.24 degrees ! Estimated noise=1.04177 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00325066 Jy ! Component: 100 - total flux cleaned = -0.00336751 Jy ! Component: 150 - total flux cleaned = -0.00346308 Jy ! Component: 200 - total flux cleaned = -0.00347193 Jy ! Total flux subtracted in 200 components = -0.00347193 Jy ! Clean residual min=-0.007603 max=0.006921 Jy/beam ! Clean residual mean=-0.000018 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 0.611575 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.611575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067006Jy sigma=0.487726 ! Fit after self-cal, rms=0.067015Jy sigma=0.487622 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067015Jy sigma=0.487622 ! Fit after self-cal, rms=0.057237Jy sigma=0.406795 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.142 mas, bmaj=1.502 mas, bpa=-35.82 degrees ! Estimated noise=1.0415 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110018 Jy ! Component: 100 - total flux cleaned = -0.000108251 Jy ! Component: 150 - total flux cleaned = -0.000107151 Jy ! Component: 200 - total flux cleaned = -0.000141825 Jy ! Total flux subtracted in 200 components = -0.000141825 Jy ! Clean residual min=-0.001916 max=0.001995 Jy/beam ! Clean residual mean=0.000007 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.611433 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.611433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057181Jy sigma=0.406373 ! Fit after self-cal, rms=0.057207Jy sigma=0.406304 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, -42.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124719 Jy ! Component: 100 - total flux cleaned = 0.00153678 Jy ! Component: 150 - total flux cleaned = 0.00153743 Jy ! Component: 200 - total flux cleaned = 0.00153663 Jy ! Total flux subtracted in 200 components = 0.00153663 Jy ! Clean residual min=-0.001798 max=0.001807 Jy/beam ! Clean residual mean=0.000008 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.61297 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 0.61297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057141Jy sigma=0.405804 ! Fit after self-cal, rms=0.057136Jy sigma=0.405774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057136Jy sigma=0.405774 ! Fit after self-cal, rms=0.057094Jy sigma=0.405655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.142 mas, bmaj=1.502 mas, bpa=-35.91 degrees ! Estimated noise=1.04142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258108 Jy ! Component: 100 - total flux cleaned = 0.000291156 Jy ! Component: 150 - total flux cleaned = 0.000320657 Jy ! Component: 200 - total flux cleaned = 0.000291769 Jy ! Total flux subtracted in 200 components = 0.000291769 Jy ! Clean residual min=-0.001709 max=0.001803 Jy/beam ! Clean residual mean=0.000008 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.613262 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 0.613262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057061Jy sigma=0.405410 ! Fit after self-cal, rms=0.057060Jy sigma=0.405405 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.65101e-05 Jy ! Component: 100 - total flux cleaned = 5.67423e-05 Jy ! Component: 150 - total flux cleaned = 3.25964e-05 Jy ! Component: 200 - total flux cleaned = 3.2761e-05 Jy ! Total flux subtracted in 200 components = 3.2761e-05 Jy ! Clean residual min=-0.001661 max=0.001800 Jy/beam ! Clean residual mean=0.000008 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.613294 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.613294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057042Jy sigma=0.405263 ! Fit after self-cal, rms=0.057041Jy sigma=0.405261 ! Inverting map ! Added new window around map position (2.8, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177859 Jy ! Component: 100 - total flux cleaned = 0.00256816 Jy ! Component: 150 - total flux cleaned = 0.00303842 Jy ! Component: 200 - total flux cleaned = 0.0033426 Jy ! Total flux subtracted in 200 components = 0.0033426 Jy ! Clean residual min=-0.001680 max=0.001720 Jy/beam ! Clean residual mean=0.000006 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.616637 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.616637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056968Jy sigma=0.404749 ! Fit after self-cal, rms=0.056967Jy sigma=0.404724 ! Inverting map ! Added new window around map position (29.2, -30.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135283 Jy ! Component: 100 - total flux cleaned = 0.00159749 Jy ! Component: 150 - total flux cleaned = 0.00176254 Jy ! Component: 200 - total flux cleaned = 0.00194526 Jy ! Total flux subtracted in 200 components = 0.00194526 Jy ! Clean residual min=-0.001666 max=0.001629 Jy/beam ! Clean residual mean=0.000007 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.618582 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.618582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056910Jy sigma=0.404235 ! Fit after self-cal, rms=0.056908Jy sigma=0.404214 ! Inverting map ! Added new window around map position (-19, 48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129632 Jy ! Component: 100 - total flux cleaned = 0.00151289 Jy ! Component: 150 - total flux cleaned = 0.00175893 Jy ! Component: 200 - total flux cleaned = 0.00195393 Jy ! Total flux subtracted in 200 components = 0.00195393 Jy ! Clean residual min=-0.001606 max=0.001504 Jy/beam ! Clean residual mean=0.000007 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.620536 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.620536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056853Jy sigma=0.403842 ! Fit after self-cal, rms=0.056850Jy sigma=0.403820 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056850Jy sigma=0.403820 ! Fit after self-cal, rms=0.056812Jy sigma=0.403721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.441 mas, bmaj=2.612 mas, bpa=65.75 degrees ! Estimated noise=1.2788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332942 Jy ! Component: 100 - total flux cleaned = 0.000816016 Jy ! Component: 150 - total flux cleaned = 0.00115062 Jy ! Component: 200 - total flux cleaned = 0.0014638 Jy ! Total flux subtracted in 200 components = 0.0014638 Jy ! Clean residual min=-0.001624 max=0.001583 Jy/beam ! Clean residual mean=0.000010 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.622 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056798Jy sigma=0.403634 ! Fit after self-cal, rms=0.056797Jy sigma=0.403622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163408 Jy ! Component: 100 - total flux cleaned = 0.000354573 Jy ! Component: 150 - total flux cleaned = 0.000493979 Jy ! Component: 200 - total flux cleaned = 0.000606843 Jy ! Total flux subtracted in 200 components = 0.000606843 Jy ! Clean residual min=-0.001593 max=0.001575 Jy/beam ! Clean residual mean=0.000010 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.622607 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.622607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056790Jy sigma=0.403584 ! Fit after self-cal, rms=0.056790Jy sigma=0.403579 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.143 mas, bmaj=1.502 mas, bpa=-35.98 degrees ! Estimated noise=1.0413 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.143 x 1.502 at -35.98 degrees (North through East) ! Clean map min=-0.0014707 max=0.56517 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056790Jy sigma=0.403579 ! Fit after self-cal, rms=0.053099Jy sigma=0.371338 ! Inverting map and beam ! Estimated beam: bmin=1.142 mas, bmaj=1.502 mas, bpa=-35.97 degrees ! Estimated noise=1.04117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214466 Jy ! Component: 100 - total flux cleaned = -0.000214634 Jy ! Component: 150 - total flux cleaned = -0.000241087 Jy ! Component: 200 - total flux cleaned = -0.000214985 Jy ! Total flux subtracted in 200 components = -0.000214985 Jy ! Clean residual min=-0.001594 max=0.001509 Jy/beam ! Clean residual mean=0.000004 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.622392 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 137 components and 0.622392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053074Jy sigma=0.371140 ! Fit after self-cal, rms=0.053074Jy sigma=0.371136 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.36835e-05 Jy ! Component: 100 - total flux cleaned = -6.70826e-06 Jy ! Component: 150 - total flux cleaned = 1.55377e-05 Jy ! Component: 200 - total flux cleaned = 3.71702e-05 Jy ! Total flux subtracted in 200 components = 3.71702e-05 Jy ! Clean residual min=-0.001577 max=0.001518 Jy/beam ! Clean residual mean=0.000005 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.622429 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 143 components and 0.622429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053057Jy sigma=0.371003 ! Fit after self-cal, rms=0.053057Jy sigma=0.371001 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053057Jy sigma=0.371001 ! Fit after self-cal, rms=0.053052Jy sigma=0.370987 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8751 mas, bmaj=1.241 mas, bpa=-37.42 degrees ! Estimated noise=1.52905 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.430409 Jy ! Component: 100 - total flux cleaned = 0.532327 Jy ! Component: 150 - total flux cleaned = 0.570074 Jy ! Component: 200 - total flux cleaned = 0.58778 Jy ! Total flux subtracted in 200 components = 0.58778 Jy ! Clean residual min=-0.004001 max=0.008710 Jy/beam ! Clean residual mean=0.000006 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.58778 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.58778 Jy ! Inverting map and beam ! Estimated beam: bmin=1.143 mas, bmaj=1.502 mas, bpa=-36.01 degrees ! Estimated noise=1.04115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118193 Jy ! Component: 100 - total flux cleaned = 0.0174494 Jy ! Component: 150 - total flux cleaned = 0.020689 Jy ! Component: 200 - total flux cleaned = 0.02328 Jy ! Total flux subtracted in 200 components = 0.02328 Jy ! Clean residual min=-0.001956 max=0.002275 Jy/beam ! Clean residual mean=0.000004 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.61106 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.61106 Jy ! Inverting map ! Added new window around map position (1.4, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233454 Jy ! Component: 100 - total flux cleaned = 0.00359759 Jy ! Component: 150 - total flux cleaned = 0.00429883 Jy ! Component: 200 - total flux cleaned = 0.00493853 Jy ! Total flux subtracted in 200 components = 0.00493853 Jy ! Clean residual min=-0.001696 max=0.002003 Jy/beam ! Clean residual mean=0.000003 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.615998 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 0.615998 Jy ! Inverting map ! Added new window around map position (5.2, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133028 Jy ! Component: 100 - total flux cleaned = 0.00184391 Jy ! Component: 150 - total flux cleaned = 0.00237544 Jy ! Component: 200 - total flux cleaned = 0.00287423 Jy ! Total flux subtracted in 200 components = 0.00287423 Jy ! Clean residual min=-0.001591 max=0.001845 Jy/beam ! Clean residual mean=0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.618873 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 70 components and 0.618873 Jy ! Inverting map ! Added new window around map position (-2.6, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344468 Jy ! Component: 100 - total flux cleaned = 0.000738679 Jy ! Component: 150 - total flux cleaned = 0.000875984 Jy ! Component: 200 - total flux cleaned = 0.00100728 Jy ! Total flux subtracted in 200 components = 0.00100728 Jy ! Clean residual min=-0.001472 max=0.001519 Jy/beam ! Clean residual mean=0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.61988 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 87 components and 0.61988 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.441 mas, bmaj=2.613 mas, bpa=66.02 degrees ! Estimated noise=1.27844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000733309 Jy ! Component: 100 - total flux cleaned = 0.001138 Jy ! Component: 150 - total flux cleaned = 0.00152513 Jy ! Component: 200 - total flux cleaned = 0.00176936 Jy ! Total flux subtracted in 200 components = 0.00176936 Jy ! Clean residual min=-0.001633 max=0.001352 Jy/beam ! Clean residual mean=0.000007 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.621649 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200025 Jy ! Component: 100 - total flux cleaned = 0.00036385 Jy ! Component: 150 - total flux cleaned = 0.000495495 Jy ! Component: 200 - total flux cleaned = 0.000619565 Jy ! Total flux subtracted in 200 components = 0.000619565 Jy ! Clean residual min=-0.001597 max=0.001310 Jy/beam ! Clean residual mean=0.000007 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.622269 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 115 components and 0.622269 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.143 mas, bmaj=1.502 mas, bpa=-36.01 degrees ! Estimated noise=1.04115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166075 Jy ! Component: 100 - total flux cleaned = -0.000165119 Jy ! Component: 150 - total flux cleaned = -0.000163607 Jy ! Component: 200 - total flux cleaned = -0.000162099 Jy ! Total flux subtracted in 200 components = -0.000162099 Jy ! Clean residual min=-0.001467 max=0.001466 Jy/beam ! Clean residual mean=0.000003 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.622107 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 0.622107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053083Jy sigma=0.371319 ! Fit after self-cal, rms=0.053080Jy sigma=0.371260 wmodel J1302+5748_X_b_map.mod ! Writing 128 model components to file: J1302+5748_X_b_map.mod wobs J1302+5748_X_b_uvs.fits ! Writing UV FITS file: J1302+5748_X_b_uvs.fits wwins J1302+5748_X_b_map.win ! wwins: Wrote 8 windows to J1302+5748_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.01051e-05 Jy ! Component: 100 - total flux cleaned = -0.000130229 Jy ! Component: 150 - total flux cleaned = -0.000154958 Jy ! Component: 200 - total flux cleaned = -0.00022624 Jy ! Component: 250 - total flux cleaned = -0.000202741 Jy ! Component: 300 - total flux cleaned = -0.000157226 Jy ! Component: 350 - total flux cleaned = -0.000113059 Jy ! Component: 400 - total flux cleaned = -0.00011309 Jy ! Component: 450 - total flux cleaned = -9.14334e-05 Jy ! Component: 500 - total flux cleaned = 3.35137e-05 Jy ! Component: 550 - total flux cleaned = -7.71627e-06 Jy ! Component: 600 - total flux cleaned = 1.29357e-05 Jy ! Component: 650 - total flux cleaned = 1.31415e-05 Jy ! Component: 700 - total flux cleaned = -2.56936e-05 Jy ! Component: 750 - total flux cleaned = 1.29411e-05 Jy ! Component: 800 - total flux cleaned = -4.44987e-05 Jy ! Component: 850 - total flux cleaned = -8.22294e-05 Jy ! Component: 900 - total flux cleaned = -4.50033e-05 Jy ! Component: 950 - total flux cleaned = -0.000118661 Jy ! Component: 1000 - total flux cleaned = -0.000155018 Jy ! Component: 1050 - total flux cleaned = -0.000155054 Jy ! Component: 1100 - total flux cleaned = -0.000155203 Jy ! Component: 1150 - total flux cleaned = -0.000137485 Jy ! Component: 1200 - total flux cleaned = -0.000137448 Jy ! Component: 1250 - total flux cleaned = -0.000206733 Jy ! Component: 1300 - total flux cleaned = -0.000155074 Jy ! Component: 1350 - total flux cleaned = -0.000154895 Jy ! Component: 1400 - total flux cleaned = -0.000137955 Jy ! Component: 1450 - total flux cleaned = -0.00012142 Jy ! Component: 1500 - total flux cleaned = -0.000154493 Jy ! Component: 1550 - total flux cleaned = -0.000105215 Jy ! Component: 1600 - total flux cleaned = -8.91106e-05 Jy ! Component: 1650 - total flux cleaned = -0.000137636 Jy ! Component: 1700 - total flux cleaned = -0.000169813 Jy ! Component: 1750 - total flux cleaned = -0.000217499 Jy ! Component: 1800 - total flux cleaned = -0.000138258 Jy ! Component: 1850 - total flux cleaned = -0.000154023 Jy ! Component: 1900 - total flux cleaned = -0.000185097 Jy ! Component: 1950 - total flux cleaned = -0.000231583 Jy ! Component: 2000 - total flux cleaned = -0.000216293 Jy ! Component: 2050 - total flux cleaned = -0.000231714 Jy ! Component: 2100 - total flux cleaned = -0.000277228 Jy ! Component: 2150 - total flux cleaned = -0.000322509 Jy ! Component: 2200 - total flux cleaned = -0.000292569 Jy ! Component: 2250 - total flux cleaned = -0.000337241 Jy ! Component: 2300 - total flux cleaned = -0.000307613 Jy ! Component: 2350 - total flux cleaned = -0.000292747 Jy ! Component: 2400 - total flux cleaned = -0.000365945 Jy ! Component: 2450 - total flux cleaned = -0.00035139 Jy ! Component: 2500 - total flux cleaned = -0.000351311 Jy ! Component: 2550 - total flux cleaned = -0.000293711 Jy ! Component: 2600 - total flux cleaned = -0.000336639 Jy ! Component: 2650 - total flux cleaned = -0.000294055 Jy ! Component: 2700 - total flux cleaned = -0.000279939 Jy ! Component: 2750 - total flux cleaned = -0.00029388 Jy ! Component: 2800 - total flux cleaned = -0.000251899 Jy ! Component: 2850 - total flux cleaned = -0.000237985 Jy ! Component: 2900 - total flux cleaned = -0.000210407 Jy ! Component: 2950 - total flux cleaned = -0.000196731 Jy ! Component: 3000 - total flux cleaned = -0.00018301 Jy ! Component: 3050 - total flux cleaned = -0.000142373 Jy ! Component: 3100 - total flux cleaned = -0.000142245 Jy ! Component: 3150 - total flux cleaned = -8.85135e-05 Jy ! Component: 3200 - total flux cleaned = -0.000115213 Jy ! Component: 3250 - total flux cleaned = -0.000141721 Jy ! Component: 3300 - total flux cleaned = -7.56065e-05 Jy ! Component: 3350 - total flux cleaned = -3.62324e-05 Jy ! Component: 3400 - total flux cleaned = -2.31583e-05 Jy ! Component: 3450 - total flux cleaned = 2.85185e-06 Jy ! Component: 3500 - total flux cleaned = 2.82382e-06 Jy ! Component: 3550 - total flux cleaned = 1.56561e-05 Jy ! Component: 3600 - total flux cleaned = 2.84472e-05 Jy ! Component: 3650 - total flux cleaned = 6.66026e-05 Jy ! Component: 3700 - total flux cleaned = 9.1976e-05 Jy ! Component: 3750 - total flux cleaned = 0.000142344 Jy ! Component: 3800 - total flux cleaned = 0.00016734 Jy ! Component: 3850 - total flux cleaned = 0.000192329 Jy ! Component: 3900 - total flux cleaned = 0.000204722 Jy ! Component: 3950 - total flux cleaned = 0.000266445 Jy ! Component: 4000 - total flux cleaned = 0.00025411 Jy ! Component: 4050 - total flux cleaned = 0.000303032 Jy ! Total flux subtracted in 4096 components = 0.000327413 Jy ! Clean residual min=-0.000664 max=0.000766 Jy/beam ! Clean residual mean=0.000002 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.622434 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 446 components and 0.622434 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1302+5748_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.143 x 1.502 at -36.01 degrees (North through East) ! Clean map min=-0.0011595 max=0.5655 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1302+5748_X_b_map.fits wmodel /image_prod/ug002_uva//J1302+5748_X_b_map.mod ! Writing 446 model components to file: /image_prod/ug002_uva//J1302+5748_X_b_map.mod wobs /image_prod/ug002_uva//J1302+5748_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1302+5748_X_b_uvs.fits wwins /image_prod/ug002_uva//J1302+5748_X_b_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J1302+5748_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.565499 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208267 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.110486 0.110486 0.220973 0.441946 0.883892 1.76778 3.53557 7.07113 14.1423 28.2845 56.5691 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.565 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2715.26 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1302+5748_X_b_dfm.log closed on Thu Mar 5 00:59:40 2020