! Started logfile: /image_prod/ug002_uva//J1243+7442_X_dfm.log on Thu Mar  5 00:47:36 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1243+7442_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1243+7442_X_uva.fits
! AN table 1: 80 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.926667 visibilities/baseline/integration-bin.
! Found source: J1243+7442
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 40032 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1243+7442_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013960Jy  sigma=8.716227
! Fit after  self-cal, rms=0.832889Jy  sigma=7.157975
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8054 mas, bmaj=0.8609 mas, bpa=-58.35 degrees
! Estimated noise=0.897391 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128139 Jy
! Component: 100  -  total flux cleaned = 0.156176 Jy
! Total flux subtracted in 100 components = 0.156176 Jy
! Clean residual min=-0.004494 max=0.012946 Jy/beam
! Clean residual mean=0.000001 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.156176 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.156176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064850Jy  sigma=0.533676
! Fit after  self-cal, rms=0.064844Jy  sigma=0.533589
! Inverting map 
! Added new window around map position (-1, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123771 Jy
! Component: 100  -  total flux cleaned = 0.0195986 Jy
! Total flux subtracted in 100 components = 0.0195986 Jy
! Clean residual min=-0.003456 max=0.006498 Jy/beam
! Clean residual mean=0.000000 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.175775 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.175775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061444Jy  sigma=0.502173
! Fit after  self-cal, rms=0.061203Jy  sigma=0.500142
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00613959 Jy
! Component: 100  -  total flux cleaned = 0.00999171 Jy
! Total flux subtracted in 100 components = 0.00999171 Jy
! Clean residual min=-0.003403 max=0.004366 Jy/beam
! Clean residual mean=-0.000000 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.185767 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.185767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060221Jy  sigma=0.491065
! Fit after  self-cal, rms=0.060130Jy  sigma=0.490300
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.051 mas, bmaj=1.147 mas, bpa=-64.19 degrees
! Estimated noise=0.416936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00558894 Jy
! Component: 100  -  total flux cleaned = 0.00887074 Jy
! Component: 150  -  total flux cleaned = 0.0109878 Jy
! Component: 200  -  total flux cleaned = 0.0123752 Jy
! Total flux subtracted in 200 components = 0.0123752 Jy
! Clean residual min=-0.003383 max=0.003928 Jy/beam
! Clean residual mean=0.000001 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.198142 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 37 components and 0.198142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059578Jy  sigma=0.485510
! Fit after  self-cal, rms=0.059544Jy  sigma=0.485172
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.051 x 1.147 at -64.19 degrees (North through East)
! Clean map  min=-0.003221  max=0.1642 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.03     KP        1.08     
!   LA        1.00     MK        1.01     NL        1.18     OV        0.93     
!   PT        0.90     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.01     KP        1.05     
!   LA        1.01     MK        1.02     NL        1.17     OV        0.92     
!   PT        0.91     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.01     KP        1.07     
!   LA        0.99     MK        1.01     NL        1.17     OV        0.94     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        0.99     KP        1.05     
!   LA        1.02     MK        1.02     NL        1.18     OV        0.93     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.03     KP        1.07     
!   LA        1.00     MK        0.99     NL        1.15     OV        0.94     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        1.02     KP        1.09     
!   LA        1.01     MK        1.00     NL        1.16     OV        0.94     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.03     KP        1.06     
!   LA        0.99     MK        1.01     NL        1.17     OV        0.91     
!   PT        0.90     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     HN        1.00     KP        1.06     
!   LA        0.99     MK        1.04     NL        1.16     OV        0.95     
!   PT        0.89     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        1.00     KP        1.04     
!   LA        0.99     MK        1.02     NL        1.17     OV        0.91     
!   PT        0.90     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.01     KP        1.07     
!   LA        0.99     MK        1.02     NL        1.15     OV        0.94     
!   PT        0.89     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        1.02     KP        1.02     
!   LA        1.00     MK        1.00     NL        1.15     OV        0.93     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.01     HN        1.01     KP        1.06     
!   LA        1.01     MK        1.00     NL        1.17     OV        0.92     
!   PT        0.89     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059544Jy  sigma=0.485172
! Fit after  self-cal, rms=0.056731Jy  sigma=0.464207
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.151 mas, bpa=-64.5 degrees
! Estimated noise=0.416901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.36406e-05 Jy
! Component: 100  -  total flux cleaned = -0.000401865 Jy
! Component: 150  -  total flux cleaned = -0.000762201 Jy
! Component: 200  -  total flux cleaned = -0.000988412 Jy
! Total flux subtracted in 200 components = -0.000988412 Jy
! Clean residual min=-0.001094 max=0.001192 Jy/beam
! Clean residual mean=0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.197154 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.197154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056673Jy  sigma=0.463791
! Fit after  self-cal, rms=0.056693Jy  sigma=0.463660
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056693Jy  sigma=0.463660
! Fit after  self-cal, rms=0.056879Jy  sigma=0.460853
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=1.151 mas, bpa=-64.07 degrees
! Estimated noise=0.416912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000342288 Jy
! Component: 100  -  total flux cleaned = -0.000308395 Jy
! Component: 150  -  total flux cleaned = -0.000262555 Jy
! Component: 200  -  total flux cleaned = -0.000234772 Jy
! Total flux subtracted in 200 components = -0.000234772 Jy
! Clean residual min=-0.000840 max=0.000851 Jy/beam
! Clean residual mean=0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.196919 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.196919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056869Jy  sigma=0.460773
! Fit after  self-cal, rms=0.056879Jy  sigma=0.460753
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-22.8, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217258 Jy
! Component: 100  -  total flux cleaned = 9.17428e-05 Jy
! Component: 150  -  total flux cleaned = 7.3442e-05 Jy
! Component: 200  -  total flux cleaned = 5.78983e-05 Jy
! Total flux subtracted in 200 components = 5.78983e-05 Jy
! Clean residual min=-0.000830 max=0.000771 Jy/beam
! Clean residual mean=0.000001 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.196977 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.196977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056863Jy  sigma=0.460623
! Fit after  self-cal, rms=0.056863Jy  sigma=0.460621
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056863Jy  sigma=0.460621
! Fit after  self-cal, rms=0.056866Jy  sigma=0.460611
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.151 mas, bpa=-63.99 degrees
! Estimated noise=0.416717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000227642 Jy
! Component: 100  -  total flux cleaned = -0.000313468 Jy
! Component: 150  -  total flux cleaned = -0.000340019 Jy
! Component: 200  -  total flux cleaned = -0.000328002 Jy
! Total flux subtracted in 200 components = -0.000328002 Jy
! Clean residual min=-0.000838 max=0.000765 Jy/beam
! Clean residual mean=0.000001 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.196649 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 86 components and 0.196649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056860Jy  sigma=0.460559
! Fit after  self-cal, rms=0.056860Jy  sigma=0.460558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.88114e-05 Jy
! Component: 100  -  total flux cleaned = -1.65012e-05 Jy
! Component: 150  -  total flux cleaned = 4.39818e-06 Jy
! Component: 200  -  total flux cleaned = 1.41123e-05 Jy
! Total flux subtracted in 200 components = 1.41123e-05 Jy
! Clean residual min=-0.000842 max=0.000772 Jy/beam
! Clean residual mean=0.000001 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.196663 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 90 components and 0.196663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056856Jy  sigma=0.460527
! Fit after  self-cal, rms=0.056856Jy  sigma=0.460525
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056856Jy  sigma=0.460525
! Fit after  self-cal, rms=0.056859Jy  sigma=0.460521
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.442 mas, bmaj=2.67 mas, bpa=-80.3 degrees
! Estimated noise=0.528964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.427e-05 Jy
! Component: 100  -  total flux cleaned = -5.82282e-05 Jy
! Component: 150  -  total flux cleaned = -0.000102045 Jy
! Component: 200  -  total flux cleaned = -0.000121273 Jy
! Total flux subtracted in 200 components = -0.000121273 Jy
! Clean residual min=-0.000691 max=0.000707 Jy/beam
! Clean residual mean=0.000003 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.196542 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.196542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056858Jy  sigma=0.460507
! Fit after  self-cal, rms=0.056858Jy  sigma=0.460507
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.15636e-06 Jy
! Component: 100  -  total flux cleaned = -2.51757e-05 Jy
! Component: 150  -  total flux cleaned = -3.51685e-05 Jy
! Component: 200  -  total flux cleaned = -4.4259e-05 Jy
! Total flux subtracted in 200 components = -4.4259e-05 Jy
! Clean residual min=-0.000694 max=0.000709 Jy/beam
! Clean residual mean=0.000003 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.196497 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 107 components and 0.196497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056858Jy  sigma=0.460505
! Fit after  self-cal, rms=0.056857Jy  sigma=0.460506
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.151 mas, bpa=-63.81 degrees
! Estimated noise=0.416566 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.056 x 1.151 at -63.81 degrees (North through East)
! Clean map  min=-0.0007349  max=0.16379 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8073 mas, bmaj=0.8616 mas, bpa=-57.27 degrees
! Estimated noise=0.902112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128568 Jy
! Component: 100  -  total flux cleaned = 0.158378 Jy
! Component: 150  -  total flux cleaned = 0.17065 Jy
! Component: 200  -  total flux cleaned = 0.17809 Jy
! Total flux subtracted in 200 components = 0.17809 Jy
! Clean residual min=-0.002322 max=0.004150 Jy/beam
! Clean residual mean=0.000001 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.17809 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.17809 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.151 mas, bpa=-63.81 degrees
! Estimated noise=0.416566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00716894 Jy
! Component: 100  -  total flux cleaned = 0.0111625 Jy
! Component: 150  -  total flux cleaned = 0.0135596 Jy
! Component: 200  -  total flux cleaned = 0.0150689 Jy
! Total flux subtracted in 200 components = 0.0150689 Jy
! Clean residual min=-0.000860 max=0.001252 Jy/beam
! Clean residual mean=0.000002 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.193158 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 41 components and 0.193158 Jy
! Inverting map 
! Added new window around map position (-0.8, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123665 Jy
! Component: 100  -  total flux cleaned = 0.00205253 Jy
! Component: 150  -  total flux cleaned = 0.00234266 Jy
! Component: 200  -  total flux cleaned = 0.00242001 Jy
! Total flux subtracted in 200 components = 0.00242001 Jy
! Clean residual min=-0.000818 max=0.000782 Jy/beam
! Clean residual mean=0.000002 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.195578 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 65 components and 0.195578 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.442 mas, bmaj=2.67 mas, bpa=-80.3 degrees
! Estimated noise=0.528964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000544204 Jy
! Component: 100  -  total flux cleaned = 0.000700463 Jy
! Component: 150  -  total flux cleaned = 0.000819496 Jy
! Component: 200  -  total flux cleaned = 0.000917335 Jy
! Total flux subtracted in 200 components = 0.000917335 Jy
! Clean residual min=-0.000669 max=0.000696 Jy/beam
! Clean residual mean=0.000003 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.196496 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.22645e-05 Jy
! Component: 100  -  total flux cleaned = 7.88244e-05 Jy
! Component: 150  -  total flux cleaned = 0.000110035 Jy
! Component: 200  -  total flux cleaned = 0.00013039 Jy
! Total flux subtracted in 200 components = 0.00013039 Jy
! Clean residual min=-0.000659 max=0.000689 Jy/beam
! Clean residual mean=0.000002 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.196626 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 100 components and 0.196626 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.151 mas, bpa=-63.81 degrees
! Estimated noise=0.416566 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.6667e-05 Jy
! Component: 100  -  total flux cleaned = -0.000174047 Jy
! Component: 150  -  total flux cleaned = -0.000205002 Jy
! Component: 200  -  total flux cleaned = -0.000219569 Jy
! Total flux subtracted in 200 components = -0.000219569 Jy
! Clean residual min=-0.000809 max=0.000781 Jy/beam
! Clean residual mean=0.000001 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.196407 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 114 components and 0.196407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056857Jy  sigma=0.460479
! Fit after  self-cal, rms=0.056853Jy  sigma=0.460452
wmodel J1243+7442_X_map.mod
! Writing 114 model components to file: J1243+7442_X_map.mod
wobs   J1243+7442_X_uvs.fits
! Writing UV FITS file: J1243+7442_X_uvs.fits
wwins  J1243+7442_X_map.win
! wwins: Wrote 5 windows to J1243+7442_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 2.57431e-05 Jy
! Component: 100  -  total flux cleaned = 5.27839e-05 Jy
! Component: 150  -  total flux cleaned = 0.000105318 Jy
! Component: 200  -  total flux cleaned = 0.000118154 Jy
! Component: 250  -  total flux cleaned = 0.0001181 Jy
! Component: 300  -  total flux cleaned = 9.38136e-05 Jy
! Component: 350  -  total flux cleaned = 5.8229e-05 Jy
! Component: 400  -  total flux cleaned = 4.64829e-05 Jy
! Component: 450  -  total flux cleaned = 7.74853e-07 Jy
! Component: 500  -  total flux cleaned = 1.20325e-05 Jy
! Component: 550  -  total flux cleaned = 7.39878e-07 Jy
! Component: 600  -  total flux cleaned = 6.8777e-07 Jy
! Component: 650  -  total flux cleaned = -1.02231e-05 Jy
! Component: 700  -  total flux cleaned = -2.10252e-05 Jy
! Component: 750  -  total flux cleaned = -1.04703e-05 Jy
! Component: 800  -  total flux cleaned = -3.7448e-08 Jy
! Component: 850  -  total flux cleaned = 1.04135e-05 Jy
! Component: 900  -  total flux cleaned = 1.03629e-05 Jy
! Component: 950  -  total flux cleaned = 1.24789e-07 Jy
! Component: 1000  -  total flux cleaned = -2.01042e-05 Jy
! Component: 1050  -  total flux cleaned = 2.53945e-08 Jy
! Component: 1100  -  total flux cleaned = -5.95401e-09 Jy
! Component: 1150  -  total flux cleaned = -4.95627e-05 Jy
! Component: 1200  -  total flux cleaned = -4.95887e-05 Jy
! Component: 1250  -  total flux cleaned = -7.87436e-05 Jy
! Component: 1300  -  total flux cleaned = -7.87383e-05 Jy
! Component: 1350  -  total flux cleaned = -9.80098e-05 Jy
! Component: 1400  -  total flux cleaned = -8.84264e-05 Jy
! Component: 1450  -  total flux cleaned = -0.00014541 Jy
! Component: 1500  -  total flux cleaned = -0.000145376 Jy
! Component: 1550  -  total flux cleaned = -0.000136073 Jy
! Component: 1600  -  total flux cleaned = -0.000145354 Jy
! Component: 1650  -  total flux cleaned = -0.000182296 Jy
! Component: 1700  -  total flux cleaned = -0.000136283 Jy
! Component: 1750  -  total flux cleaned = -0.000136267 Jy
! Component: 1800  -  total flux cleaned = -0.000145295 Jy
! Component: 1850  -  total flux cleaned = -0.000163381 Jy
! Component: 1900  -  total flux cleaned = -0.000127349 Jy
! Component: 1950  -  total flux cleaned = -0.000180991 Jy
! Component: 2000  -  total flux cleaned = -0.000136511 Jy
! Component: 2050  -  total flux cleaned = -0.000118849 Jy
! Component: 2100  -  total flux cleaned = -0.00012764 Jy
! Component: 2150  -  total flux cleaned = -0.000127676 Jy
! Component: 2200  -  total flux cleaned = -8.41171e-05 Jy
! Component: 2250  -  total flux cleaned = -8.41673e-05 Jy
! Component: 2300  -  total flux cleaned = -9.27183e-05 Jy
! Component: 2350  -  total flux cleaned = -7.56261e-05 Jy
! Component: 2400  -  total flux cleaned = -7.56549e-05 Jy
! Component: 2450  -  total flux cleaned = -8.41421e-05 Jy
! Component: 2500  -  total flux cleaned = -5.03449e-05 Jy
! Component: 2550  -  total flux cleaned = -4.20186e-05 Jy
! Component: 2600  -  total flux cleaned = -6.70628e-05 Jy
! Component: 2650  -  total flux cleaned = -2.54422e-05 Jy
! Component: 2700  -  total flux cleaned = -8.35726e-05 Jy
! Component: 2750  -  total flux cleaned = -0.000100101 Jy
! Component: 2800  -  total flux cleaned = -0.00010831 Jy
! Component: 2850  -  total flux cleaned = -0.000116484 Jy
! Component: 2900  -  total flux cleaned = -0.000108392 Jy
! Component: 2950  -  total flux cleaned = -0.000132667 Jy
! Component: 3000  -  total flux cleaned = -0.000156888 Jy
! Component: 3050  -  total flux cleaned = -0.000140832 Jy
! Component: 3100  -  total flux cleaned = -0.000140853 Jy
! Component: 3150  -  total flux cleaned = -0.000116893 Jy
! Component: 3200  -  total flux cleaned = -0.000148645 Jy
! Component: 3250  -  total flux cleaned = -0.000109166 Jy
! Component: 3300  -  total flux cleaned = -0.000132764 Jy
! Component: 3350  -  total flux cleaned = -0.000124913 Jy
! Component: 3400  -  total flux cleaned = -0.000117153 Jy
! Component: 3450  -  total flux cleaned = -0.000101605 Jy
! Component: 3500  -  total flux cleaned = -8.60879e-05 Jy
! Component: 3550  -  total flux cleaned = -0.000109241 Jy
! Component: 3600  -  total flux cleaned = -9.38989e-05 Jy
! Component: 3650  -  total flux cleaned = -4.02837e-05 Jy
! Component: 3700  -  total flux cleaned = -5.55972e-05 Jy
! Component: 3750  -  total flux cleaned = -4.0376e-05 Jy
! Component: 3800  -  total flux cleaned = -5.54876e-05 Jy
! Component: 3850  -  total flux cleaned = -5.55412e-05 Jy
! Component: 3900  -  total flux cleaned = -1.05112e-05 Jy
! Component: 3950  -  total flux cleaned = -2.54742e-05 Jy
! Component: 4000  -  total flux cleaned = -2.54305e-05 Jy
! Component: 4050  -  total flux cleaned = -1.80324e-05 Jy
! Total flux subtracted in 4096 components = 4.15926e-06 Jy
! Clean residual min=-0.000431 max=0.000479 Jy/beam
! Clean residual mean=0.000001 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.196411 Jy
keep
! Adding 325 model components to the UV plane model.
! The established model now contains 439 components and 0.196411 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1243+7442_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.056 x 1.151 at -63.81 degrees (North through East)
! Clean map  min=-0.00067119  max=0.16377 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1243+7442_X_map.fits
wmodel /image_prod/ug002_uva//J1243+7442_X_map.mod
! Writing 439 model components to file: /image_prod/ug002_uva//J1243+7442_X_map.mod
wobs   /image_prod/ug002_uva//J1243+7442_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1243+7442_X_uvs.fits
wwins  /image_prod/ug002_uva//J1243+7442_X_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1243+7442_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.163767 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000122832 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.225011 0.225011 0.450022 0.900044 1.80009 3.60018 7.20035 14.4007 28.8014 57.6028
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.163 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1333.27 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1243+7442_X_dfm.log closed on Thu Mar  5 00:47:41 2020