! Started logfile: /image_prod/ug002_uva//J1216+0929_S_dfm.log on Thu Mar 5 00:33:13 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1216+0929_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1216+0929_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.751605 visibilities/baseline/integration-bin. ! Found source: J1216+0929 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4566 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1216+0929_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000282Jy sigma=8.934568 ! Fit after self-cal, rms=0.941973Jy sigma=8.459962 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=8.699 mas, bpa=-5.321 degrees ! Estimated noise=1.52241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449298 Jy ! Component: 100 - total flux cleaned = 0.0550731 Jy ! Total flux subtracted in 100 components = 0.0550731 Jy ! Clean residual min=-0.004271 max=0.004109 Jy/beam ! Clean residual mean=0.000011 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.0550731 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0550731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065463Jy sigma=0.484720 ! Fit after self-cal, rms=0.065283Jy sigma=0.484111 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=9.841 mas, bpa=-6.423 degrees ! Estimated noise=1.21279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421047 Jy ! Component: 100 - total flux cleaned = 0.00612194 Jy ! Component: 150 - total flux cleaned = 0.00698585 Jy ! Component: 200 - total flux cleaned = 0.00708263 Jy ! Total flux subtracted in 200 components = 0.00708263 Jy ! Clean residual min=-0.004060 max=0.003561 Jy/beam ! Clean residual mean=0.000005 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.0621557 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.0621557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064917Jy sigma=0.482260 ! Fit after self-cal, rms=0.064916Jy sigma=0.482209 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 9.841 at -6.423 degrees (North through East) ! Clean map min=-0.0039777 max=0.059 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.15 HN 0.99 KP 1.09 ! LA 1.09 MK 1.22 NL 1.03 OV 0.61 ! PT 1.13 SC 1.14 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.25 HN 0.98 KP 0.98 ! LA 1.02 MK 1.02 NL 0.97 OV 0.94 ! PT 1.10 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.17 HN 1.05 KP 1.07 ! LA 1.13 MK 0.93 NL 0.90 OV 0.66 ! PT 1.09 SC 0.97 ! ! ! Fit before self-cal, rms=0.064916Jy sigma=0.482209 ! Fit after self-cal, rms=0.059840Jy sigma=0.466419 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.814 mas, bmaj=9.873 mas, bpa=-6.161 degrees ! Estimated noise=1.21153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317499 Jy ! Component: 100 - total flux cleaned = -0.000383912 Jy ! Component: 150 - total flux cleaned = -0.000418827 Jy ! Component: 200 - total flux cleaned = -0.000434698 Jy ! Total flux subtracted in 200 components = -0.000434698 Jy ! Clean residual min=-0.002334 max=0.002584 Jy/beam ! Clean residual mean=0.000001 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.061721 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.061721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059826Jy sigma=0.466287 ! Fit after self-cal, rms=0.060195Jy sigma=0.464597 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060195Jy sigma=0.464597 ! Fit after self-cal, rms=0.059816Jy sigma=0.460735 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=9.866 mas, bpa=-6.021 degrees ! Estimated noise=1.21588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106796 Jy ! Component: 100 - total flux cleaned = -0.000130144 Jy ! Component: 150 - total flux cleaned = -0.000146708 Jy ! Component: 200 - total flux cleaned = -0.00013163 Jy ! Total flux subtracted in 200 components = -0.00013163 Jy ! Clean residual min=-0.001993 max=0.002108 Jy/beam ! Clean residual mean=-0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0615894 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0615894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059799Jy sigma=0.460654 ! Fit after self-cal, rms=0.059995Jy sigma=0.460411 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.0761e-06 Jy ! Component: 100 - total flux cleaned = 4.08956e-05 Jy ! Component: 150 - total flux cleaned = 5.65127e-05 Jy ! Component: 200 - total flux cleaned = 7.01849e-05 Jy ! Total flux subtracted in 200 components = 7.01849e-05 Jy ! Clean residual min=-0.002002 max=0.002055 Jy/beam ! Clean residual mean=-0.000003 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0616596 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.0616596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059983Jy sigma=0.460370 ! Fit after self-cal, rms=0.059987Jy sigma=0.460358 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059987Jy sigma=0.460358 ! Fit after self-cal, rms=0.060401Jy sigma=0.460234 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=9.826 mas, bpa=-5.844 degrees ! Estimated noise=1.21683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170417 Jy ! Component: 100 - total flux cleaned = 0.0001394 Jy ! Component: 150 - total flux cleaned = 0.000139282 Jy ! Component: 200 - total flux cleaned = 0.000139223 Jy ! Total flux subtracted in 200 components = 0.000139223 Jy ! Clean residual min=-0.001993 max=0.002084 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0617988 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.0617988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060389Jy sigma=0.460189 ! Fit after self-cal, rms=0.060443Jy sigma=0.460166 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.61833e-05 Jy ! Component: 100 - total flux cleaned = -5.38117e-06 Jy ! Component: 150 - total flux cleaned = 4.95184e-06 Jy ! Component: 200 - total flux cleaned = 1.47954e-05 Jy ! Total flux subtracted in 200 components = 1.47954e-05 Jy ! Clean residual min=-0.002009 max=0.002054 Jy/beam ! Clean residual mean=-0.000004 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0618136 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.0618136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060435Jy sigma=0.460140 ! Fit after self-cal, rms=0.060438Jy sigma=0.460130 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060438Jy sigma=0.460130 ! Fit after self-cal, rms=0.060495Jy sigma=0.460117 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.752 mas, bmaj=12.91 mas, bpa=-10.09 degrees ! Estimated noise=1.38266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434492 Jy ! Component: 100 - total flux cleaned = 0.000424739 Jy ! Component: 150 - total flux cleaned = 0.000441086 Jy ! Component: 200 - total flux cleaned = 0.000462166 Jy ! Total flux subtracted in 200 components = 0.000462166 Jy ! Clean residual min=-0.002310 max=0.001817 Jy/beam ! Clean residual mean=-0.000007 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0622757 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.0622757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060491Jy sigma=0.460108 ! Fit after self-cal, rms=0.060508Jy sigma=0.460091 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.45071e-05 Jy ! Component: 100 - total flux cleaned = 4.94145e-05 Jy ! Component: 150 - total flux cleaned = 4.95038e-05 Jy ! Component: 200 - total flux cleaned = 5.41311e-05 Jy ! Total flux subtracted in 200 components = 5.41311e-05 Jy ! Clean residual min=-0.002303 max=0.001818 Jy/beam ! Clean residual mean=-0.000007 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0623299 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.0623299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060508Jy sigma=0.460096 ! Fit after self-cal, rms=0.060511Jy sigma=0.460087 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=9.796 mas, bpa=-5.686 degrees ! Estimated noise=1.21831 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.823 x 9.796 at -5.686 degrees (North through East) ! Clean map min=-0.0019306 max=0.058638 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=8.709 mas, bpa=-4.541 degrees ! Estimated noise=1.5308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449163 Jy ! Component: 100 - total flux cleaned = 0.0553923 Jy ! Component: 150 - total flux cleaned = 0.0589868 Jy ! Component: 200 - total flux cleaned = 0.0608276 Jy ! Total flux subtracted in 200 components = 0.0608276 Jy ! Clean residual min=-0.002503 max=0.002634 Jy/beam ! Clean residual mean=-0.000000 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0608276 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0608276 Jy ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=9.796 mas, bpa=-5.686 degrees ! Estimated noise=1.21831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115247 Jy ! Component: 100 - total flux cleaned = 0.00123112 Jy ! Component: 150 - total flux cleaned = 0.00129442 Jy ! Component: 200 - total flux cleaned = 0.0012661 Jy ! Total flux subtracted in 200 components = 0.0012661 Jy ! Clean residual min=-0.002053 max=0.002062 Jy/beam ! Clean residual mean=-0.000004 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0620937 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0620937 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.752 mas, bmaj=12.91 mas, bpa=-10.09 degrees ! Estimated noise=1.38266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356475 Jy ! Component: 100 - total flux cleaned = 0.000356387 Jy ! Component: 150 - total flux cleaned = 0.00035655 Jy ! Component: 200 - total flux cleaned = 0.000345696 Jy ! Total flux subtracted in 200 components = 0.000345696 Jy ! Clean residual min=-0.002325 max=0.001887 Jy/beam ! Clean residual mean=-0.000007 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0624394 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.0531e-05 Jy ! Component: 100 - total flux cleaned = -1.04457e-05 Jy ! Component: 150 - total flux cleaned = -3.01598e-05 Jy ! Component: 200 - total flux cleaned = -3.0263e-05 Jy ! Total flux subtracted in 200 components = -3.0263e-05 Jy ! Clean residual min=-0.002320 max=0.001878 Jy/beam ! Clean residual mean=-0.000007 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0624092 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.0624092 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=9.796 mas, bpa=-5.686 degrees ! Estimated noise=1.21831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.83769e-05 Jy ! Component: 100 - total flux cleaned = -8.75613e-06 Jy ! Component: 150 - total flux cleaned = -2.67789e-05 Jy ! Component: 200 - total flux cleaned = -2.65769e-05 Jy ! Total flux subtracted in 200 components = -2.65769e-05 Jy ! Clean residual min=-0.001983 max=0.002017 Jy/beam ! Clean residual mean=-0.000004 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0623826 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.0623826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060516Jy sigma=0.460153 ! Fit after self-cal, rms=0.060517Jy sigma=0.460113 wmodel J1216+0929_S_map.mod ! Writing 56 model components to file: J1216+0929_S_map.mod wobs J1216+0929_S_uvs.fits ! Writing UV FITS file: J1216+0929_S_uvs.fits wwins J1216+0929_S_map.win ! wwins: Wrote 1 windows to J1216+0929_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002304 Jy ! Component: 100 - total flux cleaned = 0.000159937 Jy ! Component: 150 - total flux cleaned = 2.7306e-05 Jy ! Component: 200 - total flux cleaned = -0.000131222 Jy ! Component: 250 - total flux cleaned = -0.00028449 Jy ! Component: 300 - total flux cleaned = -0.000433192 Jy ! Component: 350 - total flux cleaned = -0.000548391 Jy ! Component: 400 - total flux cleaned = -0.000688415 Jy ! Component: 450 - total flux cleaned = -0.000852136 Jy ! Component: 500 - total flux cleaned = -0.00101111 Jy ! Component: 550 - total flux cleaned = -0.00114107 Jy ! Component: 600 - total flux cleaned = -0.00131925 Jy ! Component: 650 - total flux cleaned = -0.00144336 Jy ! Component: 700 - total flux cleaned = -0.00149187 Jy ! Component: 750 - total flux cleaned = -0.00149215 Jy ! Component: 800 - total flux cleaned = -0.00151558 Jy ! Component: 850 - total flux cleaned = -0.00156229 Jy ! Component: 900 - total flux cleaned = -0.00156229 Jy ! Component: 950 - total flux cleaned = -0.00154032 Jy ! Component: 1000 - total flux cleaned = -0.00158374 Jy ! Component: 1050 - total flux cleaned = -0.00145444 Jy ! Component: 1100 - total flux cleaned = -0.00147627 Jy ! Component: 1150 - total flux cleaned = -0.00143466 Jy ! Component: 1200 - total flux cleaned = -0.00141445 Jy ! Component: 1250 - total flux cleaned = -0.00139416 Jy ! Component: 1300 - total flux cleaned = -0.00137428 Jy ! Component: 1350 - total flux cleaned = -0.0013348 Jy ! Component: 1400 - total flux cleaned = -0.00131542 Jy ! Component: 1450 - total flux cleaned = -0.00141204 Jy ! Component: 1500 - total flux cleaned = -0.00139328 Jy ! Component: 1550 - total flux cleaned = -0.0013559 Jy ! Component: 1600 - total flux cleaned = -0.00137502 Jy ! Component: 1650 - total flux cleaned = -0.00143057 Jy ! Component: 1700 - total flux cleaned = -0.00148533 Jy ! Component: 1750 - total flux cleaned = -0.00144928 Jy ! Component: 1800 - total flux cleaned = -0.00144933 Jy ! Component: 1850 - total flux cleaned = -0.00141401 Jy ! Component: 1900 - total flux cleaned = -0.00148342 Jy ! Component: 1950 - total flux cleaned = -0.00148371 Jy ! Component: 2000 - total flux cleaned = -0.00151779 Jy ! Component: 2050 - total flux cleaned = -0.00155118 Jy ! Component: 2100 - total flux cleaned = -0.00158451 Jy ! Component: 2150 - total flux cleaned = -0.00161747 Jy ! Component: 2200 - total flux cleaned = -0.0016175 Jy ! Component: 2250 - total flux cleaned = -0.00168196 Jy ! Component: 2300 - total flux cleaned = -0.00161842 Jy ! Component: 2350 - total flux cleaned = -0.00163438 Jy ! Component: 2400 - total flux cleaned = -0.00163437 Jy ! Component: 2450 - total flux cleaned = -0.00164966 Jy ! Component: 2500 - total flux cleaned = -0.00164995 Jy ! Component: 2550 - total flux cleaned = -0.00163477 Jy ! Component: 2600 - total flux cleaned = -0.00166508 Jy ! Component: 2650 - total flux cleaned = -0.00163544 Jy ! Component: 2700 - total flux cleaned = -0.00165015 Jy ! Component: 2750 - total flux cleaned = -0.00160631 Jy ! Component: 2800 - total flux cleaned = -0.0015482 Jy ! Component: 2850 - total flux cleaned = -0.00154804 Jy ! Component: 2900 - total flux cleaned = -0.00156229 Jy ! Component: 2950 - total flux cleaned = -0.00149172 Jy ! Component: 3000 - total flux cleaned = -0.00143572 Jy ! Component: 3050 - total flux cleaned = -0.00144974 Jy ! Component: 3100 - total flux cleaned = -0.00139479 Jy ! Component: 3150 - total flux cleaned = -0.00136761 Jy ! Component: 3200 - total flux cleaned = -0.0013678 Jy ! Component: 3250 - total flux cleaned = -0.00128747 Jy ! Component: 3300 - total flux cleaned = -0.00130071 Jy ! Component: 3350 - total flux cleaned = -0.00128737 Jy ! Component: 3400 - total flux cleaned = -0.00123492 Jy ! Component: 3450 - total flux cleaned = -0.0011958 Jy ! Component: 3500 - total flux cleaned = -0.00117016 Jy ! Component: 3550 - total flux cleaned = -0.00113172 Jy ! Component: 3600 - total flux cleaned = -0.00105542 Jy ! Component: 3650 - total flux cleaned = -0.00101762 Jy ! Component: 3700 - total flux cleaned = -0.000992705 Jy ! Component: 3750 - total flux cleaned = -0.000980287 Jy ! Component: 3800 - total flux cleaned = -0.000881581 Jy ! Component: 3850 - total flux cleaned = -0.000844723 Jy ! Component: 3900 - total flux cleaned = -0.000796047 Jy ! Component: 3950 - total flux cleaned = -0.000723366 Jy ! Component: 4000 - total flux cleaned = -0.00071142 Jy ! Component: 4050 - total flux cleaned = -0.00063991 Jy ! Total flux subtracted in 4096 components = -0.000556882 Jy ! Clean residual min=-0.000707 max=0.000755 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0618257 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 336 components and 0.0618257 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1216+0929_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.823 x 9.796 at -5.686 degrees (North through East) ! Clean map min=-0.0014377 max=0.058229 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1216+0929_S_map.fits wmodel /image_prod/ug002_uva//J1216+0929_S_map.mod ! Writing 336 model components to file: /image_prod/ug002_uva//J1216+0929_S_map.mod wobs /image_prod/ug002_uva//J1216+0929_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1216+0929_S_uvs.fits wwins /image_prod/ug002_uva//J1216+0929_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1216+0929_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.058229 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214347 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10433 1.10433 2.20867 4.41734 8.83468 17.6694 35.3387 70.6774 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.058 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 271.656 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1216+0929_S_dfm.log closed on Thu Mar 5 00:33:17 2020