! Started logfile: /image_prod/ug002_uva//J1215-1731_X_d_dfm.log on Thu Mar 5 00:32:53 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1215-1731_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1215-1731_X_d_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.800347 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5532 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1215-1731_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.594282Jy sigma=7.856560 ! Fit after self-cal, rms=0.329968Jy sigma=1.530285 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6408 mas, bmaj=1.539 mas, bpa=-2.627 degrees ! Estimated noise=2.91768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.850384 Jy ! Component: 100 - total flux cleaned = 1.05931 Jy ! Total flux subtracted in 100 components = 1.05931 Jy ! Clean residual min=-0.064973 max=0.088287 Jy/beam ! Clean residual mean=-0.000038 rms=0.011769 Jy/beam ! Combined flux in latest and established models = 1.05931 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.05931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.294706Jy sigma=1.352806 ! Fit after self-cal, rms=0.294572Jy sigma=1.352006 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101019 Jy ! Component: 100 - total flux cleaned = 0.159723 Jy ! Total flux subtracted in 100 components = 0.159723 Jy ! Clean residual min=-0.049697 max=0.061266 Jy/beam ! Clean residual mean=0.000017 rms=0.009058 Jy/beam ! Combined flux in latest and established models = 1.21904 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 1.21904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.221052Jy sigma=1.003571 ! Fit after self-cal, rms=0.220952Jy sigma=1.003056 ! Inverting map ! Added new window around map position (2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0546964 Jy ! Component: 100 - total flux cleaned = 0.087684 Jy ! Total flux subtracted in 100 components = 0.087684 Jy ! Clean residual min=-0.046184 max=0.047098 Jy/beam ! Clean residual mean=0.000030 rms=0.008041 Jy/beam ! Combined flux in latest and established models = 1.30672 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 1.30672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194160Jy sigma=0.882243 ! Fit after self-cal, rms=0.193384Jy sigma=0.878760 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8124 mas, bmaj=1.905 mas, bpa=-3.448 degrees ! Estimated noise=1.96646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557612 Jy ! Component: 100 - total flux cleaned = 0.0912492 Jy ! Component: 150 - total flux cleaned = 0.114978 Jy ! Component: 200 - total flux cleaned = 0.130941 Jy ! Total flux subtracted in 200 components = 0.130941 Jy ! Clean residual min=-0.047440 max=0.043226 Jy/beam ! Clean residual mean=0.000116 rms=0.010226 Jy/beam ! Combined flux in latest and established models = 1.43766 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 1.43766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169330Jy sigma=0.794899 ! Fit after self-cal, rms=0.167792Jy sigma=0.786331 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8124 x 1.905 at -3.448 degrees (North through East) ! Clean map min=-0.04313 max=1.1474 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 1.06 KP 1.10 ! LA 1.06 MK 1.02 OV 0.89 PT 0.89 ! SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.06 KP 1.09 ! LA 1.07 MK 1.01 OV 0.92 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 1.09 KP 1.09 ! LA 1.06 MK 1.03 OV 0.90 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.06 KP 1.08 ! LA 1.06 MK 1.00 OV 0.90 PT 0.89 ! SC 1.05 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.05 KP 1.07 ! LA 1.05 MK 1.03 OV 0.90 PT 0.88 ! SC 1.00 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 1.06 KP 1.09 ! LA 1.04 MK 1.02 OV 0.89 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 1.03 KP 1.07 ! LA 1.09 MK 1.04 OV 0.90 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 1.08 KP 1.08 ! LA 1.04 MK 1.02 OV 0.90 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.09 KP 1.08 ! LA 1.03 MK 0.99 OV 0.91 PT 0.89 ! SC 1.03 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.07 KP 1.06 ! LA 1.04 MK 1.03 OV 0.91 PT 0.87 ! SC 1.05 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 1.06 KP 1.08 ! LA 1.07 MK 1.03 OV 0.89 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.08 KP 1.08 ! LA 1.05 MK 1.04 OV 0.88 PT 0.87 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.167792Jy sigma=0.786331 ! Fit after self-cal, rms=0.115876Jy sigma=0.534368 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8236 mas, bmaj=1.91 mas, bpa=-2.958 degrees ! Estimated noise=1.97408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195467 Jy ! Component: 100 - total flux cleaned = 0.0203112 Jy ! Component: 150 - total flux cleaned = 0.0195965 Jy ! Component: 200 - total flux cleaned = 0.019772 Jy ! Total flux subtracted in 200 components = 0.019772 Jy ! Clean residual min=-0.023541 max=0.025374 Jy/beam ! Clean residual mean=0.000056 rms=0.005583 Jy/beam ! Combined flux in latest and established models = 1.45744 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 1.45744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112174Jy sigma=0.518767 ! Fit after self-cal, rms=0.111663Jy sigma=0.515972 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111663Jy sigma=0.515972 ! Fit after self-cal, rms=0.077469Jy sigma=0.355010 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.823 mas, bmaj=1.906 mas, bpa=-3.035 degrees ! Estimated noise=1.97557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00630334 Jy ! Component: 100 - total flux cleaned = 0.00610404 Jy ! Component: 150 - total flux cleaned = 0.00626693 Jy ! Component: 200 - total flux cleaned = 0.0065632 Jy ! Total flux subtracted in 200 components = 0.0065632 Jy ! Clean residual min=-0.008040 max=0.012632 Jy/beam ! Clean residual mean=0.000005 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 1.464 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 1.464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076204Jy sigma=0.348876 ! Fit after self-cal, rms=0.076173Jy sigma=0.348552 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.4, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115064 Jy ! Component: 100 - total flux cleaned = 0.0175179 Jy ! Component: 150 - total flux cleaned = 0.0218902 Jy ! Component: 200 - total flux cleaned = 0.024581 Jy ! Total flux subtracted in 200 components = 0.024581 Jy ! Clean residual min=-0.007161 max=0.008826 Jy/beam ! Clean residual mean=0.000006 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 1.48858 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 1.48858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074114Jy sigma=0.339352 ! Fit after self-cal, rms=0.074028Jy sigma=0.338974 ! Inverting map ! Added new window around map position (3.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00723063 Jy ! Component: 100 - total flux cleaned = 0.00937467 Jy ! Component: 150 - total flux cleaned = 0.0108315 Jy ! Component: 200 - total flux cleaned = 0.0121434 Jy ! Total flux subtracted in 200 components = 0.0121434 Jy ! Clean residual min=-0.007283 max=0.007297 Jy/beam ! Clean residual mean=0.000002 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 1.50072 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 1.50072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073128Jy sigma=0.334726 ! Fit after self-cal, rms=0.073106Jy sigma=0.334551 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073106Jy sigma=0.334551 ! Fit after self-cal, rms=0.072915Jy sigma=0.333077 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8229 mas, bmaj=1.904 mas, bpa=-2.962 degrees ! Estimated noise=1.97259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194373 Jy ! Component: 100 - total flux cleaned = 0.00327413 Jy ! Component: 150 - total flux cleaned = 0.00448235 Jy ! Component: 200 - total flux cleaned = 0.00549355 Jy ! Total flux subtracted in 200 components = 0.00549355 Jy ! Clean residual min=-0.006686 max=0.007111 Jy/beam ! Clean residual mean=-0.000005 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 1.50622 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 1.50622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072538Jy sigma=0.331446 ! Fit after self-cal, rms=0.072533Jy sigma=0.331399 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580597 Jy ! Component: 100 - total flux cleaned = 0.00787613 Jy ! Component: 150 - total flux cleaned = 0.00908842 Jy ! Component: 200 - total flux cleaned = 0.0101114 Jy ! Total flux subtracted in 200 components = 0.0101114 Jy ! Clean residual min=-0.005585 max=0.004942 Jy/beam ! Clean residual mean=-0.000006 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 1.51633 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 1.51633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071942Jy sigma=0.328771 ! Fit after self-cal, rms=0.071910Jy sigma=0.328700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071910Jy sigma=0.328700 ! Fit after self-cal, rms=0.071856Jy sigma=0.328435 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=4.544 mas, bpa=10.77 degrees ! Estimated noise=2.69929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163547 Jy ! Component: 100 - total flux cleaned = 0.0031132 Jy ! Component: 150 - total flux cleaned = 0.00419815 Jy ! Component: 200 - total flux cleaned = 0.00513477 Jy ! Total flux subtracted in 200 components = 0.00513477 Jy ! Clean residual min=-0.004191 max=0.004108 Jy/beam ! Clean residual mean=-0.000013 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 1.52146 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 111 components and 1.52146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071789Jy sigma=0.328079 ! Fit after self-cal, rms=0.071745Jy sigma=0.327907 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241366 Jy ! Component: 100 - total flux cleaned = 0.000252369 Jy ! Component: 150 - total flux cleaned = 0.000675181 Jy ! Component: 200 - total flux cleaned = 0.000896643 Jy ! Total flux subtracted in 200 components = 0.000896643 Jy ! Clean residual min=-0.004060 max=0.003801 Jy/beam ! Clean residual mean=-0.000013 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 1.52236 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 115 components and 1.52236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071730Jy sigma=0.327810 ! Fit after self-cal, rms=0.071692Jy sigma=0.327658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8226 mas, bmaj=1.903 mas, bpa=-2.925 degrees ! Estimated noise=1.97086 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8226 x 1.903 at -2.925 degrees (North through East) ! Clean map min=-0.0041314 max=1.1469 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071692Jy sigma=0.327658 ! Fit after self-cal, rms=0.066041Jy sigma=0.293120 ! Inverting map and beam ! Estimated beam: bmin=0.8227 mas, bmaj=1.906 mas, bpa=-2.995 degrees ! Estimated noise=1.97111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152016 Jy ! Component: 100 - total flux cleaned = 0.000227109 Jy ! Component: 150 - total flux cleaned = 0.000525241 Jy ! Component: 200 - total flux cleaned = 0.000792352 Jy ! Total flux subtracted in 200 components = 0.000792352 Jy ! Clean residual min=-0.004182 max=0.004600 Jy/beam ! Clean residual mean=-0.000005 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 1.52315 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 126 components and 1.52315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065842Jy sigma=0.292289 ! Fit after self-cal, rms=0.065835Jy sigma=0.292268 ! Inverting map ! Added new window around map position (9.8, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311006 Jy ! Component: 100 - total flux cleaned = 0.00318409 Jy ! Component: 150 - total flux cleaned = 0.00339649 Jy ! Component: 200 - total flux cleaned = 0.00365535 Jy ! Total flux subtracted in 200 components = 0.00365535 Jy ! Clean residual min=-0.004085 max=0.003725 Jy/beam ! Clean residual mean=-0.000005 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 1.52681 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 1.52681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065534Jy sigma=0.290935 ! Fit after self-cal, rms=0.065518Jy sigma=0.290863 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065518Jy sigma=0.290863 ! Fit after self-cal, rms=0.065478Jy sigma=0.290735 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6463 mas, bmaj=1.525 mas, bpa=-2.346 degrees ! Estimated noise=2.93604 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.853823 Jy ! Component: 100 - total flux cleaned = 1.06267 Jy ! Component: 150 - total flux cleaned = 1.15825 Jy ! Component: 200 - total flux cleaned = 1.2214 Jy ! Total flux subtracted in 200 components = 1.2214 Jy ! Clean residual min=-0.019918 max=0.037552 Jy/beam ! Clean residual mean=-0.000037 rms=0.004753 Jy/beam ! Combined flux in latest and established models = 1.2214 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.2214 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8224 mas, bmaj=1.905 mas, bpa=-2.992 degrees ! Estimated noise=1.96962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0795501 Jy ! Component: 100 - total flux cleaned = 0.129556 Jy ! Component: 150 - total flux cleaned = 0.162923 Jy ! Component: 200 - total flux cleaned = 0.185715 Jy ! Total flux subtracted in 200 components = 0.185715 Jy ! Clean residual min=-0.008930 max=0.021114 Jy/beam ! Clean residual mean=-0.000011 rms=0.002948 Jy/beam ! Combined flux in latest and established models = 1.40712 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 49 components and 1.40712 Jy ! Inverting map ! Added new window around map position (2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200271 Jy ! Component: 100 - total flux cleaned = 0.032445 Jy ! Component: 150 - total flux cleaned = 0.0423529 Jy ! Component: 200 - total flux cleaned = 0.0504362 Jy ! Total flux subtracted in 200 components = 0.0504362 Jy ! Clean residual min=-0.005928 max=0.006558 Jy/beam ! Clean residual mean=-0.000008 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 1.45755 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 87 components and 1.45755 Jy ! Inverting map ! Added new window around map position (0.8, 9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727364 Jy ! Component: 100 - total flux cleaned = 0.0133113 Jy ! Component: 150 - total flux cleaned = 0.0186201 Jy ! Component: 200 - total flux cleaned = 0.0233579 Jy ! Total flux subtracted in 200 components = 0.0233579 Jy ! Clean residual min=-0.004492 max=0.004540 Jy/beam ! Clean residual mean=-0.000006 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 1.48091 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 115 components and 1.48091 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=4.547 mas, bpa=10.71 degrees ! Estimated noise=2.69719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741553 Jy ! Component: 100 - total flux cleaned = 0.0130405 Jy ! Component: 150 - total flux cleaned = 0.0176946 Jy ! Component: 200 - total flux cleaned = 0.0215896 Jy ! Total flux subtracted in 200 components = 0.0215896 Jy ! Clean residual min=-0.005098 max=0.004443 Jy/beam ! Clean residual mean=-0.000011 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 1.5025 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329019 Jy ! Component: 100 - total flux cleaned = 0.00609788 Jy ! Component: 150 - total flux cleaned = 0.00853439 Jy ! Component: 200 - total flux cleaned = 0.0106629 Jy ! Total flux subtracted in 200 components = 0.0106629 Jy ! Clean residual min=-0.004648 max=0.003710 Jy/beam ! Clean residual mean=-0.000010 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 1.51316 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 181 components and 1.51316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8224 mas, bmaj=1.905 mas, bpa=-2.992 degrees ! Estimated noise=1.96962 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228047 Jy ! Component: 100 - total flux cleaned = 0.00408765 Jy ! Component: 150 - total flux cleaned = 0.0054073 Jy ! Component: 200 - total flux cleaned = 0.00654321 Jy ! Total flux subtracted in 200 components = 0.00654321 Jy ! Clean residual min=-0.002968 max=0.003153 Jy/beam ! Clean residual mean=-0.000005 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 1.51971 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 204 components and 1.51971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064986Jy sigma=0.288824 ! Fit after self-cal, rms=0.064879Jy sigma=0.288252 wmodel J1215-1731_X_d_map.mod ! Writing 204 model components to file: J1215-1731_X_d_map.mod wobs J1215-1731_X_d_uvs.fits ! Writing UV FITS file: J1215-1731_X_d_uvs.fits wwins J1215-1731_X_d_map.win ! wwins: Wrote 8 windows to J1215-1731_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333258 Jy ! Component: 100 - total flux cleaned = 0.000434929 Jy ! Component: 150 - total flux cleaned = 0.000387306 Jy ! Component: 200 - total flux cleaned = 0.000300377 Jy ! Component: 250 - total flux cleaned = -3.68863e-05 Jy ! Component: 300 - total flux cleaned = -0.000199698 Jy ! Component: 350 - total flux cleaned = -0.000317579 Jy ! Component: 400 - total flux cleaned = -0.000508686 Jy ! Component: 450 - total flux cleaned = -0.000731643 Jy ! Component: 500 - total flux cleaned = -0.000803804 Jy ! Component: 550 - total flux cleaned = -0.00105144 Jy ! Component: 600 - total flux cleaned = -0.00115467 Jy ! Component: 650 - total flux cleaned = -0.001392 Jy ! Component: 700 - total flux cleaned = -0.00155819 Jy ! Component: 750 - total flux cleaned = -0.00175352 Jy ! Component: 800 - total flux cleaned = -0.00185049 Jy ! Component: 850 - total flux cleaned = -0.00216473 Jy ! Component: 900 - total flux cleaned = -0.00244217 Jy ! Component: 950 - total flux cleaned = -0.00265476 Jy ! Component: 1000 - total flux cleaned = -0.00274503 Jy ! Component: 1050 - total flux cleaned = -0.00297946 Jy ! Component: 1100 - total flux cleaned = -0.00312375 Jy ! Component: 1150 - total flux cleaned = -0.00329447 Jy ! Component: 1200 - total flux cleaned = -0.00343473 Jy ! Component: 1250 - total flux cleaned = -0.00365519 Jy ! Component: 1300 - total flux cleaned = -0.00379092 Jy ! Component: 1350 - total flux cleaned = -0.00384478 Jy ! Component: 1400 - total flux cleaned = -0.00395053 Jy ! Component: 1450 - total flux cleaned = -0.00400248 Jy ! Component: 1500 - total flux cleaned = -0.00402833 Jy ! Component: 1550 - total flux cleaned = -0.00410476 Jy ! Component: 1600 - total flux cleaned = -0.00422973 Jy ! Component: 1650 - total flux cleaned = -0.0042046 Jy ! Component: 1700 - total flux cleaned = -0.00427764 Jy ! Component: 1750 - total flux cleaned = -0.00439718 Jy ! Component: 1800 - total flux cleaned = -0.0043731 Jy ! Component: 1850 - total flux cleaned = -0.00441957 Jy ! Component: 1900 - total flux cleaned = -0.00444221 Jy ! Component: 1950 - total flux cleaned = -0.00444211 Jy ! Component: 2000 - total flux cleaned = -0.00441961 Jy ! Component: 2050 - total flux cleaned = -0.00453177 Jy ! Component: 2100 - total flux cleaned = -0.00457545 Jy ! Component: 2150 - total flux cleaned = -0.0045753 Jy ! Component: 2200 - total flux cleaned = -0.00461876 Jy ! Component: 2250 - total flux cleaned = -0.00470424 Jy ! Component: 2300 - total flux cleaned = -0.00464071 Jy ! Component: 2350 - total flux cleaned = -0.00470354 Jy ! Component: 2400 - total flux cleaned = -0.00474482 Jy ! Component: 2450 - total flux cleaned = -0.00478582 Jy ! Component: 2500 - total flux cleaned = -0.0047449 Jy ! Component: 2550 - total flux cleaned = -0.00470507 Jy ! Component: 2600 - total flux cleaned = -0.00478442 Jy ! Component: 2650 - total flux cleaned = -0.00482361 Jy ! Component: 2700 - total flux cleaned = -0.00476512 Jy ! Component: 2750 - total flux cleaned = -0.00476519 Jy ! Component: 2800 - total flux cleaned = -0.00480365 Jy ! Component: 2850 - total flux cleaned = -0.00476589 Jy ! Component: 2900 - total flux cleaned = -0.00472851 Jy ! Component: 2950 - total flux cleaned = -0.00480271 Jy ! Component: 3000 - total flux cleaned = -0.00480293 Jy ! Component: 3050 - total flux cleaned = -0.00482125 Jy ! Component: 3100 - total flux cleaned = -0.0048394 Jy ! Component: 3150 - total flux cleaned = -0.00478566 Jy ! Component: 3200 - total flux cleaned = -0.00473232 Jy ! Component: 3250 - total flux cleaned = -0.00476781 Jy ! Component: 3300 - total flux cleaned = -0.00478527 Jy ! Component: 3350 - total flux cleaned = -0.00483719 Jy ! Component: 3400 - total flux cleaned = -0.00480256 Jy ! Component: 3450 - total flux cleaned = -0.00478559 Jy ! Component: 3500 - total flux cleaned = -0.00488737 Jy ! Component: 3550 - total flux cleaned = -0.00488738 Jy ! Component: 3600 - total flux cleaned = -0.00492055 Jy ! Component: 3650 - total flux cleaned = -0.00490403 Jy ! Component: 3700 - total flux cleaned = -0.00500245 Jy ! Component: 3750 - total flux cleaned = -0.00500241 Jy ! Component: 3800 - total flux cleaned = -0.00500249 Jy ! Component: 3850 - total flux cleaned = -0.0050346 Jy ! Component: 3900 - total flux cleaned = -0.00508258 Jy ! Component: 3950 - total flux cleaned = -0.00513006 Jy ! Component: 4000 - total flux cleaned = -0.00517716 Jy ! Component: 4050 - total flux cleaned = -0.00509918 Jy ! Total flux subtracted in 4096 components = -0.00516143 Jy ! Clean residual min=-0.000977 max=0.000920 Jy/beam ! Clean residual mean=-0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 1.51455 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 495 components and 1.51455 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1215-1731_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8224 x 1.905 at -2.992 degrees (North through East) ! Clean map min=-0.0013434 max=1.1544 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1215-1731_X_d_map.fits wmodel /image_prod/ug002_uva//J1215-1731_X_d_map.mod ! Writing 495 model components to file: /image_prod/ug002_uva//J1215-1731_X_d_map.mod wobs /image_prod/ug002_uva//J1215-1731_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1215-1731_X_d_uvs.fits wwins /image_prod/ug002_uva//J1215-1731_X_d_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J1215-1731_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.15443 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000257696 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0669671 0.0669671 0.133934 0.267868 0.535737 1.07147 2.14295 4.28589 8.57179 17.1436 34.2871 68.5743 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.154 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4479.81 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1215-1731_X_d_dfm.log closed on Thu Mar 5 00:32:57 2020