! Started logfile: /image_prod/ug002_uva//J1228+3706_S_e_dfm.log on Thu Mar 5 00:40:41 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1228+3706_S_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1228+3706_S_e_uva.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.618056 visibilities/baseline/integration-bin. ! Found source: J1228+3706 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 801 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1228+3706_S_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.067182Jy sigma=9.013558 ! Fit after self-cal, rms=0.661577Jy sigma=5.442706 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=6.983 mas, bpa=28.48 degrees ! Estimated noise=3.75912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269879 Jy ! Component: 100 - total flux cleaned = 0.332079 Jy ! Total flux subtracted in 100 components = 0.332079 Jy ! Clean residual min=-0.014444 max=0.023473 Jy/beam ! Clean residual mean=-0.000023 rms=0.004716 Jy/beam ! Combined flux in latest and established models = 0.332079 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.332079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082127Jy sigma=0.615389 ! Fit after self-cal, rms=0.082059Jy sigma=0.614753 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=7.651 mas, bpa=30.52 degrees ! Estimated noise=3.10784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270889 Jy ! Component: 100 - total flux cleaned = 0.0404369 Jy ! Component: 150 - total flux cleaned = 0.0464314 Jy ! Component: 200 - total flux cleaned = 0.0476104 Jy ! Total flux subtracted in 200 components = 0.0476104 Jy ! Clean residual min=-0.010995 max=0.014760 Jy/beam ! Clean residual mean=0.000024 rms=0.003083 Jy/beam ! Combined flux in latest and established models = 0.379689 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.379689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074020Jy sigma=0.523452 ! Fit after self-cal, rms=0.073960Jy sigma=0.522488 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.898 x 7.651 at 30.52 degrees (North through East) ! Clean map min=-0.010432 max=0.34519 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 0.95 KP 1.00 ! LA 0.98 MK 0.95 OV 0.92 PT 1.14 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.96 KP 1.03 ! LA 1.06 MK 1.00 OV 0.91 PT 1.05 ! SC 1.30 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.97 KP 1.02 ! LA 0.99 MK 1.03 OV 0.91 PT 1.04 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.073960Jy sigma=0.522488 ! Fit after self-cal, rms=0.065654Jy sigma=0.445367 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.976 mas, bmaj=7.587 mas, bpa=29.8 degrees ! Estimated noise=3.07253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00344755 Jy ! Component: 100 - total flux cleaned = -0.00333157 Jy ! Component: 150 - total flux cleaned = -0.00295631 Jy ! Component: 200 - total flux cleaned = -0.0027536 Jy ! Total flux subtracted in 200 components = -0.0027536 Jy ! Clean residual min=-0.006500 max=0.008958 Jy/beam ! Clean residual mean=-0.000013 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 0.376935 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.376935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064330Jy sigma=0.439546 ! Fit after self-cal, rms=0.064334Jy sigma=0.439238 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064334Jy sigma=0.439238 ! Fit after self-cal, rms=0.063716Jy sigma=0.415704 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=7.64 mas, bpa=30.32 degrees ! Estimated noise=3.07049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578221 Jy ! Component: 100 - total flux cleaned = 0.000812526 Jy ! Component: 150 - total flux cleaned = 0.000936624 Jy ! Component: 200 - total flux cleaned = 0.00098265 Jy ! Total flux subtracted in 200 components = 0.00098265 Jy ! Clean residual min=-0.004536 max=0.004557 Jy/beam ! Clean residual mean=-0.000015 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.377918 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.377918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063451Jy sigma=0.414673 ! Fit after self-cal, rms=0.063486Jy sigma=0.414587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151675 Jy ! Component: 100 - total flux cleaned = 0.000148298 Jy ! Component: 150 - total flux cleaned = 0.000149719 Jy ! Component: 200 - total flux cleaned = 0.00015109 Jy ! Total flux subtracted in 200 components = 0.00015109 Jy ! Clean residual min=-0.004529 max=0.004408 Jy/beam ! Clean residual mean=-0.000015 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.378069 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.378069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063418Jy sigma=0.414333 ! Fit after self-cal, rms=0.063417Jy sigma=0.414308 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063417Jy sigma=0.414308 ! Fit after self-cal, rms=0.063848Jy sigma=0.413901 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.931 mas, bmaj=7.648 mas, bpa=30.43 degrees ! Estimated noise=3.07291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473976 Jy ! Component: 100 - total flux cleaned = 0.000655758 Jy ! Component: 150 - total flux cleaned = 0.000693665 Jy ! Component: 200 - total flux cleaned = 0.000763276 Jy ! Total flux subtracted in 200 components = 0.000763276 Jy ! Clean residual min=-0.004542 max=0.004244 Jy/beam ! Clean residual mean=-0.000015 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.378833 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.378833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063746Jy sigma=0.413646 ! Fit after self-cal, rms=0.063747Jy sigma=0.413634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.092e-05 Jy ! Component: 100 - total flux cleaned = 5.75385e-05 Jy ! Component: 150 - total flux cleaned = 5.80795e-05 Jy ! Component: 200 - total flux cleaned = 7.9771e-05 Jy ! Total flux subtracted in 200 components = 7.9771e-05 Jy ! Clean residual min=-0.004523 max=0.004198 Jy/beam ! Clean residual mean=-0.000015 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.378912 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.378912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063717Jy sigma=0.413518 ! Fit after self-cal, rms=0.063717Jy sigma=0.413513 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063717Jy sigma=0.413513 ! Fit after self-cal, rms=0.064040Jy sigma=0.413350 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.375 mas, bmaj=9.809 mas, bpa=23.65 degrees ! Estimated noise=3.53117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282556 Jy ! Component: 100 - total flux cleaned = 0.00043433 Jy ! Component: 150 - total flux cleaned = 0.000534934 Jy ! Component: 200 - total flux cleaned = 0.000640015 Jy ! Total flux subtracted in 200 components = 0.000640015 Jy ! Clean residual min=-0.004033 max=0.005341 Jy/beam ! Clean residual mean=-0.000031 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.379552 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.379552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064000Jy sigma=0.413398 ! Fit after self-cal, rms=0.064008Jy sigma=0.413372 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-40, 77.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502489 Jy ! Component: 100 - total flux cleaned = 0.00714064 Jy ! Component: 150 - total flux cleaned = 0.00829884 Jy ! Component: 200 - total flux cleaned = 0.00889766 Jy ! Total flux subtracted in 200 components = 0.00889766 Jy ! Clean residual min=-0.003091 max=0.002976 Jy/beam ! Clean residual mean=-0.000021 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.38845 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 114 components and 0.38845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063567Jy sigma=0.410417 ! Fit after self-cal, rms=0.063551Jy sigma=0.410214 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.924 mas, bmaj=7.653 mas, bpa=30.52 degrees ! Estimated noise=3.07609 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.924 x 7.653 at 30.52 degrees (North through East) ! Clean map min=-0.0037011 max=0.34138 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=6.983 mas, bpa=28.47 degrees ! Estimated noise=3.69379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264998 Jy ! Component: 100 - total flux cleaned = 0.326415 Jy ! Component: 150 - total flux cleaned = 0.349863 Jy ! Component: 200 - total flux cleaned = 0.360695 Jy ! Total flux subtracted in 200 components = 0.360695 Jy ! Clean residual min=-0.007336 max=0.006542 Jy/beam ! Clean residual mean=-0.000020 rms=0.001826 Jy/beam ! Combined flux in latest and established models = 0.360695 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.360695 Jy ! Inverting map and beam ! Estimated beam: bmin=3.924 mas, bmaj=7.653 mas, bpa=30.52 degrees ! Estimated noise=3.07609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00802301 Jy ! Component: 100 - total flux cleaned = 0.0129716 Jy ! Component: 150 - total flux cleaned = 0.0167963 Jy ! Component: 200 - total flux cleaned = 0.0194841 Jy ! Total flux subtracted in 200 components = 0.0194841 Jy ! Clean residual min=-0.004716 max=0.003897 Jy/beam ! Clean residual mean=-0.000017 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.380179 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 0.380179 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.375 mas, bmaj=9.809 mas, bpa=23.65 degrees ! Estimated noise=3.53117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366743 Jy ! Component: 100 - total flux cleaned = 0.00539032 Jy ! Component: 150 - total flux cleaned = 0.00683164 Jy ! Component: 200 - total flux cleaned = 0.00812329 Jy ! Total flux subtracted in 200 components = 0.00812329 Jy ! Clean residual min=-0.003058 max=0.002854 Jy/beam ! Clean residual mean=-0.000019 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.388303 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814894 Jy ! Component: 100 - total flux cleaned = 0.00127099 Jy ! Component: 150 - total flux cleaned = 0.0016961 Jy ! Component: 200 - total flux cleaned = 0.00199254 Jy ! Total flux subtracted in 200 components = 0.00199254 Jy ! Clean residual min=-0.002903 max=0.002689 Jy/beam ! Clean residual mean=-0.000016 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.390295 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 106 components and 0.390295 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.924 mas, bmaj=7.653 mas, bpa=30.52 degrees ! Estimated noise=3.07609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204457 Jy ! Component: 100 - total flux cleaned = 0.000277638 Jy ! Component: 150 - total flux cleaned = 0.000410633 Jy ! Component: 200 - total flux cleaned = 0.000536264 Jy ! Total flux subtracted in 200 components = 0.000536264 Jy ! Clean residual min=-0.003997 max=0.003503 Jy/beam ! Clean residual mean=-0.000007 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.390832 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 132 components and 0.390832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063233Jy sigma=0.408222 ! Fit after self-cal, rms=0.063220Jy sigma=0.408135 wmodel J1228+3706_S_e_map.mod ! Writing 132 model components to file: J1228+3706_S_e_map.mod wobs J1228+3706_S_e_uvs.fits ! Writing UV FITS file: J1228+3706_S_e_uvs.fits wwins J1228+3706_S_e_map.win ! wwins: Wrote 2 windows to J1228+3706_S_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140306 Jy ! Component: 100 - total flux cleaned = -0.001843 Jy ! Component: 150 - total flux cleaned = -0.00207834 Jy ! Component: 200 - total flux cleaned = -0.00224694 Jy ! Component: 250 - total flux cleaned = -0.00230115 Jy ! Component: 300 - total flux cleaned = -0.00240463 Jy ! Component: 350 - total flux cleaned = -0.00235449 Jy ! Component: 400 - total flux cleaned = -0.00206273 Jy ! Component: 450 - total flux cleaned = -0.00196981 Jy ! Component: 500 - total flux cleaned = -0.00183234 Jy ! Component: 550 - total flux cleaned = -0.00169923 Jy ! Component: 600 - total flux cleaned = -0.00156902 Jy ! Component: 650 - total flux cleaned = -0.00156879 Jy ! Component: 700 - total flux cleaned = -0.00152638 Jy ! Component: 750 - total flux cleaned = -0.00152734 Jy ! Component: 800 - total flux cleaned = -0.00172653 Jy ! Component: 850 - total flux cleaned = -0.00180431 Jy ! Component: 900 - total flux cleaned = -0.00199535 Jy ! Component: 950 - total flux cleaned = -0.00210706 Jy ! Component: 1000 - total flux cleaned = -0.00221777 Jy ! Component: 1050 - total flux cleaned = -0.00239881 Jy ! Component: 1100 - total flux cleaned = -0.00246966 Jy ! Component: 1150 - total flux cleaned = -0.00261023 Jy ! Component: 1200 - total flux cleaned = -0.00278224 Jy ! Component: 1250 - total flux cleaned = -0.00288451 Jy ! Component: 1300 - total flux cleaned = -0.00305189 Jy ! Component: 1350 - total flux cleaned = -0.00318401 Jy ! Component: 1400 - total flux cleaned = -0.00337842 Jy ! Component: 1450 - total flux cleaned = -0.00344195 Jy ! Component: 1500 - total flux cleaned = -0.0034734 Jy ! Component: 1550 - total flux cleaned = -0.00350479 Jy ! Component: 1600 - total flux cleaned = -0.00356626 Jy ! Component: 1650 - total flux cleaned = -0.00362666 Jy ! Component: 1700 - total flux cleaned = -0.00371652 Jy ! Component: 1750 - total flux cleaned = -0.00368661 Jy ! Component: 1800 - total flux cleaned = -0.00371614 Jy ! Component: 1850 - total flux cleaned = -0.00377402 Jy ! Component: 1900 - total flux cleaned = -0.00374588 Jy ! Component: 1950 - total flux cleaned = -0.00383082 Jy ! Component: 2000 - total flux cleaned = -0.00385892 Jy ! Component: 2050 - total flux cleaned = -0.00383106 Jy ! Component: 2100 - total flux cleaned = -0.0038586 Jy ! Component: 2150 - total flux cleaned = -0.00391278 Jy ! Component: 2200 - total flux cleaned = -0.00388565 Jy ! Component: 2250 - total flux cleaned = -0.00380579 Jy ! Component: 2300 - total flux cleaned = -0.00385907 Jy ! Component: 2350 - total flux cleaned = -0.00385929 Jy ! Component: 2400 - total flux cleaned = -0.00388511 Jy ! Component: 2450 - total flux cleaned = -0.00388513 Jy ! Component: 2500 - total flux cleaned = -0.00385954 Jy ! Component: 2550 - total flux cleaned = -0.00380893 Jy ! Component: 2600 - total flux cleaned = -0.00383415 Jy ! Component: 2650 - total flux cleaned = -0.00383408 Jy ! Component: 2700 - total flux cleaned = -0.00378444 Jy ! Component: 2750 - total flux cleaned = -0.00378449 Jy ! Component: 2800 - total flux cleaned = -0.00376001 Jy ! Component: 2850 - total flux cleaned = -0.00378411 Jy ! Component: 2900 - total flux cleaned = -0.00375993 Jy ! Component: 2950 - total flux cleaned = -0.00383176 Jy ! Component: 3000 - total flux cleaned = -0.00383162 Jy ! Component: 3050 - total flux cleaned = -0.00385528 Jy ! Component: 3100 - total flux cleaned = -0.00383167 Jy ! Component: 3150 - total flux cleaned = -0.00380814 Jy ! Component: 3200 - total flux cleaned = -0.0038314 Jy ! Component: 3250 - total flux cleaned = -0.00376205 Jy ! Component: 3300 - total flux cleaned = -0.00373905 Jy ! Component: 3350 - total flux cleaned = -0.00380761 Jy ! Component: 3400 - total flux cleaned = -0.0037621 Jy ! Component: 3450 - total flux cleaned = -0.00373932 Jy ! Component: 3500 - total flux cleaned = -0.00378445 Jy ! Component: 3550 - total flux cleaned = -0.00371689 Jy ! Component: 3600 - total flux cleaned = -0.00360499 Jy ! Component: 3650 - total flux cleaned = -0.00367191 Jy ! Component: 3700 - total flux cleaned = -0.00360516 Jy ! Component: 3750 - total flux cleaned = -0.00358302 Jy ! Component: 3800 - total flux cleaned = -0.00353892 Jy ! Component: 3850 - total flux cleaned = -0.00351689 Jy ! Component: 3900 - total flux cleaned = -0.00351692 Jy ! Component: 3950 - total flux cleaned = -0.00351701 Jy ! Component: 4000 - total flux cleaned = -0.00351703 Jy ! Component: 4050 - total flux cleaned = -0.00351697 Jy ! Total flux subtracted in 4096 components = -0.00360397 Jy ! Clean residual min=-0.001311 max=0.001216 Jy/beam ! Clean residual mean=-0.000010 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.387228 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 377 components and 0.387228 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1228+3706_S_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.924 x 7.653 at 30.52 degrees (North through East) ! Clean map min=-0.0032199 max=0.3408 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1228+3706_S_e_map.fits wmodel /image_prod/ug002_uva//J1228+3706_S_e_map.mod ! Writing 377 model components to file: /image_prod/ug002_uva//J1228+3706_S_e_map.mod wobs /image_prod/ug002_uva//J1228+3706_S_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1228+3706_S_e_uvs.fits wwins /image_prod/ug002_uva//J1228+3706_S_e_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1228+3706_S_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.340801 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000369643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.32539 0.32539 0.650779 1.30156 2.60312 5.20623 10.4125 20.8249 41.6499 83.2998 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.34 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 921.971 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1228+3706_S_e_dfm.log closed on Thu Mar 5 00:40:44 2020