! Started logfile: /image_prod/ug002_uva//J1227+3635_X_dfm.log on Thu Mar 5 00:39:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1227+3635_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1227+3635_X_uva.fits ! AN table 1: 40 integrations on 28 of 28 possible baselines. ! AN table 2: 20 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.985714 visibilities/baseline/integration-bin. ! Found source: J1227+3635 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 19872 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1227+3635_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011059Jy sigma=9.246008 ! Fit after self-cal, rms=0.930090Jy sigma=8.461699 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6952 mas, bmaj=1.218 mas, bpa=-5.333 degrees ! Estimated noise=1.17698 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467621 Jy ! Component: 100 - total flux cleaned = 0.069019 Jy ! Total flux subtracted in 100 components = 0.069019 Jy ! Clean residual min=-0.008561 max=0.018944 Jy/beam ! Clean residual mean=-0.000014 rms=0.002330 Jy/beam ! Combined flux in latest and established models = 0.069019 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.069019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084291Jy sigma=0.718410 ! Fit after self-cal, rms=0.083166Jy sigma=0.708374 ! Inverting map ! Added new window around map position (-1, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210321 Jy ! Component: 100 - total flux cleaned = 0.0355553 Jy ! Total flux subtracted in 100 components = 0.0355553 Jy ! Clean residual min=-0.006662 max=0.008292 Jy/beam ! Clean residual mean=-0.000010 rms=0.001844 Jy/beam ! Combined flux in latest and established models = 0.104574 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.104574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073640Jy sigma=0.614916 ! Fit after self-cal, rms=0.073060Jy sigma=0.609117 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135019 Jy ! Component: 100 - total flux cleaned = 0.0234908 Jy ! Total flux subtracted in 100 components = 0.0234908 Jy ! Clean residual min=-0.006110 max=0.008361 Jy/beam ! Clean residual mean=-0.000008 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.128065 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 53 components and 0.128065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068257Jy sigma=0.562766 ! Fit after self-cal, rms=0.068132Jy sigma=0.561236 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8914 mas, bmaj=1.481 mas, bpa=-1.71 degrees ! Estimated noise=0.562375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150474 Jy ! Component: 100 - total flux cleaned = 0.0258662 Jy ! Component: 150 - total flux cleaned = 0.0340677 Jy ! Component: 200 - total flux cleaned = 0.0404294 Jy ! Total flux subtracted in 200 components = 0.0404294 Jy ! Clean residual min=-0.008391 max=0.011033 Jy/beam ! Clean residual mean=-0.000010 rms=0.001892 Jy/beam ! Combined flux in latest and established models = 0.168494 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 70 components and 0.168494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063295Jy sigma=0.517092 ! Fit after self-cal, rms=0.063212Jy sigma=0.515636 ! Inverting map ! Added new window around map position (-1.4, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101365 Jy ! Component: 100 - total flux cleaned = 0.0159156 Jy ! Component: 150 - total flux cleaned = 0.0202939 Jy ! Component: 200 - total flux cleaned = 0.0238466 Jy ! Total flux subtracted in 200 components = 0.0238466 Jy ! Clean residual min=-0.006984 max=0.008014 Jy/beam ! Clean residual mean=-0.000005 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.192341 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 95 components and 0.192341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061173Jy sigma=0.498009 ! Fit after self-cal, rms=0.061083Jy sigma=0.495839 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8914 x 1.481 at -1.71 degrees (North through East) ! Clean map min=-0.006797 max=0.065502 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 KP 1.01 MK 1.10 ! NL 1.03 OV 0.94 PT 0.81 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.93 HN 1.07 KP 0.98 ! MK 1.08 NL 1.19 OV 0.94 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 KP 0.97 MK 1.15 ! NL 1.13 OV 0.90 PT 0.84 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 HN 1.00 KP 0.93 ! MK 1.00 NL 1.37 OV 0.88 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 KP 0.97 MK 1.17 ! NL 1.07 OV 0.92 PT 0.83 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.95 HN 0.89 KP 1.00 ! MK 1.19 NL 1.26 OV 0.88 SC 1.21 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 KP 0.98 MK 1.13 ! NL 1.06 OV 0.96 PT 0.84 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.04 HN 1.03 KP 0.95 ! MK 1.13 NL 1.23 OV 0.94 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 KP 1.01 MK 1.12 ! NL 1.11 OV 0.91 PT 0.88 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 HN 0.99 KP 0.97 ! MK 1.02 NL 1.24 OV 0.96 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 KP 0.97 MK 1.05 ! NL 1.09 OV 0.93 PT 0.86 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 1.00 HN 1.13 KP 0.98 ! MK 1.00 NL 1.23 OV 1.00 SC 1.11 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 0.99 MK 1.01 ! NL 1.10 OV 0.95 PT 0.87 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 1.04 KP 0.96 ! MK 1.03 NL 1.19 OV 0.98 SC 1.15 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 KP 0.97 MK 0.95 ! NL 1.12 OV 0.97 PT 0.88 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.07 HN 1.01 KP 0.96 ! MK 0.91 NL 1.12 OV 1.05 SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 KP 0.98 MK 1.07 ! NL 1.15 OV 0.95 PT 0.86 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 1.04 HN 1.05 KP 0.96 ! MK 0.91 NL 1.27 OV 1.04 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 KP 1.02 MK 1.01 ! NL 1.09 OV 0.95 PT 0.89 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.82 FD 1.06 HN 1.02 KP 1.03 ! MK 0.97 NL 1.14 OV 0.99 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 KP 1.01 MK 1.02 ! NL 1.22 OV 0.94 PT 0.87 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.18 HN 1.18 KP 0.98 ! MK 1.00 NL 1.12 OV 1.03 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 KP 0.98 MK 0.97 ! NL 1.20 OV 0.93 PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.15 HN 1.23 KP 1.01 ! MK 0.85 NL 1.11 OV 0.98 SC 1.01 ! ! ! Fit before self-cal, rms=0.061083Jy sigma=0.495839 ! Fit after self-cal, rms=0.059708Jy sigma=0.484845 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8995 mas, bmaj=1.49 mas, bpa=-0.5649 degrees ! Estimated noise=0.568167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797402 Jy ! Component: 100 - total flux cleaned = 0.0121289 Jy ! Component: 150 - total flux cleaned = 0.0138941 Jy ! Component: 200 - total flux cleaned = 0.0145107 Jy ! Total flux subtracted in 200 components = 0.0145107 Jy ! Clean residual min=-0.005288 max=0.007458 Jy/beam ! Clean residual mean=0.000003 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.206852 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.206852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058452Jy sigma=0.474496 ! Fit after self-cal, rms=0.058379Jy sigma=0.473230 ! Inverting map ! Added new window around map position (-32.2, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647554 Jy ! Component: 100 - total flux cleaned = 0.0102479 Jy ! Component: 150 - total flux cleaned = 0.012855 Jy ! Component: 200 - total flux cleaned = 0.0147261 Jy ! Total flux subtracted in 200 components = 0.0147261 Jy ! Clean residual min=-0.004489 max=0.005372 Jy/beam ! Clean residual mean=0.000002 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.221578 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 135 components and 0.221578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057494Jy sigma=0.465132 ! Fit after self-cal, rms=0.057411Jy sigma=0.464310 ! Inverting map ! Added new window around map position (-24.4, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453986 Jy ! Component: 100 - total flux cleaned = 0.00705088 Jy ! Component: 150 - total flux cleaned = 0.00911405 Jy ! Component: 200 - total flux cleaned = 0.0106285 Jy ! Total flux subtracted in 200 components = 0.0106285 Jy ! Clean residual min=-0.003879 max=0.004107 Jy/beam ! Clean residual mean=0.000002 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.232206 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 159 components and 0.232206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056904Jy sigma=0.459866 ! Fit after self-cal, rms=0.056848Jy sigma=0.459423 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056848Jy sigma=0.459423 ! Fit after self-cal, rms=0.056444Jy sigma=0.449987 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8977 mas, bmaj=1.493 mas, bpa=-1.436 degrees ! Estimated noise=0.567485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141674 Jy ! Component: 100 - total flux cleaned = 0.00206207 Jy ! Component: 150 - total flux cleaned = 0.00269535 Jy ! Component: 200 - total flux cleaned = 0.00291716 Jy ! Total flux subtracted in 200 components = 0.00291716 Jy ! Clean residual min=-0.002121 max=0.002659 Jy/beam ! Clean residual mean=-0.000002 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.235124 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 174 components and 0.235124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056288Jy sigma=0.448554 ! Fit after self-cal, rms=0.056280Jy sigma=0.448341 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258981 Jy ! Component: 100 - total flux cleaned = 0.00396672 Jy ! Component: 150 - total flux cleaned = 0.00466258 Jy ! Component: 200 - total flux cleaned = 0.00519641 Jy ! Total flux subtracted in 200 components = 0.00519641 Jy ! Clean residual min=-0.001824 max=0.001937 Jy/beam ! Clean residual mean=-0.000001 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.24032 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 202 components and 0.24032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056136Jy sigma=0.446785 ! Fit after self-cal, rms=0.056125Jy sigma=0.446690 ! Inverting map ! Added new window around map position (-30.4, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015516 Jy ! Component: 100 - total flux cleaned = 0.00213726 Jy ! Component: 150 - total flux cleaned = 0.00262457 Jy ! Component: 200 - total flux cleaned = 0.00299619 Jy ! Total flux subtracted in 200 components = 0.00299619 Jy ! Clean residual min=-0.001618 max=0.001562 Jy/beam ! Clean residual mean=-0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.243316 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 218 components and 0.243316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056037Jy sigma=0.445868 ! Fit after self-cal, rms=0.056026Jy sigma=0.445751 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056026Jy sigma=0.445751 ! Fit after self-cal, rms=0.056500Jy sigma=0.445576 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8998 mas, bmaj=1.499 mas, bpa=-1.081 degrees ! Estimated noise=0.568929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275881 Jy ! Component: 100 - total flux cleaned = 0.000680056 Jy ! Component: 150 - total flux cleaned = 0.00112794 Jy ! Component: 200 - total flux cleaned = 0.00161858 Jy ! Total flux subtracted in 200 components = 0.00161858 Jy ! Clean residual min=-0.001474 max=0.001409 Jy/beam ! Clean residual mean=-0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.244935 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 229 components and 0.244935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056438Jy sigma=0.444987 ! Fit after self-cal, rms=0.056437Jy sigma=0.444953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510017 Jy ! Component: 100 - total flux cleaned = 0.000907055 Jy ! Component: 150 - total flux cleaned = 0.00124516 Jy ! Component: 200 - total flux cleaned = 0.00153165 Jy ! Total flux subtracted in 200 components = 0.00153165 Jy ! Clean residual min=-0.001437 max=0.001344 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.246466 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 237 components and 0.246466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056398Jy sigma=0.444598 ! Fit after self-cal, rms=0.056396Jy sigma=0.444579 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056396Jy sigma=0.444579 ! Fit after self-cal, rms=0.056530Jy sigma=0.444521 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=2.414 mas, bpa=9.659 degrees ! Estimated noise=0.702994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147978 Jy ! Component: 100 - total flux cleaned = 0.00213488 Jy ! Component: 150 - total flux cleaned = 0.0027641 Jy ! Component: 200 - total flux cleaned = 0.00328419 Jy ! Total flux subtracted in 200 components = 0.00328419 Jy ! Clean residual min=-0.001662 max=0.001654 Jy/beam ! Clean residual mean=-0.000001 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.249751 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 269 components and 0.249751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056510Jy sigma=0.444257 ! Fit after self-cal, rms=0.056509Jy sigma=0.444215 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512493 Jy ! Component: 100 - total flux cleaned = 0.000995432 Jy ! Component: 150 - total flux cleaned = 0.00140284 Jy ! Component: 200 - total flux cleaned = 0.00165308 Jy ! Total flux subtracted in 200 components = 0.00165308 Jy ! Clean residual min=-0.001585 max=0.001631 Jy/beam ! Clean residual mean=-0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.251404 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 280 components and 0.251404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056495Jy sigma=0.444080 ! Fit after self-cal, rms=0.056493Jy sigma=0.444062 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9013 mas, bmaj=1.5 mas, bpa=-0.8263 degrees ! Estimated noise=0.56908 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9013 x 1.5 at -0.8263 degrees (North through East) ! Clean map min=-0.0012459 max=0.065493 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6988 mas, bmaj=1.235 mas, bpa=-4.373 degrees ! Estimated noise=1.19986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484876 Jy ! Component: 100 - total flux cleaned = 0.0775358 Jy ! Component: 150 - total flux cleaned = 0.0980536 Jy ! Component: 200 - total flux cleaned = 0.113136 Jy ! Total flux subtracted in 200 components = 0.113136 Jy ! Clean residual min=-0.006110 max=0.008749 Jy/beam ! Clean residual mean=-0.000009 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.113136 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.113136 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9013 mas, bmaj=1.5 mas, bpa=-0.8263 degrees ! Estimated noise=0.56908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191008 Jy ! Component: 100 - total flux cleaned = 0.0325074 Jy ! Component: 150 - total flux cleaned = 0.0432727 Jy ! Component: 200 - total flux cleaned = 0.0525726 Jy ! Total flux subtracted in 200 components = 0.0525726 Jy ! Clean residual min=-0.005182 max=0.006531 Jy/beam ! Clean residual mean=-0.000011 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.165708 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 67 components and 0.165708 Jy ! Inverting map ! Added new window around map position (-3.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00820919 Jy ! Component: 100 - total flux cleaned = 0.015374 Jy ! Component: 150 - total flux cleaned = 0.0217304 Jy ! Component: 200 - total flux cleaned = 0.0273928 Jy ! Total flux subtracted in 200 components = 0.0273928 Jy ! Clean residual min=-0.003687 max=0.003803 Jy/beam ! Clean residual mean=-0.000007 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.193101 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 94 components and 0.193101 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=2.414 mas, bpa=9.659 degrees ! Estimated noise=0.702994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00938366 Jy ! Component: 100 - total flux cleaned = 0.0163625 Jy ! Component: 150 - total flux cleaned = 0.0219689 Jy ! Component: 200 - total flux cleaned = 0.0266695 Jy ! Total flux subtracted in 200 components = 0.0266695 Jy ! Clean residual min=-0.003764 max=0.003633 Jy/beam ! Clean residual mean=-0.000009 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.219771 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401681 Jy ! Component: 100 - total flux cleaned = 0.00750394 Jy ! Component: 150 - total flux cleaned = 0.010555 Jy ! Component: 200 - total flux cleaned = 0.0132413 Jy ! Total flux subtracted in 200 components = 0.0132413 Jy ! Clean residual min=-0.002723 max=0.002383 Jy/beam ! Clean residual mean=-0.000006 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.233012 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 172 components and 0.233012 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9013 mas, bmaj=1.5 mas, bpa=-0.8263 degrees ! Estimated noise=0.56908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016436 Jy ! Component: 100 - total flux cleaned = 0.00328693 Jy ! Component: 150 - total flux cleaned = 0.00446027 Jy ! Component: 200 - total flux cleaned = 0.00560072 Jy ! Total flux subtracted in 200 components = 0.00560072 Jy ! Clean residual min=-0.001675 max=0.001969 Jy/beam ! Clean residual mean=-0.000002 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.238613 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 195 components and 0.238613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056765Jy sigma=0.446890 ! Fit after self-cal, rms=0.056698Jy sigma=0.446378 wmodel J1227+3635_X_map.mod ! Writing 195 model components to file: J1227+3635_X_map.mod wobs J1227+3635_X_uvs.fits ! Writing UV FITS file: J1227+3635_X_uvs.fits wwins J1227+3635_X_map.win ! wwins: Wrote 9 windows to J1227+3635_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737473 Jy ! Component: 100 - total flux cleaned = 0.000706622 Jy ! Component: 150 - total flux cleaned = 0.000678286 Jy ! Component: 200 - total flux cleaned = 0.000705594 Jy ! Component: 250 - total flux cleaned = 0.000653703 Jy ! Component: 300 - total flux cleaned = 0.000653996 Jy ! Component: 350 - total flux cleaned = 0.000702852 Jy ! Component: 400 - total flux cleaned = 0.000821985 Jy ! Component: 450 - total flux cleaned = 0.000937938 Jy ! Component: 500 - total flux cleaned = 0.000983264 Jy ! Component: 550 - total flux cleaned = 0.00102798 Jy ! Component: 600 - total flux cleaned = 0.00109261 Jy ! Component: 650 - total flux cleaned = 0.00111398 Jy ! Component: 700 - total flux cleaned = 0.00121729 Jy ! Component: 750 - total flux cleaned = 0.00125773 Jy ! Component: 800 - total flux cleaned = 0.00133742 Jy ! Component: 850 - total flux cleaned = 0.00149317 Jy ! Component: 900 - total flux cleaned = 0.00153152 Jy ! Component: 950 - total flux cleaned = 0.00158789 Jy ! Component: 1000 - total flux cleaned = 0.00167998 Jy ! Component: 1050 - total flux cleaned = 0.00167984 Jy ! Component: 1100 - total flux cleaned = 0.00173338 Jy ! Component: 1150 - total flux cleaned = 0.00178603 Jy ! Component: 1200 - total flux cleaned = 0.00180339 Jy ! Component: 1250 - total flux cleaned = 0.00185432 Jy ! Component: 1300 - total flux cleaned = 0.00187096 Jy ! Component: 1350 - total flux cleaned = 0.00200269 Jy ! Component: 1400 - total flux cleaned = 0.00198644 Jy ! Component: 1450 - total flux cleaned = 0.00203482 Jy ! Component: 1500 - total flux cleaned = 0.00216126 Jy ! Component: 1550 - total flux cleaned = 0.00222346 Jy ! Component: 1600 - total flux cleaned = 0.00223885 Jy ! Component: 1650 - total flux cleaned = 0.00235988 Jy ! Component: 1700 - total flux cleaned = 0.00241931 Jy ! Component: 1750 - total flux cleaned = 0.00241919 Jy ! Component: 1800 - total flux cleaned = 0.00249187 Jy ! Component: 1850 - total flux cleaned = 0.00252051 Jy ! Component: 1900 - total flux cleaned = 0.0026197 Jy ! Component: 1950 - total flux cleaned = 0.00264784 Jy ! Component: 2000 - total flux cleaned = 0.00271663 Jy ! Component: 2050 - total flux cleaned = 0.00275771 Jy ! Component: 2100 - total flux cleaned = 0.00283849 Jy ! Component: 2150 - total flux cleaned = 0.00294497 Jy ! Component: 2200 - total flux cleaned = 0.00302347 Jy ! Component: 2250 - total flux cleaned = 0.00306236 Jy ! Component: 2300 - total flux cleaned = 0.0031009 Jy ! Component: 2350 - total flux cleaned = 0.00318962 Jy ! Component: 2400 - total flux cleaned = 0.00327765 Jy ! Component: 2450 - total flux cleaned = 0.00332745 Jy ! Component: 2500 - total flux cleaned = 0.00336439 Jy ! Component: 2550 - total flux cleaned = 0.00343754 Jy ! Component: 2600 - total flux cleaned = 0.00352193 Jy ! Component: 2650 - total flux cleaned = 0.00359356 Jy ! Component: 2700 - total flux cleaned = 0.00365259 Jy ! Component: 2750 - total flux cleaned = 0.003723 Jy ! Component: 2800 - total flux cleaned = 0.00376926 Jy ! Component: 2850 - total flux cleaned = 0.00381501 Jy ! Component: 2900 - total flux cleaned = 0.00384922 Jy ! Component: 2950 - total flux cleaned = 0.00391703 Jy ! Component: 3000 - total flux cleaned = 0.00389462 Jy ! Component: 3050 - total flux cleaned = 0.00399452 Jy ! Component: 3100 - total flux cleaned = 0.00407156 Jy ! Component: 3150 - total flux cleaned = 0.00410423 Jy ! Component: 3200 - total flux cleaned = 0.00416903 Jy ! Component: 3250 - total flux cleaned = 0.00425494 Jy ! Component: 3300 - total flux cleaned = 0.00422298 Jy ! Component: 3350 - total flux cleaned = 0.00426521 Jy ! Component: 3400 - total flux cleaned = 0.00431763 Jy ! Component: 3450 - total flux cleaned = 0.00429673 Jy ! Component: 3500 - total flux cleaned = 0.00429693 Jy ! Component: 3550 - total flux cleaned = 0.00440966 Jy ! Component: 3600 - total flux cleaned = 0.00442985 Jy ! Component: 3650 - total flux cleaned = 0.00444992 Jy ! Component: 3700 - total flux cleaned = 0.00447982 Jy ! Component: 3750 - total flux cleaned = 0.00446981 Jy ! Component: 3800 - total flux cleaned = 0.00445998 Jy ! Component: 3850 - total flux cleaned = 0.00449925 Jy ! Component: 3900 - total flux cleaned = 0.00455773 Jy ! Component: 3950 - total flux cleaned = 0.00453844 Jy ! Component: 4000 - total flux cleaned = 0.00457683 Jy ! Component: 4050 - total flux cleaned = 0.00458633 Jy ! Total flux subtracted in 4096 components = 0.00457677 Jy ! Clean residual min=-0.000662 max=0.000565 Jy/beam ! Clean residual mean=-0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.24319 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 527 components and 0.243189 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1227+3635_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9013 x 1.5 at -0.8263 degrees (North through East) ! Clean map min=-0.0010443 max=0.067441 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1227+3635_X_map.fits wmodel /image_prod/ug002_uva//J1227+3635_X_map.mod ! Writing 527 model components to file: /image_prod/ug002_uva//J1227+3635_X_map.mod wobs /image_prod/ug002_uva//J1227+3635_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1227+3635_X_uvs.fits wwins /image_prod/ug002_uva//J1227+3635_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J1227+3635_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0674411 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161589 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.718799 0.718799 1.4376 2.8752 5.7504 11.5008 23.0016 46.0032 92.0063 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.067 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 417.362 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1227+3635_X_dfm.log closed on Thu Mar 5 00:39:44 2020