! Started logfile: /image_prod/ug002_uva//J1228+3706_S_g_dfm.log on Thu Mar 5 00:40:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1228+3706_S_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1228+3706_S_g_uva.fits ! AN table 1: 6 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.880952 visibilities/baseline/integration-bin. ! Found source: J1228+3706 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 444 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1228+3706_S_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.066167Jy sigma=14.272541 ! Fit after self-cal, rms=0.663502Jy sigma=8.892733 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=7.746 mas, bpa=25.85 degrees ! Estimated noise=3.37104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257693 Jy ! Component: 100 - total flux cleaned = 0.319258 Jy ! Total flux subtracted in 100 components = 0.319258 Jy ! Clean residual min=-0.019510 max=0.026922 Jy/beam ! Clean residual mean=0.000004 rms=0.006386 Jy/beam ! Combined flux in latest and established models = 0.319258 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.319258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085792Jy sigma=1.137995 ! Fit after self-cal, rms=0.085754Jy sigma=1.136729 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.891 mas, bpa=22.57 degrees ! Estimated noise=2.62992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356794 Jy ! Component: 100 - total flux cleaned = 0.0560736 Jy ! Component: 150 - total flux cleaned = 0.0684001 Jy ! Component: 200 - total flux cleaned = 0.0746426 Jy ! Total flux subtracted in 200 components = 0.0746426 Jy ! Clean residual min=-0.015904 max=0.014886 Jy/beam ! Clean residual mean=-0.000003 rms=0.004043 Jy/beam ! Combined flux in latest and established models = 0.3939 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 0.3939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069281Jy sigma=0.903543 ! Fit after self-cal, rms=0.069080Jy sigma=0.900510 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.891 at 22.57 degrees (North through East) ! Clean map min=-0.015134 max=0.34432 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.06 KP 1.04 ! MK 1.03 NL 0.98 OV 0.88 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.03 HN 1.06 KP 1.09 ! MK 1.02 NL 1.19 OV 0.87 SC 1.25 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.97 KP 1.02 ! MK 1.02 NL 0.88 OV 0.91 SC 0.99 ! ! ! Fit before self-cal, rms=0.069080Jy sigma=0.900510 ! Fit after self-cal, rms=0.056507Jy sigma=0.705301 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.928 mas, bpa=22.57 degrees ! Estimated noise=2.61045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132122 Jy ! Component: 100 - total flux cleaned = -0.00191294 Jy ! Component: 150 - total flux cleaned = -0.00178534 Jy ! Component: 200 - total flux cleaned = -0.00156578 Jy ! Total flux subtracted in 200 components = -0.00156578 Jy ! Clean residual min=-0.007709 max=0.007959 Jy/beam ! Clean residual mean=0.000004 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.392335 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.392335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055789Jy sigma=0.696905 ! Fit after self-cal, rms=0.055815Jy sigma=0.696407 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055815Jy sigma=0.696407 ! Fit after self-cal, rms=0.055774Jy sigma=0.695847 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=7.932 mas, bpa=22.48 degrees ! Estimated noise=2.60524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202604 Jy ! Component: 100 - total flux cleaned = -0.00231459 Jy ! Component: 150 - total flux cleaned = -0.00222923 Jy ! Component: 200 - total flux cleaned = -0.00192486 Jy ! Total flux subtracted in 200 components = -0.00192486 Jy ! Clean residual min=-0.007515 max=0.007099 Jy/beam ! Clean residual mean=0.000003 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.39041 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.39041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055443Jy sigma=0.692118 ! Fit after self-cal, rms=0.055438Jy sigma=0.692002 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.68204e-05 Jy ! Component: 100 - total flux cleaned = 0.000288695 Jy ! Component: 150 - total flux cleaned = 0.000598128 Jy ! Component: 200 - total flux cleaned = 0.000885353 Jy ! Total flux subtracted in 200 components = 0.000885353 Jy ! Clean residual min=-0.007462 max=0.006713 Jy/beam ! Clean residual mean=0.000003 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 0.391295 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.391295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055288Jy sigma=0.690217 ! Fit after self-cal, rms=0.055283Jy sigma=0.690153 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055283Jy sigma=0.690153 ! Fit after self-cal, rms=0.055308Jy sigma=0.689717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=7.934 mas, bpa=22.4 degrees ! Estimated noise=2.60292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180543 Jy ! Component: 100 - total flux cleaned = -0.00197823 Jy ! Component: 150 - total flux cleaned = -0.00203087 Jy ! Component: 200 - total flux cleaned = -0.00203002 Jy ! Total flux subtracted in 200 components = -0.00203002 Jy ! Clean residual min=-0.007275 max=0.006361 Jy/beam ! Clean residual mean=0.000003 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.389265 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.389265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055173Jy sigma=0.688251 ! Fit after self-cal, rms=0.055173Jy sigma=0.688199 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.48418e-05 Jy ! Component: 100 - total flux cleaned = 0.000137598 Jy ! Component: 150 - total flux cleaned = 0.000270619 Jy ! Component: 200 - total flux cleaned = 0.000355929 Jy ! Total flux subtracted in 200 components = 0.000355929 Jy ! Clean residual min=-0.007210 max=0.006203 Jy/beam ! Clean residual mean=0.000003 rms=0.001648 Jy/beam ! Combined flux in latest and established models = 0.389621 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.389621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055108Jy sigma=0.687277 ! Fit after self-cal, rms=0.055107Jy sigma=0.687253 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055107Jy sigma=0.687253 ! Fit after self-cal, rms=0.055148Jy sigma=0.687018 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.891 mas, bmaj=9.033 mas, bpa=14.42 degrees ! Estimated noise=3.1317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283236 Jy ! Component: 100 - total flux cleaned = 0.000437188 Jy ! Component: 150 - total flux cleaned = 0.00034057 Jy ! Component: 200 - total flux cleaned = 0.000259623 Jy ! Total flux subtracted in 200 components = 0.000259623 Jy ! Clean residual min=-0.006862 max=0.005665 Jy/beam ! Clean residual mean=0.000005 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 0.389881 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.389881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055224Jy sigma=0.687388 ! Fit after self-cal, rms=0.055246Jy sigma=0.687176 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.05765e-05 Jy ! Component: 100 - total flux cleaned = 2.43508e-05 Jy ! Component: 150 - total flux cleaned = 2.42991e-05 Jy ! Component: 200 - total flux cleaned = 5.36732e-05 Jy ! Total flux subtracted in 200 components = 5.36732e-05 Jy ! Clean residual min=-0.006811 max=0.005576 Jy/beam ! Clean residual mean=0.000005 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.389934 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.389934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055306Jy sigma=0.687693 ! Fit after self-cal, rms=0.055313Jy sigma=0.687658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.937 mas, bpa=22.34 degrees ! Estimated noise=2.60144 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.12 x 7.937 at 22.34 degrees (North through East) ! Clean map min=-0.0073921 max=0.34141 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=7.739 mas, bpa=25.83 degrees ! Estimated noise=3.38317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.258483 Jy ! Component: 100 - total flux cleaned = 0.317787 Jy ! Component: 150 - total flux cleaned = 0.342781 Jy ! Component: 200 - total flux cleaned = 0.358366 Jy ! Total flux subtracted in 200 components = 0.358366 Jy ! Clean residual min=-0.010428 max=0.014868 Jy/beam ! Clean residual mean=0.000005 rms=0.003091 Jy/beam ! Combined flux in latest and established models = 0.358366 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.358366 Jy ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.937 mas, bpa=22.34 degrees ! Estimated noise=2.60144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153893 Jy ! Component: 100 - total flux cleaned = 0.0232718 Jy ! Component: 150 - total flux cleaned = 0.027588 Jy ! Component: 200 - total flux cleaned = 0.0292773 Jy ! Total flux subtracted in 200 components = 0.0292773 Jy ! Clean residual min=-0.007107 max=0.005240 Jy/beam ! Clean residual mean=0.000003 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.387644 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 39 components and 0.387644 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.891 mas, bmaj=9.033 mas, bpa=14.42 degrees ! Estimated noise=3.1317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145454 Jy ! Component: 100 - total flux cleaned = 0.00295615 Jy ! Component: 150 - total flux cleaned = 0.00397736 Jy ! Component: 200 - total flux cleaned = 0.00495961 Jy ! Total flux subtracted in 200 components = 0.00495961 Jy ! Clean residual min=-0.006888 max=0.004424 Jy/beam ! Clean residual mean=0.000005 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.392603 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000867184 Jy ! Component: 100 - total flux cleaned = 0.00159096 Jy ! Component: 150 - total flux cleaned = 0.00228817 Jy ! Component: 200 - total flux cleaned = 0.00291297 Jy ! Total flux subtracted in 200 components = 0.00291297 Jy ! Clean residual min=-0.006406 max=0.004447 Jy/beam ! Clean residual mean=0.000004 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.395516 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 82 components and 0.395516 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.937 mas, bpa=22.34 degrees ! Estimated noise=2.60144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568245 Jy ! Component: 100 - total flux cleaned = 0.00143404 Jy ! Component: 150 - total flux cleaned = 0.00163652 Jy ! Component: 200 - total flux cleaned = 0.00175429 Jy ! Total flux subtracted in 200 components = 0.00175429 Jy ! Clean residual min=-0.006278 max=0.005432 Jy/beam ! Clean residual mean=0.000002 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.39727 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.39727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054707Jy sigma=0.680578 ! Fit after self-cal, rms=0.054643Jy sigma=0.680070 wmodel J1228+3706_S_g_map.mod ! Writing 97 model components to file: J1228+3706_S_g_map.mod wobs J1228+3706_S_g_uvs.fits ! Writing UV FITS file: J1228+3706_S_g_uvs.fits wwins J1228+3706_S_g_map.win ! wwins: Wrote 2 windows to J1228+3706_S_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167016 Jy ! Component: 100 - total flux cleaned = -0.00203166 Jy ! Component: 150 - total flux cleaned = -0.00244286 Jy ! Component: 200 - total flux cleaned = -0.00221311 Jy ! Component: 250 - total flux cleaned = -0.00185 Jy ! Component: 300 - total flux cleaned = -0.0016451 Jy ! Component: 350 - total flux cleaned = -0.00151257 Jy ! Component: 400 - total flux cleaned = -0.00145029 Jy ! Component: 450 - total flux cleaned = -0.00151081 Jy ! Component: 500 - total flux cleaned = -0.00162761 Jy ! Component: 550 - total flux cleaned = -0.00157094 Jy ! Component: 600 - total flux cleaned = -0.00157075 Jy ! Component: 650 - total flux cleaned = -0.00157057 Jy ! Component: 700 - total flux cleaned = -0.00151882 Jy ! Component: 750 - total flux cleaned = -0.00132278 Jy ! Component: 800 - total flux cleaned = -0.00127513 Jy ! Component: 850 - total flux cleaned = -0.00122862 Jy ! Component: 900 - total flux cleaned = -0.00118459 Jy ! Component: 950 - total flux cleaned = -0.00114073 Jy ! Component: 1000 - total flux cleaned = -0.0011834 Jy ! Component: 1050 - total flux cleaned = -0.00109936 Jy ! Component: 1100 - total flux cleaned = -0.00109916 Jy ! Component: 1150 - total flux cleaned = -0.00105937 Jy ! Component: 1200 - total flux cleaned = -0.00117679 Jy ! Component: 1250 - total flux cleaned = -0.00117612 Jy ! Component: 1300 - total flux cleaned = -0.00117693 Jy ! Component: 1350 - total flux cleaned = -0.00121399 Jy ! Component: 1400 - total flux cleaned = -0.0013227 Jy ! Component: 1450 - total flux cleaned = -0.00150022 Jy ! Component: 1500 - total flux cleaned = -0.00146587 Jy ! Component: 1550 - total flux cleaned = -0.00150052 Jy ! Component: 1600 - total flux cleaned = -0.00150056 Jy ! Component: 1650 - total flux cleaned = -0.00136667 Jy ! Component: 1700 - total flux cleaned = -0.00120128 Jy ! Component: 1750 - total flux cleaned = -0.00100452 Jy ! Component: 1800 - total flux cleaned = -0.000841768 Jy ! Component: 1850 - total flux cleaned = -0.000680958 Jy ! Component: 1900 - total flux cleaned = -0.000585008 Jy ! Component: 1950 - total flux cleaned = -0.000394742 Jy ! Component: 2000 - total flux cleaned = -0.000205744 Jy ! Component: 2050 - total flux cleaned = -8.0228e-05 Jy ! Component: 2100 - total flux cleaned = 0.000107124 Jy ! Component: 2150 - total flux cleaned = 0.00026282 Jy ! Component: 2200 - total flux cleaned = 0.000387035 Jy ! Component: 2250 - total flux cleaned = 0.000511142 Jy ! Component: 2300 - total flux cleaned = 0.000573218 Jy ! Component: 2350 - total flux cleaned = 0.00063529 Jy ! Component: 2400 - total flux cleaned = 0.00069724 Jy ! Component: 2450 - total flux cleaned = 0.000759199 Jy ! Component: 2500 - total flux cleaned = 0.00079031 Jy ! Component: 2550 - total flux cleaned = 0.000852478 Jy ! Component: 2600 - total flux cleaned = 0.000883749 Jy ! Component: 2650 - total flux cleaned = 0.00097739 Jy ! Component: 2700 - total flux cleaned = 0.00104011 Jy ! Component: 2750 - total flux cleaned = 0.0011661 Jy ! Component: 2800 - total flux cleaned = 0.00122935 Jy ! Component: 2850 - total flux cleaned = 0.00126091 Jy ! Component: 2900 - total flux cleaned = 0.00132474 Jy ! Component: 2950 - total flux cleaned = 0.00135646 Jy ! Component: 3000 - total flux cleaned = 0.00142094 Jy ! Component: 3050 - total flux cleaned = 0.00142083 Jy ! Component: 3100 - total flux cleaned = 0.00151836 Jy ! Component: 3150 - total flux cleaned = 0.00158369 Jy ! Component: 3200 - total flux cleaned = 0.00164997 Jy ! Component: 3250 - total flux cleaned = 0.00164999 Jy ! Component: 3300 - total flux cleaned = 0.00171698 Jy ! Component: 3350 - total flux cleaned = 0.00178449 Jy ! Component: 3400 - total flux cleaned = 0.0018526 Jy ! Component: 3450 - total flux cleaned = 0.00188708 Jy ! Component: 3500 - total flux cleaned = 0.00199083 Jy ! Component: 3550 - total flux cleaned = 0.00206042 Jy ! Component: 3600 - total flux cleaned = 0.0020603 Jy ! Component: 3650 - total flux cleaned = 0.00216643 Jy ! Component: 3700 - total flux cleaned = 0.00223776 Jy ! Component: 3750 - total flux cleaned = 0.00230959 Jy ! Component: 3800 - total flux cleaned = 0.00230947 Jy ! Component: 3850 - total flux cleaned = 0.00230936 Jy ! Component: 3900 - total flux cleaned = 0.00230955 Jy ! Component: 3950 - total flux cleaned = 0.00227207 Jy ! Component: 4000 - total flux cleaned = 0.00223386 Jy ! Component: 4050 - total flux cleaned = 0.00223353 Jy ! Total flux subtracted in 4096 components = 0.00215585 Jy ! Clean residual min=-0.002466 max=0.002187 Jy/beam ! Clean residual mean=0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.399426 Jy keep ! Adding 202 model components to the UV plane model. ! The established model now contains 299 components and 0.399426 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1228+3706_S_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.12 x 7.937 at 22.34 degrees (North through East) ! Clean map min=-0.006937 max=0.34155 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1228+3706_S_g_map.fits wmodel /image_prod/ug002_uva//J1228+3706_S_g_map.mod ! Writing 299 model components to file: /image_prod/ug002_uva//J1228+3706_S_g_map.mod wobs /image_prod/ug002_uva//J1228+3706_S_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1228+3706_S_g_uvs.fits wwins /image_prod/ug002_uva//J1228+3706_S_g_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1228+3706_S_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.341548 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000585034 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.513866 0.513866 1.02773 2.05546 4.11093 8.22186 16.4437 32.8874 65.7749 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.341 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 583.809 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1228+3706_S_g_dfm.log closed on Thu Mar 5 00:40:53 2020