! Started logfile: /image_prod/ug002_uva//J1226-1328_S_dfm.log on Thu Mar 5 00:39:14 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1226-1328_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1226-1328_S_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972222 visibilities/baseline/integration-bin. ! Found source: J1226-1328 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5250 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1226-1328_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022054Jy sigma=7.770311 ! Fit after self-cal, rms=0.807942Jy sigma=6.077979 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.02 mas, bpa=-1.629 degrees ! Estimated noise=1.91262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154348 Jy ! Component: 100 - total flux cleaned = 0.188511 Jy ! Total flux subtracted in 100 components = 0.188511 Jy ! Clean residual min=-0.012137 max=0.011146 Jy/beam ! Clean residual mean=0.000023 rms=0.002763 Jy/beam ! Combined flux in latest and established models = 0.188511 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.188511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082866Jy sigma=0.576634 ! Fit after self-cal, rms=0.082865Jy sigma=0.576614 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=8.208 mas, bpa=-2.618 degrees ! Estimated noise=1.33709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109081 Jy ! Component: 100 - total flux cleaned = 0.0152805 Jy ! Component: 150 - total flux cleaned = 0.0174655 Jy ! Component: 200 - total flux cleaned = 0.0176953 Jy ! Total flux subtracted in 200 components = 0.0176953 Jy ! Clean residual min=-0.014545 max=0.007595 Jy/beam ! Clean residual mean=0.000053 rms=0.002422 Jy/beam ! Combined flux in latest and established models = 0.206206 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.206206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081760Jy sigma=0.566100 ! Fit after self-cal, rms=0.081772Jy sigma=0.566078 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 8.208 at -2.618 degrees (North through East) ! Clean map min=-0.014306 max=0.19631 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.07 HN 1.04 KP 1.07 ! LA 1.06 MK 1.02 NL 1.02 OV 0.65 ! PT 1.08 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.05 HN 1.04 KP 1.04 ! LA 1.05 MK 0.94 NL 0.99 OV 0.95 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.05 HN 1.07 KP 1.06 ! LA 1.07 MK 1.03 NL 0.95 OV 0.63 ! PT 1.07 SC 0.98 ! ! ! Fit before self-cal, rms=0.081772Jy sigma=0.566078 ! Fit after self-cal, rms=0.072221Jy sigma=0.478570 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=8.219 mas, bpa=-2.306 degrees ! Estimated noise=1.33439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561563 Jy ! Component: 100 - total flux cleaned = -0.000788025 Jy ! Component: 150 - total flux cleaned = -0.000867109 Jy ! Component: 200 - total flux cleaned = -0.00097437 Jy ! Total flux subtracted in 200 components = -0.00097437 Jy ! Clean residual min=-0.002912 max=0.003018 Jy/beam ! Clean residual mean=0.000005 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.205232 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.205232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072168Jy sigma=0.478209 ! Fit after self-cal, rms=0.072402Jy sigma=0.477347 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072402Jy sigma=0.477347 ! Fit after self-cal, rms=0.073840Jy sigma=0.474326 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=8.255 mas, bpa=-2.083 degrees ! Estimated noise=1.33723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.82815e-05 Jy ! Component: 100 - total flux cleaned = 0.000125218 Jy ! Component: 150 - total flux cleaned = 0.000126865 Jy ! Component: 200 - total flux cleaned = 0.000128207 Jy ! Total flux subtracted in 200 components = 0.000128207 Jy ! Clean residual min=-0.002371 max=0.002433 Jy/beam ! Clean residual mean=0.000006 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.20536 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.20536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073798Jy sigma=0.474132 ! Fit after self-cal, rms=0.073818Jy sigma=0.474105 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.11741e-05 Jy ! Component: 100 - total flux cleaned = -0.000104537 Jy ! Component: 150 - total flux cleaned = -0.000104965 Jy ! Component: 200 - total flux cleaned = -0.000145693 Jy ! Total flux subtracted in 200 components = -0.000145693 Jy ! Clean residual min=-0.002374 max=0.002407 Jy/beam ! Clean residual mean=0.000006 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.205214 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.205214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073801Jy sigma=0.474014 ! Fit after self-cal, rms=0.073797Jy sigma=0.474003 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073797Jy sigma=0.474003 ! Fit after self-cal, rms=0.074100Jy sigma=0.473969 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.266 mas, bpa=-2.092 degrees ! Estimated noise=1.33881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.33311e-05 Jy ! Component: 100 - total flux cleaned = 6.67818e-05 Jy ! Component: 150 - total flux cleaned = 8.71688e-05 Jy ! Component: 200 - total flux cleaned = 8.66552e-05 Jy ! Total flux subtracted in 200 components = 8.66552e-05 Jy ! Clean residual min=-0.002365 max=0.002383 Jy/beam ! Clean residual mean=0.000006 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.205301 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.205301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074083Jy sigma=0.473901 ! Fit after self-cal, rms=0.074084Jy sigma=0.473895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100341 Jy ! Component: 100 - total flux cleaned = -8.28489e-05 Jy ! Component: 150 - total flux cleaned = -8.27265e-05 Jy ! Component: 200 - total flux cleaned = -9.58598e-05 Jy ! Total flux subtracted in 200 components = -9.58598e-05 Jy ! Clean residual min=-0.002367 max=0.002369 Jy/beam ! Clean residual mean=0.000006 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.205205 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.205205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074076Jy sigma=0.473861 ! Fit after self-cal, rms=0.074076Jy sigma=0.473856 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074076Jy sigma=0.473856 ! Fit after self-cal, rms=0.074264Jy sigma=0.473843 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.645 mas, bmaj=15.42 mas, bpa=-0.3004 degrees ! Estimated noise=1.62325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190818 Jy ! Component: 100 - total flux cleaned = 0.000191104 Jy ! Component: 150 - total flux cleaned = 0.000180748 Jy ! Component: 200 - total flux cleaned = 0.000163254 Jy ! Total flux subtracted in 200 components = 0.000163254 Jy ! Clean residual min=-0.002425 max=0.002369 Jy/beam ! Clean residual mean=0.000011 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.205368 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.205368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074263Jy sigma=0.473858 ! Fit after self-cal, rms=0.074262Jy sigma=0.473841 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.03738e-06 Jy ! Component: 100 - total flux cleaned = -1.77095e-05 Jy ! Component: 150 - total flux cleaned = -3.37795e-05 Jy ! Component: 200 - total flux cleaned = -4.63347e-05 Jy ! Total flux subtracted in 200 components = -4.63347e-05 Jy ! Clean residual min=-0.002406 max=0.002371 Jy/beam ! Clean residual mean=0.000011 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.205322 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.205322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074263Jy sigma=0.473863 ! Fit after self-cal, rms=0.074261Jy sigma=0.473854 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=8.273 mas, bpa=-2.097 degrees ! Estimated noise=1.3397 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.317 x 8.273 at -2.097 degrees (North through East) ! Clean map min=-0.0022565 max=0.19799 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=7.084 mas, bpa=-1.139 degrees ! Estimated noise=1.91218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154257 Jy ! Component: 100 - total flux cleaned = 0.188217 Jy ! Component: 150 - total flux cleaned = 0.198264 Jy ! Component: 200 - total flux cleaned = 0.202362 Jy ! Total flux subtracted in 200 components = 0.202362 Jy ! Clean residual min=-0.004386 max=0.003707 Jy/beam ! Clean residual mean=0.000005 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.202362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.202362 Jy ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=8.273 mas, bpa=-2.097 degrees ! Estimated noise=1.3397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254136 Jy ! Component: 100 - total flux cleaned = 0.00301725 Jy ! Component: 150 - total flux cleaned = 0.00343698 Jy ! Component: 200 - total flux cleaned = 0.00352147 Jy ! Total flux subtracted in 200 components = 0.00352147 Jy ! Clean residual min=-0.002352 max=0.002261 Jy/beam ! Clean residual mean=0.000006 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.205883 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.205883 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.645 mas, bmaj=15.42 mas, bpa=-0.3004 degrees ! Estimated noise=1.62325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000486446 Jy ! Component: 100 - total flux cleaned = 0.000501525 Jy ! Component: 150 - total flux cleaned = 0.000501569 Jy ! Component: 200 - total flux cleaned = 0.000501526 Jy ! Total flux subtracted in 200 components = 0.000501526 Jy ! Clean residual min=-0.002517 max=0.002484 Jy/beam ! Clean residual mean=0.000014 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.206385 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.56328e-08 Jy ! Component: 100 - total flux cleaned = -1.2796e-05 Jy ! Component: 150 - total flux cleaned = -2.44203e-05 Jy ! Component: 200 - total flux cleaned = -3.56644e-05 Jy ! Total flux subtracted in 200 components = -3.56644e-05 Jy ! Clean residual min=-0.002510 max=0.002477 Jy/beam ! Clean residual mean=0.000013 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.206349 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 59 components and 0.206349 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=8.273 mas, bpa=-2.097 degrees ! Estimated noise=1.3397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000409316 Jy ! Component: 100 - total flux cleaned = -0.000440668 Jy ! Component: 150 - total flux cleaned = -0.000469121 Jy ! Component: 200 - total flux cleaned = -0.000470377 Jy ! Total flux subtracted in 200 components = -0.000470377 Jy ! Clean residual min=-0.002306 max=0.002204 Jy/beam ! Clean residual mean=0.000006 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.205879 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.205879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074218Jy sigma=0.473550 ! Fit after self-cal, rms=0.074204Jy sigma=0.473506 wmodel J1226-1328_S_map.mod ! Writing 66 model components to file: J1226-1328_S_map.mod wobs J1226-1328_S_uvs.fits ! Writing UV FITS file: J1226-1328_S_uvs.fits wwins J1226-1328_S_map.win ! wwins: Wrote 2 windows to J1226-1328_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262271 Jy ! Component: 100 - total flux cleaned = -0.000538229 Jy ! Component: 150 - total flux cleaned = -0.000876176 Jy ! Component: 200 - total flux cleaned = -0.00109328 Jy ! Component: 250 - total flux cleaned = -0.00109366 Jy ! Component: 300 - total flux cleaned = -0.00105934 Jy ! Component: 350 - total flux cleaned = -0.00109249 Jy ! Component: 400 - total flux cleaned = -0.00115689 Jy ! Component: 450 - total flux cleaned = -0.00125135 Jy ! Component: 500 - total flux cleaned = -0.00137536 Jy ! Component: 550 - total flux cleaned = -0.00143624 Jy ! Component: 600 - total flux cleaned = -0.00155489 Jy ! Component: 650 - total flux cleaned = -0.00164193 Jy ! Component: 700 - total flux cleaned = -0.00175586 Jy ! Component: 750 - total flux cleaned = -0.00183906 Jy ! Component: 800 - total flux cleaned = -0.00192133 Jy ! Component: 850 - total flux cleaned = -0.00211016 Jy ! Component: 900 - total flux cleaned = -0.00216274 Jy ! Component: 950 - total flux cleaned = -0.00229323 Jy ! Component: 1000 - total flux cleaned = -0.00237045 Jy ! Component: 1050 - total flux cleaned = -0.00249675 Jy ! Component: 1100 - total flux cleaned = -0.00259648 Jy ! Component: 1150 - total flux cleaned = -0.00271913 Jy ! Component: 1200 - total flux cleaned = -0.00281645 Jy ! Component: 1250 - total flux cleaned = -0.00295983 Jy ! Component: 1300 - total flux cleaned = -0.0031243 Jy ! Component: 1350 - total flux cleaned = -0.00328654 Jy ! Component: 1400 - total flux cleaned = -0.00337764 Jy ! Component: 1450 - total flux cleaned = -0.00349068 Jy ! Component: 1500 - total flux cleaned = -0.00358027 Jy ! Component: 1550 - total flux cleaned = -0.00369044 Jy ! Component: 1600 - total flux cleaned = -0.00377763 Jy ! Component: 1650 - total flux cleaned = -0.0038639 Jy ! Component: 1700 - total flux cleaned = -0.00388521 Jy ! Component: 1750 - total flux cleaned = -0.00399057 Jy ! Component: 1800 - total flux cleaned = -0.00405294 Jy ! Component: 1850 - total flux cleaned = -0.00415553 Jy ! Component: 1900 - total flux cleaned = -0.00413529 Jy ! Component: 1950 - total flux cleaned = -0.00429657 Jy ! Component: 2000 - total flux cleaned = -0.00439606 Jy ! Component: 2050 - total flux cleaned = -0.00451386 Jy ! Component: 2100 - total flux cleaned = -0.00457198 Jy ! Component: 2150 - total flux cleaned = -0.00459151 Jy ! Component: 2200 - total flux cleaned = -0.00472477 Jy ! Component: 2250 - total flux cleaned = -0.00478151 Jy ! Component: 2300 - total flux cleaned = -0.00487468 Jy ! Component: 2350 - total flux cleaned = -0.00487467 Jy ! Component: 2400 - total flux cleaned = -0.00500283 Jy ! Component: 2450 - total flux cleaned = -0.00509303 Jy ! Component: 2500 - total flux cleaned = -0.00518259 Jy ! Component: 2550 - total flux cleaned = -0.00525375 Jy ! Component: 2600 - total flux cleaned = -0.00534171 Jy ! Component: 2650 - total flux cleaned = -0.00539415 Jy ! Component: 2700 - total flux cleaned = -0.00549788 Jy ! Component: 2750 - total flux cleaned = -0.00561748 Jy ! Component: 2800 - total flux cleaned = -0.00568511 Jy ! Component: 2850 - total flux cleaned = -0.00576899 Jy ! Component: 2900 - total flux cleaned = -0.0058355 Jy ! Component: 2950 - total flux cleaned = -0.00595068 Jy ! Component: 3000 - total flux cleaned = -0.00599951 Jy ! Component: 3050 - total flux cleaned = -0.00604806 Jy ! Component: 3100 - total flux cleaned = -0.00608013 Jy ! Component: 3150 - total flux cleaned = -0.00612769 Jy ! Component: 3200 - total flux cleaned = -0.00617495 Jy ! Component: 3250 - total flux cleaned = -0.00622182 Jy ! Component: 3300 - total flux cleaned = -0.00628399 Jy ! Component: 3350 - total flux cleaned = -0.00631486 Jy ! Component: 3400 - total flux cleaned = -0.00636086 Jy ! Component: 3450 - total flux cleaned = -0.00642164 Jy ! Component: 3500 - total flux cleaned = -0.00643676 Jy ! Component: 3550 - total flux cleaned = -0.00646668 Jy ! Component: 3600 - total flux cleaned = -0.00648147 Jy ! Component: 3650 - total flux cleaned = -0.00652556 Jy ! Component: 3700 - total flux cleaned = -0.00658419 Jy ! Component: 3750 - total flux cleaned = -0.00659883 Jy ! Component: 3800 - total flux cleaned = -0.00668535 Jy ! Component: 3850 - total flux cleaned = -0.00672822 Jy ! Component: 3900 - total flux cleaned = -0.00674234 Jy ! Component: 3950 - total flux cleaned = -0.00682696 Jy ! Component: 4000 - total flux cleaned = -0.00679887 Jy ! Component: 4050 - total flux cleaned = -0.00679893 Jy ! Total flux subtracted in 4096 components = -0.00682678 Jy ! Clean residual min=-0.000884 max=0.000931 Jy/beam ! Clean residual mean=0.000002 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.199052 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 318 components and 0.199052 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1226-1328_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.317 x 8.273 at -2.097 degrees (North through East) ! Clean map min=-0.0017568 max=0.19767 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1226-1328_S_map.fits wmodel /image_prod/ug002_uva//J1226-1328_S_map.mod ! Writing 318 model components to file: /image_prod/ug002_uva//J1226-1328_S_map.mod wobs /image_prod/ug002_uva//J1226-1328_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1226-1328_S_uvs.fits wwins /image_prod/ug002_uva//J1226-1328_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1226-1328_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.197672 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000242662 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.36828 0.36828 0.73656 1.47312 2.94624 5.89248 11.785 23.5699 47.1398 94.2797 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.197 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 814.597 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1226-1328_S_dfm.log closed on Thu Mar 5 00:39:17 2020