! Started logfile: /image_prod/ug002_uva//J1220+7105_X_dfm.log on Thu Mar 5 00:36:15 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1220+7105_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1220+7105_X_uva.fits ! AN table 1: 100 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.929778 visibilities/baseline/integration-bin. ! Found source: J1220+7105 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 50208 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1220+7105_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017657Jy sigma=8.708632 ! Fit after self-cal, rms=0.817601Jy sigma=6.965807 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7939 mas, bmaj=0.8621 mas, bpa=-35.65 degrees ! Estimated noise=0.951391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138417 Jy ! Component: 100 - total flux cleaned = 0.169363 Jy ! Total flux subtracted in 100 components = 0.169363 Jy ! Clean residual min=-0.005111 max=0.010765 Jy/beam ! Clean residual mean=0.000009 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.169363 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.169363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066639Jy sigma=0.539097 ! Fit after self-cal, rms=0.066635Jy sigma=0.539058 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113778 Jy ! Component: 100 - total flux cleaned = 0.0176366 Jy ! Total flux subtracted in 100 components = 0.0176366 Jy ! Clean residual min=-0.004401 max=0.006640 Jy/beam ! Clean residual mean=0.000006 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.186999 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.186999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063681Jy sigma=0.509738 ! Fit after self-cal, rms=0.063689Jy sigma=0.509712 ! Inverting map ! Added new window around map position (1.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621084 Jy ! Component: 100 - total flux cleaned = 0.0098617 Jy ! Total flux subtracted in 100 components = 0.0098617 Jy ! Clean residual min=-0.004929 max=0.005812 Jy/beam ! Clean residual mean=0.000004 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.196861 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.196861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062806Jy sigma=0.501423 ! Fit after self-cal, rms=0.062740Jy sigma=0.500785 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.065 mas, bmaj=1.145 mas, bpa=-63.97 degrees ! Estimated noise=0.374706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504463 Jy ! Component: 100 - total flux cleaned = 0.00801402 Jy ! Component: 150 - total flux cleaned = 0.00987877 Jy ! Component: 200 - total flux cleaned = 0.0110587 Jy ! Total flux subtracted in 200 components = 0.0110587 Jy ! Clean residual min=-0.004406 max=0.005173 Jy/beam ! Clean residual mean=0.000003 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.20792 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.20792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062349Jy sigma=0.496769 ! Fit after self-cal, rms=0.062315Jy sigma=0.496391 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.065 x 1.145 at -63.97 degrees (North through East) ! Clean map min=-0.0042784 max=0.18194 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.01 KP 1.08 ! LA 0.99 MK 1.02 NL 1.14 OV 0.93 ! PT 0.88 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.01 KP 1.05 ! LA 1.01 MK 1.01 NL 1.14 OV 0.93 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.01 KP 1.07 ! LA 0.99 MK 1.02 NL 1.16 OV 0.94 ! PT 0.90 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 0.97 KP 1.07 ! LA 1.01 MK 1.01 NL 1.14 OV 0.91 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 1.01 KP 1.08 ! LA 0.97 MK 1.00 NL 1.13 OV 0.91 ! PT 0.90 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.01 KP 1.07 ! LA 1.00 MK 1.02 NL 1.15 OV 0.94 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.00 KP 1.07 ! LA 1.00 MK 0.99 NL 1.14 OV 0.92 ! PT 0.90 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.02 KP 1.08 ! LA 0.98 MK 1.05 NL 1.14 OV 0.93 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 1.00 KP 1.06 ! LA 0.99 MK 1.01 NL 1.17 OV 0.92 ! PT 0.90 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.02 KP 1.07 ! LA 0.99 MK 1.02 NL 1.13 OV 0.94 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.03 KP 1.06 ! LA 0.99 MK 0.98 NL 1.15 OV 0.93 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.02 KP 1.09 ! LA 1.02 MK 1.01 NL 1.17 OV 0.92 ! PT 0.90 SC 1.03 ! ! ! Fit before self-cal, rms=0.062315Jy sigma=0.496391 ! Fit after self-cal, rms=0.059631Jy sigma=0.471600 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.074 mas, bmaj=1.155 mas, bpa=-63.85 degrees ! Estimated noise=0.374636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155995 Jy ! Component: 100 - total flux cleaned = 0.00136176 Jy ! Component: 150 - total flux cleaned = 0.00119461 Jy ! Component: 200 - total flux cleaned = 0.000968614 Jy ! Total flux subtracted in 200 components = 0.000968614 Jy ! Clean residual min=-0.002351 max=0.003202 Jy/beam ! Clean residual mean=0.000002 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.208888 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.208889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059269Jy sigma=0.469343 ! Fit after self-cal, rms=0.059286Jy sigma=0.469134 ! Inverting map ! Added new window around map position (-6.4, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259328 Jy ! Component: 100 - total flux cleaned = -0.000283642 Jy ! Component: 150 - total flux cleaned = -0.000469736 Jy ! Component: 200 - total flux cleaned = -0.000550977 Jy ! Total flux subtracted in 200 components = -0.000550977 Jy ! Clean residual min=-0.002152 max=0.002676 Jy/beam ! Clean residual mean=0.000002 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.208338 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.208338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058885Jy sigma=0.466738 ! Fit after self-cal, rms=0.058871Jy sigma=0.466625 ! Inverting map ! Added new window around map position (-28.8, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179199 Jy ! Component: 100 - total flux cleaned = 0.0017158 Jy ! Component: 150 - total flux cleaned = 0.00164602 Jy ! Component: 200 - total flux cleaned = 0.00158057 Jy ! Total flux subtracted in 200 components = 0.00158057 Jy ! Clean residual min=-0.002064 max=0.002475 Jy/beam ! Clean residual mean=0.000002 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.209918 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 88 components and 0.209918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058647Jy sigma=0.465329 ! Fit after self-cal, rms=0.058641Jy sigma=0.465261 ! Inverting map ! Added new window around map position (-4.4, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000929772 Jy ! Component: 100 - total flux cleaned = 0.00127444 Jy ! Component: 150 - total flux cleaned = 0.00133619 Jy ! Component: 200 - total flux cleaned = 0.0013348 Jy ! Total flux subtracted in 200 components = 0.0013348 Jy ! Clean residual min=-0.001973 max=0.002373 Jy/beam ! Clean residual mean=0.000002 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.211253 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 109 components and 0.211253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058450Jy sigma=0.464134 ! Fit after self-cal, rms=0.058447Jy sigma=0.464090 ! Inverting map ! Added new window around map position (-10.4, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105223 Jy ! Component: 100 - total flux cleaned = 0.00118435 Jy ! Component: 150 - total flux cleaned = 0.00112639 Jy ! Component: 200 - total flux cleaned = 0.00112621 Jy ! Total flux subtracted in 200 components = 0.00112621 Jy ! Clean residual min=-0.001867 max=0.002196 Jy/beam ! Clean residual mean=0.000002 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.212379 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 137 components and 0.212379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058277Jy sigma=0.463121 ! Fit after self-cal, rms=0.058274Jy sigma=0.463090 ! Inverting map ! Added new window around map position (9, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147773 Jy ! Component: 100 - total flux cleaned = 0.001597 Jy ! Component: 150 - total flux cleaned = 0.00164885 Jy ! Component: 200 - total flux cleaned = 0.00180302 Jy ! Total flux subtracted in 200 components = 0.00180302 Jy ! Clean residual min=-0.001721 max=0.002100 Jy/beam ! Clean residual mean=0.000002 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.214182 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 151 components and 0.214182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058131Jy sigma=0.462243 ! Fit after self-cal, rms=0.058128Jy sigma=0.462216 ! Inverting map ! Added new window around map position (1.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000992954 Jy ! Component: 100 - total flux cleaned = 0.00110631 Jy ! Component: 150 - total flux cleaned = 0.00110736 Jy ! Component: 200 - total flux cleaned = 0.00105954 Jy ! Total flux subtracted in 200 components = 0.00105954 Jy ! Clean residual min=-0.001708 max=0.001905 Jy/beam ! Clean residual mean=0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.215242 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 173 components and 0.215242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058006Jy sigma=0.461479 ! Fit after self-cal, rms=0.058002Jy sigma=0.461438 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058002Jy sigma=0.461438 ! Fit after self-cal, rms=0.059936Jy sigma=0.454347 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.077 mas, bmaj=1.151 mas, bpa=-61.52 degrees ! Estimated noise=0.376877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000541781 Jy ! Component: 100 - total flux cleaned = -0.000619186 Jy ! Component: 150 - total flux cleaned = -0.000654128 Jy ! Component: 200 - total flux cleaned = -0.000684546 Jy ! Total flux subtracted in 200 components = -0.000684546 Jy ! Clean residual min=-0.001086 max=0.000984 Jy/beam ! Clean residual mean=0.000001 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.214557 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 195 components and 0.214557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059891Jy sigma=0.454005 ! Fit after self-cal, rms=0.059921Jy sigma=0.453948 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168449 Jy ! Component: 100 - total flux cleaned = -0.000250446 Jy ! Component: 150 - total flux cleaned = -0.000276498 Jy ! Component: 200 - total flux cleaned = -0.000324265 Jy ! Total flux subtracted in 200 components = -0.000324265 Jy ! Clean residual min=-0.001062 max=0.000961 Jy/beam ! Clean residual mean=0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.214233 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 210 components and 0.214233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059899Jy sigma=0.453773 ! Fit after self-cal, rms=0.059897Jy sigma=0.453767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059897Jy sigma=0.453767 ! Fit after self-cal, rms=0.060092Jy sigma=0.453727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.077 mas, bmaj=1.151 mas, bpa=-61.46 degrees ! Estimated noise=0.376625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000396418 Jy ! Component: 100 - total flux cleaned = -0.000475821 Jy ! Component: 150 - total flux cleaned = -0.000475939 Jy ! Component: 200 - total flux cleaned = -0.000523714 Jy ! Total flux subtracted in 200 components = -0.000523714 Jy ! Clean residual min=-0.001037 max=0.000898 Jy/beam ! Clean residual mean=0.000001 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.213709 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 221 components and 0.213709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060070Jy sigma=0.453563 ! Fit after self-cal, rms=0.060071Jy sigma=0.453558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144688 Jy ! Component: 100 - total flux cleaned = -0.000189235 Jy ! Component: 150 - total flux cleaned = -0.000209928 Jy ! Component: 200 - total flux cleaned = -0.000209649 Jy ! Total flux subtracted in 200 components = -0.000209649 Jy ! Clean residual min=-0.001013 max=0.000858 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.2135 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 229 components and 0.2135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060056Jy sigma=0.453444 ! Fit after self-cal, rms=0.060056Jy sigma=0.453441 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060056Jy sigma=0.453441 ! Fit after self-cal, rms=0.060167Jy sigma=0.453419 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.445 mas, bmaj=2.667 mas, bpa=-84.24 degrees ! Estimated noise=0.473569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319833 Jy ! Component: 100 - total flux cleaned = 0.000270388 Jy ! Component: 150 - total flux cleaned = 0.000210203 Jy ! Component: 200 - total flux cleaned = 0.000156695 Jy ! Total flux subtracted in 200 components = 0.000156695 Jy ! Clean residual min=-0.000899 max=0.000948 Jy/beam ! Clean residual mean=0.000001 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.213656 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 248 components and 0.213656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060160Jy sigma=0.453363 ! Fit after self-cal, rms=0.060161Jy sigma=0.453354 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.36973e-05 Jy ! Component: 100 - total flux cleaned = -9.84734e-05 Jy ! Component: 150 - total flux cleaned = -0.000112856 Jy ! Component: 200 - total flux cleaned = -0.000140785 Jy ! Total flux subtracted in 200 components = -0.000140785 Jy ! Clean residual min=-0.000874 max=0.000911 Jy/beam ! Clean residual mean=0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.213515 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 261 components and 0.213515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060158Jy sigma=0.453333 ! Fit after self-cal, rms=0.060158Jy sigma=0.453332 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.151 mas, bpa=-61.43 degrees ! Estimated noise=0.376336 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.076 x 1.151 at -61.43 degrees (North through East) ! Clean map min=-0.0015768 max=0.18137 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7993 mas, bmaj=0.8685 mas, bpa=-31.4 degrees ! Estimated noise=0.964069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14018 Jy ! Component: 100 - total flux cleaned = 0.171081 Jy ! Component: 150 - total flux cleaned = 0.181656 Jy ! Component: 200 - total flux cleaned = 0.18798 Jy ! Total flux subtracted in 200 components = 0.18798 Jy ! Clean residual min=-0.002445 max=0.003468 Jy/beam ! Clean residual mean=0.000004 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.18798 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.18798 Jy ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.151 mas, bpa=-61.43 degrees ! Estimated noise=0.376336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720242 Jy ! Component: 100 - total flux cleaned = 0.0110044 Jy ! Component: 150 - total flux cleaned = 0.0135685 Jy ! Component: 200 - total flux cleaned = 0.0156103 Jy ! Total flux subtracted in 200 components = 0.0156103 Jy ! Clean residual min=-0.001089 max=0.001495 Jy/beam ! Clean residual mean=0.000003 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.20359 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 53 components and 0.20359 Jy ! Inverting map ! Added new window around map position (5.8, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179379 Jy ! Component: 100 - total flux cleaned = 0.00308177 Jy ! Component: 150 - total flux cleaned = 0.00396118 Jy ! Component: 200 - total flux cleaned = 0.00461028 Jy ! Total flux subtracted in 200 components = 0.00461028 Jy ! Clean residual min=-0.000913 max=0.001113 Jy/beam ! Clean residual mean=0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.208201 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 82 components and 0.208201 Jy ! Inverting map ! Added new window around map position (28.2, 8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757917 Jy ! Component: 100 - total flux cleaned = 0.00123378 Jy ! Component: 150 - total flux cleaned = 0.00163831 Jy ! Component: 200 - total flux cleaned = 0.002018 Jy ! Total flux subtracted in 200 components = 0.002018 Jy ! Clean residual min=-0.000862 max=0.000993 Jy/beam ! Clean residual mean=0.000002 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.210219 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 105 components and 0.210219 Jy ! Inverting map ! Added new window around map position (-28.8, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574804 Jy ! Component: 100 - total flux cleaned = 0.000883127 Jy ! Component: 150 - total flux cleaned = 0.00120383 Jy ! Component: 200 - total flux cleaned = 0.00150722 Jy ! Total flux subtracted in 200 components = 0.00150722 Jy ! Clean residual min=-0.000827 max=0.000883 Jy/beam ! Clean residual mean=0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.211726 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 121 components and 0.211726 Jy ! Inverting map ! Added new window around map position (8, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000640889 Jy ! Component: 100 - total flux cleaned = 0.000866711 Jy ! Component: 150 - total flux cleaned = 0.00100071 Jy ! Component: 200 - total flux cleaned = 0.00112992 Jy ! Total flux subtracted in 200 components = 0.00112992 Jy ! Clean residual min=-0.000804 max=0.000851 Jy/beam ! Clean residual mean=0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.212856 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 137 components and 0.212856 Jy ! Inverting map ! Added new window around map position (-4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542551 Jy ! Component: 100 - total flux cleaned = 0.000690463 Jy ! Component: 150 - total flux cleaned = 0.000808513 Jy ! Component: 200 - total flux cleaned = 0.000899824 Jy ! Total flux subtracted in 200 components = 0.000899824 Jy ! Clean residual min=-0.000757 max=0.000764 Jy/beam ! Clean residual mean=0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.213756 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 154 components and 0.213756 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.445 mas, bmaj=2.667 mas, bpa=-84.24 degrees ! Estimated noise=0.473569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000637269 Jy ! Component: 100 - total flux cleaned = 0.000902397 Jy ! Component: 150 - total flux cleaned = 0.00104371 Jy ! Component: 200 - total flux cleaned = 0.00109183 Jy ! Total flux subtracted in 200 components = 0.00109183 Jy ! Clean residual min=-0.000745 max=0.000919 Jy/beam ! Clean residual mean=0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.214847 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39.6, 30.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415588 Jy ! Component: 100 - total flux cleaned = 0.000416638 Jy ! Component: 150 - total flux cleaned = 0.000399398 Jy ! Component: 200 - total flux cleaned = 0.00039938 Jy ! Total flux subtracted in 200 components = 0.00039938 Jy ! Clean residual min=-0.000720 max=0.000764 Jy/beam ! Clean residual mean=0.000000 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.215247 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 193 components and 0.215247 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.151 mas, bpa=-61.43 degrees ! Estimated noise=0.376336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.55267e-05 Jy ! Component: 100 - total flux cleaned = -0.000140101 Jy ! Component: 150 - total flux cleaned = -0.000203037 Jy ! Component: 200 - total flux cleaned = -0.000182087 Jy ! Total flux subtracted in 200 components = -0.000182087 Jy ! Clean residual min=-0.000749 max=0.000710 Jy/beam ! Clean residual mean=0.000000 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.215065 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 214 components and 0.215065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060167Jy sigma=0.452958 ! Fit after self-cal, rms=0.060152Jy sigma=0.452888 wmodel J1220+7105_X_map.mod ! Writing 214 model components to file: J1220+7105_X_map.mod wobs J1220+7105_X_uvs.fits ! Writing UV FITS file: J1220+7105_X_uvs.fits wwins J1220+7105_X_map.win ! wwins: Wrote 15 windows to J1220+7105_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111292 Jy ! Component: 100 - total flux cleaned = -0.000202246 Jy ! Component: 150 - total flux cleaned = -0.000252709 Jy ! Component: 200 - total flux cleaned = -0.000301574 Jy ! Component: 250 - total flux cleaned = -0.000325464 Jy ! Component: 300 - total flux cleaned = -0.000372549 Jy ! Component: 350 - total flux cleaned = -0.00038415 Jy ! Component: 400 - total flux cleaned = -0.000441082 Jy ! Component: 450 - total flux cleaned = -0.000418964 Jy ! Component: 500 - total flux cleaned = -0.000441305 Jy ! Component: 550 - total flux cleaned = -0.000452335 Jy ! Component: 600 - total flux cleaned = -0.000463277 Jy ! Component: 650 - total flux cleaned = -0.00049536 Jy ! Component: 700 - total flux cleaned = -0.00048489 Jy ! Component: 750 - total flux cleaned = -0.000495419 Jy ! Component: 800 - total flux cleaned = -0.000505865 Jy ! Component: 850 - total flux cleaned = -0.000505911 Jy ! Component: 900 - total flux cleaned = -0.000526259 Jy ! Component: 950 - total flux cleaned = -0.000475934 Jy ! Component: 1000 - total flux cleaned = -0.000485949 Jy ! Component: 1050 - total flux cleaned = -0.000446343 Jy ! Component: 1100 - total flux cleaned = -0.000436616 Jy ! Component: 1150 - total flux cleaned = -0.000446515 Jy ! Component: 1200 - total flux cleaned = -0.000417522 Jy ! Component: 1250 - total flux cleaned = -0.000388713 Jy ! Component: 1300 - total flux cleaned = -0.000360169 Jy ! Component: 1350 - total flux cleaned = -0.000350728 Jy ! Component: 1400 - total flux cleaned = -0.000350712 Jy ! Component: 1450 - total flux cleaned = -0.000313273 Jy ! Component: 1500 - total flux cleaned = -0.000266831 Jy ! Component: 1550 - total flux cleaned = -0.00026678 Jy ! Component: 1600 - total flux cleaned = -0.000248367 Jy ! Component: 1650 - total flux cleaned = -0.000239206 Jy ! Component: 1700 - total flux cleaned = -0.000230228 Jy ! Component: 1750 - total flux cleaned = -0.000248359 Jy ! Component: 1800 - total flux cleaned = -0.000230403 Jy ! Component: 1850 - total flux cleaned = -0.00023042 Jy ! Component: 1900 - total flux cleaned = -0.000230427 Jy ! Component: 1950 - total flux cleaned = -0.000256924 Jy ! Component: 2000 - total flux cleaned = -0.000248106 Jy ! Component: 2050 - total flux cleaned = -0.000213178 Jy ! Component: 2100 - total flux cleaned = -0.000247951 Jy ! Component: 2150 - total flux cleaned = -0.000213393 Jy ! Component: 2200 - total flux cleaned = -0.000213412 Jy ! Component: 2250 - total flux cleaned = -0.00021345 Jy ! Component: 2300 - total flux cleaned = -0.000221921 Jy ! Component: 2350 - total flux cleaned = -0.000171057 Jy ! Component: 2400 - total flux cleaned = -0.000171017 Jy ! Component: 2450 - total flux cleaned = -0.000171088 Jy ! Component: 2500 - total flux cleaned = -0.000145972 Jy ! Component: 2550 - total flux cleaned = -9.60985e-05 Jy ! Component: 2600 - total flux cleaned = -0.000104399 Jy ! Component: 2650 - total flux cleaned = -6.31909e-05 Jy ! Component: 2700 - total flux cleaned = -5.50011e-05 Jy ! Component: 2750 - total flux cleaned = -3.06078e-05 Jy ! Component: 2800 - total flux cleaned = -6.29518e-06 Jy ! Component: 2850 - total flux cleaned = -6.31145e-06 Jy ! Component: 2900 - total flux cleaned = 9.73199e-06 Jy ! Component: 2950 - total flux cleaned = 3.38045e-05 Jy ! Component: 3000 - total flux cleaned = 7.36649e-05 Jy ! Component: 3050 - total flux cleaned = 8.95048e-05 Jy ! Component: 3100 - total flux cleaned = 0.000121151 Jy ! Component: 3150 - total flux cleaned = 0.000128874 Jy ! Component: 3200 - total flux cleaned = 0.000160268 Jy ! Component: 3250 - total flux cleaned = 0.000152459 Jy ! Component: 3300 - total flux cleaned = 0.000183506 Jy ! Component: 3350 - total flux cleaned = 0.000222153 Jy ! Component: 3400 - total flux cleaned = 0.000237533 Jy ! Component: 3450 - total flux cleaned = 0.000222135 Jy ! Component: 3500 - total flux cleaned = 0.000252688 Jy ! Component: 3550 - total flux cleaned = 0.000260292 Jy ! Component: 3600 - total flux cleaned = 0.000290568 Jy ! Component: 3650 - total flux cleaned = 0.000313165 Jy ! Component: 3700 - total flux cleaned = 0.000283136 Jy ! Component: 3750 - total flux cleaned = 0.000342988 Jy ! Component: 3800 - total flux cleaned = 0.000335487 Jy ! Component: 3850 - total flux cleaned = 0.000380065 Jy ! Component: 3900 - total flux cleaned = 0.000372639 Jy ! Component: 3950 - total flux cleaned = 0.000431649 Jy ! Component: 4000 - total flux cleaned = 0.000424311 Jy ! Component: 4050 - total flux cleaned = 0.000475517 Jy ! Total flux subtracted in 4096 components = 0.000460956 Jy ! Clean residual min=-0.000555 max=0.000445 Jy/beam ! Clean residual mean=0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.215526 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 549 components and 0.215526 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1220+7105_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.076 x 1.151 at -61.43 degrees (North through East) ! Clean map min=-0.0012731 max=0.18276 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1220+7105_X_map.fits wmodel /image_prod/ug002_uva//J1220+7105_X_map.mod ! Writing 549 model components to file: /image_prod/ug002_uva//J1220+7105_X_map.mod wobs /image_prod/ug002_uva//J1220+7105_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1220+7105_X_uvs.fits wwins /image_prod/ug002_uva//J1220+7105_X_map.win ! wwins: Wrote 16 windows to /image_prod/ug002_uva//J1220+7105_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.182763 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000124408 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.204212 0.204212 0.408424 0.816848 1.6337 3.26739 6.53478 13.0696 26.1391 52.2783 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.182 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1469.06 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1220+7105_X_dfm.log closed on Thu Mar 5 00:36:23 2020