! Started logfile: /image_prod/ug002_uva//J1215-1731_X_g_dfm.log on Thu Mar 5 00:33:06 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1215-1731_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1215-1731_X_g_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905556 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 3912 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1215-1731_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.758079Jy sigma=13.276016 ! Fit after self-cal, rms=0.519282Jy sigma=3.827008 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6498 mas, bmaj=1.677 mas, bpa=-11.74 degrees ! Estimated noise=1.98763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.06054 Jy ! Component: 100 - total flux cleaned = 1.30883 Jy ! Total flux subtracted in 100 components = 1.30883 Jy ! Clean residual min=-0.058784 max=0.101733 Jy/beam ! Clean residual mean=-0.000070 rms=0.014690 Jy/beam ! Combined flux in latest and established models = 1.30883 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.30883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.282974Jy sigma=2.032461 ! Fit after self-cal, rms=0.282866Jy sigma=2.031824 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119317 Jy ! Component: 100 - total flux cleaned = 0.194096 Jy ! Total flux subtracted in 100 components = 0.194096 Jy ! Clean residual min=-0.049887 max=0.064131 Jy/beam ! Clean residual mean=-0.000061 rms=0.009981 Jy/beam ! Combined flux in latest and established models = 1.50293 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 1.50293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.187134Jy sigma=1.339083 ! Fit after self-cal, rms=0.187016Jy sigma=1.337999 ! Inverting map ! Added new window around map position (2.2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0634079 Jy ! Component: 100 - total flux cleaned = 0.108503 Jy ! Total flux subtracted in 100 components = 0.108503 Jy ! Clean residual min=-0.044268 max=0.042302 Jy/beam ! Clean residual mean=-0.000054 rms=0.007897 Jy/beam ! Combined flux in latest and established models = 1.61143 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 1.61143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148899Jy sigma=1.069520 ! Fit after self-cal, rms=0.148090Jy sigma=1.064088 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8101 mas, bmaj=1.998 mas, bpa=-10.16 degrees ! Estimated noise=1.57314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0477826 Jy ! Component: 100 - total flux cleaned = 0.0779231 Jy ! Component: 150 - total flux cleaned = 0.0982429 Jy ! Component: 200 - total flux cleaned = 0.10702 Jy ! Total flux subtracted in 200 components = 0.10702 Jy ! Clean residual min=-0.042428 max=0.038871 Jy/beam ! Clean residual mean=-0.000102 rms=0.008706 Jy/beam ! Combined flux in latest and established models = 1.71845 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 1.71845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127092Jy sigma=0.930336 ! Fit after self-cal, rms=0.126469Jy sigma=0.925126 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8101 x 1.998 at -10.16 degrees (North through East) ! Clean map min=-0.038929 max=1.4357 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.94 KP 1.06 ! LA 1.07 MK 1.01 NL 1.02 OV 0.95 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 0.94 KP 1.06 ! LA 1.06 MK 1.02 NL 1.02 OV 0.94 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.95 KP 1.06 ! LA 1.06 MK 1.01 NL 1.01 OV 0.94 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.94 KP 1.06 ! LA 1.07 MK 1.02 NL 1.01 OV 0.95 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.95 KP 1.05 ! LA 1.08 MK 1.02 NL 1.01 OV 0.94 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 0.93 KP 1.05 ! LA 1.08 MK 1.01 NL 1.00 OV 0.94 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.95 KP 1.06 ! LA 1.07 MK 1.00 NL 1.00 OV 0.94 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.93 KP 1.06 ! LA 1.07 MK 1.01 NL 1.01 OV 0.94 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.94 KP 1.05 ! LA 1.06 MK 1.00 NL 1.00 OV 0.95 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.93 KP 1.05 ! LA 1.06 MK 1.00 NL 1.00 OV 0.94 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.94 KP 1.06 ! LA 1.06 MK 1.06 NL 1.00 OV 0.93 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 0.92 KP 1.05 ! LA 1.07 MK 1.13 NL 1.01 OV 0.95 ! PT 0.91 SC 1.00 ! ! ! Fit before self-cal, rms=0.126469Jy sigma=0.925126 ! Fit after self-cal, rms=0.068440Jy sigma=0.505474 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8103 mas, bmaj=2.006 mas, bpa=-10 degrees ! Estimated noise=1.56489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115881 Jy ! Component: 100 - total flux cleaned = 0.0110925 Jy ! Component: 150 - total flux cleaned = 0.0110849 Jy ! Component: 200 - total flux cleaned = 0.0110738 Jy ! Total flux subtracted in 200 components = 0.0110738 Jy ! Clean residual min=-0.011240 max=0.012234 Jy/beam ! Clean residual mean=0.000004 rms=0.002345 Jy/beam ! Combined flux in latest and established models = 1.72953 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 1.72953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062951Jy sigma=0.461704 ! Fit after self-cal, rms=0.062708Jy sigma=0.459398 ! Inverting map ! Added new window around map position (9.8, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113927 Jy ! Component: 100 - total flux cleaned = 0.0179425 Jy ! Component: 150 - total flux cleaned = 0.0213311 Jy ! Component: 200 - total flux cleaned = 0.0236756 Jy ! Total flux subtracted in 200 components = 0.0236756 Jy ! Clean residual min=-0.009257 max=0.010061 Jy/beam ! Clean residual mean=0.000005 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 1.7532 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 1.7532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059731Jy sigma=0.438666 ! Fit after self-cal, rms=0.059674Jy sigma=0.438228 ! Inverting map ! Added new window around map position (-5, 16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354569 Jy ! Component: 100 - total flux cleaned = 0.00644121 Jy ! Component: 150 - total flux cleaned = 0.00981436 Jy ! Component: 200 - total flux cleaned = 0.0129328 Jy ! Total flux subtracted in 200 components = 0.0129328 Jy ! Clean residual min=-0.006362 max=0.005752 Jy/beam ! Clean residual mean=0.000005 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 1.76613 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 94 components and 1.76614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057608Jy sigma=0.422518 ! Fit after self-cal, rms=0.057512Jy sigma=0.421739 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057512Jy sigma=0.421739 ! Fit after self-cal, rms=0.056762Jy sigma=0.417272 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8104 mas, bmaj=2.007 mas, bpa=-10.01 degrees ! Estimated noise=1.56334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111962 Jy ! Component: 100 - total flux cleaned = 0.0036923 Jy ! Component: 150 - total flux cleaned = 0.00541579 Jy ! Component: 200 - total flux cleaned = 0.00625435 Jy ! Total flux subtracted in 200 components = 0.00625435 Jy ! Clean residual min=-0.005121 max=0.005010 Jy/beam ! Clean residual mean=0.000006 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 1.77239 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 1.77239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056043Jy sigma=0.411969 ! Fit after self-cal, rms=0.056026Jy sigma=0.411831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571511 Jy ! Component: 100 - total flux cleaned = 0.00132239 Jy ! Component: 150 - total flux cleaned = 0.00202704 Jy ! Component: 200 - total flux cleaned = 0.00259805 Jy ! Total flux subtracted in 200 components = 0.00259805 Jy ! Clean residual min=-0.004630 max=0.004517 Jy/beam ! Clean residual mean=0.000006 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 1.77499 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 110 components and 1.77499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055682Jy sigma=0.409287 ! Fit after self-cal, rms=0.055672Jy sigma=0.409235 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055672Jy sigma=0.409235 ! Fit after self-cal, rms=0.055608Jy sigma=0.408938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8103 mas, bmaj=2.007 mas, bpa=-10.02 degrees ! Estimated noise=1.56296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483428 Jy ! Component: 100 - total flux cleaned = 0.00112129 Jy ! Component: 150 - total flux cleaned = 0.00163035 Jy ! Component: 200 - total flux cleaned = 0.00203029 Jy ! Total flux subtracted in 200 components = 0.00203029 Jy ! Clean residual min=-0.004253 max=0.004237 Jy/beam ! Clean residual mean=0.000006 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 1.77702 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 117 components and 1.77702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055351Jy sigma=0.407115 ! Fit after self-cal, rms=0.055344Jy sigma=0.407073 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022097 Jy ! Component: 100 - total flux cleaned = 0.00051544 Jy ! Component: 150 - total flux cleaned = 0.00107291 Jy ! Component: 200 - total flux cleaned = 0.0015989 Jy ! Total flux subtracted in 200 components = 0.0015989 Jy ! Clean residual min=-0.003972 max=0.003896 Jy/beam ! Clean residual mean=0.000006 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 1.77862 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 1.77862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055179Jy sigma=0.405878 ! Fit after self-cal, rms=0.055172Jy sigma=0.405850 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055172Jy sigma=0.405850 ! Fit after self-cal, rms=0.055157Jy sigma=0.405758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.031 mas, bmaj=3.919 mas, bpa=-9.29 degrees ! Estimated noise=2.26474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311805 Jy ! Component: 100 - total flux cleaned = 0.00479758 Jy ! Component: 150 - total flux cleaned = 0.00516322 Jy ! Component: 200 - total flux cleaned = 0.00535743 Jy ! Total flux subtracted in 200 components = 0.00535743 Jy ! Clean residual min=-0.003836 max=0.004481 Jy/beam ! Clean residual mean=0.000016 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 1.78397 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 135 components and 1.78397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055052Jy sigma=0.405548 ! Fit after self-cal, rms=0.055037Jy sigma=0.405501 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047639 Jy ! Component: 100 - total flux cleaned = 0.0005831 Jy ! Component: 150 - total flux cleaned = 0.00068163 Jy ! Component: 200 - total flux cleaned = 0.000772579 Jy ! Total flux subtracted in 200 components = 0.000772579 Jy ! Clean residual min=-0.003675 max=0.004159 Jy/beam ! Clean residual mean=0.000016 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 1.78475 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 139 components and 1.78475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055014Jy sigma=0.405442 ! Fit after self-cal, rms=0.055011Jy sigma=0.405427 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8101 mas, bmaj=2.007 mas, bpa=-10.04 degrees ! Estimated noise=1.56274 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8101 x 2.007 at -10.04 degrees (North through East) ! Clean map min=-0.011012 max=1.4285 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055011Jy sigma=0.405427 ! Fit after self-cal, rms=0.051786Jy sigma=0.374551 ! Inverting map and beam ! Estimated beam: bmin=0.8101 mas, bmaj=2.007 mas, bpa=-10.05 degrees ! Estimated noise=1.56306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000840054 Jy ! Component: 100 - total flux cleaned = -0.000625857 Jy ! Component: 150 - total flux cleaned = -0.000439714 Jy ! Component: 200 - total flux cleaned = -0.000156644 Jy ! Total flux subtracted in 200 components = -0.000156644 Jy ! Clean residual min=-0.003461 max=0.003092 Jy/beam ! Clean residual mean=0.000005 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 1.78459 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 152 components and 1.78459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051640Jy sigma=0.373208 ! Fit after self-cal, rms=0.051636Jy sigma=0.373169 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.08954e-05 Jy ! Component: 100 - total flux cleaned = 0.000173826 Jy ! Component: 150 - total flux cleaned = 0.000312122 Jy ! Component: 200 - total flux cleaned = 0.000310554 Jy ! Total flux subtracted in 200 components = 0.000310554 Jy ! Clean residual min=-0.003287 max=0.003096 Jy/beam ! Clean residual mean=0.000005 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 1.7849 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 158 components and 1.7849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051554Jy sigma=0.372535 ! Fit after self-cal, rms=0.051555Jy sigma=0.372521 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051555Jy sigma=0.372521 ! Fit after self-cal, rms=0.051544Jy sigma=0.372459 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6511 mas, bmaj=1.686 mas, bpa=-11.7 degrees ! Estimated noise=1.97748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05514 Jy ! Component: 100 - total flux cleaned = 1.30088 Jy ! Component: 150 - total flux cleaned = 1.41584 Jy ! Component: 200 - total flux cleaned = 1.49106 Jy ! Total flux subtracted in 200 components = 1.49106 Jy ! Clean residual min=-0.023492 max=0.046553 Jy/beam ! Clean residual mean=-0.000015 rms=0.006638 Jy/beam ! Combined flux in latest and established models = 1.49106 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.49106 Jy ! Inverting map and beam ! Estimated beam: bmin=0.81 mas, bmaj=2.007 mas, bpa=-10.06 degrees ! Estimated noise=1.56312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0851936 Jy ! Component: 100 - total flux cleaned = 0.138048 Jy ! Component: 150 - total flux cleaned = 0.172686 Jy ! Component: 200 - total flux cleaned = 0.196277 Jy ! Total flux subtracted in 200 components = 0.196277 Jy ! Clean residual min=-0.011862 max=0.015297 Jy/beam ! Clean residual mean=0.000007 rms=0.003144 Jy/beam ! Combined flux in latest and established models = 1.68734 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 44 components and 1.68734 Jy ! Inverting map ! Added new window around map position (10.4, -16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171035 Jy ! Component: 100 - total flux cleaned = 0.0299199 Jy ! Component: 150 - total flux cleaned = 0.0405241 Jy ! Component: 200 - total flux cleaned = 0.0494983 Jy ! Total flux subtracted in 200 components = 0.0494983 Jy ! Clean residual min=-0.008209 max=0.008109 Jy/beam ! Clean residual mean=0.000007 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 1.73684 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 1.73684 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.03 mas, bmaj=3.919 mas, bpa=-9.3 degrees ! Estimated noise=2.26566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129117 Jy ! Component: 100 - total flux cleaned = 0.0215847 Jy ! Component: 150 - total flux cleaned = 0.027912 Jy ! Component: 200 - total flux cleaned = 0.0328287 Jy ! Total flux subtracted in 200 components = 0.0328287 Jy ! Clean residual min=-0.005469 max=0.005400 Jy/beam ! Clean residual mean=0.000016 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 1.76967 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396625 Jy ! Component: 100 - total flux cleaned = 0.00672992 Jy ! Component: 150 - total flux cleaned = 0.00831054 Jy ! Component: 200 - total flux cleaned = 0.00931173 Jy ! Total flux subtracted in 200 components = 0.00931173 Jy ! Clean residual min=-0.004499 max=0.004889 Jy/beam ! Clean residual mean=0.000017 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 1.77898 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 97 components and 1.77898 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.81 mas, bmaj=2.007 mas, bpa=-10.06 degrees ! Estimated noise=1.56312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014859 Jy ! Component: 100 - total flux cleaned = -0.00127283 Jy ! Component: 150 - total flux cleaned = -0.00110054 Jy ! Component: 200 - total flux cleaned = -0.00110344 Jy ! Total flux subtracted in 200 components = -0.00110344 Jy ! Clean residual min=-0.004999 max=0.004566 Jy/beam ! Clean residual mean=0.000007 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 1.77787 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 111 components and 1.77787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052572Jy sigma=0.382357 ! Fit after self-cal, rms=0.052495Jy sigma=0.381349 wmodel J1215-1731_X_g_map.mod ! Writing 111 model components to file: J1215-1731_X_g_map.mod wobs J1215-1731_X_g_uvs.fits ! Writing UV FITS file: J1215-1731_X_g_uvs.fits wwins J1215-1731_X_g_map.win ! wwins: Wrote 6 windows to J1215-1731_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000907487 Jy ! Component: 100 - total flux cleaned = -0.00144997 Jy ! Component: 150 - total flux cleaned = -0.00216683 Jy ! Component: 200 - total flux cleaned = -0.00297277 Jy ! Component: 250 - total flux cleaned = -0.00316456 Jy ! Component: 300 - total flux cleaned = -0.00328728 Jy ! Component: 350 - total flux cleaned = -0.00340395 Jy ! Component: 400 - total flux cleaned = -0.00323675 Jy ! Component: 450 - total flux cleaned = -0.00296733 Jy ! Component: 500 - total flux cleaned = -0.00265553 Jy ! Component: 550 - total flux cleaned = -0.00235573 Jy ! Component: 600 - total flux cleaned = -0.00226068 Jy ! Component: 650 - total flux cleaned = -0.00216696 Jy ! Component: 700 - total flux cleaned = -0.00193847 Jy ! Component: 750 - total flux cleaned = -0.00171695 Jy ! Component: 800 - total flux cleaned = -0.0015871 Jy ! Component: 850 - total flux cleaned = -0.00129404 Jy ! Component: 900 - total flux cleaned = -0.00105108 Jy ! Component: 950 - total flux cleaned = -0.000931736 Jy ! Component: 1000 - total flux cleaned = -0.000737959 Jy ! Component: 1050 - total flux cleaned = -0.000661355 Jy ! Component: 1100 - total flux cleaned = -0.000367432 Jy ! Component: 1150 - total flux cleaned = -0.000510674 Jy ! Component: 1200 - total flux cleaned = -0.000580325 Jy ! Component: 1250 - total flux cleaned = -0.000545477 Jy ! Component: 1300 - total flux cleaned = -0.000512039 Jy ! Component: 1350 - total flux cleaned = -0.000446826 Jy ! Component: 1400 - total flux cleaned = -0.000479795 Jy ! Component: 1450 - total flux cleaned = -0.000510663 Jy ! Component: 1500 - total flux cleaned = -0.000355441 Jy ! Component: 1550 - total flux cleaned = -0.000416977 Jy ! Component: 1600 - total flux cleaned = -0.000415975 Jy ! Component: 1650 - total flux cleaned = -0.000297496 Jy ! Component: 1700 - total flux cleaned = -0.000240244 Jy ! Component: 1750 - total flux cleaned = -0.000183206 Jy ! Component: 1800 - total flux cleaned = -0.000211504 Jy ! Component: 1850 - total flux cleaned = -1.85367e-05 Jy ! Component: 1900 - total flux cleaned = -7.30277e-05 Jy ! Component: 1950 - total flux cleaned = 6.02792e-05 Jy ! Component: 2000 - total flux cleaned = -1.91775e-05 Jy ! Component: 2050 - total flux cleaned = 5.94015e-05 Jy ! Component: 2100 - total flux cleaned = 0.000111083 Jy ! Component: 2150 - total flux cleaned = 0.000187206 Jy ! Component: 2200 - total flux cleaned = 0.000162583 Jy ! Component: 2250 - total flux cleaned = 0.000236378 Jy ! Component: 2300 - total flux cleaned = 0.000260117 Jy ! Component: 2350 - total flux cleaned = 0.000260354 Jy ! Component: 2400 - total flux cleaned = 0.000378821 Jy ! Component: 2450 - total flux cleaned = 0.000378352 Jy ! Component: 2500 - total flux cleaned = 0.000424726 Jy ! Component: 2550 - total flux cleaned = 0.000447558 Jy ! Component: 2600 - total flux cleaned = 0.000447564 Jy ! Component: 2650 - total flux cleaned = 0.000469788 Jy ! Component: 2700 - total flux cleaned = 0.000580409 Jy ! Component: 2750 - total flux cleaned = 0.000601953 Jy ! Component: 2800 - total flux cleaned = 0.000688452 Jy ! Component: 2850 - total flux cleaned = 0.000688346 Jy ! Component: 2900 - total flux cleaned = 0.000751988 Jy ! Component: 2950 - total flux cleaned = 0.000814873 Jy ! Component: 3000 - total flux cleaned = 0.000835598 Jy ! Component: 3050 - total flux cleaned = 0.000876432 Jy ! Component: 3100 - total flux cleaned = 0.000937392 Jy ! Component: 3150 - total flux cleaned = 0.000997574 Jy ! Component: 3200 - total flux cleaned = 0.00103705 Jy ! Component: 3250 - total flux cleaned = 0.00113567 Jy ! Component: 3300 - total flux cleaned = 0.00115518 Jy ! Component: 3350 - total flux cleaned = 0.00115503 Jy ! Component: 3400 - total flux cleaned = 0.00117419 Jy ! Component: 3450 - total flux cleaned = 0.00123121 Jy ! Component: 3500 - total flux cleaned = 0.00126892 Jy ! Component: 3550 - total flux cleaned = 0.00123168 Jy ! Component: 3600 - total flux cleaned = 0.00128739 Jy ! Component: 3650 - total flux cleaned = 0.00132422 Jy ! Component: 3700 - total flux cleaned = 0.00125122 Jy ! Component: 3750 - total flux cleaned = 0.00130563 Jy ! Component: 3800 - total flux cleaned = 0.0013413 Jy ! Component: 3850 - total flux cleaned = 0.00134124 Jy ! Component: 3900 - total flux cleaned = 0.00137642 Jy ! Component: 3950 - total flux cleaned = 0.00139369 Jy ! Component: 4000 - total flux cleaned = 0.00135894 Jy ! Component: 4050 - total flux cleaned = 0.0013936 Jy ! Total flux subtracted in 4096 components = 0.00139368 Jy ! Clean residual min=-0.001080 max=0.000992 Jy/beam ! Clean residual mean=0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 1.77927 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 370 components and 1.77927 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1215-1731_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.81 x 2.007 at -10.06 degrees (North through East) ! Clean map min=-0.0032894 max=1.4308 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1215-1731_X_g_map.fits wmodel /image_prod/ug002_uva//J1215-1731_X_g_map.mod ! Writing 370 model components to file: /image_prod/ug002_uva//J1215-1731_X_g_map.mod wobs /image_prod/ug002_uva//J1215-1731_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1215-1731_X_g_uvs.fits wwins /image_prod/ug002_uva//J1215-1731_X_g_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1215-1731_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.43083 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000268969 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0563943 0.0563943 0.112789 0.225577 0.451155 0.90231 1.80462 3.60924 7.21848 14.437 28.8739 57.7478 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.43 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5319.68 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1215-1731_X_g_dfm.log closed on Thu Mar 5 00:33:11 2020