! Started logfile: /image_prod/ug002_uva//J1302+5748_S_f_dfm.log on Thu Mar  5 00:58:39 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1302+5748_S_f_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1302+5748_S_f_uva.fits
! AN table 1: 6 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.865741 visibilities/baseline/integration-bin.
! Found source: J1302+5748
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 561 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1302+5748_S_f]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.365604Jy  sigma=12.830401
! Fit after  self-cal, rms=0.474135Jy  sigma=3.158038
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.731 mas, bmaj=9.799 mas, bpa=-56.9 degrees
! Estimated noise=3.68553 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.609504 Jy
! Component: 100  -  total flux cleaned = 0.74495 Jy
! Total flux subtracted in 100 components = 0.74495 Jy
! Clean residual min=-0.056514 max=0.056634 Jy/beam
! Clean residual mean=-0.000032 rms=0.013385 Jy/beam
! Combined flux in latest and established models = 0.74495 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.74495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.475661Jy  sigma=1.682903
! Fit after  self-cal, rms=0.475662Jy  sigma=1.682805
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.098 mas, bmaj=10.09 mas, bpa=-58.08 degrees
! Estimated noise=3.14621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011143 Jy
! Component: 100  -  total flux cleaned = 0.00678588 Jy
! Component: 150  -  total flux cleaned = 0.00240889 Jy
! Component: 200  -  total flux cleaned = -0.00124447 Jy
! Total flux subtracted in 200 components = -0.00124447 Jy
! Clean residual min=-0.044556 max=0.041137 Jy/beam
! Clean residual mean=-0.000065 rms=0.010994 Jy/beam
! Combined flux in latest and established models = 0.743705 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.743705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.452518Jy  sigma=1.610528
! Fit after  self-cal, rms=0.452385Jy  sigma=1.610108
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.098 x 10.09 at -58.08 degrees (North through East)
! Clean map  min=-0.0429  max=0.78703 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.06     HN        1.01     KP        1.09     
!   LA        1.03     MK        1.03     NL        1.03     OV        0.86     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        1.06     KP        1.12     
!   LA        1.04     MK        1.03     NL        0.67     OV        0.93     
!   SC        0.39     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        1.01     KP        1.12     
!   LA        1.00     MK        1.04     NL        1.01     OV        0.93     
!   SC        1.10     
! 
! 
! Fit before self-cal, rms=0.452385Jy  sigma=1.610108
! Fit after  self-cal, rms=0.089479Jy  sigma=0.766548
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.091 mas, bmaj=10.32 mas, bpa=-57.95 degrees
! Estimated noise=3.12684 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00574386 Jy
! Component: 100  -  total flux cleaned = -0.00323163 Jy
! Component: 150  -  total flux cleaned = -0.00108098 Jy
! Component: 200  -  total flux cleaned = 1.39376e-05 Jy
! Total flux subtracted in 200 components = 1.39376e-05 Jy
! Clean residual min=-0.011519 max=0.011638 Jy/beam
! Clean residual mean=-0.000014 rms=0.003236 Jy/beam
! Combined flux in latest and established models = 0.743719 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 45 components and 0.743719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083747Jy  sigma=0.719015
! Fit after  self-cal, rms=0.083391Jy  sigma=0.717613
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083391Jy  sigma=0.717613
! Fit after  self-cal, rms=0.080756Jy  sigma=0.709669
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=10.34 mas, bpa=-57.98 degrees
! Estimated noise=3.12582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00467019 Jy
! Component: 100  -  total flux cleaned = 0.00491805 Jy
! Component: 150  -  total flux cleaned = 0.00530805 Jy
! Component: 200  -  total flux cleaned = 0.0054587 Jy
! Total flux subtracted in 200 components = 0.0054587 Jy
! Clean residual min=-0.009915 max=0.009488 Jy/beam
! Clean residual mean=-0.000008 rms=0.002574 Jy/beam
! Combined flux in latest and established models = 0.749178 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 67 components and 0.749178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079143Jy  sigma=0.696940
! Fit after  self-cal, rms=0.079098Jy  sigma=0.696830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000260262 Jy
! Component: 100  -  total flux cleaned = 0.000374185 Jy
! Component: 150  -  total flux cleaned = 0.000476877 Jy
! Component: 200  -  total flux cleaned = 0.000758117 Jy
! Total flux subtracted in 200 components = 0.000758117 Jy
! Clean residual min=-0.009838 max=0.009181 Jy/beam
! Clean residual mean=-0.000007 rms=0.002485 Jy/beam
! Combined flux in latest and established models = 0.749936 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 79 components and 0.749936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078737Jy  sigma=0.694233
! Fit after  self-cal, rms=0.078718Jy  sigma=0.694166
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078718Jy  sigma=0.694166
! Fit after  self-cal, rms=0.077388Jy  sigma=0.690359
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.086 mas, bmaj=10.36 mas, bpa=-57.99 degrees
! Estimated noise=3.12769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398157 Jy
! Component: 100  -  total flux cleaned = 0.00436943 Jy
! Component: 150  -  total flux cleaned = 0.00468022 Jy
! Component: 200  -  total flux cleaned = 0.00459477 Jy
! Total flux subtracted in 200 components = 0.00459477 Jy
! Clean residual min=-0.009771 max=0.007815 Jy/beam
! Clean residual mean=-0.000004 rms=0.002205 Jy/beam
! Combined flux in latest and established models = 0.754531 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 93 components and 0.754531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076892Jy  sigma=0.686853
! Fit after  self-cal, rms=0.076884Jy  sigma=0.686842
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.27604e-05 Jy
! Component: 100  -  total flux cleaned = -8.33816e-05 Jy
! Component: 150  -  total flux cleaned = -0.000146485 Jy
! Component: 200  -  total flux cleaned = -8.92504e-05 Jy
! Total flux subtracted in 200 components = -8.92504e-05 Jy
! Clean residual min=-0.009731 max=0.007886 Jy/beam
! Clean residual mean=-0.000004 rms=0.002176 Jy/beam
! Combined flux in latest and established models = 0.754442 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 100 components and 0.754441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076759Jy  sigma=0.685973
! Fit after  self-cal, rms=0.076757Jy  sigma=0.685955
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076757Jy  sigma=0.685955
! Fit after  self-cal, rms=0.076177Jy  sigma=0.684564
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.654 mas, bmaj=11.61 mas, bpa=-68.37 degrees
! Estimated noise=3.89972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353615 Jy
! Component: 100  -  total flux cleaned = 0.00537062 Jy
! Component: 150  -  total flux cleaned = 0.00582818 Jy
! Component: 200  -  total flux cleaned = 0.00598927 Jy
! Total flux subtracted in 200 components = 0.00598927 Jy
! Clean residual min=-0.009867 max=0.009535 Jy/beam
! Clean residual mean=-0.000004 rms=0.002616 Jy/beam
! Combined flux in latest and established models = 0.760431 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 113 components and 0.760431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076053Jy  sigma=0.683777
! Fit after  self-cal, rms=0.076038Jy  sigma=0.683661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000284114 Jy
! Component: 100  -  total flux cleaned = 0.000409972 Jy
! Component: 150  -  total flux cleaned = 0.000496126 Jy
! Component: 200  -  total flux cleaned = 0.000576041 Jy
! Total flux subtracted in 200 components = 0.000576041 Jy
! Clean residual min=-0.009779 max=0.009514 Jy/beam
! Clean residual mean=-0.000004 rms=0.002578 Jy/beam
! Combined flux in latest and established models = 0.761007 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 121 components and 0.761007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076028Jy  sigma=0.683526
! Fit after  self-cal, rms=0.076033Jy  sigma=0.683521
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.084 mas, bmaj=10.37 mas, bpa=-57.99 degrees
! Estimated noise=3.1303 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.084 x 10.37 at -57.99 degrees (North through East)
! Clean map  min=-0.0139  max=0.77449 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076033Jy  sigma=0.683521
! Fit after  self-cal, rms=0.069033Jy  sigma=0.630453
! Inverting map and beam 
! Estimated beam: bmin=3.082 mas, bmaj=10.37 mas, bpa=-57.98 degrees
! Estimated noise=3.12927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000841409 Jy
! Component: 100  -  total flux cleaned = 0.000927143 Jy
! Component: 150  -  total flux cleaned = 0.000732875 Jy
! Component: 200  -  total flux cleaned = 0.000672453 Jy
! Total flux subtracted in 200 components = 0.000672453 Jy
! Clean residual min=-0.009636 max=0.007429 Jy/beam
! Clean residual mean=-0.000001 rms=0.002002 Jy/beam
! Combined flux in latest and established models = 0.761679 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 130 components and 0.761679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068830Jy  sigma=0.629062
! Fit after  self-cal, rms=0.068846Jy  sigma=0.629028
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.03653e-05 Jy
! Component: 100  -  total flux cleaned = -0.00016439 Jy
! Component: 150  -  total flux cleaned = -0.000245897 Jy
! Component: 200  -  total flux cleaned = -0.000283117 Jy
! Total flux subtracted in 200 components = -0.000283117 Jy
! Clean residual min=-0.009600 max=0.007399 Jy/beam
! Clean residual mean=-0.000001 rms=0.001992 Jy/beam
! Combined flux in latest and established models = 0.761396 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 133 components and 0.761396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068783Jy  sigma=0.628634
! Fit after  self-cal, rms=0.068786Jy  sigma=0.628626
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068786Jy  sigma=0.628626
! Fit after  self-cal, rms=0.068597Jy  sigma=0.628210
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.702 mas, bmaj=10.11 mas, bpa=-56.84 degrees
! Estimated noise=3.64514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.602783 Jy
! Component: 100  -  total flux cleaned = 0.734351 Jy
! Component: 150  -  total flux cleaned = 0.767815 Jy
! Component: 200  -  total flux cleaned = 0.777269 Jy
! Total flux subtracted in 200 components = 0.777269 Jy
! Clean residual min=-0.012483 max=0.012765 Jy/beam
! Clean residual mean=-0.000001 rms=0.003266 Jy/beam
! Combined flux in latest and established models = 0.77727 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.77727 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.081 mas, bmaj=10.38 mas, bpa=-57.97 degrees
! Estimated noise=3.12937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413074 Jy
! Component: 100  -  total flux cleaned = 0.00534847 Jy
! Component: 150  -  total flux cleaned = 0.00533318 Jy
! Component: 200  -  total flux cleaned = 0.0045834 Jy
! Total flux subtracted in 200 components = 0.0045834 Jy
! Clean residual min=-0.008553 max=0.009555 Jy/beam
! Clean residual mean=-0.000002 rms=0.002227 Jy/beam
! Combined flux in latest and established models = 0.781853 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.781853 Jy
! Inverting map 
! Added new window around map position (2.5, -28.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00493889 Jy
! Component: 100  -  total flux cleaned = 0.00881032 Jy
! Component: 150  -  total flux cleaned = 0.0105555 Jy
! Component: 200  -  total flux cleaned = 0.0110702 Jy
! Total flux subtracted in 200 components = 0.0110702 Jy
! Clean residual min=-0.006622 max=0.005677 Jy/beam
! Clean residual mean=0.000002 rms=0.001653 Jy/beam
! Combined flux in latest and established models = 0.792923 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 52 components and 0.792923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.643 mas, bmaj=11.6 mas, bpa=-68.28 degrees
! Estimated noise=3.90421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110483 Jy
! Component: 100  -  total flux cleaned = -0.00150337 Jy
! Component: 150  -  total flux cleaned = -0.0020946 Jy
! Component: 200  -  total flux cleaned = -0.00251748 Jy
! Total flux subtracted in 200 components = -0.00251748 Jy
! Clean residual min=-0.006611 max=0.004711 Jy/beam
! Clean residual mean=0.000007 rms=0.001466 Jy/beam
! Combined flux in latest and established models = 0.790406 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000557431 Jy
! Component: 100  -  total flux cleaned = -0.00104276 Jy
! Component: 150  -  total flux cleaned = -0.00140528 Jy
! Component: 200  -  total flux cleaned = -0.00173671 Jy
! Total flux subtracted in 200 components = -0.00173671 Jy
! Clean residual min=-0.005980 max=0.004234 Jy/beam
! Clean residual mean=0.000008 rms=0.001346 Jy/beam
! Combined flux in latest and established models = 0.788669 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 97 components and 0.788669 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.081 mas, bmaj=10.38 mas, bpa=-57.97 degrees
! Estimated noise=3.12937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.90389e-05 Jy
! Component: 100  -  total flux cleaned = -0.000261301 Jy
! Component: 150  -  total flux cleaned = -0.000360352 Jy
! Component: 200  -  total flux cleaned = -0.000527779 Jy
! Total flux subtracted in 200 components = -0.000527779 Jy
! Clean residual min=-0.005965 max=0.005257 Jy/beam
! Clean residual mean=0.000004 rms=0.001389 Jy/beam
! Combined flux in latest and established models = 0.788141 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 120 components and 0.788142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067389Jy  sigma=0.615673
! Fit after  self-cal, rms=0.067334Jy  sigma=0.615211
wmodel J1302+5748_S_f_map.mod
! Writing 120 model components to file: J1302+5748_S_f_map.mod
wobs   J1302+5748_S_f_uvs.fits
! Writing UV FITS file: J1302+5748_S_f_uvs.fits
wwins  J1302+5748_S_f_map.win
! wwins: Wrote 2 windows to J1302+5748_S_f_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110101 Jy
! Component: 100  -  total flux cleaned = -0.00171851 Jy
! Component: 150  -  total flux cleaned = -0.00244979 Jy
! Component: 200  -  total flux cleaned = -0.00305922 Jy
! Component: 250  -  total flux cleaned = -0.00284396 Jy
! Component: 300  -  total flux cleaned = -0.00256874 Jy
! Component: 350  -  total flux cleaned = -0.00216894 Jy
! Component: 400  -  total flux cleaned = -0.00178305 Jy
! Component: 450  -  total flux cleaned = -0.00153371 Jy
! Component: 500  -  total flux cleaned = -0.00105099 Jy
! Component: 550  -  total flux cleaned = -0.000876341 Jy
! Component: 600  -  total flux cleaned = -0.000649783 Jy
! Component: 650  -  total flux cleaned = -0.000483889 Jy
! Component: 700  -  total flux cleaned = -0.000163348 Jy
! Component: 750  -  total flux cleaned = 4.32458e-05 Jy
! Component: 800  -  total flux cleaned = 0.000194294 Jy
! Component: 850  -  total flux cleaned = 0.000342049 Jy
! Component: 900  -  total flux cleaned = 0.000533957 Jy
! Component: 950  -  total flux cleaned = 0.000533431 Jy
! Component: 1000  -  total flux cleaned = 0.000488563 Jy
! Component: 1050  -  total flux cleaned = 0.000623459 Jy
! Component: 1100  -  total flux cleaned = 0.000622785 Jy
! Component: 1150  -  total flux cleaned = 0.000793996 Jy
! Component: 1200  -  total flux cleaned = 0.000836504 Jy
! Component: 1250  -  total flux cleaned = 0.00116996 Jy
! Component: 1300  -  total flux cleaned = 0.00121045 Jy
! Component: 1350  -  total flux cleaned = 0.00129178 Jy
! Component: 1400  -  total flux cleaned = 0.0014516 Jy
! Component: 1450  -  total flux cleaned = 0.00153061 Jy
! Component: 1500  -  total flux cleaned = 0.0016861 Jy
! Component: 1550  -  total flux cleaned = 0.00183925 Jy
! Component: 1600  -  total flux cleaned = 0.00187709 Jy
! Component: 1650  -  total flux cleaned = 0.00187728 Jy
! Component: 1700  -  total flux cleaned = 0.00198912 Jy
! Component: 1750  -  total flux cleaned = 0.00198897 Jy
! Component: 1800  -  total flux cleaned = 0.00206202 Jy
! Component: 1850  -  total flux cleaned = 0.00213436 Jy
! Component: 1900  -  total flux cleaned = 0.00217017 Jy
! Component: 1950  -  total flux cleaned = 0.00227698 Jy
! Component: 2000  -  total flux cleaned = 0.00231194 Jy
! Component: 2050  -  total flux cleaned = 0.00238183 Jy
! Component: 2100  -  total flux cleaned = 0.00238172 Jy
! Component: 2150  -  total flux cleaned = 0.00234763 Jy
! Component: 2200  -  total flux cleaned = 0.00234778 Jy
! Component: 2250  -  total flux cleaned = 0.00241576 Jy
! Component: 2300  -  total flux cleaned = 0.00244937 Jy
! Component: 2350  -  total flux cleaned = 0.00244936 Jy
! Component: 2400  -  total flux cleaned = 0.00244935 Jy
! Component: 2450  -  total flux cleaned = 0.00238295 Jy
! Component: 2500  -  total flux cleaned = 0.00238313 Jy
! Component: 2550  -  total flux cleaned = 0.00235044 Jy
! Component: 2600  -  total flux cleaned = 0.00228509 Jy
! Component: 2650  -  total flux cleaned = 0.00241547 Jy
! Component: 2700  -  total flux cleaned = 0.00241544 Jy
! Component: 2750  -  total flux cleaned = 0.00235085 Jy
! Component: 2800  -  total flux cleaned = 0.0024153 Jy
! Component: 2850  -  total flux cleaned = 0.00244748 Jy
! Component: 2900  -  total flux cleaned = 0.00247929 Jy
! Component: 2950  -  total flux cleaned = 0.0025429 Jy
! Component: 3000  -  total flux cleaned = 0.0025745 Jy
! Component: 3050  -  total flux cleaned = 0.00257446 Jy
! Component: 3100  -  total flux cleaned = 0.00260584 Jy
! Component: 3150  -  total flux cleaned = 0.00260588 Jy
! Component: 3200  -  total flux cleaned = 0.00273062 Jy
! Component: 3250  -  total flux cleaned = 0.00269959 Jy
! Component: 3300  -  total flux cleaned = 0.00276201 Jy
! Component: 3350  -  total flux cleaned = 0.00279301 Jy
! Component: 3400  -  total flux cleaned = 0.00285476 Jy
! Component: 3450  -  total flux cleaned = 0.00285486 Jy
! Component: 3500  -  total flux cleaned = 0.00291637 Jy
! Component: 3550  -  total flux cleaned = 0.00294706 Jy
! Component: 3600  -  total flux cleaned = 0.00294688 Jy
! Component: 3650  -  total flux cleaned = 0.00303893 Jy
! Component: 3700  -  total flux cleaned = 0.00310023 Jy
! Component: 3750  -  total flux cleaned = 0.00310037 Jy
! Component: 3800  -  total flux cleaned = 0.00316183 Jy
! Component: 3850  -  total flux cleaned = 0.00328441 Jy
! Component: 3900  -  total flux cleaned = 0.00334583 Jy
! Component: 3950  -  total flux cleaned = 0.00340691 Jy
! Component: 4000  -  total flux cleaned = 0.00349872 Jy
! Component: 4050  -  total flux cleaned = 0.0035602 Jy
! Total flux subtracted in 4096 components = 0.00362157 Jy
! Clean residual min=-0.001608 max=0.002372 Jy/beam
! Clean residual mean=-0.000002 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.791763 Jy
keep
! Adding 249 model components to the UV plane model.
! The established model now contains 369 components and 0.791764 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1302+5748_S_f_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.081 x 10.38 at -57.97 degrees (North through East)
! Clean map  min=-0.0087664  max=0.77281 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1302+5748_S_f_map.fits
wmodel /image_prod/ug002_uva//J1302+5748_S_f_map.mod
! Writing 369 model components to file: /image_prod/ug002_uva//J1302+5748_S_f_map.mod
wobs   /image_prod/ug002_uva//J1302+5748_S_f_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1302+5748_S_f_uvs.fits
wwins  /image_prod/ug002_uva//J1302+5748_S_f_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1302+5748_S_f_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.772806 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000464639 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.180371 0.180371 0.360742 0.721483 1.44297 2.88593 5.77187 11.5437 23.0875 46.1749 92.3499
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.772 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1663.24 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1302+5748_S_f_dfm.log closed on Thu Mar  5 00:58:43 2020