! Started logfile: /image_prod/ug002_uva//J1250+1343_S_dfm.log on Thu Mar  5 00:51:02 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1250+1343_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1250+1343_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.894907 visibilities/baseline/integration-bin.
! Found source: J1250+1343
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5799 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1250+1343_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005031Jy  sigma=8.700798
! Fit after  self-cal, rms=0.884049Jy  sigma=7.672085
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.939 mas, bmaj=6.78 mas, bpa=-2.494 degrees
! Estimated noise=1.43669 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0911021 Jy
! Component: 100  -  total flux cleaned = 0.110968 Jy
! Total flux subtracted in 100 components = 0.110968 Jy
! Clean residual min=-0.005425 max=0.008060 Jy/beam
! Clean residual mean=-0.000002 rms=0.001420 Jy/beam
! Combined flux in latest and established models = 0.110968 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.110968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078432Jy  sigma=0.487356
! Fit after  self-cal, rms=0.078442Jy  sigma=0.487294
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.489 mas, bmaj=7.711 mas, bpa=-4.735 degrees
! Estimated noise=1.12928 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00845791 Jy
! Component: 100  -  total flux cleaned = 0.00925531 Jy
! Component: 150  -  total flux cleaned = 0.00942183 Jy
! Component: 200  -  total flux cleaned = 0.0094225 Jy
! Total flux subtracted in 200 components = 0.0094225 Jy
! Clean residual min=-0.003384 max=0.004584 Jy/beam
! Clean residual mean=0.000003 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.120391 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.120391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077021Jy  sigma=0.474408
! Fit after  self-cal, rms=0.076938Jy  sigma=0.473681
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.489 x 7.711 at -4.735 degrees (North through East)
! Clean map  min=-0.0034973  max=0.11507 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.98     KP        0.99     
!   LA        1.01     MK        1.03     OV        0.88     PT        1.03     
!   SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        1.03     HN        0.94     KP        1.03     
!   LA        1.04     MK        1.02     OV        0.91     PT        1.05     
!   SC        0.75     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.02     HN        0.95     KP        1.03     
!   LA        1.02     MK        0.95     OV        0.98     PT        1.00     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.076938Jy  sigma=0.473681
! Fit after  self-cal, rms=0.068269Jy  sigma=0.464624
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=7.545 mas, bpa=-3.589 degrees
! Estimated noise=1.10928 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00439195 Jy
! Component: 100  -  total flux cleaned = 0.00562844 Jy
! Component: 150  -  total flux cleaned = 0.00619904 Jy
! Component: 200  -  total flux cleaned = 0.0066139 Jy
! Total flux subtracted in 200 components = 0.0066139 Jy
! Clean residual min=-0.002517 max=0.002859 Jy/beam
! Clean residual mean=-0.000001 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.127005 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 59 components and 0.127005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067864Jy  sigma=0.461233
! Fit after  self-cal, rms=0.067814Jy  sigma=0.460826
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067814Jy  sigma=0.460826
! Fit after  self-cal, rms=0.061779Jy  sigma=0.452704
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.41 mas, bmaj=7.511 mas, bpa=-3.409 degrees
! Estimated noise=1.10541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187757 Jy
! Component: 100  -  total flux cleaned = 0.00262103 Jy
! Component: 150  -  total flux cleaned = 0.00301335 Jy
! Component: 200  -  total flux cleaned = 0.00317916 Jy
! Total flux subtracted in 200 components = 0.00317916 Jy
! Clean residual min=-0.001648 max=0.001708 Jy/beam
! Clean residual mean=0.000003 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.130184 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 87 components and 0.130184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061705Jy  sigma=0.451936
! Fit after  self-cal, rms=0.061700Jy  sigma=0.451805
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000388466 Jy
! Component: 100  -  total flux cleaned = 0.000475756 Jy
! Component: 150  -  total flux cleaned = 0.000526277 Jy
! Component: 200  -  total flux cleaned = 0.000572745 Jy
! Total flux subtracted in 200 components = 0.000572745 Jy
! Clean residual min=-0.001664 max=0.001658 Jy/beam
! Clean residual mean=0.000004 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.130757 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 97 components and 0.130757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061673Jy  sigma=0.451617
! Fit after  self-cal, rms=0.061672Jy  sigma=0.451609
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061672Jy  sigma=0.451609
! Fit after  self-cal, rms=0.061522Jy  sigma=0.451501
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.407 mas, bmaj=7.5 mas, bpa=-3.309 degrees
! Estimated noise=1.10493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000766543 Jy
! Component: 100  -  total flux cleaned = 0.00104432 Jy
! Component: 150  -  total flux cleaned = 0.00112994 Jy
! Component: 200  -  total flux cleaned = 0.00120696 Jy
! Total flux subtracted in 200 components = 0.00120696 Jy
! Clean residual min=-0.001530 max=0.001623 Jy/beam
! Clean residual mean=0.000003 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.131964 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 113 components and 0.131964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061500Jy  sigma=0.451332
! Fit after  self-cal, rms=0.061499Jy  sigma=0.451324
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159519 Jy
! Component: 100  -  total flux cleaned = 0.000194292 Jy
! Component: 150  -  total flux cleaned = 0.000194122 Jy
! Component: 200  -  total flux cleaned = 0.000225428 Jy
! Total flux subtracted in 200 components = 0.000225428 Jy
! Clean residual min=-0.001525 max=0.001612 Jy/beam
! Clean residual mean=0.000003 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.132189 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 126 components and 0.132189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061488Jy  sigma=0.451259
! Fit after  self-cal, rms=0.061489Jy  sigma=0.451257
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061489Jy  sigma=0.451257
! Fit after  self-cal, rms=0.061447Jy  sigma=0.451223
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.351 mas, bmaj=11.79 mas, bpa=-2.493 degrees
! Estimated noise=1.36419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754135 Jy
! Component: 100  -  total flux cleaned = 0.00088012 Jy
! Component: 150  -  total flux cleaned = 0.000934505 Jy
! Component: 200  -  total flux cleaned = 0.000935901 Jy
! Total flux subtracted in 200 components = 0.000935901 Jy
! Clean residual min=-0.001564 max=0.001735 Jy/beam
! Clean residual mean=0.000006 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.133125 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 136 components and 0.133125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061434Jy  sigma=0.451195
! Fit after  self-cal, rms=0.061435Jy  sigma=0.451188
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.47266e-05 Jy
! Component: 100  -  total flux cleaned = 8.47405e-05 Jy
! Component: 150  -  total flux cleaned = 8.44614e-05 Jy
! Component: 200  -  total flux cleaned = 8.4784e-05 Jy
! Total flux subtracted in 200 components = 8.4784e-05 Jy
! Clean residual min=-0.001624 max=0.001707 Jy/beam
! Clean residual mean=0.000006 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.13321 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 139 components and 0.13321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061430Jy  sigma=0.451212
! Fit after  self-cal, rms=0.061431Jy  sigma=0.451210
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.406 mas, bmaj=7.493 mas, bpa=-3.207 degrees
! Estimated noise=1.10591 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.406 x 7.493 at -3.207 degrees (North through East)
! Clean map  min=-0.0014398  max=0.11288 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.888 mas, bmaj=6.641 mas, bpa=-1.093 degrees
! Estimated noise=1.37857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0874284 Jy
! Component: 100  -  total flux cleaned = 0.107068 Jy
! Component: 150  -  total flux cleaned = 0.115712 Jy
! Component: 200  -  total flux cleaned = 0.121565 Jy
! Total flux subtracted in 200 components = 0.121565 Jy
! Clean residual min=-0.003092 max=0.003292 Jy/beam
! Clean residual mean=-0.000006 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.121565 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.121565 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.406 mas, bmaj=7.493 mas, bpa=-3.207 degrees
! Estimated noise=1.10591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00503709 Jy
! Component: 100  -  total flux cleaned = 0.00818435 Jy
! Component: 150  -  total flux cleaned = 0.00987882 Jy
! Component: 200  -  total flux cleaned = 0.0104246 Jy
! Total flux subtracted in 200 components = 0.0104246 Jy
! Clean residual min=-0.002025 max=0.001996 Jy/beam
! Clean residual mean=0.000002 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.131989 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 61 components and 0.131989 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.351 mas, bmaj=11.79 mas, bpa=-2.493 degrees
! Estimated noise=1.36419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163468 Jy
! Component: 100  -  total flux cleaned = 0.00157815 Jy
! Component: 150  -  total flux cleaned = 0.00144044 Jy
! Component: 200  -  total flux cleaned = 0.00134571 Jy
! Total flux subtracted in 200 components = 0.00134571 Jy
! Clean residual min=-0.001798 max=0.001761 Jy/beam
! Clean residual mean=0.000006 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.133335 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.15426e-05 Jy
! Component: 100  -  total flux cleaned = -4.10025e-05 Jy
! Component: 150  -  total flux cleaned = -5.86477e-05 Jy
! Component: 200  -  total flux cleaned = -7.51797e-05 Jy
! Total flux subtracted in 200 components = -7.51797e-05 Jy
! Clean residual min=-0.001734 max=0.001759 Jy/beam
! Clean residual mean=0.000006 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.13326 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 86 components and 0.13326 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.406 mas, bmaj=7.493 mas, bpa=-3.207 degrees
! Estimated noise=1.10591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.13445e-05 Jy
! Component: 100  -  total flux cleaned = -0.000244635 Jy
! Component: 150  -  total flux cleaned = -0.00024531 Jy
! Component: 200  -  total flux cleaned = -0.000246992 Jy
! Total flux subtracted in 200 components = -0.000246992 Jy
! Clean residual min=-0.001676 max=0.001679 Jy/beam
! Clean residual mean=0.000003 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.133013 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 97 components and 0.133013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061490Jy  sigma=0.451742
! Fit after  self-cal, rms=0.061487Jy  sigma=0.451699
wmodel J1250+1343_S_map.mod
! Writing 97 model components to file: J1250+1343_S_map.mod
wobs   J1250+1343_S_uvs.fits
! Writing UV FITS file: J1250+1343_S_uvs.fits
wwins  J1250+1343_S_map.win
! wwins: Wrote 2 windows to J1250+1343_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247454 Jy
! Component: 100  -  total flux cleaned = 0.00041953 Jy
! Component: 150  -  total flux cleaned = 0.00066534 Jy
! Component: 200  -  total flux cleaned = 0.000902082 Jy
! Component: 250  -  total flux cleaned = 0.00108082 Jy
! Component: 300  -  total flux cleaned = 0.00123049 Jy
! Component: 350  -  total flux cleaned = 0.00144993 Jy
! Component: 400  -  total flux cleaned = 0.00164098 Jy
! Component: 450  -  total flux cleaned = 0.00189801 Jy
! Component: 500  -  total flux cleaned = 0.00210413 Jy
! Component: 550  -  total flux cleaned = 0.00230637 Jy
! Component: 600  -  total flux cleaned = 0.00248242 Jy
! Component: 650  -  total flux cleaned = 0.00267616 Jy
! Component: 700  -  total flux cleaned = 0.00278219 Jy
! Component: 750  -  total flux cleaned = 0.00288671 Jy
! Component: 800  -  total flux cleaned = 0.00301051 Jy
! Component: 850  -  total flux cleaned = 0.00315208 Jy
! Component: 900  -  total flux cleaned = 0.00329139 Jy
! Component: 950  -  total flux cleaned = 0.00338943 Jy
! Component: 1000  -  total flux cleaned = 0.00348614 Jy
! Component: 1050  -  total flux cleaned = 0.00363775 Jy
! Component: 1100  -  total flux cleaned = 0.00367552 Jy
! Component: 1150  -  total flux cleaned = 0.00380472 Jy
! Component: 1200  -  total flux cleaned = 0.00382345 Jy
! Component: 1250  -  total flux cleaned = 0.00394905 Jy
! Component: 1300  -  total flux cleaned = 0.00396682 Jy
! Component: 1350  -  total flux cleaned = 0.00407201 Jy
! Component: 1400  -  total flux cleaned = 0.00414077 Jy
! Component: 1450  -  total flux cleaned = 0.00422582 Jy
! Component: 1500  -  total flux cleaned = 0.00429294 Jy
! Component: 1550  -  total flux cleaned = 0.00435905 Jy
! Component: 1600  -  total flux cleaned = 0.00444093 Jy
! Component: 1650  -  total flux cleaned = 0.00453805 Jy
! Component: 1700  -  total flux cleaned = 0.00464994 Jy
! Component: 1750  -  total flux cleaned = 0.00472887 Jy
! Component: 1800  -  total flux cleaned = 0.0047756 Jy
! Component: 1850  -  total flux cleaned = 0.00483708 Jy
! Component: 1900  -  total flux cleaned = 0.00486802 Jy
! Component: 1950  -  total flux cleaned = 0.00497354 Jy
! Component: 2000  -  total flux cleaned = 0.0050184 Jy
! Component: 2050  -  total flux cleaned = 0.00507724 Jy
! Component: 2100  -  total flux cleaned = 0.00515019 Jy
! Component: 2150  -  total flux cleaned = 0.00523696 Jy
! Component: 2200  -  total flux cleaned = 0.00520815 Jy
! Component: 2250  -  total flux cleaned = 0.00530717 Jy
! Component: 2300  -  total flux cleaned = 0.00537695 Jy
! Component: 2350  -  total flux cleaned = 0.00541852 Jy
! Component: 2400  -  total flux cleaned = 0.00546001 Jy
! Component: 2450  -  total flux cleaned = 0.00556875 Jy
! Component: 2500  -  total flux cleaned = 0.00563585 Jy
! Component: 2550  -  total flux cleaned = 0.00563587 Jy
! Component: 2600  -  total flux cleaned = 0.00567551 Jy
! Component: 2650  -  total flux cleaned = 0.00570164 Jy
! Component: 2700  -  total flux cleaned = 0.00572774 Jy
! Component: 2750  -  total flux cleaned = 0.0057407 Jy
! Component: 2800  -  total flux cleaned = 0.00576621 Jy
! Component: 2850  -  total flux cleaned = 0.00579142 Jy
! Component: 2900  -  total flux cleaned = 0.00577879 Jy
! Component: 2950  -  total flux cleaned = 0.00579096 Jy
! Component: 3000  -  total flux cleaned = 0.0058403 Jy
! Component: 3050  -  total flux cleaned = 0.00585242 Jy
! Component: 3100  -  total flux cleaned = 0.00582836 Jy
! Component: 3150  -  total flux cleaned = 0.00582842 Jy
! Component: 3200  -  total flux cleaned = 0.00586418 Jy
! Component: 3250  -  total flux cleaned = 0.00586425 Jy
! Component: 3300  -  total flux cleaned = 0.00588773 Jy
! Component: 3350  -  total flux cleaned = 0.00588766 Jy
! Component: 3400  -  total flux cleaned = 0.00589918 Jy
! Component: 3450  -  total flux cleaned = 0.00587639 Jy
! Component: 3500  -  total flux cleaned = 0.00592191 Jy
! Component: 3550  -  total flux cleaned = 0.00591057 Jy
! Component: 3600  -  total flux cleaned = 0.00594416 Jy
! Component: 3650  -  total flux cleaned = 0.00591077 Jy
! Component: 3700  -  total flux cleaned = 0.00591095 Jy
! Component: 3750  -  total flux cleaned = 0.00596575 Jy
! Component: 3800  -  total flux cleaned = 0.00598746 Jy
! Component: 3850  -  total flux cleaned = 0.00595511 Jy
! Component: 3900  -  total flux cleaned = 0.00600871 Jy
! Component: 3950  -  total flux cleaned = 0.00599813 Jy
! Component: 4000  -  total flux cleaned = 0.0060298 Jy
! Component: 4050  -  total flux cleaned = 0.00599821 Jy
! Total flux subtracted in 4096 components = 0.00594604 Jy
! Clean residual min=-0.000591 max=0.000693 Jy/beam
! Clean residual mean=0.000000 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.138959 Jy
keep
! Adding 300 model components to the UV plane model.
! The established model now contains 397 components and 0.138959 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1250+1343_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.406 x 7.493 at -3.207 degrees (North through East)
! Clean map  min=-0.0013187  max=0.11227 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1250+1343_S_map.fits
wmodel /image_prod/ug002_uva//J1250+1343_S_map.mod
! Writing 397 model components to file: /image_prod/ug002_uva//J1250+1343_S_map.mod
wobs   /image_prod/ug002_uva//J1250+1343_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1250+1343_S_uvs.fits
wwins  /image_prod/ug002_uva//J1250+1343_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1250+1343_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.112271 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000193593 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.517299 0.517299 1.0346 2.0692 4.13839 8.27679 16.5536 33.1072 66.2143
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.112 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  579.935 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1250+1343_S_dfm.log closed on Thu Mar  5 00:51:06 2020