! Started logfile: /image_prod/ug002_uva//J1239-1137_S_dfm.log on Thu Mar 5 00:46:02 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1239-1137_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1239-1137_S_uva.fits ! AN table 1: 76 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.992951 visibilities/baseline/integration-bin. ! Found source: J1239-1137 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6339 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1239-1137_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.005929Jy sigma=7.547522 ! Fit after self-cal, rms=0.942850Jy sigma=7.074547 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=14.89 mas, bpa=-16.89 degrees ! Estimated noise=1.87827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461002 Jy ! Component: 100 - total flux cleaned = 0.0563337 Jy ! Total flux subtracted in 100 components = 0.0563337 Jy ! Clean residual min=-0.003382 max=0.004030 Jy/beam ! Clean residual mean=-0.000018 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.0563337 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0563337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072882Jy sigma=0.427161 ! Fit after self-cal, rms=0.072357Jy sigma=0.423076 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.602 mas, bmaj=15.44 mas, bpa=-16.73 degrees ! Estimated noise=1.24825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540357 Jy ! Component: 100 - total flux cleaned = 0.00816515 Jy ! Component: 150 - total flux cleaned = 0.00928653 Jy ! Component: 200 - total flux cleaned = 0.00952481 Jy ! Total flux subtracted in 200 components = 0.00952481 Jy ! Clean residual min=-0.002417 max=0.002540 Jy/beam ! Clean residual mean=0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0658585 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.0658585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071971Jy sigma=0.419318 ! Fit after self-cal, rms=0.071988Jy sigma=0.419145 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.602 x 15.44 at -16.73 degrees (North through East) ! Clean map min=-0.0024127 max=0.060321 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.92 HN 1.05 KP 0.94 ! LA 1.02 MK 1.03 OV 1.00 PT 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.04 HN 0.96 KP 1.02 ! LA 1.02 MK 0.99 OV 0.94 PT 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.01 KP 1.02 ! LA 0.96 MK 0.99 OV 0.94 PT 1.06 ! ! ! Fit before self-cal, rms=0.071988Jy sigma=0.419145 ! Fit after self-cal, rms=0.067993Jy sigma=0.418103 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=15.1 mas, bpa=-16.67 degrees ! Estimated noise=1.22878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018912 Jy ! Component: 100 - total flux cleaned = 0.00217937 Jy ! Component: 150 - total flux cleaned = 0.00228384 Jy ! Component: 200 - total flux cleaned = 0.00237013 Jy ! Total flux subtracted in 200 components = 0.00237013 Jy ! Clean residual min=-0.002118 max=0.002044 Jy/beam ! Clean residual mean=0.000004 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0682286 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 0.0682286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067930Jy sigma=0.417559 ! Fit after self-cal, rms=0.067908Jy sigma=0.417458 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067908Jy sigma=0.417458 ! Fit after self-cal, rms=0.066680Jy sigma=0.416684 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=14.89 mas, bpa=-16.55 degrees ! Estimated noise=1.22373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108741 Jy ! Component: 100 - total flux cleaned = 0.00131706 Jy ! Component: 150 - total flux cleaned = 0.00139546 Jy ! Component: 200 - total flux cleaned = 0.00146209 Jy ! Total flux subtracted in 200 components = 0.00146209 Jy ! Clean residual min=-0.001855 max=0.001837 Jy/beam ! Clean residual mean=-0.000000 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0696907 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 72 components and 0.0696907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066645Jy sigma=0.416472 ! Fit after self-cal, rms=0.066624Jy sigma=0.416254 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125262 Jy ! Component: 100 - total flux cleaned = -8.70244e-05 Jy ! Component: 150 - total flux cleaned = -7.05851e-05 Jy ! Component: 200 - total flux cleaned = -5.4881e-05 Jy ! Total flux subtracted in 200 components = -5.4881e-05 Jy ! Clean residual min=-0.001840 max=0.001857 Jy/beam ! Clean residual mean=-0.000000 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0696358 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.0696358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066611Jy sigma=0.416195 ! Fit after self-cal, rms=0.066607Jy sigma=0.416189 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066607Jy sigma=0.416189 ! Fit after self-cal, rms=0.066031Jy sigma=0.416106 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=14.79 mas, bpa=-16.48 degrees ! Estimated noise=1.21968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000688068 Jy ! Component: 100 - total flux cleaned = 0.000857681 Jy ! Component: 150 - total flux cleaned = 0.000944834 Jy ! Component: 200 - total flux cleaned = 0.000989577 Jy ! Total flux subtracted in 200 components = 0.000989577 Jy ! Clean residual min=-0.001818 max=0.001766 Jy/beam ! Clean residual mean=-0.000001 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0706254 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.0706254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066015Jy sigma=0.416029 ! Fit after self-cal, rms=0.066013Jy sigma=0.416018 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.25141e-05 Jy ! Component: 100 - total flux cleaned = 3.92969e-05 Jy ! Component: 150 - total flux cleaned = 5.12779e-05 Jy ! Component: 200 - total flux cleaned = 7.27978e-05 Jy ! Total flux subtracted in 200 components = 7.27978e-05 Jy ! Clean residual min=-0.001798 max=0.001790 Jy/beam ! Clean residual mean=-0.000000 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0706982 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.0706982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066006Jy sigma=0.415998 ! Fit after self-cal, rms=0.066004Jy sigma=0.415995 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066004Jy sigma=0.415995 ! Fit after self-cal, rms=0.065573Jy sigma=0.415968 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.634 mas, bmaj=17.8 mas, bpa=-2.837 degrees ! Estimated noise=1.41291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625586 Jy ! Component: 100 - total flux cleaned = 0.000747912 Jy ! Component: 150 - total flux cleaned = 0.000825528 Jy ! Component: 200 - total flux cleaned = 0.000845397 Jy ! Total flux subtracted in 200 components = 0.000845397 Jy ! Clean residual min=-0.001911 max=0.001919 Jy/beam ! Clean residual mean=-0.000000 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0715436 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 0.0715436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065568Jy sigma=0.415953 ! Fit after self-cal, rms=0.065563Jy sigma=0.415941 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.00532e-05 Jy ! Component: 100 - total flux cleaned = 5.4606e-05 Jy ! Component: 150 - total flux cleaned = 6.21006e-05 Jy ! Component: 200 - total flux cleaned = 6.85665e-05 Jy ! Total flux subtracted in 200 components = 6.85665e-05 Jy ! Clean residual min=-0.001927 max=0.001929 Jy/beam ! Clean residual mean=-0.000000 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0716122 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 0.0716121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065561Jy sigma=0.415946 ! Fit after self-cal, rms=0.065559Jy sigma=0.415943 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=14.73 mas, bpa=-16.45 degrees ! Estimated noise=1.21669 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 14.73 at -16.45 degrees (North through East) ! Clean map min=-0.0019831 max=0.060149 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=14.3 mas, bpa=-16.65 degrees ! Estimated noise=1.83055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455024 Jy ! Component: 100 - total flux cleaned = 0.0567417 Jy ! Component: 150 - total flux cleaned = 0.0620564 Jy ! Component: 200 - total flux cleaned = 0.065252 Jy ! Total flux subtracted in 200 components = 0.065252 Jy ! Clean residual min=-0.003304 max=0.003405 Jy/beam ! Clean residual mean=-0.000016 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.0652519 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0652519 Jy ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=14.73 mas, bpa=-16.45 degrees ! Estimated noise=1.21669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324503 Jy ! Component: 100 - total flux cleaned = 0.00511886 Jy ! Component: 150 - total flux cleaned = 0.00610983 Jy ! Component: 200 - total flux cleaned = 0.00664846 Jy ! Total flux subtracted in 200 components = 0.00664846 Jy ! Clean residual min=-0.002073 max=0.001746 Jy/beam ! Clean residual mean=-0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0719004 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 59 components and 0.0719004 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.634 mas, bmaj=17.8 mas, bpa=-2.837 degrees ! Estimated noise=1.41291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740758 Jy ! Component: 100 - total flux cleaned = 0.00106299 Jy ! Component: 150 - total flux cleaned = 0.00126095 Jy ! Component: 200 - total flux cleaned = 0.00133636 Jy ! Total flux subtracted in 200 components = 0.00133636 Jy ! Clean residual min=-0.001735 max=0.001791 Jy/beam ! Clean residual mean=0.000000 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0732368 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.72256e-05 Jy ! Component: 100 - total flux cleaned = 6.6161e-05 Jy ! Component: 150 - total flux cleaned = 8.56543e-05 Jy ! Component: 200 - total flux cleaned = 8.59347e-05 Jy ! Total flux subtracted in 200 components = 8.59347e-05 Jy ! Clean residual min=-0.001642 max=0.001763 Jy/beam ! Clean residual mean=0.000000 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0733227 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 91 components and 0.0733227 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=14.73 mas, bpa=-16.45 degrees ! Estimated noise=1.21669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190144 Jy ! Component: 100 - total flux cleaned = 0.000263593 Jy ! Component: 150 - total flux cleaned = 0.000245098 Jy ! Component: 200 - total flux cleaned = 0.000226678 Jy ! Total flux subtracted in 200 components = 0.000226678 Jy ! Clean residual min=-0.001659 max=0.001568 Jy/beam ! Clean residual mean=0.000000 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0735494 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 0.0735494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065554Jy sigma=0.415721 ! Fit after self-cal, rms=0.065568Jy sigma=0.415663 wmodel J1239-1137_S_map.mod ! Writing 113 model components to file: J1239-1137_S_map.mod wobs J1239-1137_S_uvs.fits ! Writing UV FITS file: J1239-1137_S_uvs.fits wwins J1239-1137_S_map.win ! wwins: Wrote 2 windows to J1239-1137_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102802 Jy ! Component: 100 - total flux cleaned = 0.000287505 Jy ! Component: 150 - total flux cleaned = 0.000360873 Jy ! Component: 200 - total flux cleaned = 0.00040771 Jy ! Component: 250 - total flux cleaned = 0.000520382 Jy ! Component: 300 - total flux cleaned = 0.000673452 Jy ! Component: 350 - total flux cleaned = 0.000843162 Jy ! Component: 400 - total flux cleaned = 0.00100741 Jy ! Component: 450 - total flux cleaned = 0.00112677 Jy ! Component: 500 - total flux cleaned = 0.00128162 Jy ! Component: 550 - total flux cleaned = 0.00141311 Jy ! Component: 600 - total flux cleaned = 0.00152335 Jy ! Component: 650 - total flux cleaned = 0.00159522 Jy ! Component: 700 - total flux cleaned = 0.00163019 Jy ! Component: 750 - total flux cleaned = 0.00168219 Jy ! Component: 800 - total flux cleaned = 0.0017835 Jy ! Component: 850 - total flux cleaned = 0.00189928 Jy ! Component: 900 - total flux cleaned = 0.00196387 Jy ! Component: 950 - total flux cleaned = 0.00201169 Jy ! Component: 1000 - total flux cleaned = 0.00204315 Jy ! Component: 1050 - total flux cleaned = 0.00213503 Jy ! Component: 1100 - total flux cleaned = 0.00213472 Jy ! Component: 1150 - total flux cleaned = 0.00217906 Jy ! Component: 1200 - total flux cleaned = 0.00220834 Jy ! Component: 1250 - total flux cleaned = 0.0022371 Jy ! Component: 1300 - total flux cleaned = 0.00222297 Jy ! Component: 1350 - total flux cleaned = 0.00225099 Jy ! Component: 1400 - total flux cleaned = 0.00232012 Jy ! Component: 1450 - total flux cleaned = 0.00230652 Jy ! Component: 1500 - total flux cleaned = 0.00230659 Jy ! Component: 1550 - total flux cleaned = 0.00231995 Jy ! Component: 1600 - total flux cleaned = 0.00235921 Jy ! Component: 1650 - total flux cleaned = 0.00238471 Jy ! Component: 1700 - total flux cleaned = 0.00239722 Jy ! Component: 1750 - total flux cleaned = 0.00240977 Jy ! Component: 1800 - total flux cleaned = 0.00238493 Jy ! Component: 1850 - total flux cleaned = 0.00243451 Jy ! Component: 1900 - total flux cleaned = 0.00242228 Jy ! Component: 1950 - total flux cleaned = 0.00241004 Jy ! Component: 2000 - total flux cleaned = 0.00246979 Jy ! Component: 2050 - total flux cleaned = 0.00244598 Jy ! Component: 2100 - total flux cleaned = 0.00245759 Jy ! Component: 2150 - total flux cleaned = 0.00245759 Jy ! Component: 2200 - total flux cleaned = 0.00245754 Jy ! Component: 2250 - total flux cleaned = 0.00249186 Jy ! Component: 2300 - total flux cleaned = 0.00243498 Jy ! Component: 2350 - total flux cleaned = 0.00243506 Jy ! Component: 2400 - total flux cleaned = 0.00243502 Jy ! Component: 2450 - total flux cleaned = 0.00240172 Jy ! Component: 2500 - total flux cleaned = 0.00236868 Jy ! Component: 2550 - total flux cleaned = 0.00236873 Jy ! Component: 2600 - total flux cleaned = 0.00236873 Jy ! Component: 2650 - total flux cleaned = 0.00234703 Jy ! Component: 2700 - total flux cleaned = 0.00231482 Jy ! Component: 2750 - total flux cleaned = 0.00230413 Jy ! Component: 2800 - total flux cleaned = 0.00226172 Jy ! Component: 2850 - total flux cleaned = 0.00223014 Jy ! Component: 2900 - total flux cleaned = 0.00219871 Jy ! Component: 2950 - total flux cleaned = 0.00215704 Jy ! Component: 3000 - total flux cleaned = 0.00211576 Jy ! Component: 3050 - total flux cleaned = 0.00207465 Jy ! Component: 3100 - total flux cleaned = 0.00206444 Jy ! Component: 3150 - total flux cleaned = 0.00204409 Jy ! Component: 3200 - total flux cleaned = 0.00202381 Jy ! Component: 3250 - total flux cleaned = 0.00199361 Jy ! Component: 3300 - total flux cleaned = 0.00195353 Jy ! Component: 3350 - total flux cleaned = 0.00191365 Jy ! Component: 3400 - total flux cleaned = 0.00190373 Jy ! Component: 3450 - total flux cleaned = 0.00186433 Jy ! Component: 3500 - total flux cleaned = 0.00182504 Jy ! Component: 3550 - total flux cleaned = 0.00175664 Jy ! Component: 3600 - total flux cleaned = 0.00173712 Jy ! Component: 3650 - total flux cleaned = 0.00167882 Jy ! Component: 3700 - total flux cleaned = 0.00162084 Jy ! Component: 3750 - total flux cleaned = 0.00159194 Jy ! Component: 3800 - total flux cleaned = 0.00154393 Jy ! Component: 3850 - total flux cleaned = 0.00151518 Jy ! Component: 3900 - total flux cleaned = 0.00148661 Jy ! Component: 3950 - total flux cleaned = 0.00146756 Jy ! Component: 4000 - total flux cleaned = 0.00141054 Jy ! Component: 4050 - total flux cleaned = 0.00136317 Jy ! Total flux subtracted in 4096 components = 0.0013726 Jy ! Clean residual min=-0.000637 max=0.000584 Jy/beam ! Clean residual mean=0.000002 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.074922 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 400 components and 0.074922 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1239-1137_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 14.73 at -16.45 degrees (North through East) ! Clean map min=-0.0018381 max=0.059044 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1239-1137_S_map.fits wmodel /image_prod/ug002_uva//J1239-1137_S_map.mod ! Writing 400 model components to file: /image_prod/ug002_uva//J1239-1137_S_map.mod wobs /image_prod/ug002_uva//J1239-1137_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1239-1137_S_uvs.fits wwins /image_prod/ug002_uva//J1239-1137_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1239-1137_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0590436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000163405 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.830258 0.830258 1.66052 3.32103 6.64206 13.2841 26.5682 53.1365 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.059 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 361.333 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1239-1137_S_dfm.log closed on Thu Mar 5 00:46:06 2020