! Started logfile: /image_prod/ug002_uva//J1216-1033_S_dfm.log on Thu Mar  5 00:33:23 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1216-1033_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1216-1033_S_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.974444 visibilities/baseline/integration-bin.
! Found source: J1216-1033
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5262 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1216-1033_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017275Jy  sigma=7.994262
! Fit after  self-cal, rms=0.861858Jy  sigma=6.704910
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.78 mas, bmaj=7.21 mas, bpa=-4.428 degrees
! Estimated noise=1.60304 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110825 Jy
! Component: 100  -  total flux cleaned = 0.135435 Jy
! Total flux subtracted in 100 components = 0.135435 Jy
! Clean residual min=-0.008728 max=0.010963 Jy/beam
! Clean residual mean=-0.000005 rms=0.002177 Jy/beam
! Combined flux in latest and established models = 0.135435 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.135435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077827Jy  sigma=0.553351
! Fit after  self-cal, rms=0.077822Jy  sigma=0.553283
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.334 mas, bmaj=8.21 mas, bpa=-2.674 degrees
! Estimated noise=1.28968 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112145 Jy
! Component: 100  -  total flux cleaned = 0.0171804 Jy
! Component: 150  -  total flux cleaned = 0.0205224 Jy
! Component: 200  -  total flux cleaned = 0.0222521 Jy
! Total flux subtracted in 200 components = 0.0222521 Jy
! Clean residual min=-0.008817 max=0.006233 Jy/beam
! Clean residual mean=0.000010 rms=0.001821 Jy/beam
! Combined flux in latest and established models = 0.157687 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 27 components and 0.157687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076383Jy  sigma=0.539317
! Fit after  self-cal, rms=0.076416Jy  sigma=0.539255
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.334 x 8.21 at -2.674 degrees (North through East)
! Clean map  min=-0.0086422  max=0.1389 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.07     HN        1.04     KP        1.04     
!   LA        1.06     MK        1.02     NL        1.00     OV        0.63     
!   PT        1.06     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.45     FD        1.03     HN        1.02     KP        1.02     
!   LA        1.02     MK        1.01     NL        0.99     OV        0.98     
!   PT        1.02     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.28     FD        1.07     HN        1.04     KP        1.08     
!   LA        1.02     MK        1.02     NL        1.04     OV        0.65     
!   PT        1.05     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.076416Jy  sigma=0.539255
! Fit after  self-cal, rms=0.074277Jy  sigma=0.486021
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=8.279 mas, bpa=-2.235 degrees
! Estimated noise=1.2953 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.26491e-05 Jy
! Component: 100  -  total flux cleaned = -0.00022446 Jy
! Component: 150  -  total flux cleaned = -0.000400075 Jy
! Component: 200  -  total flux cleaned = -0.000523789 Jy
! Total flux subtracted in 200 components = -0.000523789 Jy
! Clean residual min=-0.003910 max=0.004109 Jy/beam
! Clean residual mean=-0.000006 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.157163 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.157163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074219Jy  sigma=0.485616
! Fit after  self-cal, rms=0.074510Jy  sigma=0.484700
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074510Jy  sigma=0.484700
! Fit after  self-cal, rms=0.075051Jy  sigma=0.479861
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.327 mas, bmaj=8.315 mas, bpa=-2.355 degrees
! Estimated noise=1.29723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.03534e-05 Jy
! Component: 100  -  total flux cleaned = 4.5094e-07 Jy
! Component: 150  -  total flux cleaned = -3.60258e-05 Jy
! Component: 200  -  total flux cleaned = -7.00084e-05 Jy
! Total flux subtracted in 200 components = -7.00084e-05 Jy
! Clean residual min=-0.003023 max=0.003747 Jy/beam
! Clean residual mean=-0.000003 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.157093 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.157093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075010Jy  sigma=0.479575
! Fit after  self-cal, rms=0.075040Jy  sigma=0.479527
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.5, -14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380932 Jy
! Component: 100  -  total flux cleaned = 0.00588417 Jy
! Component: 150  -  total flux cleaned = 0.00727963 Jy
! Component: 200  -  total flux cleaned = 0.00802977 Jy
! Total flux subtracted in 200 components = 0.00802977 Jy
! Clean residual min=-0.002532 max=0.002473 Jy/beam
! Clean residual mean=-0.000003 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.165123 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 71 components and 0.165123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074838Jy  sigma=0.477464
! Fit after  self-cal, rms=0.074822Jy  sigma=0.477272
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074822Jy  sigma=0.477272
! Fit after  self-cal, rms=0.075069Jy  sigma=0.477164
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.326 mas, bmaj=8.322 mas, bpa=-2.4 degrees
! Estimated noise=1.29649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137159 Jy
! Component: 100  -  total flux cleaned = 0.00201278 Jy
! Component: 150  -  total flux cleaned = 0.00238755 Jy
! Component: 200  -  total flux cleaned = 0.00248121 Jy
! Total flux subtracted in 200 components = 0.00248121 Jy
! Clean residual min=-0.002349 max=0.002319 Jy/beam
! Clean residual mean=-0.000002 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.167604 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 84 components and 0.167604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075028Jy  sigma=0.476789
! Fit after  self-cal, rms=0.075036Jy  sigma=0.476767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000403255 Jy
! Component: 100  -  total flux cleaned = 0.000461502 Jy
! Component: 150  -  total flux cleaned = 0.000516986 Jy
! Component: 200  -  total flux cleaned = 0.000597583 Jy
! Total flux subtracted in 200 components = 0.000597583 Jy
! Clean residual min=-0.002318 max=0.002298 Jy/beam
! Clean residual mean=-0.000002 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.168202 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 93 components and 0.168202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075012Jy  sigma=0.476603
! Fit after  self-cal, rms=0.075012Jy  sigma=0.476597
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075012Jy  sigma=0.476597
! Fit after  self-cal, rms=0.075108Jy  sigma=0.476571
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.643 mas, bmaj=15 mas, bpa=-1.229 degrees
! Estimated noise=1.5662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013421 Jy
! Component: 100  -  total flux cleaned = 0.00164588 Jy
! Component: 150  -  total flux cleaned = 0.00182594 Jy
! Component: 200  -  total flux cleaned = 0.00188584 Jy
! Total flux subtracted in 200 components = 0.00188584 Jy
! Clean residual min=-0.002256 max=0.002375 Jy/beam
! Clean residual mean=-0.000004 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.170088 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 109 components and 0.170088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075107Jy  sigma=0.476518
! Fit after  self-cal, rms=0.075106Jy  sigma=0.476479
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.42839e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147245 Jy
! Component: 150  -  total flux cleaned = 0.000181135 Jy
! Component: 200  -  total flux cleaned = 0.000250826 Jy
! Total flux subtracted in 200 components = 0.000250826 Jy
! Clean residual min=-0.002198 max=0.002345 Jy/beam
! Clean residual mean=-0.000004 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.170338 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 114 components and 0.170338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075110Jy  sigma=0.476497
! Fit after  self-cal, rms=0.075105Jy  sigma=0.476477
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.323 mas, bmaj=8.32 mas, bpa=-2.429 degrees
! Estimated noise=1.29686 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.323 x 8.32 at -2.429 degrees (North through East)
! Clean map  min=-0.0022739  max=0.14136 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.776 mas, bmaj=7.282 mas, bpa=-4.076 degrees
! Estimated noise=1.60791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111061 Jy
! Component: 100  -  total flux cleaned = 0.135856 Jy
! Component: 150  -  total flux cleaned = 0.144094 Jy
! Component: 200  -  total flux cleaned = 0.148981 Jy
! Total flux subtracted in 200 components = 0.148981 Jy
! Clean residual min=-0.003854 max=0.003571 Jy/beam
! Clean residual mean=-0.000008 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.14898 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.14898 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.323 mas, bmaj=8.32 mas, bpa=-2.429 degrees
! Estimated noise=1.29686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468822 Jy
! Component: 100  -  total flux cleaned = 0.00794233 Jy
! Component: 150  -  total flux cleaned = 0.0104581 Jy
! Component: 200  -  total flux cleaned = 0.012443 Jy
! Total flux subtracted in 200 components = 0.012443 Jy
! Clean residual min=-0.002708 max=0.002387 Jy/beam
! Clean residual mean=-0.000006 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.161423 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 60 components and 0.161423 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.643 mas, bmaj=15 mas, bpa=-1.229 degrees
! Estimated noise=1.5662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282961 Jy
! Component: 100  -  total flux cleaned = 0.00464778 Jy
! Component: 150  -  total flux cleaned = 0.0059257 Jy
! Component: 200  -  total flux cleaned = 0.00683683 Jy
! Total flux subtracted in 200 components = 0.00683683 Jy
! Clean residual min=-0.002352 max=0.002333 Jy/beam
! Clean residual mean=-0.000006 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.16826 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000438396 Jy
! Component: 100  -  total flux cleaned = 0.000717091 Jy
! Component: 150  -  total flux cleaned = 0.000923959 Jy
! Component: 200  -  total flux cleaned = 0.00109268 Jy
! Total flux subtracted in 200 components = 0.00109268 Jy
! Clean residual min=-0.002174 max=0.002313 Jy/beam
! Clean residual mean=-0.000005 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.169353 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 94 components and 0.169353 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.323 mas, bmaj=8.32 mas, bpa=-2.429 degrees
! Estimated noise=1.29686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000241355 Jy
! Component: 100  -  total flux cleaned = -0.000272908 Jy
! Component: 150  -  total flux cleaned = -0.000271179 Jy
! Component: 200  -  total flux cleaned = -0.000300757 Jy
! Total flux subtracted in 200 components = -0.000300757 Jy
! Clean residual min=-0.002276 max=0.002277 Jy/beam
! Clean residual mean=-0.000003 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.169052 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 114 components and 0.169052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075128Jy  sigma=0.476323
! Fit after  self-cal, rms=0.075105Jy  sigma=0.476274
wmodel J1216-1033_S_map.mod
! Writing 114 model components to file: J1216-1033_S_map.mod
wobs   J1216-1033_S_uvs.fits
! Writing UV FITS file: J1216-1033_S_uvs.fits
wwins  J1216-1033_S_map.win
! wwins: Wrote 2 windows to J1216-1033_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126567 Jy
! Component: 100  -  total flux cleaned = -0.000509307 Jy
! Component: 150  -  total flux cleaned = -0.000910677 Jy
! Component: 200  -  total flux cleaned = -0.00115665 Jy
! Component: 250  -  total flux cleaned = -0.00136016 Jy
! Component: 300  -  total flux cleaned = -0.00159086 Jy
! Component: 350  -  total flux cleaned = -0.00184735 Jy
! Component: 400  -  total flux cleaned = -0.00206672 Jy
! Component: 450  -  total flux cleaned = -0.00228134 Jy
! Component: 500  -  total flux cleaned = -0.00249237 Jy
! Component: 550  -  total flux cleaned = -0.00275798 Jy
! Component: 600  -  total flux cleaned = -0.00293171 Jy
! Component: 650  -  total flux cleaned = -0.00307367 Jy
! Component: 700  -  total flux cleaned = -0.00318592 Jy
! Component: 750  -  total flux cleaned = -0.00337859 Jy
! Component: 800  -  total flux cleaned = -0.00354112 Jy
! Component: 850  -  total flux cleaned = -0.00370119 Jy
! Component: 900  -  total flux cleaned = -0.00388459 Jy
! Component: 950  -  total flux cleaned = -0.00406539 Jy
! Component: 1000  -  total flux cleaned = -0.00424344 Jy
! Component: 1050  -  total flux cleaned = -0.0043683 Jy
! Component: 1100  -  total flux cleaned = -0.00441761 Jy
! Component: 1150  -  total flux cleaned = -0.00446621 Jy
! Component: 1200  -  total flux cleaned = -0.00451417 Jy
! Component: 1250  -  total flux cleaned = -0.00458538 Jy
! Component: 1300  -  total flux cleaned = -0.00456201 Jy
! Component: 1350  -  total flux cleaned = -0.00456198 Jy
! Component: 1400  -  total flux cleaned = -0.00456215 Jy
! Component: 1450  -  total flux cleaned = -0.00463019 Jy
! Component: 1500  -  total flux cleaned = -0.00463011 Jy
! Component: 1550  -  total flux cleaned = -0.00463023 Jy
! Component: 1600  -  total flux cleaned = -0.00465211 Jy
! Component: 1650  -  total flux cleaned = -0.00467374 Jy
! Component: 1700  -  total flux cleaned = -0.00475905 Jy
! Component: 1750  -  total flux cleaned = -0.00473761 Jy
! Component: 1800  -  total flux cleaned = -0.0048002 Jy
! Component: 1850  -  total flux cleaned = -0.00473844 Jy
! Component: 1900  -  total flux cleaned = -0.00486122 Jy
! Component: 1950  -  total flux cleaned = -0.0049019 Jy
! Component: 2000  -  total flux cleaned = -0.00500228 Jy
! Component: 2050  -  total flux cleaned = -0.00502222 Jy
! Component: 2100  -  total flux cleaned = -0.00508126 Jy
! Component: 2150  -  total flux cleaned = -0.00513987 Jy
! Component: 2200  -  total flux cleaned = -0.00519786 Jy
! Component: 2250  -  total flux cleaned = -0.00527428 Jy
! Component: 2300  -  total flux cleaned = -0.00536888 Jy
! Component: 2350  -  total flux cleaned = -0.00534985 Jy
! Component: 2400  -  total flux cleaned = -0.00542451 Jy
! Component: 2450  -  total flux cleaned = -0.00549854 Jy
! Component: 2500  -  total flux cleaned = -0.00558991 Jy
! Component: 2550  -  total flux cleaned = -0.00568035 Jy
! Component: 2600  -  total flux cleaned = -0.00569828 Jy
! Component: 2650  -  total flux cleaned = -0.00575138 Jy
! Component: 2700  -  total flux cleaned = -0.00587469 Jy
! Component: 2750  -  total flux cleaned = -0.00589225 Jy
! Component: 2800  -  total flux cleaned = -0.00590932 Jy
! Component: 2850  -  total flux cleaned = -0.005961 Jy
! Component: 2900  -  total flux cleaned = -0.00601248 Jy
! Component: 2950  -  total flux cleaned = -0.00614814 Jy
! Component: 3000  -  total flux cleaned = -0.0061143 Jy
! Component: 3050  -  total flux cleaned = -0.00608096 Jy
! Component: 3100  -  total flux cleaned = -0.00616402 Jy
! Component: 3150  -  total flux cleaned = -0.00616384 Jy
! Component: 3200  -  total flux cleaned = -0.00608202 Jy
! Component: 3250  -  total flux cleaned = -0.00611468 Jy
! Component: 3300  -  total flux cleaned = -0.00608232 Jy
! Component: 3350  -  total flux cleaned = -0.00614641 Jy
! Component: 3400  -  total flux cleaned = -0.00614627 Jy
! Component: 3450  -  total flux cleaned = -0.00608291 Jy
! Component: 3500  -  total flux cleaned = -0.00609872 Jy
! Component: 3550  -  total flux cleaned = -0.0060829 Jy
! Component: 3600  -  total flux cleaned = -0.00608285 Jy
! Component: 3650  -  total flux cleaned = -0.00611355 Jy
! Component: 3700  -  total flux cleaned = -0.00608255 Jy
! Component: 3750  -  total flux cleaned = -0.00611301 Jy
! Component: 3800  -  total flux cleaned = -0.0061431 Jy
! Component: 3850  -  total flux cleaned = -0.00609783 Jy
! Component: 3900  -  total flux cleaned = -0.00615785 Jy
! Component: 3950  -  total flux cleaned = -0.00612804 Jy
! Component: 4000  -  total flux cleaned = -0.00614279 Jy
! Component: 4050  -  total flux cleaned = -0.00615739 Jy
! Total flux subtracted in 4096 components = -0.00618666 Jy
! Clean residual min=-0.000910 max=0.000823 Jy/beam
! Clean residual mean=0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.162866 Jy
keep
! Adding 243 model components to the UV plane model.
! The established model now contains 357 components and 0.162866 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1216-1033_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.323 x 8.32 at -2.429 degrees (North through East)
! Clean map  min=-0.0018239  max=0.14212 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1216-1033_S_map.fits
wmodel /image_prod/ug002_uva//J1216-1033_S_map.mod
! Writing 357 model components to file: /image_prod/ug002_uva//J1216-1033_S_map.mod
wobs   /image_prod/ug002_uva//J1216-1033_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1216-1033_S_uvs.fits
wwins  /image_prod/ug002_uva//J1216-1033_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1216-1033_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.142121 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000257283 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.543091 0.543091 1.08618 2.17236 4.34473 8.68946 17.3789 34.7578 69.5157
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.142 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  552.393 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1216-1033_S_dfm.log closed on Thu Mar  5 00:33:26 2020