! Started logfile: /image_prod/ug002_uva//J1209-2032_X_dfm.log on Thu Mar 5 00:27:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1209-2032_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1209-2032_X_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970667 visibilities/baseline/integration-bin. ! Found source: J1209-2032 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 26208 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1209-2032_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.063033Jy sigma=8.451130 ! Fit after self-cal, rms=0.686975Jy sigma=5.544450 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6096 mas, bmaj=1.661 mas, bpa=-5.679 degrees ! Estimated noise=1.02741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213515 Jy ! Component: 100 - total flux cleaned = 0.302485 Jy ! Total flux subtracted in 100 components = 0.302485 Jy ! Clean residual min=-0.014968 max=0.044384 Jy/beam ! Clean residual mean=-0.000030 rms=0.004508 Jy/beam ! Combined flux in latest and established models = 0.302485 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.302485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141939Jy sigma=1.081400 ! Fit after self-cal, rms=0.141746Jy sigma=1.079726 ! Inverting map ! Added new window around map position (-0.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509548 Jy ! Component: 100 - total flux cleaned = 0.0850168 Jy ! Total flux subtracted in 100 components = 0.0850168 Jy ! Clean residual min=-0.010908 max=0.034209 Jy/beam ! Clean residual mean=-0.000014 rms=0.002948 Jy/beam ! Combined flux in latest and established models = 0.387501 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.387501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098645Jy sigma=0.742819 ! Fit after self-cal, rms=0.098141Jy sigma=0.738394 ! Inverting map ! Added new window around map position (0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295991 Jy ! Component: 100 - total flux cleaned = 0.049994 Jy ! Total flux subtracted in 100 components = 0.049994 Jy ! Clean residual min=-0.007652 max=0.015104 Jy/beam ! Clean residual mean=-0.000004 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.437495 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.437495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079087Jy sigma=0.590413 ! Fit after self-cal, rms=0.079037Jy sigma=0.590230 ! Inverting map ! Added new window around map position (-1.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163503 Jy ! Component: 100 - total flux cleaned = 0.0283176 Jy ! Total flux subtracted in 100 components = 0.0283176 Jy ! Clean residual min=-0.006793 max=0.014186 Jy/beam ! Clean residual mean=0.000001 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 0.465813 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.465813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071991Jy sigma=0.537485 ! Fit after self-cal, rms=0.071949Jy sigma=0.537144 ! Inverting map ! Added new window around map position (15.4, 11.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127435 Jy ! Component: 100 - total flux cleaned = 0.0213425 Jy ! Total flux subtracted in 100 components = 0.0213425 Jy ! Clean residual min=-0.007091 max=0.008212 Jy/beam ! Clean residual mean=0.000002 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.487156 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.487156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068782Jy sigma=0.512042 ! Fit after self-cal, rms=0.068672Jy sigma=0.511182 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7997 mas, bmaj=2.018 mas, bpa=-5.167 degrees ! Estimated noise=0.558285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011989 Jy ! Component: 100 - total flux cleaned = 0.0200692 Jy ! Component: 150 - total flux cleaned = 0.0260307 Jy ! Component: 200 - total flux cleaned = 0.0304812 Jy ! Total flux subtracted in 200 components = 0.0304812 Jy ! Clean residual min=-0.009312 max=0.008124 Jy/beam ! Clean residual mean=0.000009 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.517637 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 62 components and 0.517637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065795Jy sigma=0.491050 ! Fit after self-cal, rms=0.065746Jy sigma=0.490668 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7997 x 2.018 at -5.167 degrees (North through East) ! Clean map min=-0.0089274 max=0.30097 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.94 KP 1.03 ! LA 1.06 MK 1.03 NL 1.03 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.97 KP 1.03 ! LA 1.05 MK 1.03 NL 1.06 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.97 KP 1.03 ! LA 1.04 MK 1.03 NL 1.04 OV 0.92 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.95 KP 1.03 ! LA 1.05 MK 1.04 NL 1.04 OV 0.91 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.97 KP 1.03 ! LA 1.07 MK 1.02 NL 1.02 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.95 KP 1.04 ! LA 1.05 MK 1.05 NL 1.04 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.98 KP 1.04 ! LA 1.06 MK 1.02 NL 1.03 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.96 KP 1.04 ! LA 1.06 MK 1.02 NL 1.04 OV 0.91 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.98 KP 1.04 ! LA 1.06 MK 1.00 NL 1.06 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.96 KP 1.04 ! LA 1.05 MK 1.00 NL 1.02 OV 0.93 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.95 KP 1.05 ! LA 1.06 MK 1.06 NL 1.05 OV 0.93 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.97 KP 1.04 ! LA 1.07 MK 1.01 NL 1.05 OV 0.92 ! PT 0.92 SC 0.99 ! ! ! Fit before self-cal, rms=0.065746Jy sigma=0.490668 ! Fit after self-cal, rms=0.059456Jy sigma=0.450518 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8008 mas, bmaj=2.018 mas, bpa=-4.63 degrees ! Estimated noise=0.553443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442172 Jy ! Component: 100 - total flux cleaned = 0.00539875 Jy ! Component: 150 - total flux cleaned = 0.00580795 Jy ! Component: 200 - total flux cleaned = 0.00606731 Jy ! Total flux subtracted in 200 components = 0.00606731 Jy ! Clean residual min=-0.003782 max=0.004371 Jy/beam ! Clean residual mean=0.000003 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.523704 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 91 components and 0.523704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058891Jy sigma=0.446607 ! Fit after self-cal, rms=0.058863Jy sigma=0.446428 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058863Jy sigma=0.446428 ! Fit after self-cal, rms=0.057649Jy sigma=0.432866 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8023 mas, bmaj=2.013 mas, bpa=-4.769 degrees ! Estimated noise=0.553342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155066 Jy ! Component: 100 - total flux cleaned = 0.00193359 Jy ! Component: 150 - total flux cleaned = 0.00199786 Jy ! Component: 200 - total flux cleaned = 0.00194552 Jy ! Total flux subtracted in 200 components = 0.00194552 Jy ! Clean residual min=-0.001766 max=0.003083 Jy/beam ! Clean residual mean=0.000000 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.52565 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.52565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057487Jy sigma=0.431470 ! Fit after self-cal, rms=0.057493Jy sigma=0.431380 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.2, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288991 Jy ! Component: 100 - total flux cleaned = 0.00437373 Jy ! Component: 150 - total flux cleaned = 0.00499231 Jy ! Component: 200 - total flux cleaned = 0.00521473 Jy ! Total flux subtracted in 200 components = 0.00521473 Jy ! Clean residual min=-0.001630 max=0.001640 Jy/beam ! Clean residual mean=-0.000000 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.530864 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 124 components and 0.530864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057319Jy sigma=0.430062 ! Fit after self-cal, rms=0.057312Jy sigma=0.430009 ! Inverting map ! Added new window around map position (7.4, 30.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110492 Jy ! Component: 100 - total flux cleaned = 0.00153303 Jy ! Component: 150 - total flux cleaned = 0.00176007 Jy ! Component: 200 - total flux cleaned = 0.0017939 Jy ! Total flux subtracted in 200 components = 0.0017939 Jy ! Clean residual min=-0.001457 max=0.001304 Jy/beam ! Clean residual mean=-0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.532658 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 0.532658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057250Jy sigma=0.429517 ! Fit after self-cal, rms=0.057248Jy sigma=0.429508 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057248Jy sigma=0.429508 ! Fit after self-cal, rms=0.057274Jy sigma=0.429257 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8024 mas, bmaj=2.011 mas, bpa=-4.75 degrees ! Estimated noise=0.552997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000555393 Jy ! Component: 100 - total flux cleaned = -0.000414967 Jy ! Component: 150 - total flux cleaned = -0.00038258 Jy ! Component: 200 - total flux cleaned = -0.000383042 Jy ! Total flux subtracted in 200 components = -0.000383042 Jy ! Clean residual min=-0.001318 max=0.001215 Jy/beam ! Clean residual mean=-0.000001 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.532275 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 147 components and 0.532275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057236Jy sigma=0.428914 ! Fit after self-cal, rms=0.057236Jy sigma=0.428902 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101914 Jy ! Component: 100 - total flux cleaned = -0.000130146 Jy ! Component: 150 - total flux cleaned = -0.000182231 Jy ! Component: 200 - total flux cleaned = -0.000182274 Jy ! Total flux subtracted in 200 components = -0.000182274 Jy ! Clean residual min=-0.001252 max=0.001145 Jy/beam ! Clean residual mean=-0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.532093 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 157 components and 0.532093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057214Jy sigma=0.428715 ! Fit after self-cal, rms=0.057213Jy sigma=0.428712 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057213Jy sigma=0.428712 ! Fit after self-cal, rms=0.057213Jy sigma=0.428677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.085 mas, bmaj=4.463 mas, bpa=-1.113 degrees ! Estimated noise=0.75624 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481969 Jy ! Component: 100 - total flux cleaned = 0.000678179 Jy ! Component: 150 - total flux cleaned = 0.000704758 Jy ! Component: 200 - total flux cleaned = 0.000780538 Jy ! Total flux subtracted in 200 components = 0.000780538 Jy ! Clean residual min=-0.001244 max=0.001325 Jy/beam ! Clean residual mean=-0.000002 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.532874 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 173 components and 0.532873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057202Jy sigma=0.428592 ! Fit after self-cal, rms=0.057202Jy sigma=0.428587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.20104e-06 Jy ! Component: 100 - total flux cleaned = 5.21486e-05 Jy ! Component: 150 - total flux cleaned = 6.7292e-05 Jy ! Component: 200 - total flux cleaned = 6.72207e-05 Jy ! Total flux subtracted in 200 components = 6.72207e-05 Jy ! Clean residual min=-0.001196 max=0.001322 Jy/beam ! Clean residual mean=-0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.532941 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 177 components and 0.532941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057197Jy sigma=0.428553 ! Fit after self-cal, rms=0.057197Jy sigma=0.428551 ! Inverting map ! Added new window around map position (-42.6, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886976 Jy ! Component: 100 - total flux cleaned = 0.000922821 Jy ! Component: 150 - total flux cleaned = 0.000905284 Jy ! Component: 200 - total flux cleaned = 0.000889121 Jy ! Total flux subtracted in 200 components = 0.000889121 Jy ! Clean residual min=-0.001090 max=0.001015 Jy/beam ! Clean residual mean=-0.000002 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.53383 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 205 components and 0.53383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057177Jy sigma=0.428444 ! Fit after self-cal, rms=0.057177Jy sigma=0.428434 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8023 mas, bmaj=2.01 mas, bpa=-4.721 degrees ! Estimated noise=0.552853 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8023 x 2.01 at -4.721 degrees (North through East) ! Clean map min=-0.0014228 max=0.29934 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6122 mas, bmaj=1.652 mas, bpa=-5.344 degrees ! Estimated noise=1.01833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211133 Jy ! Component: 100 - total flux cleaned = 0.299252 Jy ! Component: 150 - total flux cleaned = 0.351807 Jy ! Component: 200 - total flux cleaned = 0.389108 Jy ! Total flux subtracted in 200 components = 0.389108 Jy ! Clean residual min=-0.009079 max=0.020911 Jy/beam ! Clean residual mean=-0.000017 rms=0.002516 Jy/beam ! Combined flux in latest and established models = 0.389108 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.389108 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8023 mas, bmaj=2.01 mas, bpa=-4.721 degrees ! Estimated noise=0.552853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458592 Jy ! Component: 100 - total flux cleaned = 0.0719914 Jy ! Component: 150 - total flux cleaned = 0.0891972 Jy ! Component: 200 - total flux cleaned = 0.101078 Jy ! Total flux subtracted in 200 components = 0.101078 Jy ! Clean residual min=-0.003290 max=0.006525 Jy/beam ! Clean residual mean=-0.000006 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.490186 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 39 components and 0.490186 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00834192 Jy ! Component: 100 - total flux cleaned = 0.0142958 Jy ! Component: 150 - total flux cleaned = 0.0186544 Jy ! Component: 200 - total flux cleaned = 0.0220949 Jy ! Total flux subtracted in 200 components = 0.0220949 Jy ! Clean residual min=-0.002136 max=0.003003 Jy/beam ! Clean residual mean=-0.000002 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.512281 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 64 components and 0.512281 Jy ! Inverting map ! Added new window around map position (1.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309635 Jy ! Component: 100 - total flux cleaned = 0.00552446 Jy ! Component: 150 - total flux cleaned = 0.00759985 Jy ! Component: 200 - total flux cleaned = 0.00940334 Jy ! Total flux subtracted in 200 components = 0.00940334 Jy ! Clean residual min=-0.001579 max=0.001604 Jy/beam ! Clean residual mean=-0.000001 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.521684 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 84 components and 0.521684 Jy ! Inverting map ! Added new window around map position (-2.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172048 Jy ! Component: 100 - total flux cleaned = 0.00316297 Jy ! Component: 150 - total flux cleaned = 0.00444634 Jy ! Component: 200 - total flux cleaned = 0.00559413 Jy ! Total flux subtracted in 200 components = 0.00559413 Jy ! Clean residual min=-0.001309 max=0.001111 Jy/beam ! Clean residual mean=-0.000001 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.527278 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 99 components and 0.527278 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.085 mas, bmaj=4.463 mas, bpa=-1.113 degrees ! Estimated noise=0.75624 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180024 Jy ! Component: 100 - total flux cleaned = 0.00298522 Jy ! Component: 150 - total flux cleaned = 0.00378133 Jy ! Component: 200 - total flux cleaned = 0.00454904 Jy ! Total flux subtracted in 200 components = 0.00454904 Jy ! Clean residual min=-0.001247 max=0.001162 Jy/beam ! Clean residual mean=-0.000001 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.531827 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566455 Jy ! Component: 100 - total flux cleaned = 0.000975064 Jy ! Component: 150 - total flux cleaned = 0.00122979 Jy ! Component: 200 - total flux cleaned = 0.00148912 Jy ! Total flux subtracted in 200 components = 0.00148912 Jy ! Clean residual min=-0.001117 max=0.000998 Jy/beam ! Clean residual mean=-0.000001 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.533316 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 153 components and 0.533316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8023 mas, bmaj=2.01 mas, bpa=-4.721 degrees ! Estimated noise=0.552853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.67693e-05 Jy ! Component: 100 - total flux cleaned = 0.000129968 Jy ! Component: 150 - total flux cleaned = 0.000130072 Jy ! Component: 200 - total flux cleaned = 0.000235247 Jy ! Total flux subtracted in 200 components = 0.000235247 Jy ! Clean residual min=-0.001068 max=0.000922 Jy/beam ! Clean residual mean=-0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.533551 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 182 components and 0.533551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057121Jy sigma=0.427886 ! Fit after self-cal, rms=0.057108Jy sigma=0.427818 wmodel J1209-2032_X_map.mod ! Writing 182 model components to file: J1209-2032_X_map.mod wobs J1209-2032_X_uvs.fits ! Writing UV FITS file: J1209-2032_X_uvs.fits wwins J1209-2032_X_map.win ! wwins: Wrote 11 windows to J1209-2032_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000422084 Jy ! Component: 100 - total flux cleaned = -0.000685917 Jy ! Component: 150 - total flux cleaned = -0.000920421 Jy ! Component: 200 - total flux cleaned = -0.00103327 Jy ! Component: 250 - total flux cleaned = -0.00114284 Jy ! Component: 300 - total flux cleaned = -0.00124933 Jy ! Component: 350 - total flux cleaned = -0.00138218 Jy ! Component: 400 - total flux cleaned = -0.00146839 Jy ! Component: 450 - total flux cleaned = -0.00149677 Jy ! Component: 500 - total flux cleaned = -0.0015523 Jy ! Component: 550 - total flux cleaned = -0.00160675 Jy ! Component: 600 - total flux cleaned = -0.00168709 Jy ! Component: 650 - total flux cleaned = -0.00179218 Jy ! Component: 700 - total flux cleaned = -0.00179212 Jy ! Component: 750 - total flux cleaned = -0.00184343 Jy ! Component: 800 - total flux cleaned = -0.00193148 Jy ! Component: 850 - total flux cleaned = -0.00195637 Jy ! Component: 900 - total flux cleaned = -0.00200534 Jy ! Component: 950 - total flux cleaned = -0.00205356 Jy ! Component: 1000 - total flux cleaned = -0.00207733 Jy ! Component: 1050 - total flux cleaned = -0.00212451 Jy ! Component: 1100 - total flux cleaned = -0.00213638 Jy ! Component: 1150 - total flux cleaned = -0.00222872 Jy ! Component: 1200 - total flux cleaned = -0.00224034 Jy ! Component: 1250 - total flux cleaned = -0.00228536 Jy ! Component: 1300 - total flux cleaned = -0.00229654 Jy ! Component: 1350 - total flux cleaned = -0.00235148 Jy ! Component: 1400 - total flux cleaned = -0.00232983 Jy ! Component: 1450 - total flux cleaned = -0.00239453 Jy ! Component: 1500 - total flux cleaned = -0.0023945 Jy ! Component: 1550 - total flux cleaned = -0.00239455 Jy ! Component: 1600 - total flux cleaned = -0.00240505 Jy ! Component: 1650 - total flux cleaned = -0.00240501 Jy ! Component: 1700 - total flux cleaned = -0.00244604 Jy ! Component: 1750 - total flux cleaned = -0.00242562 Jy ! Component: 1800 - total flux cleaned = -0.00247592 Jy ! Component: 1850 - total flux cleaned = -0.00244595 Jy ! Component: 1900 - total flux cleaned = -0.00245591 Jy ! Component: 1950 - total flux cleaned = -0.00247551 Jy ! Component: 2000 - total flux cleaned = -0.00250466 Jy ! Component: 2050 - total flux cleaned = -0.00246622 Jy ! Component: 2100 - total flux cleaned = -0.00252358 Jy ! Component: 2150 - total flux cleaned = -0.00249511 Jy ! Component: 2200 - total flux cleaned = -0.00250457 Jy ! Component: 2250 - total flux cleaned = -0.00255125 Jy ! Component: 2300 - total flux cleaned = -0.00253258 Jy ! Component: 2350 - total flux cleaned = -0.00258781 Jy ! Component: 2400 - total flux cleaned = -0.00258786 Jy ! Component: 2450 - total flux cleaned = -0.00261503 Jy ! Component: 2500 - total flux cleaned = -0.00260604 Jy ! Component: 2550 - total flux cleaned = -0.00264168 Jy ! Component: 2600 - total flux cleaned = -0.00266822 Jy ! Component: 2650 - total flux cleaned = -0.00269457 Jy ! Component: 2700 - total flux cleaned = -0.00271204 Jy ! Component: 2750 - total flux cleaned = -0.00277272 Jy ! Component: 2800 - total flux cleaned = -0.00278983 Jy ! Component: 2850 - total flux cleaned = -0.00280692 Jy ! Component: 2900 - total flux cleaned = -0.00284939 Jy ! Component: 2950 - total flux cleaned = -0.00289154 Jy ! Component: 3000 - total flux cleaned = -0.00289987 Jy ! Component: 3050 - total flux cleaned = -0.00289986 Jy ! Component: 3100 - total flux cleaned = -0.0029413 Jy ! Component: 3150 - total flux cleaned = -0.00294134 Jy ! Component: 3200 - total flux cleaned = -0.00295771 Jy ! Component: 3250 - total flux cleaned = -0.00300639 Jy ! Component: 3300 - total flux cleaned = -0.0030064 Jy ! Component: 3350 - total flux cleaned = -0.00301439 Jy ! Component: 3400 - total flux cleaned = -0.0030382 Jy ! Component: 3450 - total flux cleaned = -0.00305405 Jy ! Component: 3500 - total flux cleaned = -0.00303828 Jy ! Component: 3550 - total flux cleaned = -0.00306172 Jy ! Component: 3600 - total flux cleaned = -0.00304613 Jy ! Component: 3650 - total flux cleaned = -0.00307703 Jy ! Component: 3700 - total flux cleaned = -0.00308466 Jy ! Component: 3750 - total flux cleaned = -0.00307707 Jy ! Component: 3800 - total flux cleaned = -0.00309222 Jy ! Component: 3850 - total flux cleaned = -0.00307713 Jy ! Component: 3900 - total flux cleaned = -0.00306972 Jy ! Component: 3950 - total flux cleaned = -0.0031144 Jy ! Component: 4000 - total flux cleaned = -0.00313657 Jy ! Component: 4050 - total flux cleaned = -0.00314394 Jy ! Total flux subtracted in 4096 components = -0.00312197 Jy ! Clean residual min=-0.000502 max=0.000493 Jy/beam ! Clean residual mean=-0.000001 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.530429 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 471 components and 0.530429 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1209-2032_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8023 x 2.01 at -4.721 degrees (North through East) ! Clean map min=-0.00079352 max=0.29882 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1209-2032_X_map.fits wmodel /image_prod/ug002_uva//J1209-2032_X_map.mod ! Writing 471 model components to file: /image_prod/ug002_uva//J1209-2032_X_map.mod wobs /image_prod/ug002_uva//J1209-2032_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1209-2032_X_uvs.fits wwins /image_prod/ug002_uva//J1209-2032_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J1209-2032_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.298816 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126653 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.127155 0.127155 0.25431 0.508621 1.01724 2.03448 4.06897 8.13793 16.2759 32.5517 65.1035 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.298 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2359.32 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1209-2032_X_dfm.log closed on Thu Mar 5 00:27:43 2020