! Started logfile: /image_prod/ug002_uva//J1251-3440_S_dfm.log on Thu Mar 5 00:51:40 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1251-3440_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1251-3440_S_uva.fits ! AN table 1: 60 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.999405 visibilities/baseline/integration-bin. ! Found source: J1251-3440 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5037 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1251-3440_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.006587Jy sigma=6.547285 ! Fit after self-cal, rms=0.941594Jy sigma=6.112011 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.469 mas, bmaj=6.305 mas, bpa=-4.373 degrees ! Estimated noise=2.70461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475089 Jy ! Component: 100 - total flux cleaned = 0.0591994 Jy ! Total flux subtracted in 100 components = 0.0591994 Jy ! Clean residual min=-0.006664 max=0.006654 Jy/beam ! Clean residual mean=-0.000004 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.0591994 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0591994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082574Jy sigma=0.490672 ! Fit after self-cal, rms=0.080991Jy sigma=0.481069 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=7.794 mas, bpa=-4.216 degrees ! Estimated noise=1.57027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00684835 Jy ! Component: 100 - total flux cleaned = 0.00929653 Jy ! Component: 150 - total flux cleaned = 0.00959979 Jy ! Component: 200 - total flux cleaned = 0.00971444 Jy ! Total flux subtracted in 200 components = 0.00971444 Jy ! Clean residual min=-0.002881 max=0.002747 Jy/beam ! Clean residual mean=0.000001 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.0689139 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.0689139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080518Jy sigma=0.477463 ! Fit after self-cal, rms=0.080518Jy sigma=0.477376 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 7.794 at -4.216 degrees (North through East) ! Clean map min=-0.0027183 max=0.062819 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 1.02 LA 1.06 MK 0.96 ! NL 1.07 OV 0.99 PT 0.99 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 KP 0.98 LA 0.92 MK 1.08 ! NL 1.10 OV 1.01 PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 0.96 LA 0.98 MK 0.99 ! NL 0.95 OV 0.98 PT 1.05 SC 0.93 ! ! ! Fit before self-cal, rms=0.080518Jy sigma=0.477376 ! Fit after self-cal, rms=0.080263Jy sigma=0.476622 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=7.735 mas, bpa=-3.58 degrees ! Estimated noise=1.55521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505176 Jy ! Component: 100 - total flux cleaned = 0.000444486 Jy ! Component: 150 - total flux cleaned = 0.000418611 Jy ! Component: 200 - total flux cleaned = 0.000373329 Jy ! Total flux subtracted in 200 components = 0.000373329 Jy ! Clean residual min=-0.002700 max=0.002668 Jy/beam ! Clean residual mean=0.000003 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0692872 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.0692872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080239Jy sigma=0.476513 ! Fit after self-cal, rms=0.080282Jy sigma=0.476428 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080282Jy sigma=0.476428 ! Fit after self-cal, rms=0.080968Jy sigma=0.475896 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.668 mas, bpa=-3.365 degrees ! Estimated noise=1.55837 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497112 Jy ! Component: 100 - total flux cleaned = 0.000516589 Jy ! Component: 150 - total flux cleaned = 0.000515986 Jy ! Component: 200 - total flux cleaned = 0.000516672 Jy ! Total flux subtracted in 200 components = 0.000516672 Jy ! Clean residual min=-0.002699 max=0.002505 Jy/beam ! Clean residual mean=-0.000005 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0698039 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.0698039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080956Jy sigma=0.475853 ! Fit after self-cal, rms=0.080985Jy sigma=0.475803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.01952e-05 Jy ! Component: 100 - total flux cleaned = 5.51601e-05 Jy ! Component: 150 - total flux cleaned = 4.0552e-05 Jy ! Component: 200 - total flux cleaned = 1.61336e-05 Jy ! Total flux subtracted in 200 components = 1.61336e-05 Jy ! Clean residual min=-0.002682 max=0.002517 Jy/beam ! Clean residual mean=-0.000004 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.06982 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.06982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080978Jy sigma=0.475781 ! Fit after self-cal, rms=0.080977Jy sigma=0.475775 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080977Jy sigma=0.475775 ! Fit after self-cal, rms=0.080717Jy sigma=0.475739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=7.625 mas, bpa=-3.361 degrees ! Estimated noise=1.55399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400151 Jy ! Component: 100 - total flux cleaned = 0.000419686 Jy ! Component: 150 - total flux cleaned = 0.000423076 Jy ! Component: 200 - total flux cleaned = 0.000436998 Jy ! Total flux subtracted in 200 components = 0.000436998 Jy ! Clean residual min=-0.002681 max=0.002546 Jy/beam ! Clean residual mean=-0.000005 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.070257 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 29 components and 0.070257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080708Jy sigma=0.475707 ! Fit after self-cal, rms=0.080708Jy sigma=0.475699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.38844e-05 Jy ! Component: 100 - total flux cleaned = 4.12039e-05 Jy ! Component: 150 - total flux cleaned = 3.0051e-05 Jy ! Component: 200 - total flux cleaned = 1.90823e-05 Jy ! Total flux subtracted in 200 components = 1.90823e-05 Jy ! Clean residual min=-0.002691 max=0.002554 Jy/beam ! Clean residual mean=-0.000005 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0702761 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0702761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080704Jy sigma=0.475683 ! Fit after self-cal, rms=0.080702Jy sigma=0.475679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080702Jy sigma=0.475679 ! Fit after self-cal, rms=0.080250Jy sigma=0.475659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.902 mas, bmaj=23.89 mas, bpa=-1.553 degrees ! Estimated noise=1.96658 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561757 Jy ! Component: 100 - total flux cleaned = 0.000572355 Jy ! Component: 150 - total flux cleaned = 0.000582269 Jy ! Component: 200 - total flux cleaned = 0.000591261 Jy ! Total flux subtracted in 200 components = 0.000591261 Jy ! Clean residual min=-0.002716 max=0.002620 Jy/beam ! Clean residual mean=-0.000009 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0708674 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 31 components and 0.0708674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080247Jy sigma=0.475662 ! Fit after self-cal, rms=0.080243Jy sigma=0.475658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.48993e-05 Jy ! Component: 100 - total flux cleaned = -2.60615e-05 Jy ! Component: 150 - total flux cleaned = -1.81148e-05 Jy ! Component: 200 - total flux cleaned = -1.08439e-05 Jy ! Total flux subtracted in 200 components = -1.08439e-05 Jy ! Clean residual min=-0.002718 max=0.002609 Jy/beam ! Clean residual mean=-0.000009 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.0708565 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 31 components and 0.0708565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080242Jy sigma=0.475671 ! Fit after self-cal, rms=0.080242Jy sigma=0.475669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.591 mas, bpa=-3.369 degrees ! Estimated noise=1.54892 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.591 at -3.369 degrees (North through East) ! Clean map min=-0.0025647 max=0.061288 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=6.191 mas, bpa=-3.589 degrees ! Estimated noise=2.60755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472738 Jy ! Component: 100 - total flux cleaned = 0.0597607 Jy ! Component: 150 - total flux cleaned = 0.0651041 Jy ! Component: 200 - total flux cleaned = 0.0674174 Jy ! Total flux subtracted in 200 components = 0.0674174 Jy ! Clean residual min=-0.005531 max=0.004877 Jy/beam ! Clean residual mean=-0.000004 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.0674174 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0674174 Jy ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.591 mas, bpa=-3.369 degrees ! Estimated noise=1.54892 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289035 Jy ! Component: 100 - total flux cleaned = 0.00351304 Jy ! Component: 150 - total flux cleaned = 0.00360877 Jy ! Component: 200 - total flux cleaned = 0.00360994 Jy ! Total flux subtracted in 200 components = 0.00360994 Jy ! Clean residual min=-0.002735 max=0.002595 Jy/beam ! Clean residual mean=-0.000005 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0710274 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.0710274 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.902 mas, bmaj=23.89 mas, bpa=-1.553 degrees ! Estimated noise=1.96658 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492865 Jy ! Component: 100 - total flux cleaned = 0.000561224 Jy ! Component: 150 - total flux cleaned = 0.000603881 Jy ! Component: 200 - total flux cleaned = 0.000642015 Jy ! Total flux subtracted in 200 components = 0.000642015 Jy ! Clean residual min=-0.002869 max=0.002564 Jy/beam ! Clean residual mean=-0.000007 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.0716694 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.39631e-05 Jy ! Component: 100 - total flux cleaned = 2.41122e-05 Jy ! Component: 150 - total flux cleaned = 1.38111e-05 Jy ! Component: 200 - total flux cleaned = 1.43277e-05 Jy ! Total flux subtracted in 200 components = 1.43277e-05 Jy ! Clean residual min=-0.002888 max=0.002526 Jy/beam ! Clean residual mean=-0.000007 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0716837 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0716837 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.591 mas, bpa=-3.369 degrees ! Estimated noise=1.54892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.15111e-05 Jy ! Component: 100 - total flux cleaned = -2.41853e-05 Jy ! Component: 150 - total flux cleaned = -9.11578e-05 Jy ! Component: 200 - total flux cleaned = -0.000111534 Jy ! Total flux subtracted in 200 components = -0.000111534 Jy ! Clean residual min=-0.002690 max=0.002562 Jy/beam ! Clean residual mean=-0.000004 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0715722 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0715722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080198Jy sigma=0.475471 ! Fit after self-cal, rms=0.080196Jy sigma=0.475401 wmodel J1251-3440_S_map.mod ! Writing 57 model components to file: J1251-3440_S_map.mod wobs J1251-3440_S_uvs.fits ! Writing UV FITS file: J1251-3440_S_uvs.fits wwins J1251-3440_S_map.win ! wwins: Wrote 2 windows to J1251-3440_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.18225e-05 Jy ! Component: 100 - total flux cleaned = -0.000197118 Jy ! Component: 150 - total flux cleaned = -0.00039681 Jy ! Component: 200 - total flux cleaned = -0.000700133 Jy ! Component: 250 - total flux cleaned = -0.00077294 Jy ! Component: 300 - total flux cleaned = -0.000843814 Jy ! Component: 350 - total flux cleaned = -0.000844696 Jy ! Component: 400 - total flux cleaned = -0.000942563 Jy ! Component: 450 - total flux cleaned = -0.00100608 Jy ! Component: 500 - total flux cleaned = -0.000975655 Jy ! Component: 550 - total flux cleaned = -0.000975919 Jy ! Component: 600 - total flux cleaned = -0.000976188 Jy ! Component: 650 - total flux cleaned = -0.000976144 Jy ! Component: 700 - total flux cleaned = -0.000976857 Jy ! Component: 750 - total flux cleaned = -0.000977477 Jy ! Component: 800 - total flux cleaned = -0.00108512 Jy ! Component: 850 - total flux cleaned = -0.00103251 Jy ! Component: 900 - total flux cleaned = -0.00111062 Jy ! Component: 950 - total flux cleaned = -0.00121209 Jy ! Component: 1000 - total flux cleaned = -0.00128718 Jy ! Component: 1050 - total flux cleaned = -0.00143401 Jy ! Component: 1100 - total flux cleaned = -0.00155405 Jy ! Component: 1150 - total flux cleaned = -0.00164873 Jy ! Component: 1200 - total flux cleaned = -0.00169497 Jy ! Component: 1250 - total flux cleaned = -0.00178639 Jy ! Component: 1300 - total flux cleaned = -0.00183171 Jy ! Component: 1350 - total flux cleaned = -0.00198644 Jy ! Component: 1400 - total flux cleaned = -0.00200778 Jy ! Component: 1450 - total flux cleaned = -0.00211459 Jy ! Component: 1500 - total flux cleaned = -0.00211461 Jy ! Component: 1550 - total flux cleaned = -0.0021974 Jy ! Component: 1600 - total flux cleaned = -0.00225818 Jy ! Component: 1650 - total flux cleaned = -0.00229867 Jy ! Component: 1700 - total flux cleaned = -0.00237863 Jy ! Component: 1750 - total flux cleaned = -0.0025559 Jy ! Component: 1800 - total flux cleaned = -0.00271141 Jy ! Component: 1850 - total flux cleaned = -0.00280734 Jy ! Component: 1900 - total flux cleaned = -0.00292144 Jy ! Component: 1950 - total flux cleaned = -0.0030717 Jy ! Component: 2000 - total flux cleaned = -0.00325731 Jy ! Component: 2050 - total flux cleaned = -0.0033489 Jy ! Component: 2100 - total flux cleaned = -0.00351258 Jy ! Component: 2150 - total flux cleaned = -0.00365648 Jy ! Component: 2200 - total flux cleaned = -0.00387022 Jy ! Component: 2250 - total flux cleaned = -0.00399373 Jy ! Component: 2300 - total flux cleaned = -0.00411615 Jy ! Component: 2350 - total flux cleaned = -0.00425469 Jy ! Component: 2400 - total flux cleaned = -0.00440902 Jy ! Component: 2450 - total flux cleaned = -0.00452794 Jy ! Component: 2500 - total flux cleaned = -0.00452799 Jy ! Component: 2550 - total flux cleaned = -0.00462855 Jy ! Component: 2600 - total flux cleaned = -0.0047447 Jy ! Component: 2650 - total flux cleaned = -0.00476106 Jy ! Component: 2700 - total flux cleaned = -0.00482671 Jy ! Component: 2750 - total flux cleaned = -0.00485915 Jy ! Component: 2800 - total flux cleaned = -0.00490789 Jy ! Component: 2850 - total flux cleaned = -0.00497226 Jy ! Component: 2900 - total flux cleaned = -0.0050044 Jy ! Component: 2950 - total flux cleaned = -0.00506813 Jy ! Component: 3000 - total flux cleaned = -0.00511565 Jy ! Component: 3050 - total flux cleaned = -0.00517864 Jy ! Component: 3100 - total flux cleaned = -0.00524138 Jy ! Component: 3150 - total flux cleaned = -0.00533497 Jy ! Component: 3200 - total flux cleaned = -0.00536604 Jy ! Component: 3250 - total flux cleaned = -0.00544331 Jy ! Component: 3300 - total flux cleaned = -0.00550486 Jy ! Component: 3350 - total flux cleaned = -0.00558153 Jy ! Component: 3400 - total flux cleaned = -0.00561204 Jy ! Component: 3450 - total flux cleaned = -0.00568817 Jy ! Component: 3500 - total flux cleaned = -0.00576385 Jy ! Component: 3550 - total flux cleaned = -0.00583936 Jy ! Component: 3600 - total flux cleaned = -0.00591451 Jy ! Component: 3650 - total flux cleaned = -0.00600444 Jy ! Component: 3700 - total flux cleaned = -0.00609397 Jy ! Component: 3750 - total flux cleaned = -0.00615351 Jy ! Component: 3800 - total flux cleaned = -0.00624247 Jy ! Component: 3850 - total flux cleaned = -0.0063016 Jy ! Component: 3900 - total flux cleaned = -0.00640482 Jy ! Component: 3950 - total flux cleaned = -0.00649293 Jy ! Component: 4000 - total flux cleaned = -0.00656628 Jy ! Component: 4050 - total flux cleaned = -0.00659556 Jy ! Total flux subtracted in 4096 components = -0.00668314 Jy ! Clean residual min=-0.000890 max=0.001079 Jy/beam ! Clean residual mean=0.000000 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.064889 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 288 components and 0.0648891 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1251-3440_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.591 at -3.369 degrees (North through East) ! Clean map min=-0.0028649 max=0.060345 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1251-3440_S_map.fits wmodel /image_prod/ug002_uva//J1251-3440_S_map.mod ! Writing 288 model components to file: /image_prod/ug002_uva//J1251-3440_S_map.mod wobs /image_prod/ug002_uva//J1251-3440_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1251-3440_S_uvs.fits wwins /image_prod/ug002_uva//J1251-3440_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1251-3440_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.060345 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000238516 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18576 1.18576 2.37152 4.74304 9.48607 18.9721 37.9443 75.8886 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.06 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 253.002 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1251-3440_S_dfm.log closed on Thu Mar 5 00:51:44 2020