! Started logfile: /image_prod/ug002_uva//J1302+5748_S_j_dfm.log on Thu Mar  5 00:58:58 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1302+5748_S_j_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1302+5748_S_j_uva.fits
! AN table 1: 6 integrations on 28 of 28 possible baselines.
! AN table 2: 6 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.877976 visibilities/baseline/integration-bin.
! Found source: J1302+5748
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 885 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1302+5748_S_j]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.254110Jy  sigma=8.120097
! Fit after  self-cal, rms=0.281433Jy  sigma=1.821285
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.392 mas, bmaj=3.789 mas, bpa=-84.13 degrees
! Estimated noise=4.34877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.568317 Jy
! Component: 100  -  total flux cleaned = 0.692247 Jy
! Total flux subtracted in 100 components = 0.692247 Jy
! Clean residual min=-0.021961 max=0.034562 Jy/beam
! Clean residual mean=-0.000002 rms=0.005916 Jy/beam
! Combined flux in latest and established models = 0.692247 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.692247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107726Jy  sigma=0.634870
! Fit after  self-cal, rms=0.107719Jy  sigma=0.634861
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.742 mas, bmaj=4.271 mas, bpa=-81.22 degrees
! Estimated noise=3.85509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.035731 Jy
! Component: 100  -  total flux cleaned = 0.0524643 Jy
! Component: 150  -  total flux cleaned = 0.0623354 Jy
! Component: 200  -  total flux cleaned = 0.0687783 Jy
! Total flux subtracted in 200 components = 0.0687783 Jy
! Clean residual min=-0.023377 max=0.019366 Jy/beam
! Clean residual mean=-0.000000 rms=0.005002 Jy/beam
! Combined flux in latest and established models = 0.761026 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.761025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094806Jy  sigma=0.556957
! Fit after  self-cal, rms=0.094674Jy  sigma=0.556165
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.742 x 4.271 at -81.22 degrees (North through East)
! Clean map  min=-0.022938  max=0.72733 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.99     KP        1.03     MK        0.96     
!   NL        0.98     OV        0.89     PT        1.05     SC        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        1.01     HN        0.99     KP        1.02     
!   MK        0.94     NL        0.91     OV        0.87     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.03     KP        1.03     MK        1.03     
!   NL        0.90     OV        0.89     PT        1.01     SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.04     HN        1.03     KP        1.03     
!   MK        1.03     NL        0.90     OV        0.90     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.01     KP        1.01     MK        1.06     
!   NL        0.98     OV        0.89     PT        1.01     SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        1.02     HN        0.99     KP        1.05     
!   MK        1.01     NL        1.07     OV        0.89     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.094674Jy  sigma=0.556165
! Fit after  self-cal, rms=0.069282Jy  sigma=0.398094
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.777 mas, bmaj=4.293 mas, bpa=-85.06 degrees
! Estimated noise=3.8619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (42, 39.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0072119 Jy
! Component: 100  -  total flux cleaned = 0.00837516 Jy
! Component: 150  -  total flux cleaned = 0.00818195 Jy
! Component: 200  -  total flux cleaned = 0.0080972 Jy
! Total flux subtracted in 200 components = 0.0080972 Jy
! Clean residual min=-0.005641 max=0.006140 Jy/beam
! Clean residual mean=0.000001 rms=0.001505 Jy/beam
! Combined flux in latest and established models = 0.769123 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 45 components and 0.769123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068407Jy  sigma=0.393162
! Fit after  self-cal, rms=0.068425Jy  sigma=0.392959
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068425Jy  sigma=0.392959
! Fit after  self-cal, rms=0.068271Jy  sigma=0.392804
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=4.292 mas, bpa=-85.05 degrees
! Estimated noise=3.85805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000590858 Jy
! Component: 100  -  total flux cleaned = -0.000662965 Jy
! Component: 150  -  total flux cleaned = -0.000662877 Jy
! Component: 200  -  total flux cleaned = -0.00060288 Jy
! Total flux subtracted in 200 components = -0.00060288 Jy
! Clean residual min=-0.005457 max=0.006243 Jy/beam
! Clean residual mean=0.000001 rms=0.001452 Jy/beam
! Combined flux in latest and established models = 0.76852 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 55 components and 0.76852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068118Jy  sigma=0.391942
! Fit after  self-cal, rms=0.068108Jy  sigma=0.391874
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-74, -114.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478536 Jy
! Component: 100  -  total flux cleaned = 0.00466219 Jy
! Component: 150  -  total flux cleaned = 0.00475133 Jy
! Component: 200  -  total flux cleaned = 0.00483752 Jy
! Total flux subtracted in 200 components = 0.00483752 Jy
! Clean residual min=-0.005133 max=0.005698 Jy/beam
! Clean residual mean=0.000001 rms=0.001371 Jy/beam
! Combined flux in latest and established models = 0.773357 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 71 components and 0.773357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067574Jy  sigma=0.388370
! Fit after  self-cal, rms=0.067564Jy  sigma=0.388214
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067564Jy  sigma=0.388214
! Fit after  self-cal, rms=0.067442Jy  sigma=0.387970
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=4.29 mas, bpa=-85.19 degrees
! Estimated noise=3.85517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000786564 Jy
! Component: 100  -  total flux cleaned = 0.00103371 Jy
! Component: 150  -  total flux cleaned = 0.00111107 Jy
! Component: 200  -  total flux cleaned = 0.00132308 Jy
! Total flux subtracted in 200 components = 0.00132308 Jy
! Clean residual min=-0.005073 max=0.005636 Jy/beam
! Clean residual mean=0.000002 rms=0.001320 Jy/beam
! Combined flux in latest and established models = 0.77468 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.77468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067241Jy  sigma=0.386837
! Fit after  self-cal, rms=0.067234Jy  sigma=0.386798
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (60, 91).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0007555 Jy
! Component: 100  -  total flux cleaned = 0.000607804 Jy
! Component: 150  -  total flux cleaned = 0.000889039 Jy
! Component: 200  -  total flux cleaned = 0.00153304 Jy
! Total flux subtracted in 200 components = 0.00153304 Jy
! Clean residual min=-0.004235 max=0.004490 Jy/beam
! Clean residual mean=0.000001 rms=0.001144 Jy/beam
! Combined flux in latest and established models = 0.776213 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 0.776213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066628Jy  sigma=0.383078
! Fit after  self-cal, rms=0.066595Jy  sigma=0.382917
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066595Jy  sigma=0.382917
! Fit after  self-cal, rms=0.066574Jy  sigma=0.382707
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.356 mas, bmaj=8.692 mas, bpa=79.53 degrees
! Estimated noise=4.89628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174878 Jy
! Component: 100  -  total flux cleaned = 0.00206396 Jy
! Component: 150  -  total flux cleaned = 0.00187991 Jy
! Component: 200  -  total flux cleaned = 0.00193029 Jy
! Total flux subtracted in 200 components = 0.00193029 Jy
! Clean residual min=-0.004848 max=0.004843 Jy/beam
! Clean residual mean=0.000000 rms=0.001345 Jy/beam
! Combined flux in latest and established models = 0.778144 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 109 components and 0.778144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066459Jy  sigma=0.382361
! Fit after  self-cal, rms=0.066444Jy  sigma=0.382248
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000247463 Jy
! Component: 100  -  total flux cleaned = -0.000252969 Jy
! Component: 150  -  total flux cleaned = -0.000253895 Jy
! Component: 200  -  total flux cleaned = -0.000121622 Jy
! Total flux subtracted in 200 components = -0.000121622 Jy
! Clean residual min=-0.004700 max=0.004917 Jy/beam
! Clean residual mean=0.000001 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.778022 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 114 components and 0.778022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066391Jy  sigma=0.382092
! Fit after  self-cal, rms=0.066381Jy  sigma=0.382027
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.774 mas, bmaj=4.289 mas, bpa=-85.21 degrees
! Estimated noise=3.85336 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.774 x 4.289 at -85.21 degrees (North through East)
! Clean map  min=-0.0056661  max=0.72677 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066381Jy  sigma=0.382027
! Fit after  self-cal, rms=0.061822Jy  sigma=0.352639
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=4.291 mas, bpa=-84.93 degrees
! Estimated noise=3.8543 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000559074 Jy
! Component: 100  -  total flux cleaned = -0.000495036 Jy
! Component: 150  -  total flux cleaned = -0.000557973 Jy
! Component: 200  -  total flux cleaned = -0.000441349 Jy
! Total flux subtracted in 200 components = -0.000441349 Jy
! Clean residual min=-0.003963 max=0.004113 Jy/beam
! Clean residual mean=0.000002 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.777581 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 127 components and 0.777581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061685Jy  sigma=0.351813
! Fit after  self-cal, rms=0.061677Jy  sigma=0.351795
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.28434e-05 Jy
! Component: 100  -  total flux cleaned = -6.63778e-05 Jy
! Component: 150  -  total flux cleaned = 0.000134636 Jy
! Component: 200  -  total flux cleaned = 0.000181433 Jy
! Total flux subtracted in 200 components = 0.000181433 Jy
! Clean residual min=-0.003991 max=0.004056 Jy/beam
! Clean residual mean=0.000002 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 0.777762 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 133 components and 0.777762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061588Jy  sigma=0.351327
! Fit after  self-cal, rms=0.061585Jy  sigma=0.351317
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061585Jy  sigma=0.351317
! Fit after  self-cal, rms=0.061555Jy  sigma=0.351261
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.383 mas, bmaj=3.77 mas, bpa=-82.95 degrees
! Estimated noise=4.37452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.568715 Jy
! Component: 100  -  total flux cleaned = 0.692732 Jy
! Component: 150  -  total flux cleaned = 0.723667 Jy
! Component: 200  -  total flux cleaned = 0.739192 Jy
! Total flux subtracted in 200 components = 0.739192 Jy
! Clean residual min=-0.008715 max=0.010225 Jy/beam
! Clean residual mean=-0.000000 rms=0.002145 Jy/beam
! Combined flux in latest and established models = 0.739192 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.739192 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=4.291 mas, bpa=-85.02 degrees
! Estimated noise=3.85253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.5, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117867 Jy
! Component: 100  -  total flux cleaned = 0.018672 Jy
! Component: 150  -  total flux cleaned = 0.0229125 Jy
! Component: 200  -  total flux cleaned = 0.0255708 Jy
! Total flux subtracted in 200 components = 0.0255708 Jy
! Clean residual min=-0.005256 max=0.005337 Jy/beam
! Clean residual mean=0.000002 rms=0.001373 Jy/beam
! Combined flux in latest and established models = 0.764763 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.764763 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.355 mas, bmaj=8.691 mas, bpa=79.61 degrees
! Estimated noise=4.89528 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431828 Jy
! Component: 100  -  total flux cleaned = 0.0055665 Jy
! Component: 150  -  total flux cleaned = 0.00664982 Jy
! Component: 200  -  total flux cleaned = 0.00739652 Jy
! Total flux subtracted in 200 components = 0.00739652 Jy
! Clean residual min=-0.004866 max=0.004484 Jy/beam
! Clean residual mean=0.000004 rms=0.001308 Jy/beam
! Combined flux in latest and established models = 0.77216 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000477006 Jy
! Component: 100  -  total flux cleaned = 0.000908796 Jy
! Component: 150  -  total flux cleaned = 0.00130759 Jy
! Component: 200  -  total flux cleaned = 0.00160385 Jy
! Total flux subtracted in 200 components = 0.00160385 Jy
! Clean residual min=-0.004472 max=0.004410 Jy/beam
! Clean residual mean=0.000002 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.773764 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 75 components and 0.773763 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=4.291 mas, bpa=-85.02 degrees
! Estimated noise=3.85253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000406331 Jy
! Component: 100  -  total flux cleaned = 0.000524252 Jy
! Component: 150  -  total flux cleaned = 0.00084101 Jy
! Component: 200  -  total flux cleaned = 0.000932214 Jy
! Total flux subtracted in 200 components = 0.000932214 Jy
! Clean residual min=-0.003999 max=0.004682 Jy/beam
! Clean residual mean=0.000002 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.774696 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 97 components and 0.774696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061975Jy  sigma=0.353148
! Fit after  self-cal, rms=0.061909Jy  sigma=0.352889
wmodel J1302+5748_S_j_map.mod
! Writing 97 model components to file: J1302+5748_S_j_map.mod
wobs   J1302+5748_S_j_uvs.fits
! Writing UV FITS file: J1302+5748_S_j_uvs.fits
wwins  J1302+5748_S_j_map.win
! wwins: Wrote 5 windows to J1302+5748_S_j_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000736907 Jy
! Component: 100  -  total flux cleaned = 0.000735709 Jy
! Component: 150  -  total flux cleaned = 0.000867723 Jy
! Component: 200  -  total flux cleaned = 0.000803526 Jy
! Component: 250  -  total flux cleaned = 0.000743257 Jy
! Component: 300  -  total flux cleaned = 0.000686514 Jy
! Component: 350  -  total flux cleaned = 0.000572113 Jy
! Component: 400  -  total flux cleaned = 0.000460701 Jy
! Component: 450  -  total flux cleaned = 0.000460236 Jy
! Component: 500  -  total flux cleaned = 0.000351973 Jy
! Component: 550  -  total flux cleaned = 0.000351794 Jy
! Component: 600  -  total flux cleaned = 0.00014581 Jy
! Component: 650  -  total flux cleaned = 0.000146199 Jy
! Component: 700  -  total flux cleaned = 4.64478e-05 Jy
! Component: 750  -  total flux cleaned = -2.03988e-06 Jy
! Component: 800  -  total flux cleaned = -4.92623e-05 Jy
! Component: 850  -  total flux cleaned = -9.52628e-05 Jy
! Component: 900  -  total flux cleaned = -0.000186787 Jy
! Component: 950  -  total flux cleaned = -0.000187099 Jy
! Component: 1000  -  total flux cleaned = -0.000407918 Jy
! Component: 1050  -  total flux cleaned = -0.000450809 Jy
! Component: 1100  -  total flux cleaned = -0.000450987 Jy
! Component: 1150  -  total flux cleaned = -0.000661723 Jy
! Component: 1200  -  total flux cleaned = -0.000744072 Jy
! Component: 1250  -  total flux cleaned = -0.000743742 Jy
! Component: 1300  -  total flux cleaned = -0.000824632 Jy
! Component: 1350  -  total flux cleaned = -0.000863793 Jy
! Component: 1400  -  total flux cleaned = -0.000825547 Jy
! Component: 1450  -  total flux cleaned = -0.000902522 Jy
! Component: 1500  -  total flux cleaned = -0.000826656 Jy
! Component: 1550  -  total flux cleaned = -0.000789003 Jy
! Component: 1600  -  total flux cleaned = -0.000641528 Jy
! Component: 1650  -  total flux cleaned = -0.000605074 Jy
! Component: 1700  -  total flux cleaned = -0.000461121 Jy
! Component: 1750  -  total flux cleaned = -0.000532351 Jy
! Component: 1800  -  total flux cleaned = -0.000531902 Jy
! Component: 1850  -  total flux cleaned = -0.000496787 Jy
! Component: 1900  -  total flux cleaned = -0.000530998 Jy
! Component: 1950  -  total flux cleaned = -0.000565007 Jy
! Component: 2000  -  total flux cleaned = -0.000565572 Jy
! Component: 2050  -  total flux cleaned = -0.000765615 Jy
! Component: 2100  -  total flux cleaned = -0.000798533 Jy
! Component: 2150  -  total flux cleaned = -0.000896657 Jy
! Component: 2200  -  total flux cleaned = -0.00109082 Jy
! Component: 2250  -  total flux cleaned = -0.0010907 Jy
! Component: 2300  -  total flux cleaned = -0.00115436 Jy
! Component: 2350  -  total flux cleaned = -0.00121733 Jy
! Component: 2400  -  total flux cleaned = -0.00121707 Jy
! Component: 2450  -  total flux cleaned = -0.00137203 Jy
! Component: 2500  -  total flux cleaned = -0.00140276 Jy
! Component: 2550  -  total flux cleaned = -0.0014336 Jy
! Component: 2600  -  total flux cleaned = -0.00155457 Jy
! Component: 2650  -  total flux cleaned = -0.00158452 Jy
! Component: 2700  -  total flux cleaned = -0.00164391 Jy
! Component: 2750  -  total flux cleaned = -0.0017031 Jy
! Component: 2800  -  total flux cleaned = -0.00182041 Jy
! Component: 2850  -  total flux cleaned = -0.00190738 Jy
! Component: 2900  -  total flux cleaned = -0.00199396 Jy
! Component: 2950  -  total flux cleaned = -0.00210866 Jy
! Component: 3000  -  total flux cleaned = -0.00216539 Jy
! Component: 3050  -  total flux cleaned = -0.00225012 Jy
! Component: 3100  -  total flux cleaned = -0.00225043 Jy
! Component: 3150  -  total flux cleaned = -0.00233411 Jy
! Component: 3200  -  total flux cleaned = -0.00250028 Jy
! Component: 3250  -  total flux cleaned = -0.00252785 Jy
! Component: 3300  -  total flux cleaned = -0.00266478 Jy
! Component: 3350  -  total flux cleaned = -0.00280063 Jy
! Component: 3400  -  total flux cleaned = -0.00282775 Jy
! Component: 3450  -  total flux cleaned = -0.00277431 Jy
! Component: 3500  -  total flux cleaned = -0.00293489 Jy
! Component: 3550  -  total flux cleaned = -0.00301475 Jy
! Component: 3600  -  total flux cleaned = -0.00314675 Jy
! Component: 3650  -  total flux cleaned = -0.00317312 Jy
! Component: 3700  -  total flux cleaned = -0.00319934 Jy
! Component: 3750  -  total flux cleaned = -0.00325163 Jy
! Component: 3800  -  total flux cleaned = -0.00338095 Jy
! Component: 3850  -  total flux cleaned = -0.00335524 Jy
! Component: 3900  -  total flux cleaned = -0.00345777 Jy
! Component: 3950  -  total flux cleaned = -0.00358481 Jy
! Component: 4000  -  total flux cleaned = -0.00353421 Jy
! Component: 4050  -  total flux cleaned = -0.00355954 Jy
! Total flux subtracted in 4096 components = -0.00373504 Jy
! Clean residual min=-0.001298 max=0.001504 Jy/beam
! Clean residual mean=-0.000005 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.770961 Jy
keep
! Adding 238 model components to the UV plane model.
! The established model now contains 335 components and 0.770961 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1302+5748_S_j_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.775 x 4.291 at -85.02 degrees (North through East)
! Clean map  min=-0.0041522  max=0.72771 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1302+5748_S_j_map.fits
wmodel /image_prod/ug002_uva//J1302+5748_S_j_map.mod
! Writing 335 model components to file: /image_prod/ug002_uva//J1302+5748_S_j_map.mod
wobs   /image_prod/ug002_uva//J1302+5748_S_j_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1302+5748_S_j_uvs.fits
wwins  /image_prod/ug002_uva//J1302+5748_S_j_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1302+5748_S_j_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.727711 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000388172 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.160025 0.160025 0.320049 0.640099 1.2802 2.5604 5.12079 10.2416 20.4832 40.9663 81.9326
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.727 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1874.71 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1302+5748_S_j_dfm.log closed on Thu Mar  5 00:59:01 2020