! Started logfile: /image_prod/ug002_uva//J1229+6335_X_dfm.log on Thu Mar 5 00:41:58 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1229+6335_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1229+6335_X_uva.fits ! AN table 1: 80 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.984722 visibilities/baseline/integration-bin. ! Found source: J1229+6335 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 42540 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1229+6335_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.004230Jy sigma=9.618926 ! Fit after self-cal, rms=0.923681Jy sigma=8.794343 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8673 mas, bmaj=0.875 mas, bpa=-67.11 degrees ! Estimated noise=0.799741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0522887 Jy ! Component: 100 - total flux cleaned = 0.0729252 Jy ! Total flux subtracted in 100 components = 0.0729252 Jy ! Clean residual min=-0.004874 max=0.013050 Jy/beam ! Clean residual mean=-0.000004 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.0729252 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0729252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066462Jy sigma=0.617093 ! Fit after self-cal, rms=0.066021Jy sigma=0.613475 ! Inverting map ! Added new window around map position (-2, 4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146535 Jy ! Component: 100 - total flux cleaned = 0.025247 Jy ! Total flux subtracted in 100 components = 0.025247 Jy ! Clean residual min=-0.003762 max=0.007974 Jy/beam ! Clean residual mean=-0.000003 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.0981722 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.0981721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060601Jy sigma=0.552139 ! Fit after self-cal, rms=0.060479Jy sigma=0.550785 ! Inverting map ! Added new window around map position (-1.6, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00924626 Jy ! Component: 100 - total flux cleaned = 0.0164708 Jy ! Total flux subtracted in 100 components = 0.0164708 Jy ! Clean residual min=-0.003450 max=0.006572 Jy/beam ! Clean residual mean=-0.000002 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.114643 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.114643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058000Jy sigma=0.522643 ! Fit after self-cal, rms=0.057926Jy sigma=0.521856 ! Inverting map ! Added new window around map position (0, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.006973 Jy ! Component: 100 - total flux cleaned = 0.0122411 Jy ! Total flux subtracted in 100 components = 0.0122411 Jy ! Clean residual min=-0.002970 max=0.004696 Jy/beam ! Clean residual mean=-0.000002 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.126884 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 0.126884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056548Jy sigma=0.505999 ! Fit after self-cal, rms=0.056500Jy sigma=0.505525 ! Inverting map ! Added new window around map position (1.2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539209 Jy ! Component: 100 - total flux cleaned = 0.00944269 Jy ! Total flux subtracted in 100 components = 0.00944269 Jy ! Clean residual min=-0.002865 max=0.003716 Jy/beam ! Clean residual mean=-0.000001 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.136327 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.136327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055675Jy sigma=0.496446 ! Fit after self-cal, rms=0.055640Jy sigma=0.496074 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.122 mas, bmaj=1.144 mas, bpa=61.04 degrees ! Estimated noise=0.363991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612153 Jy ! Component: 100 - total flux cleaned = 0.0107358 Jy ! Component: 150 - total flux cleaned = 0.0143535 Jy ! Component: 200 - total flux cleaned = 0.0172851 Jy ! Total flux subtracted in 200 components = 0.0172851 Jy ! Clean residual min=-0.002631 max=0.002415 Jy/beam ! Clean residual mean=-0.000003 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.153612 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 80 components and 0.153612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054719Jy sigma=0.485807 ! Fit after self-cal, rms=0.054699Jy sigma=0.485615 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.122 x 1.144 at 61.04 degrees (North through East) ! Clean map min=-0.002548 max=0.075054 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.99 KP 1.01 ! LA 0.99 MK 1.05 NL 1.15 OV 0.87 ! PT 0.88 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.02 KP 1.02 ! LA 0.97 MK 1.15 NL 1.16 OV 0.89 ! PT 0.87 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.00 KP 1.01 ! LA 1.00 MK 1.11 NL 1.15 OV 0.90 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.99 KP 1.02 ! LA 0.97 MK 1.13 NL 1.17 OV 0.91 ! PT 0.88 SC 1.09 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.02 KP 1.01 ! LA 1.01 MK 1.06 NL 1.15 OV 0.91 ! PT 0.87 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.00 KP 1.00 ! LA 1.01 MK 1.14 NL 1.19 OV 0.86 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.02 KP 1.01 ! LA 1.00 MK 1.09 NL 1.16 OV 0.90 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.01 KP 1.05 ! LA 0.98 MK 1.11 NL 1.16 OV 0.86 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.00 KP 1.02 ! LA 1.01 MK 1.16 NL 1.20 OV 0.89 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.01 KP 1.02 ! LA 0.99 MK 1.11 NL 1.21 OV 0.91 ! PT 0.91 SC 1.08 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.99 KP 1.05 ! LA 0.95 MK 1.05 NL 1.20 OV 0.90 ! PT 0.90 SC 1.07 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 0.97 KP 1.02 ! LA 1.03 MK 1.03 NL 1.19 OV 0.90 ! PT 0.89 SC 1.11 ! ! ! Fit before self-cal, rms=0.054699Jy sigma=0.485615 ! Fit after self-cal, rms=0.054936Jy sigma=0.475211 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.15 mas, bmaj=1.178 mas, bpa=58.8 degrees ! Estimated noise=0.363846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000939791 Jy ! Component: 100 - total flux cleaned = 0.000805566 Jy ! Component: 150 - total flux cleaned = 0.000807685 Jy ! Component: 200 - total flux cleaned = 0.000776394 Jy ! Total flux subtracted in 200 components = 0.000776394 Jy ! Clean residual min=-0.001633 max=0.001604 Jy/beam ! Clean residual mean=0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.154388 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.154388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054860Jy sigma=0.474402 ! Fit after self-cal, rms=0.054902Jy sigma=0.474161 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054902Jy sigma=0.474161 ! Fit after self-cal, rms=0.060308Jy sigma=0.468638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.135 mas, bmaj=1.185 mas, bpa=52.38 degrees ! Estimated noise=0.366405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000599486 Jy ! Component: 100 - total flux cleaned = -0.000602847 Jy ! Component: 150 - total flux cleaned = -0.000603137 Jy ! Component: 200 - total flux cleaned = -0.000577702 Jy ! Total flux subtracted in 200 components = -0.000577702 Jy ! Clean residual min=-0.000877 max=0.001146 Jy/beam ! Clean residual mean=-0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.15381 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 0.15381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060271Jy sigma=0.468212 ! Fit after self-cal, rms=0.060351Jy sigma=0.468091 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.8, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558219 Jy ! Component: 100 - total flux cleaned = 0.000586952 Jy ! Component: 150 - total flux cleaned = 0.000611903 Jy ! Component: 200 - total flux cleaned = 0.000655232 Jy ! Total flux subtracted in 200 components = 0.000655232 Jy ! Clean residual min=-0.000856 max=0.000925 Jy/beam ! Clean residual mean=-0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.154466 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.154466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060324Jy sigma=0.467827 ! Fit after self-cal, rms=0.060322Jy sigma=0.467813 ! Inverting map ! Added new window around map position (-9.6, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000653999 Jy ! Component: 100 - total flux cleaned = 0.000956285 Jy ! Component: 150 - total flux cleaned = 0.00115855 Jy ! Component: 200 - total flux cleaned = 0.00125859 Jy ! Total flux subtracted in 200 components = 0.00125859 Jy ! Clean residual min=-0.000827 max=0.000895 Jy/beam ! Clean residual mean=-0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.155724 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 0.155724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060295Jy sigma=0.467559 ! Fit after self-cal, rms=0.060293Jy sigma=0.467543 ! Inverting map ! Added new window around map position (-3.8, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767393 Jy ! Component: 100 - total flux cleaned = 0.000917438 Jy ! Component: 150 - total flux cleaned = 0.000974526 Jy ! Component: 200 - total flux cleaned = 0.000938976 Jy ! Total flux subtracted in 200 components = 0.000938976 Jy ! Clean residual min=-0.000780 max=0.000846 Jy/beam ! Clean residual mean=-0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.156663 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 139 components and 0.156663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060275Jy sigma=0.467364 ! Fit after self-cal, rms=0.060273Jy sigma=0.467351 ! Inverting map ! Added new window around map position (3, -15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496875 Jy ! Component: 100 - total flux cleaned = 0.000593682 Jy ! Component: 150 - total flux cleaned = 0.000611015 Jy ! Component: 200 - total flux cleaned = 0.000627632 Jy ! Total flux subtracted in 200 components = 0.000627632 Jy ! Clean residual min=-0.000738 max=0.000754 Jy/beam ! Clean residual mean=-0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.157291 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 150 components and 0.157291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060258Jy sigma=0.467216 ! Fit after self-cal, rms=0.060258Jy sigma=0.467209 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060258Jy sigma=0.467209 ! Fit after self-cal, rms=0.061118Jy sigma=0.467131 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.133 mas, bmaj=1.183 mas, bpa=50.98 degrees ! Estimated noise=0.366148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.12534e-05 Jy ! Component: 100 - total flux cleaned = 0.000105457 Jy ! Component: 150 - total flux cleaned = 0.000175916 Jy ! Component: 200 - total flux cleaned = 0.00022503 Jy ! Total flux subtracted in 200 components = 0.00022503 Jy ! Clean residual min=-0.000716 max=0.000735 Jy/beam ! Clean residual mean=-0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.157516 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 154 components and 0.157516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061107Jy sigma=0.467008 ! Fit after self-cal, rms=0.061113Jy sigma=0.467001 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.3975e-05 Jy ! Component: 100 - total flux cleaned = 7.38649e-05 Jy ! Component: 150 - total flux cleaned = 5.98663e-05 Jy ! Component: 200 - total flux cleaned = 7.40155e-05 Jy ! Total flux subtracted in 200 components = 7.40155e-05 Jy ! Clean residual min=-0.000698 max=0.000718 Jy/beam ! Clean residual mean=-0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.15759 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 165 components and 0.15759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061106Jy sigma=0.466939 ! Fit after self-cal, rms=0.061106Jy sigma=0.466937 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061106Jy sigma=0.466937 ! Fit after self-cal, rms=0.061380Jy sigma=0.466922 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=2.686 mas, bpa=67.16 degrees ! Estimated noise=0.445646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.60159e-05 Jy ! Component: 100 - total flux cleaned = -1.41767e-05 Jy ! Component: 150 - total flux cleaned = -2.44333e-05 Jy ! Component: 200 - total flux cleaned = -3.44475e-05 Jy ! Total flux subtracted in 200 components = -3.44475e-05 Jy ! Clean residual min=-0.000840 max=0.000742 Jy/beam ! Clean residual mean=-0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.157555 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 180 components and 0.157555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061378Jy sigma=0.466882 ! Fit after self-cal, rms=0.061379Jy sigma=0.466877 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.28545e-05 Jy ! Component: 100 - total flux cleaned = 1.4106e-05 Jy ! Component: 150 - total flux cleaned = 1.4264e-05 Jy ! Component: 200 - total flux cleaned = 1.38213e-05 Jy ! Total flux subtracted in 200 components = 1.38213e-05 Jy ! Clean residual min=-0.000843 max=0.000738 Jy/beam ! Clean residual mean=-0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.157569 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 189 components and 0.157569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061378Jy sigma=0.466858 ! Fit after self-cal, rms=0.061378Jy sigma=0.466857 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.133 mas, bmaj=1.181 mas, bpa=50.12 degrees ! Estimated noise=0.366095 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.133 x 1.181 at 50.12 degrees (North through East) ! Clean map min=-0.0008766 max=0.07568 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8767 mas, bmaj=0.9008 mas, bpa=47.76 degrees ! Estimated noise=0.817745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529275 Jy ! Component: 100 - total flux cleaned = 0.0746147 Jy ! Component: 150 - total flux cleaned = 0.0897191 Jy ! Component: 200 - total flux cleaned = 0.101304 Jy ! Total flux subtracted in 200 components = 0.101304 Jy ! Clean residual min=-0.003273 max=0.006854 Jy/beam ! Clean residual mean=-0.000002 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.101304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.101304 Jy ! Inverting map and beam ! Estimated beam: bmin=1.133 mas, bmaj=1.181 mas, bpa=50.12 degrees ! Estimated noise=0.366095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014098 Jy ! Component: 100 - total flux cleaned = 0.0238274 Jy ! Component: 150 - total flux cleaned = 0.0307618 Jy ! Component: 200 - total flux cleaned = 0.0358119 Jy ! Total flux subtracted in 200 components = 0.0358119 Jy ! Clean residual min=-0.001518 max=0.003104 Jy/beam ! Clean residual mean=-0.000003 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.137116 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 57 components and 0.137116 Jy ! Inverting map ! Added new window around map position (0, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381233 Jy ! Component: 100 - total flux cleaned = 0.00670283 Jy ! Component: 150 - total flux cleaned = 0.00897675 Jy ! Component: 200 - total flux cleaned = 0.0108003 Jy ! Total flux subtracted in 200 components = 0.0108003 Jy ! Clean residual min=-0.000947 max=0.001176 Jy/beam ! Clean residual mean=-0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.147916 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 78 components and 0.147916 Jy ! Inverting map ! Added new window around map position (2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153801 Jy ! Component: 100 - total flux cleaned = 0.00286969 Jy ! Component: 150 - total flux cleaned = 0.00403508 Jy ! Component: 200 - total flux cleaned = 0.00485787 Jy ! Total flux subtracted in 200 components = 0.00485787 Jy ! Clean residual min=-0.000816 max=0.000860 Jy/beam ! Clean residual mean=-0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.152774 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 99 components and 0.152774 Jy ! Inverting map ! Added new window around map position (-6.2, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870633 Jy ! Component: 100 - total flux cleaned = 0.00144773 Jy ! Component: 150 - total flux cleaned = 0.00197333 Jy ! Component: 200 - total flux cleaned = 0.00245381 Jy ! Total flux subtracted in 200 components = 0.00245381 Jy ! Clean residual min=-0.000724 max=0.000756 Jy/beam ! Clean residual mean=-0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.155228 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 111 components and 0.155228 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=2.686 mas, bpa=67.16 degrees ! Estimated noise=0.445646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823192 Jy ! Component: 100 - total flux cleaned = 0.0013882 Jy ! Component: 150 - total flux cleaned = 0.00166196 Jy ! Component: 200 - total flux cleaned = 0.0017613 Jy ! Total flux subtracted in 200 components = 0.0017613 Jy ! Clean residual min=-0.000863 max=0.000713 Jy/beam ! Clean residual mean=-0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.156989 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.96653e-05 Jy ! Component: 100 - total flux cleaned = 0.000184767 Jy ! Component: 150 - total flux cleaned = 0.000259183 Jy ! Component: 200 - total flux cleaned = 0.00031655 Jy ! Total flux subtracted in 200 components = 0.00031655 Jy ! Clean residual min=-0.000862 max=0.000649 Jy/beam ! Clean residual mean=-0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.157306 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 168 components and 0.157306 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.133 mas, bmaj=1.181 mas, bpa=50.12 degrees ! Estimated noise=0.366095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.71605e-07 Jy ! Component: 100 - total flux cleaned = 4.2912e-05 Jy ! Component: 150 - total flux cleaned = 0.000102108 Jy ! Component: 200 - total flux cleaned = 0.000156793 Jy ! Total flux subtracted in 200 components = 0.000156793 Jy ! Clean residual min=-0.000694 max=0.000712 Jy/beam ! Clean residual mean=-0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.157463 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 180 components and 0.157463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061387Jy sigma=0.466885 ! Fit after self-cal, rms=0.061376Jy sigma=0.466841 wmodel J1229+6335_X_map.mod ! Writing 180 model components to file: J1229+6335_X_map.mod wobs J1229+6335_X_uvs.fits ! Writing UV FITS file: J1229+6335_X_uvs.fits wwins J1229+6335_X_map.win ! wwins: Wrote 13 windows to J1229+6335_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.73715e-05 Jy ! Component: 100 - total flux cleaned = -4.05162e-05 Jy ! Component: 150 - total flux cleaned = -1.67554e-05 Jy ! Component: 200 - total flux cleaned = -5.02925e-06 Jy ! Component: 250 - total flux cleaned = 1.79809e-05 Jy ! Component: 300 - total flux cleaned = 4.05683e-05 Jy ! Component: 350 - total flux cleaned = 7.39212e-05 Jy ! Component: 400 - total flux cleaned = 7.41307e-05 Jy ! Component: 450 - total flux cleaned = 0.000117559 Jy ! Component: 500 - total flux cleaned = 0.000149578 Jy ! Component: 550 - total flux cleaned = 0.000149534 Jy ! Component: 600 - total flux cleaned = 0.000160132 Jy ! Component: 650 - total flux cleaned = 0.000201438 Jy ! Component: 700 - total flux cleaned = 0.000211562 Jy ! Component: 750 - total flux cleaned = 0.000272232 Jy ! Component: 800 - total flux cleaned = 0.000292261 Jy ! Component: 850 - total flux cleaned = 0.000331869 Jy ! Component: 900 - total flux cleaned = 0.000351465 Jy ! Component: 950 - total flux cleaned = 0.000409636 Jy ! Component: 1000 - total flux cleaned = 0.00040961 Jy ! Component: 1050 - total flux cleaned = 0.000428632 Jy ! Component: 1100 - total flux cleaned = 0.000447641 Jy ! Component: 1150 - total flux cleaned = 0.000485195 Jy ! Component: 1200 - total flux cleaned = 0.000503858 Jy ! Component: 1250 - total flux cleaned = 0.000531665 Jy ! Component: 1300 - total flux cleaned = 0.000568413 Jy ! Component: 1350 - total flux cleaned = 0.000568331 Jy ! Component: 1400 - total flux cleaned = 0.000604663 Jy ! Component: 1450 - total flux cleaned = 0.000595689 Jy ! Component: 1500 - total flux cleaned = 0.000595693 Jy ! Component: 1550 - total flux cleaned = 0.000595706 Jy ! Component: 1600 - total flux cleaned = 0.000595751 Jy ! Component: 1650 - total flux cleaned = 0.000622111 Jy ! Component: 1700 - total flux cleaned = 0.000595912 Jy ! Component: 1750 - total flux cleaned = 0.000569835 Jy ! Component: 1800 - total flux cleaned = 0.000621863 Jy ! Component: 1850 - total flux cleaned = 0.000621935 Jy ! Component: 1900 - total flux cleaned = 0.000613357 Jy ! Component: 1950 - total flux cleaned = 0.00060486 Jy ! Component: 2000 - total flux cleaned = 0.000621814 Jy ! Component: 2050 - total flux cleaned = 0.000621788 Jy ! Component: 2100 - total flux cleaned = 0.000638611 Jy ! Component: 2150 - total flux cleaned = 0.000630265 Jy ! Component: 2200 - total flux cleaned = 0.000622028 Jy ! Component: 2250 - total flux cleaned = 0.000663216 Jy ! Component: 2300 - total flux cleaned = 0.000613957 Jy ! Component: 2350 - total flux cleaned = 0.000630362 Jy ! Component: 2400 - total flux cleaned = 0.000638513 Jy ! Component: 2450 - total flux cleaned = 0.000614309 Jy ! Component: 2500 - total flux cleaned = 0.000630376 Jy ! Component: 2550 - total flux cleaned = 0.00059836 Jy ! Component: 2600 - total flux cleaned = 0.000590475 Jy ! Component: 2650 - total flux cleaned = 0.000590474 Jy ! Component: 2700 - total flux cleaned = 0.000606281 Jy ! Component: 2750 - total flux cleaned = 0.000606322 Jy ! Component: 2800 - total flux cleaned = 0.000606307 Jy ! Component: 2850 - total flux cleaned = 0.000598597 Jy ! Component: 2900 - total flux cleaned = 0.000637329 Jy ! Component: 2950 - total flux cleaned = 0.000645025 Jy ! Component: 3000 - total flux cleaned = 0.000644968 Jy ! Component: 3050 - total flux cleaned = 0.00063735 Jy ! Component: 3100 - total flux cleaned = 0.000591677 Jy ! Component: 3150 - total flux cleaned = 0.000629537 Jy ! Component: 3200 - total flux cleaned = 0.000629515 Jy ! Component: 3250 - total flux cleaned = 0.000637079 Jy ! Component: 3300 - total flux cleaned = 0.000614651 Jy ! Component: 3350 - total flux cleaned = 0.000607167 Jy ! Component: 3400 - total flux cleaned = 0.000622036 Jy ! Component: 3450 - total flux cleaned = 0.000636826 Jy ! Component: 3500 - total flux cleaned = 0.000614696 Jy ! Component: 3550 - total flux cleaned = 0.000636728 Jy ! Component: 3600 - total flux cleaned = 0.000629453 Jy ! Component: 3650 - total flux cleaned = 0.000614882 Jy ! Component: 3700 - total flux cleaned = 0.000622137 Jy ! Component: 3750 - total flux cleaned = 0.000658302 Jy ! Component: 3800 - total flux cleaned = 0.00064392 Jy ! Component: 3850 - total flux cleaned = 0.000636749 Jy ! Component: 3900 - total flux cleaned = 0.000643896 Jy ! Component: 3950 - total flux cleaned = 0.000643948 Jy ! Component: 4000 - total flux cleaned = 0.000651041 Jy ! Component: 4050 - total flux cleaned = 0.000651047 Jy ! Total flux subtracted in 4096 components = 0.00060881 Jy ! Clean residual min=-0.000459 max=0.000419 Jy/beam ! Clean residual mean=-0.000000 rms=0.000119 Jy/beam ! Combined flux in latest and established models = 0.158072 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 513 components and 0.158072 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1229+6335_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.133 x 1.181 at 50.12 degrees (North through East) ! Clean map min=-0.00083244 max=0.07597 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1229+6335_X_map.fits wmodel /image_prod/ug002_uva//J1229+6335_X_map.mod ! Writing 513 model components to file: /image_prod/ug002_uva//J1229+6335_X_map.mod wobs /image_prod/ug002_uva//J1229+6335_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1229+6335_X_uvs.fits wwins /image_prod/ug002_uva//J1229+6335_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J1229+6335_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0759704 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000119369 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.471378 0.471378 0.942756 1.88551 3.77102 7.54205 15.0841 30.1682 60.3364 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.075 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 636.431 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1229+6335_X_dfm.log closed on Thu Mar 5 00:42:05 2020