! Started logfile: /image_prod/ug002_uva//J1218+1738_S_dfm.log on Thu Mar  5 00:34:06 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1218+1738_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1218+1738_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.786173 visibilities/baseline/integration-bin.
! Found source: J1218+1738
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4776 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1218+1738_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016029Jy  sigma=9.000721
! Fit after  self-cal, rms=0.800097Jy  sigma=7.112962
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.203 mas, bmaj=8.798 mas, bpa=-3.744 degrees
! Estimated noise=1.59472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.159296 Jy
! Component: 100  -  total flux cleaned = 0.194889 Jy
! Total flux subtracted in 100 components = 0.194889 Jy
! Clean residual min=-0.013580 max=0.017178 Jy/beam
! Clean residual mean=0.000012 rms=0.003040 Jy/beam
! Combined flux in latest and established models = 0.194889 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.194889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076257Jy  sigma=0.625376
! Fit after  self-cal, rms=0.076244Jy  sigma=0.625218
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.793 mas, bmaj=9.342 mas, bpa=-3.272 degrees
! Estimated noise=1.18379 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.5, -3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108804 Jy
! Component: 100  -  total flux cleaned = 0.0154974 Jy
! Component: 150  -  total flux cleaned = 0.0176667 Jy
! Component: 200  -  total flux cleaned = 0.0201271 Jy
! Total flux subtracted in 200 components = 0.0201271 Jy
! Clean residual min=-0.012286 max=0.006642 Jy/beam
! Clean residual mean=0.000020 rms=0.002182 Jy/beam
! Combined flux in latest and established models = 0.215016 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 69 components and 0.215016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072115Jy  sigma=0.584133
! Fit after  self-cal, rms=0.071888Jy  sigma=0.582262
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.793 x 9.342 at -3.272 degrees (North through East)
! Clean map  min=-0.01196  max=0.20268 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.05     HN        1.02     KP        1.04     
!   LA        1.03     MK        1.06     NL        1.08     OV        0.68     
!   PT        1.06     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        1.00     KP        1.02     
!   LA        1.01     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.01     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.07     HN        1.06     KP        1.04     
!   LA        1.01     MK        1.03     NL        0.95     OV        0.66     
!   PT        1.04     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.071888Jy  sigma=0.582262
! Fit after  self-cal, rms=0.060181Jy  sigma=0.478626
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.822 mas, bmaj=9.522 mas, bpa=-3.091 degrees
! Estimated noise=1.17144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00537548 Jy
! Component: 100  -  total flux cleaned = 0.00649442 Jy
! Component: 150  -  total flux cleaned = 0.00685512 Jy
! Component: 200  -  total flux cleaned = 0.00732029 Jy
! Total flux subtracted in 200 components = 0.00732029 Jy
! Clean residual min=-0.003377 max=0.003340 Jy/beam
! Clean residual mean=-0.000000 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.222337 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.222337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059639Jy  sigma=0.473035
! Fit after  self-cal, rms=0.059794Jy  sigma=0.471614
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059794Jy  sigma=0.471614
! Fit after  self-cal, rms=0.059728Jy  sigma=0.461916
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.821 mas, bmaj=9.477 mas, bpa=-3.043 degrees
! Estimated noise=1.17052 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291822 Jy
! Component: 100  -  total flux cleaned = 0.00422962 Jy
! Component: 150  -  total flux cleaned = 0.00456662 Jy
! Component: 200  -  total flux cleaned = 0.00457064 Jy
! Total flux subtracted in 200 components = 0.00457064 Jy
! Clean residual min=-0.002163 max=0.002434 Jy/beam
! Clean residual mean=-0.000001 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.226907 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 103 components and 0.226907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059560Jy  sigma=0.460106
! Fit after  self-cal, rms=0.059570Jy  sigma=0.459870
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000683515 Jy
! Component: 100  -  total flux cleaned = 0.000640987 Jy
! Component: 150  -  total flux cleaned = 0.000603907 Jy
! Component: 200  -  total flux cleaned = 0.000570713 Jy
! Total flux subtracted in 200 components = 0.000570713 Jy
! Clean residual min=-0.002122 max=0.002192 Jy/beam
! Clean residual mean=-0.000001 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.227478 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 107 components and 0.227478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059514Jy  sigma=0.459383
! Fit after  self-cal, rms=0.059503Jy  sigma=0.459344
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059503Jy  sigma=0.459344
! Fit after  self-cal, rms=0.059709Jy  sigma=0.458958
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.812 mas, bmaj=9.475 mas, bpa=-3.034 degrees
! Estimated noise=1.17076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147297 Jy
! Component: 100  -  total flux cleaned = 0.00212736 Jy
! Component: 150  -  total flux cleaned = 0.00216167 Jy
! Component: 200  -  total flux cleaned = 0.00213434 Jy
! Total flux subtracted in 200 components = 0.00213434 Jy
! Clean residual min=-0.002136 max=0.002034 Jy/beam
! Clean residual mean=-0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.229612 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 117 components and 0.229612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059658Jy  sigma=0.458485
! Fit after  self-cal, rms=0.059663Jy  sigma=0.458436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000337926 Jy
! Component: 100  -  total flux cleaned = 0.000286477 Jy
! Component: 150  -  total flux cleaned = 0.000287307 Jy
! Component: 200  -  total flux cleaned = 0.000287284 Jy
! Total flux subtracted in 200 components = 0.000287284 Jy
! Clean residual min=-0.002083 max=0.001919 Jy/beam
! Clean residual mean=-0.000002 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.229899 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 122 components and 0.229899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059643Jy  sigma=0.458256
! Fit after  self-cal, rms=0.059638Jy  sigma=0.458245
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059638Jy  sigma=0.458245
! Fit after  self-cal, rms=0.059700Jy  sigma=0.458154
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.504 mas, bmaj=11.68 mas, bpa=-6.831 degrees
! Estimated noise=1.32385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000862181 Jy
! Component: 100  -  total flux cleaned = 0.00113633 Jy
! Component: 150  -  total flux cleaned = 0.00125333 Jy
! Component: 200  -  total flux cleaned = 0.00128389 Jy
! Total flux subtracted in 200 components = 0.00128389 Jy
! Clean residual min=-0.002181 max=0.001829 Jy/beam
! Clean residual mean=-0.000003 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.231183 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 144 components and 0.231183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059688Jy  sigma=0.458071
! Fit after  self-cal, rms=0.059690Jy  sigma=0.458048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123398 Jy
! Component: 100  -  total flux cleaned = 0.000225258 Jy
! Component: 150  -  total flux cleaned = 0.000269815 Jy
! Component: 200  -  total flux cleaned = 0.000301846 Jy
! Total flux subtracted in 200 components = 0.000301846 Jy
! Clean residual min=-0.002170 max=0.001851 Jy/beam
! Clean residual mean=-0.000003 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.231485 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 159 components and 0.231485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059687Jy  sigma=0.458039
! Fit after  self-cal, rms=0.059684Jy  sigma=0.458030
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=9.475 mas, bpa=-3.028 degrees
! Estimated noise=1.17111 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.806 x 9.475 at -3.028 degrees (North through East)
! Clean map  min=-0.0024648  max=0.19911 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=8.915 mas, bpa=-3.355 degrees
! Estimated noise=1.55811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155589 Jy
! Component: 100  -  total flux cleaned = 0.191917 Jy
! Component: 150  -  total flux cleaned = 0.207225 Jy
! Component: 200  -  total flux cleaned = 0.21584 Jy
! Total flux subtracted in 200 components = 0.21584 Jy
! Clean residual min=-0.003876 max=0.004556 Jy/beam
! Clean residual mean=-0.000006 rms=0.001031 Jy/beam
! Combined flux in latest and established models = 0.21584 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.21584 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=9.475 mas, bpa=-3.028 degrees
! Estimated noise=1.17111 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00646761 Jy
! Component: 100  -  total flux cleaned = 0.0099786 Jy
! Component: 150  -  total flux cleaned = 0.0115606 Jy
! Component: 200  -  total flux cleaned = 0.0126664 Jy
! Total flux subtracted in 200 components = 0.0126664 Jy
! Clean residual min=-0.001974 max=0.001909 Jy/beam
! Clean residual mean=-0.000004 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.228506 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 62 components and 0.228506 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.504 mas, bmaj=11.68 mas, bpa=-6.831 degrees
! Estimated noise=1.32385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181423 Jy
! Component: 100  -  total flux cleaned = 0.00261807 Jy
! Component: 150  -  total flux cleaned = 0.00304348 Jy
! Component: 200  -  total flux cleaned = 0.00319404 Jy
! Total flux subtracted in 200 components = 0.00319404 Jy
! Clean residual min=-0.002051 max=0.002074 Jy/beam
! Clean residual mean=-0.000005 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.2317 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121548 Jy
! Component: 100  -  total flux cleaned = 0.000196513 Jy
! Component: 150  -  total flux cleaned = 0.000260072 Jy
! Component: 200  -  total flux cleaned = 0.000314573 Jy
! Total flux subtracted in 200 components = 0.000314573 Jy
! Clean residual min=-0.002015 max=0.001979 Jy/beam
! Clean residual mean=-0.000004 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.232015 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 137 components and 0.232015 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=9.475 mas, bpa=-3.028 degrees
! Estimated noise=1.17111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000304563 Jy
! Component: 100  -  total flux cleaned = -0.000336032 Jy
! Component: 150  -  total flux cleaned = -0.000281504 Jy
! Component: 200  -  total flux cleaned = -0.000233231 Jy
! Total flux subtracted in 200 components = -0.000233231 Jy
! Clean residual min=-0.002004 max=0.001902 Jy/beam
! Clean residual mean=-0.000002 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.231782 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 147 components and 0.231782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059683Jy  sigma=0.457938
! Fit after  self-cal, rms=0.059674Jy  sigma=0.457900
wmodel J1218+1738_S_map.mod
! Writing 147 model components to file: J1218+1738_S_map.mod
wobs   J1218+1738_S_uvs.fits
! Writing UV FITS file: J1218+1738_S_uvs.fits
wwins  J1218+1738_S_map.win
! wwins: Wrote 2 windows to J1218+1738_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00026634 Jy
! Component: 100  -  total flux cleaned = -0.00040104 Jy
! Component: 150  -  total flux cleaned = -0.000525036 Jy
! Component: 200  -  total flux cleaned = -0.000702882 Jy
! Component: 250  -  total flux cleaned = -0.000874332 Jy
! Component: 300  -  total flux cleaned = -0.000957595 Jy
! Component: 350  -  total flux cleaned = -0.00103769 Jy
! Component: 400  -  total flux cleaned = -0.00111556 Jy
! Component: 450  -  total flux cleaned = -0.00124269 Jy
! Component: 500  -  total flux cleaned = -0.00131727 Jy
! Component: 550  -  total flux cleaned = -0.0013903 Jy
! Component: 600  -  total flux cleaned = -0.00143779 Jy
! Component: 650  -  total flux cleaned = -0.00153089 Jy
! Component: 700  -  total flux cleaned = -0.00157638 Jy
! Component: 750  -  total flux cleaned = -0.00162089 Jy
! Component: 800  -  total flux cleaned = -0.00170889 Jy
! Component: 850  -  total flux cleaned = -0.00177425 Jy
! Component: 900  -  total flux cleaned = -0.00200693 Jy
! Component: 950  -  total flux cleaned = -0.00211094 Jy
! Component: 1000  -  total flux cleaned = -0.00223411 Jy
! Component: 1050  -  total flux cleaned = -0.00235606 Jy
! Component: 1100  -  total flux cleaned = -0.00245597 Jy
! Component: 1150  -  total flux cleaned = -0.00259353 Jy
! Component: 1200  -  total flux cleaned = -0.00259317 Jy
! Component: 1250  -  total flux cleaned = -0.00265071 Jy
! Component: 1300  -  total flux cleaned = -0.0027455 Jy
! Component: 1350  -  total flux cleaned = -0.00285741 Jy
! Component: 1400  -  total flux cleaned = -0.00283897 Jy
! Component: 1450  -  total flux cleaned = -0.00293009 Jy
! Component: 1500  -  total flux cleaned = -0.00298403 Jy
! Component: 1550  -  total flux cleaned = -0.00303741 Jy
! Component: 1600  -  total flux cleaned = -0.00312511 Jy
! Component: 1650  -  total flux cleaned = -0.00314267 Jy
! Component: 1700  -  total flux cleaned = -0.00317732 Jy
! Component: 1750  -  total flux cleaned = -0.00324525 Jy
! Component: 1800  -  total flux cleaned = -0.00332938 Jy
! Component: 1850  -  total flux cleaned = -0.00336242 Jy
! Component: 1900  -  total flux cleaned = -0.00336238 Jy
! Component: 1950  -  total flux cleaned = -0.00342747 Jy
! Component: 2000  -  total flux cleaned = -0.0035398 Jy
! Component: 2050  -  total flux cleaned = -0.00357136 Jy
! Component: 2100  -  total flux cleaned = -0.0035714 Jy
! Component: 2150  -  total flux cleaned = -0.00361825 Jy
! Component: 2200  -  total flux cleaned = -0.00367961 Jy
! Component: 2250  -  total flux cleaned = -0.00369492 Jy
! Component: 2300  -  total flux cleaned = -0.00375547 Jy
! Component: 2350  -  total flux cleaned = -0.0038152 Jy
! Component: 2400  -  total flux cleaned = -0.00384497 Jy
! Component: 2450  -  total flux cleaned = -0.00388898 Jy
! Component: 2500  -  total flux cleaned = -0.00399072 Jy
! Component: 2550  -  total flux cleaned = -0.0040339 Jy
! Component: 2600  -  total flux cleaned = -0.00413339 Jy
! Component: 2650  -  total flux cleaned = -0.00410515 Jy
! Component: 2700  -  total flux cleaned = -0.00420347 Jy
! Component: 2750  -  total flux cleaned = -0.0042588 Jy
! Component: 2800  -  total flux cleaned = -0.00427257 Jy
! Component: 2850  -  total flux cleaned = -0.0043136 Jy
! Component: 2900  -  total flux cleaned = -0.00431376 Jy
! Component: 2950  -  total flux cleaned = -0.00436735 Jy
! Component: 3000  -  total flux cleaned = -0.00439383 Jy
! Component: 3050  -  total flux cleaned = -0.0044072 Jy
! Component: 3100  -  total flux cleaned = -0.00444645 Jy
! Component: 3150  -  total flux cleaned = -0.00443349 Jy
! Component: 3200  -  total flux cleaned = -0.00448506 Jy
! Component: 3250  -  total flux cleaned = -0.00447241 Jy
! Component: 3300  -  total flux cleaned = -0.00453572 Jy
! Component: 3350  -  total flux cleaned = -0.00461088 Jy
! Component: 3400  -  total flux cleaned = -0.00463578 Jy
! Component: 3450  -  total flux cleaned = -0.00464793 Jy
! Component: 3500  -  total flux cleaned = -0.00467251 Jy
! Component: 3550  -  total flux cleaned = -0.00469691 Jy
! Component: 3600  -  total flux cleaned = -0.00472116 Jy
! Component: 3650  -  total flux cleaned = -0.00475718 Jy
! Component: 3700  -  total flux cleaned = -0.004793 Jy
! Component: 3750  -  total flux cleaned = -0.0048284 Jy
! Component: 3800  -  total flux cleaned = -0.00482837 Jy
! Component: 3850  -  total flux cleaned = -0.00484004 Jy
! Component: 3900  -  total flux cleaned = -0.00487489 Jy
! Component: 3950  -  total flux cleaned = -0.00487487 Jy
! Component: 4000  -  total flux cleaned = -0.00489777 Jy
! Component: 4050  -  total flux cleaned = -0.00489784 Jy
! Total flux subtracted in 4096 components = -0.00493181 Jy
! Clean residual min=-0.000628 max=0.000774 Jy/beam
! Clean residual mean=-0.000001 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.22685 Jy
keep
! Adding 299 model components to the UV plane model.
! The established model now contains 446 components and 0.22685 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1218+1738_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.806 x 9.475 at -3.028 degrees (North through East)
! Clean map  min=-0.0023225  max=0.19896 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1218+1738_S_map.fits
wmodel /image_prod/ug002_uva//J1218+1738_S_map.mod
! Writing 446 model components to file: /image_prod/ug002_uva//J1218+1738_S_map.mod
wobs   /image_prod/ug002_uva//J1218+1738_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1218+1738_S_uvs.fits
wwins  /image_prod/ug002_uva//J1218+1738_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1218+1738_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.198959 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000213095 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.321314 0.321314 0.642629 1.28526 2.57051 5.14103 10.2821 20.5641 41.1282 82.2565
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.198 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  933.665 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1218+1738_S_dfm.log closed on Thu Mar  5 00:34:09 2020