! Started logfile: /image_prod/ug002_uva//J1240-1121_S_dfm.log on Thu Mar  5 00:46:23 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1240-1121_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1240-1121_S_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.881111 visibilities/baseline/integration-bin.
! Found source: J1240-1121
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4758 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1240-1121_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.998458Jy  sigma=7.019184
! Fit after  self-cal, rms=0.875534Jy  sigma=6.185969
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.581 mas, bmaj=6.82 mas, bpa=-0.644 degrees
! Estimated noise=2.32373 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.098013 Jy
! Component: 100  -  total flux cleaned = 0.122452 Jy
! Total flux subtracted in 100 components = 0.122452 Jy
! Clean residual min=-0.006935 max=0.009870 Jy/beam
! Clean residual mean=0.000002 rms=0.001985 Jy/beam
! Combined flux in latest and established models = 0.122452 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.122452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101592Jy  sigma=0.498352
! Fit after  self-cal, rms=0.101569Jy  sigma=0.498288
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.083 mas, bmaj=7.717 mas, bpa=-1.008 degrees
! Estimated noise=1.5079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117832 Jy
! Component: 100  -  total flux cleaned = 0.0167236 Jy
! Component: 150  -  total flux cleaned = 0.0191229 Jy
! Component: 200  -  total flux cleaned = 0.0203766 Jy
! Total flux subtracted in 200 components = 0.0203766 Jy
! Clean residual min=-0.005378 max=0.007264 Jy/beam
! Clean residual mean=0.000006 rms=0.001580 Jy/beam
! Combined flux in latest and established models = 0.142829 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.142829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100227Jy  sigma=0.486143
! Fit after  self-cal, rms=0.100237Jy  sigma=0.486063
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.083 x 7.717 at -1.008 degrees (North through East)
! Clean map  min=-0.0052241  max=0.12785 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.95     HN        1.04     KP        0.98     
!   MK        0.95     NL        1.04     OV        0.88     PT        1.04     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.36     FD        1.01     HN        1.03     KP        0.98     
!   MK        1.00     NL        1.10     OV        0.87     PT        1.10     
!   SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        0.97     KP        1.02     
!   MK        1.02     NL        0.99     OV        0.88     PT        1.03     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.100237Jy  sigma=0.486063
! Fit after  self-cal, rms=0.109245Jy  sigma=0.474903
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.071 mas, bmaj=7.783 mas, bpa=-1.1 degrees
! Estimated noise=1.51389 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450773 Jy
! Component: 100  -  total flux cleaned = 0.00032359 Jy
! Component: 150  -  total flux cleaned = 0.000269073 Jy
! Component: 200  -  total flux cleaned = 0.000167345 Jy
! Total flux subtracted in 200 components = 0.000167345 Jy
! Clean residual min=-0.004538 max=0.005508 Jy/beam
! Clean residual mean=0.000004 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.142996 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 33 components and 0.142996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109119Jy  sigma=0.474582
! Fit after  self-cal, rms=0.109220Jy  sigma=0.474415
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109220Jy  sigma=0.474415
! Fit after  self-cal, rms=0.109313Jy  sigma=0.465967
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.066 mas, bmaj=7.756 mas, bpa=-1.282 degrees
! Estimated noise=1.50999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000385229 Jy
! Component: 100  -  total flux cleaned = 0.000502479 Jy
! Component: 150  -  total flux cleaned = 0.000503462 Jy
! Component: 200  -  total flux cleaned = 0.000503118 Jy
! Total flux subtracted in 200 components = 0.000503118 Jy
! Clean residual min=-0.003278 max=0.003789 Jy/beam
! Clean residual mean=-0.000004 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.143499 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 39 components and 0.143499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109276Jy  sigma=0.465802
! Fit after  self-cal, rms=0.109311Jy  sigma=0.465695
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-67, -102).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00307836 Jy
! Component: 100  -  total flux cleaned = 0.00358026 Jy
! Component: 150  -  total flux cleaned = 0.00377955 Jy
! Component: 200  -  total flux cleaned = 0.00390418 Jy
! Total flux subtracted in 200 components = 0.00390418 Jy
! Clean residual min=-0.002931 max=0.002796 Jy/beam
! Clean residual mean=-0.000003 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.147403 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 0.147403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109195Jy  sigma=0.464671
! Fit after  self-cal, rms=0.109164Jy  sigma=0.464549
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109164Jy  sigma=0.464549
! Fit after  self-cal, rms=0.107941Jy  sigma=0.464417
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.065 mas, bmaj=7.761 mas, bpa=-1.367 degrees
! Estimated noise=1.51297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115976 Jy
! Component: 100  -  total flux cleaned = 0.0014393 Jy
! Component: 150  -  total flux cleaned = 0.00175161 Jy
! Component: 200  -  total flux cleaned = 0.00190661 Jy
! Total flux subtracted in 200 components = 0.00190661 Jy
! Clean residual min=-0.002825 max=0.002671 Jy/beam
! Clean residual mean=-0.000004 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.14931 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 73 components and 0.14931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107904Jy  sigma=0.464179
! Fit after  self-cal, rms=0.107890Jy  sigma=0.464158
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000390255 Jy
! Component: 100  -  total flux cleaned = 0.00041784 Jy
! Component: 150  -  total flux cleaned = 0.000442708 Jy
! Component: 200  -  total flux cleaned = 0.000465023 Jy
! Total flux subtracted in 200 components = 0.000465023 Jy
! Clean residual min=-0.002792 max=0.002675 Jy/beam
! Clean residual mean=-0.000004 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.149775 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.149775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107872Jy  sigma=0.464075
! Fit after  self-cal, rms=0.107868Jy  sigma=0.464072
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107868Jy  sigma=0.464072
! Fit after  self-cal, rms=0.107524Jy  sigma=0.464038
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.418 mas, bmaj=14.04 mas, bpa=0.1131 degrees
! Estimated noise=1.89284 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125572 Jy
! Component: 100  -  total flux cleaned = 0.00148627 Jy
! Component: 150  -  total flux cleaned = 0.0015139 Jy
! Component: 200  -  total flux cleaned = 0.00153781 Jy
! Total flux subtracted in 200 components = 0.00153781 Jy
! Clean residual min=-0.002910 max=0.002631 Jy/beam
! Clean residual mean=-0.000009 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.151313 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 88 components and 0.151313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107509Jy  sigma=0.464112
! Fit after  self-cal, rms=0.107499Jy  sigma=0.464054
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173003 Jy
! Component: 100  -  total flux cleaned = 0.000122661 Jy
! Component: 150  -  total flux cleaned = 7.78311e-05 Jy
! Component: 200  -  total flux cleaned = 1.55587e-05 Jy
! Total flux subtracted in 200 components = 1.55587e-05 Jy
! Clean residual min=-0.002856 max=0.002611 Jy/beam
! Clean residual mean=-0.000009 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.151328 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 91 components and 0.151328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107497Jy  sigma=0.464133
! Fit after  self-cal, rms=0.107494Jy  sigma=0.464112
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.062 mas, bmaj=7.76 mas, bpa=-1.424 degrees
! Estimated noise=1.51647 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.062 x 7.76 at -1.424 degrees (North through East)
! Clean map  min=-0.0026446  max=0.1288 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.571 mas, bmaj=6.88 mas, bpa=-1.045 degrees
! Estimated noise=2.32277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0978083 Jy
! Component: 100  -  total flux cleaned = 0.123183 Jy
! Component: 150  -  total flux cleaned = 0.13407 Jy
! Component: 200  -  total flux cleaned = 0.140004 Jy
! Total flux subtracted in 200 components = 0.140004 Jy
! Clean residual min=-0.004358 max=0.004454 Jy/beam
! Clean residual mean=-0.000001 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.140004 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.140004 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.062 mas, bmaj=7.76 mas, bpa=-1.424 degrees
! Estimated noise=1.51647 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00540811 Jy
! Component: 100  -  total flux cleaned = 0.00869946 Jy
! Component: 150  -  total flux cleaned = 0.0102147 Jy
! Component: 200  -  total flux cleaned = 0.0111128 Jy
! Total flux subtracted in 200 components = 0.0111128 Jy
! Clean residual min=-0.002729 max=0.002558 Jy/beam
! Clean residual mean=-0.000005 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.151116 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 41 components and 0.151116 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.418 mas, bmaj=14.04 mas, bpa=0.1131 degrees
! Estimated noise=1.89284 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000854465 Jy
! Component: 100  -  total flux cleaned = 0.000942021 Jy
! Component: 150  -  total flux cleaned = 0.00105305 Jy
! Component: 200  -  total flux cleaned = 0.00111751 Jy
! Total flux subtracted in 200 components = 0.00111751 Jy
! Clean residual min=-0.003049 max=0.002549 Jy/beam
! Clean residual mean=-0.000008 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.152234 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.9921e-05 Jy
! Component: 100  -  total flux cleaned = 5.734e-05 Jy
! Component: 150  -  total flux cleaned = 8.44773e-05 Jy
! Component: 200  -  total flux cleaned = 0.00010898 Jy
! Total flux subtracted in 200 components = 0.00010898 Jy
! Clean residual min=-0.002931 max=0.002554 Jy/beam
! Clean residual mean=-0.000009 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.152343 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 73 components and 0.152343 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.062 mas, bmaj=7.76 mas, bpa=-1.424 degrees
! Estimated noise=1.51647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.69598e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147067 Jy
! Component: 150  -  total flux cleaned = 0.000148211 Jy
! Component: 200  -  total flux cleaned = 0.000225947 Jy
! Total flux subtracted in 200 components = 0.000225947 Jy
! Clean residual min=-0.002476 max=0.002459 Jy/beam
! Clean residual mean=-0.000004 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.152569 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 90 components and 0.152569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107461Jy  sigma=0.463710
! Fit after  self-cal, rms=0.107463Jy  sigma=0.463639
wmodel J1240-1121_S_map.mod
! Writing 90 model components to file: J1240-1121_S_map.mod
wobs   J1240-1121_S_uvs.fits
! Writing UV FITS file: J1240-1121_S_uvs.fits
wwins  J1240-1121_S_map.win
! wwins: Wrote 3 windows to J1240-1121_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000517223 Jy
! Component: 100  -  total flux cleaned = -0.000687036 Jy
! Component: 150  -  total flux cleaned = -0.000847699 Jy
! Component: 200  -  total flux cleaned = -0.00100017 Jy
! Component: 250  -  total flux cleaned = -0.00114584 Jy
! Component: 300  -  total flux cleaned = -0.00118029 Jy
! Component: 350  -  total flux cleaned = -0.00121339 Jy
! Component: 400  -  total flux cleaned = -0.00111451 Jy
! Component: 450  -  total flux cleaned = -0.00101973 Jy
! Component: 500  -  total flux cleaned = -0.00102053 Jy
! Component: 550  -  total flux cleaned = -0.00105065 Jy
! Component: 600  -  total flux cleaned = -0.00102064 Jy
! Component: 650  -  total flux cleaned = -0.00104886 Jy
! Component: 700  -  total flux cleaned = -0.001048 Jy
! Component: 750  -  total flux cleaned = -0.00112988 Jy
! Component: 800  -  total flux cleaned = -0.00110286 Jy
! Component: 850  -  total flux cleaned = -0.00110299 Jy
! Component: 900  -  total flux cleaned = -0.0011801 Jy
! Component: 950  -  total flux cleaned = -0.00115469 Jy
! Component: 1000  -  total flux cleaned = -0.00108067 Jy
! Component: 1050  -  total flux cleaned = -0.00110512 Jy
! Component: 1100  -  total flux cleaned = -0.00101048 Jy
! Component: 1150  -  total flux cleaned = -0.00101065 Jy
! Component: 1200  -  total flux cleaned = -0.000850538 Jy
! Component: 1250  -  total flux cleaned = -0.000783494 Jy
! Component: 1300  -  total flux cleaned = -0.000761096 Jy
! Component: 1350  -  total flux cleaned = -0.000651564 Jy
! Component: 1400  -  total flux cleaned = -0.000629977 Jy
! Component: 1450  -  total flux cleaned = -0.000566551 Jy
! Component: 1500  -  total flux cleaned = -0.000503999 Jy
! Component: 1550  -  total flux cleaned = -0.000421587 Jy
! Component: 1600  -  total flux cleaned = -0.000360487 Jy
! Component: 1650  -  total flux cleaned = -0.000300067 Jy
! Component: 1700  -  total flux cleaned = -0.000280174 Jy
! Component: 1750  -  total flux cleaned = -0.000240924 Jy
! Component: 1800  -  total flux cleaned = -0.000202282 Jy
! Component: 1850  -  total flux cleaned = -0.000240343 Jy
! Component: 1900  -  total flux cleaned = -0.000240155 Jy
! Component: 1950  -  total flux cleaned = -0.00022152 Jy
! Component: 2000  -  total flux cleaned = -0.000277074 Jy
! Component: 2050  -  total flux cleaned = -0.000313585 Jy
! Component: 2100  -  total flux cleaned = -0.000295449 Jy
! Component: 2150  -  total flux cleaned = -0.000384673 Jy
! Component: 2200  -  total flux cleaned = -0.000278501 Jy
! Component: 2250  -  total flux cleaned = -0.000313863 Jy
! Component: 2300  -  total flux cleaned = -0.000261708 Jy
! Component: 2350  -  total flux cleaned = -0.000296016 Jy
! Component: 2400  -  total flux cleaned = -0.000312852 Jy
! Component: 2450  -  total flux cleaned = -0.000262161 Jy
! Component: 2500  -  total flux cleaned = -0.000278778 Jy
! Component: 2550  -  total flux cleaned = -0.000311979 Jy
! Component: 2600  -  total flux cleaned = -0.000262535 Jy
! Component: 2650  -  total flux cleaned = -0.000213741 Jy
! Component: 2700  -  total flux cleaned = -0.00026221 Jy
! Component: 2750  -  total flux cleaned = -0.000262034 Jy
! Component: 2800  -  total flux cleaned = -0.00026202 Jy
! Component: 2850  -  total flux cleaned = -0.000262102 Jy
! Component: 2900  -  total flux cleaned = -0.000309035 Jy
! Component: 2950  -  total flux cleaned = -0.00030902 Jy
! Component: 3000  -  total flux cleaned = -0.000354886 Jy
! Component: 3050  -  total flux cleaned = -0.000339722 Jy
! Component: 3100  -  total flux cleaned = -0.000339821 Jy
! Component: 3150  -  total flux cleaned = -0.000354936 Jy
! Component: 3200  -  total flux cleaned = -0.000340035 Jy
! Component: 3250  -  total flux cleaned = -0.000369405 Jy
! Component: 3300  -  total flux cleaned = -0.000413343 Jy
! Component: 3350  -  total flux cleaned = -0.000384251 Jy
! Component: 3400  -  total flux cleaned = -0.000398861 Jy
! Component: 3450  -  total flux cleaned = -0.000398971 Jy
! Component: 3500  -  total flux cleaned = -0.000427558 Jy
! Component: 3550  -  total flux cleaned = -0.000484446 Jy
! Component: 3600  -  total flux cleaned = -0.000484549 Jy
! Component: 3650  -  total flux cleaned = -0.000554831 Jy
! Component: 3700  -  total flux cleaned = -0.000582719 Jy
! Component: 3750  -  total flux cleaned = -0.000652052 Jy
! Component: 3800  -  total flux cleaned = -0.000707242 Jy
! Component: 3850  -  total flux cleaned = -0.000693541 Jy
! Component: 3900  -  total flux cleaned = -0.000789167 Jy
! Component: 3950  -  total flux cleaned = -0.000843512 Jy
! Component: 4000  -  total flux cleaned = -0.000870609 Jy
! Component: 4050  -  total flux cleaned = -0.00091099 Jy
! Total flux subtracted in 4096 components = -0.00095122 Jy
! Clean residual min=-0.000862 max=0.000850 Jy/beam
! Clean residual mean=-0.000003 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.151618 Jy
keep
! Adding 250 model components to the UV plane model.
! The established model now contains 340 components and 0.151618 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1240-1121_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.062 x 7.76 at -1.424 degrees (North through East)
! Clean map  min=-0.0016484  max=0.12827 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1240-1121_S_map.fits
wmodel /image_prod/ug002_uva//J1240-1121_S_map.mod
! Writing 340 model components to file: /image_prod/ug002_uva//J1240-1121_S_map.mod
wobs   /image_prod/ug002_uva//J1240-1121_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1240-1121_S_uvs.fits
wwins  /image_prod/ug002_uva//J1240-1121_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1240-1121_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.128273 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000223576 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.522891 0.522891 1.04578 2.09156 4.18313 8.36625 16.7325 33.465 66.93
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.128 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  573.733 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1240-1121_S_dfm.log closed on Thu Mar  5 00:46:27 2020