! Started logfile: /image_prod/ug002_uva//J1228+0232_S_dfm.log on Thu Mar  5 00:40:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1228+0232_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1228+0232_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.760185 visibilities/baseline/integration-bin.
! Found source: J1228+0232
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4926 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1228+0232_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.071916Jy  sigma=7.522071
! Fit after  self-cal, rms=0.640817Jy  sigma=4.525727
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=9.843 mas, bpa=-14.6 degrees
! Estimated noise=2.23805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.292938 Jy
! Component: 100  -  total flux cleaned = 0.356824 Jy
! Total flux subtracted in 100 components = 0.356824 Jy
! Clean residual min=-0.012599 max=0.021863 Jy/beam
! Clean residual mean=0.000102 rms=0.004044 Jy/beam
! Combined flux in latest and established models = 0.356824 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.356824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092282Jy  sigma=0.542217
! Fit after  self-cal, rms=0.092271Jy  sigma=0.542199
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.9 mas, bmaj=10.66 mas, bpa=-13.92 degrees
! Estimated noise=1.47176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310131 Jy
! Component: 100  -  total flux cleaned = 0.00210594 Jy
! Component: 150  -  total flux cleaned = 0.00101524 Jy
! Component: 200  -  total flux cleaned = 0.000275057 Jy
! Total flux subtracted in 200 components = 0.000275057 Jy
! Clean residual min=-0.011686 max=0.017442 Jy/beam
! Clean residual mean=0.000125 rms=0.003406 Jy/beam
! Combined flux in latest and established models = 0.357099 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.357099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090096Jy  sigma=0.524655
! Fit after  self-cal, rms=0.090086Jy  sigma=0.524638
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.9 x 10.66 at -13.92 degrees (North through East)
! Clean map  min=-0.011409  max=0.37062 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.94     HN        0.99     KP        1.03     
!   LA        1.00     MK        0.94     OV        0.89     PT        1.19     
!   SC        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        0.97     KP        0.99     
!   LA        1.03     MK        0.97     OV        0.92     PT        1.10     
!   SC        2.31     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.01     KP        0.98     
!   LA        0.96     MK        0.99     OV        0.88     PT        1.13     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.090086Jy  sigma=0.524638
! Fit after  self-cal, rms=0.084431Jy  sigma=0.444719
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.88 mas, bmaj=10.82 mas, bpa=-14.47 degrees
! Estimated noise=1.45738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113373 Jy
! Component: 100  -  total flux cleaned = 0.00128549 Jy
! Component: 150  -  total flux cleaned = 0.00154388 Jy
! Component: 200  -  total flux cleaned = 0.00165731 Jy
! Total flux subtracted in 200 components = 0.00165731 Jy
! Clean residual min=-0.007365 max=0.009550 Jy/beam
! Clean residual mean=0.000077 rms=0.002065 Jy/beam
! Combined flux in latest and established models = 0.358757 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 27 components and 0.358757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083869Jy  sigma=0.441150
! Fit after  self-cal, rms=0.083960Jy  sigma=0.440996
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083960Jy  sigma=0.440996
! Fit after  self-cal, rms=0.079585Jy  sigma=0.389782
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.85 mas, bmaj=10.82 mas, bpa=-14.41 degrees
! Estimated noise=1.4609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171244 Jy
! Component: 100  -  total flux cleaned = 0.00183427 Jy
! Component: 150  -  total flux cleaned = 0.00183446 Jy
! Component: 200  -  total flux cleaned = 0.00183318 Jy
! Total flux subtracted in 200 components = 0.00183318 Jy
! Clean residual min=-0.002569 max=0.002414 Jy/beam
! Clean residual mean=-0.000001 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.36059 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.36059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079469Jy  sigma=0.388802
! Fit after  self-cal, rms=0.079533Jy  sigma=0.388706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.47716e-05 Jy
! Component: 100  -  total flux cleaned = 7.59741e-06 Jy
! Component: 150  -  total flux cleaned = 3.68877e-05 Jy
! Component: 200  -  total flux cleaned = 6.50411e-05 Jy
! Total flux subtracted in 200 components = 6.50411e-05 Jy
! Clean residual min=-0.002501 max=0.002430 Jy/beam
! Clean residual mean=-0.000001 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.360655 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.360655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079496Jy  sigma=0.388503
! Fit after  self-cal, rms=0.079489Jy  sigma=0.388495
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079489Jy  sigma=0.388495
! Fit after  self-cal, rms=0.079611Jy  sigma=0.387978
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.849 mas, bmaj=10.8 mas, bpa=-14.37 degrees
! Estimated noise=1.46143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110109 Jy
! Component: 100  -  total flux cleaned = 0.00118846 Jy
! Component: 150  -  total flux cleaned = 0.00118858 Jy
! Component: 200  -  total flux cleaned = 0.00121791 Jy
! Total flux subtracted in 200 components = 0.00121791 Jy
! Clean residual min=-0.002200 max=0.002225 Jy/beam
! Clean residual mean=-0.000008 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.361873 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 62 components and 0.361873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079544Jy  sigma=0.387575
! Fit after  self-cal, rms=0.079546Jy  sigma=0.387571
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.46182e-05 Jy
! Component: 100  -  total flux cleaned = 8.91664e-05 Jy
! Component: 150  -  total flux cleaned = 0.000136045 Jy
! Component: 200  -  total flux cleaned = 0.000180398 Jy
! Total flux subtracted in 200 components = 0.000180398 Jy
! Clean residual min=-0.002174 max=0.002163 Jy/beam
! Clean residual mean=-0.000008 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.362053 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 64 components and 0.362053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079524Jy  sigma=0.387469
! Fit after  self-cal, rms=0.079521Jy  sigma=0.387468
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079521Jy  sigma=0.387468
! Fit after  self-cal, rms=0.079557Jy  sigma=0.387322
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.128 mas, bmaj=13.53 mas, bpa=0.2286 degrees
! Estimated noise=1.63008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000989846 Jy
! Component: 100  -  total flux cleaned = 0.00116546 Jy
! Component: 150  -  total flux cleaned = 0.00122063 Jy
! Component: 200  -  total flux cleaned = 0.00126553 Jy
! Total flux subtracted in 200 components = 0.00126553 Jy
! Clean residual min=-0.001929 max=0.002230 Jy/beam
! Clean residual mean=-0.000015 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.363319 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 69 components and 0.363319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079514Jy  sigma=0.387168
! Fit after  self-cal, rms=0.079515Jy  sigma=0.387157
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.08366e-06 Jy
! Component: 100  -  total flux cleaned = 1.14913e-05 Jy
! Component: 150  -  total flux cleaned = 3.77919e-05 Jy
! Component: 200  -  total flux cleaned = 4.96642e-05 Jy
! Total flux subtracted in 200 components = 4.96642e-05 Jy
! Clean residual min=-0.001960 max=0.002197 Jy/beam
! Clean residual mean=-0.000015 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.363368 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 74 components and 0.363368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079507Jy  sigma=0.387181
! Fit after  self-cal, rms=0.079505Jy  sigma=0.387170
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.849 mas, bmaj=10.79 mas, bpa=-14.36 degrees
! Estimated noise=1.46184 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.849 x 10.79 at -14.36 degrees (North through East)
! Clean map  min=-0.0020306  max=0.36533 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.115 mas, bmaj=10.06 mas, bpa=-15.01 degrees
! Estimated noise=2.18788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.286358 Jy
! Component: 100  -  total flux cleaned = 0.348803 Jy
! Component: 150  -  total flux cleaned = 0.362503 Jy
! Component: 200  -  total flux cleaned = 0.365162 Jy
! Total flux subtracted in 200 components = 0.365162 Jy
! Clean residual min=-0.003735 max=0.003586 Jy/beam
! Clean residual mean=-0.000003 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.365162 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.365162 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.849 mas, bmaj=10.79 mas, bpa=-14.36 degrees
! Estimated noise=1.46184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000191792 Jy
! Component: 100  -  total flux cleaned = -0.000349536 Jy
! Component: 150  -  total flux cleaned = -0.000442153 Jy
! Component: 200  -  total flux cleaned = -0.000483611 Jy
! Total flux subtracted in 200 components = -0.000483611 Jy
! Clean residual min=-0.002337 max=0.002305 Jy/beam
! Clean residual mean=-0.000007 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.364679 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.364679 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.128 mas, bmaj=13.53 mas, bpa=0.2286 degrees
! Estimated noise=1.63008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.73001e-05 Jy
! Component: 100  -  total flux cleaned = -0.000159369 Jy
! Component: 150  -  total flux cleaned = -0.000210848 Jy
! Component: 200  -  total flux cleaned = -0.000242852 Jy
! Total flux subtracted in 200 components = -0.000242852 Jy
! Clean residual min=-0.002116 max=0.002105 Jy/beam
! Clean residual mean=-0.000013 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.364436 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.91114e-05 Jy
! Component: 100  -  total flux cleaned = -4.34029e-05 Jy
! Component: 150  -  total flux cleaned = -6.87651e-05 Jy
! Component: 200  -  total flux cleaned = -8.07569e-05 Jy
! Total flux subtracted in 200 components = -8.07569e-05 Jy
! Clean residual min=-0.002099 max=0.002121 Jy/beam
! Clean residual mean=-0.000013 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.364355 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.364355 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.849 mas, bmaj=10.79 mas, bpa=-14.36 degrees
! Estimated noise=1.46184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164224 Jy
! Component: 100  -  total flux cleaned = -0.000170351 Jy
! Component: 150  -  total flux cleaned = -0.000100454 Jy
! Component: 200  -  total flux cleaned = -6.85811e-05 Jy
! Total flux subtracted in 200 components = -6.85811e-05 Jy
! Clean residual min=-0.002212 max=0.002237 Jy/beam
! Clean residual mean=-0.000007 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.364286 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.364286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079541Jy  sigma=0.387200
! Fit after  self-cal, rms=0.079544Jy  sigma=0.387181
wmodel J1228+0232_S_map.mod
! Writing 35 model components to file: J1228+0232_S_map.mod
wobs   J1228+0232_S_uvs.fits
! Writing UV FITS file: J1228+0232_S_uvs.fits
wwins  J1228+0232_S_map.win
! wwins: Wrote 1 windows to J1228+0232_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330809 Jy
! Component: 100  -  total flux cleaned = 0.000222818 Jy
! Component: 150  -  total flux cleaned = 4.69903e-05 Jy
! Component: 200  -  total flux cleaned = -0.00018811 Jy
! Component: 250  -  total flux cleaned = -0.000349415 Jy
! Component: 300  -  total flux cleaned = -0.000566871 Jy
! Component: 350  -  total flux cleaned = -0.000656484 Jy
! Component: 400  -  total flux cleaned = -0.00074425 Jy
! Component: 450  -  total flux cleaned = -0.000885851 Jy
! Component: 500  -  total flux cleaned = -0.000994631 Jy
! Component: 550  -  total flux cleaned = -0.00107451 Jy
! Component: 600  -  total flux cleaned = -0.00117882 Jy
! Component: 650  -  total flux cleaned = -0.00125545 Jy
! Component: 700  -  total flux cleaned = -0.00135501 Jy
! Component: 750  -  total flux cleaned = -0.00145232 Jy
! Component: 800  -  total flux cleaned = -0.00147631 Jy
! Component: 850  -  total flux cleaned = -0.00161724 Jy
! Component: 900  -  total flux cleaned = -0.00170901 Jy
! Component: 950  -  total flux cleaned = -0.0017089 Jy
! Component: 1000  -  total flux cleaned = -0.00181969 Jy
! Component: 1050  -  total flux cleaned = -0.00188472 Jy
! Component: 1100  -  total flux cleaned = -0.00196997 Jy
! Component: 1150  -  total flux cleaned = -0.00201193 Jy
! Component: 1200  -  total flux cleaned = -0.00205319 Jy
! Component: 1250  -  total flux cleaned = -0.00205298 Jy
! Component: 1300  -  total flux cleaned = -0.00209274 Jy
! Component: 1350  -  total flux cleaned = -0.00205322 Jy
! Component: 1400  -  total flux cleaned = -0.00211162 Jy
! Component: 1450  -  total flux cleaned = -0.00213079 Jy
! Component: 1500  -  total flux cleaned = -0.00214959 Jy
! Component: 1550  -  total flux cleaned = -0.00220541 Jy
! Component: 1600  -  total flux cleaned = -0.00222357 Jy
! Component: 1650  -  total flux cleaned = -0.00224148 Jy
! Component: 1700  -  total flux cleaned = -0.00224157 Jy
! Component: 1750  -  total flux cleaned = -0.00231216 Jy
! Component: 1800  -  total flux cleaned = -0.0023118 Jy
! Component: 1850  -  total flux cleaned = -0.00234636 Jy
! Component: 1900  -  total flux cleaned = -0.00238038 Jy
! Component: 1950  -  total flux cleaned = -0.00238027 Jy
! Component: 2000  -  total flux cleaned = -0.00239706 Jy
! Component: 2050  -  total flux cleaned = -0.00246334 Jy
! Component: 2100  -  total flux cleaned = -0.00247993 Jy
! Component: 2150  -  total flux cleaned = -0.00251239 Jy
! Component: 2200  -  total flux cleaned = -0.0025286 Jy
! Component: 2250  -  total flux cleaned = -0.00256031 Jy
! Component: 2300  -  total flux cleaned = -0.00254485 Jy
! Component: 2350  -  total flux cleaned = -0.00259138 Jy
! Component: 2400  -  total flux cleaned = -0.00265266 Jy
! Component: 2450  -  total flux cleaned = -0.00260687 Jy
! Component: 2500  -  total flux cleaned = -0.00259174 Jy
! Component: 2550  -  total flux cleaned = -0.00260673 Jy
! Component: 2600  -  total flux cleaned = -0.00260655 Jy
! Component: 2650  -  total flux cleaned = -0.00266493 Jy
! Component: 2700  -  total flux cleaned = -0.00266483 Jy
! Component: 2750  -  total flux cleaned = -0.00272211 Jy
! Component: 2800  -  total flux cleaned = -0.00276471 Jy
! Component: 2850  -  total flux cleaned = -0.002807 Jy
! Component: 2900  -  total flux cleaned = -0.00283501 Jy
! Component: 2950  -  total flux cleaned = -0.00284906 Jy
! Component: 3000  -  total flux cleaned = -0.00290416 Jy
! Component: 3050  -  total flux cleaned = -0.00290415 Jy
! Component: 3100  -  total flux cleaned = -0.00291793 Jy
! Component: 3150  -  total flux cleaned = -0.00297179 Jy
! Component: 3200  -  total flux cleaned = -0.00299862 Jy
! Component: 3250  -  total flux cleaned = -0.00299869 Jy
! Component: 3300  -  total flux cleaned = -0.00303814 Jy
! Component: 3350  -  total flux cleaned = -0.0031165 Jy
! Component: 3400  -  total flux cleaned = -0.00311632 Jy
! Component: 3450  -  total flux cleaned = -0.0031034 Jy
! Component: 3500  -  total flux cleaned = -0.00312905 Jy
! Component: 3550  -  total flux cleaned = -0.00312902 Jy
! Component: 3600  -  total flux cleaned = -0.00316712 Jy
! Component: 3650  -  total flux cleaned = -0.0031546 Jy
! Component: 3700  -  total flux cleaned = -0.00316713 Jy
! Component: 3750  -  total flux cleaned = -0.00321667 Jy
! Component: 3800  -  total flux cleaned = -0.00320423 Jy
! Component: 3850  -  total flux cleaned = -0.00322865 Jy
! Component: 3900  -  total flux cleaned = -0.00320422 Jy
! Component: 3950  -  total flux cleaned = -0.0032163 Jy
! Component: 4000  -  total flux cleaned = -0.00320421 Jy
! Component: 4050  -  total flux cleaned = -0.00319233 Jy
! Total flux subtracted in 4096 components = -0.00320422 Jy
! Clean residual min=-0.000687 max=0.000729 Jy/beam
! Clean residual mean=-0.000002 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.361082 Jy
keep
! Adding 265 model components to the UV plane model.
! The established model now contains 300 components and 0.361082 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1228+0232_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.849 x 10.79 at -14.36 degrees (North through East)
! Clean map  min=-0.0018397  max=0.36511 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1228+0232_S_map.fits
wmodel /image_prod/ug002_uva//J1228+0232_S_map.mod
! Writing 300 model components to file: /image_prod/ug002_uva//J1228+0232_S_map.mod
wobs   /image_prod/ug002_uva//J1228+0232_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1228+0232_S_uvs.fits
wwins  /image_prod/ug002_uva//J1228+0232_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1228+0232_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.365107 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000210401 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.172882 0.172882 0.345764 0.691528 1.38306 2.76611 5.53223 11.0645 22.1289 44.2578 88.5156
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.365 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1735.29 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1228+0232_S_dfm.log closed on Thu Mar  5 00:40:08 2020