! Started logfile: /image_prod/ug002_uva//J1209+433A_S_a_dfm.log on Thu Mar  5 00:27:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1209+433A_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1209+433A_S_a_uva.fits
! AN table 1: 30 integrations on 6 of 6 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1209+433A
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 540 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1209+433A_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.002635Jy  sigma=11.439851
! Fit after  self-cal, rms=0.927348Jy  sigma=10.588610
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=25.16 mas, bmaj=27.23 mas, bpa=-26.04 degrees
! Estimated noise=2.92935 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0665235 Jy
! Component: 100  -  total flux cleaned = 0.0876205 Jy
! Total flux subtracted in 100 components = 0.0876205 Jy
! Clean residual min=-0.018637 max=0.018655 Jy/beam
! Clean residual mean=0.000549 rms=0.009452 Jy/beam
! Combined flux in latest and established models = 0.0876205 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 0.0876205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064877Jy  sigma=0.699292
! Fit after  self-cal, rms=0.063458Jy  sigma=0.685913
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=25.19 mas, bmaj=27.01 mas, bpa=-17.39 degrees
! Estimated noise=2.70676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203705 Jy
! Component: 100  -  total flux cleaned = -0.00110408 Jy
! Component: 150  -  total flux cleaned = -0.00352119 Jy
! Component: 200  -  total flux cleaned = -0.00602195 Jy
! Total flux subtracted in 200 components = -0.00602195 Jy
! Clean residual min=-0.007581 max=0.007448 Jy/beam
! Clean residual mean=0.000273 rms=0.004202 Jy/beam
! Combined flux in latest and established models = 0.0815985 Jy
! Performing phase self-cal
! Adding 139 model components to the UV plane model.
! The established model now contains 188 components and 0.0815985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045517Jy  sigma=0.488437
! Fit after  self-cal, rms=0.044951Jy  sigma=0.483517
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 25.19 x 27.01 at -17.39 degrees (North through East)
! Clean map  min=-0.024981  max=0.07057 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     KP        1.29     LA        0.98     PT        0.73     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     KP        1.07     LA        0.97     PT        0.83     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        1.18     LA        0.94     PT        0.77     
! 
! 
! Fit before self-cal, rms=0.044951Jy  sigma=0.483517
! Fit after  self-cal, rms=0.040788Jy  sigma=0.420554
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=26.72 mas, bmaj=27.57 mas, bpa=-0.4319 degrees
! Estimated noise=2.60481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00299544 Jy
! Component: 100  -  total flux cleaned = -0.00258673 Jy
! Component: 150  -  total flux cleaned = -0.00241137 Jy
! Component: 200  -  total flux cleaned = -0.0021085 Jy
! Total flux subtracted in 200 components = -0.0021085 Jy
! Clean residual min=-0.001206 max=0.001200 Jy/beam
! Clean residual mean=-0.000026 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.07949 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 260 components and 0.0794901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.040242Jy  sigma=0.412990
! Fit after  self-cal, rms=0.040714Jy  sigma=0.409238
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.040714Jy  sigma=0.409238
! Fit after  self-cal, rms=0.048176Jy  sigma=0.405002
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.47 mas, bmaj=28.31 mas, bpa=5.613 degrees
! Estimated noise=2.63915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000964202 Jy
! Component: 100  -  total flux cleaned = -0.00201114 Jy
! Component: 150  -  total flux cleaned = -0.00288402 Jy
! Component: 200  -  total flux cleaned = -0.00336861 Jy
! Total flux subtracted in 200 components = -0.00336861 Jy
! Clean residual min=-0.000883 max=0.000871 Jy/beam
! Clean residual mean=-0.000000 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.0761214 Jy
selfcal
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 352 components and 0.0761215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.047915Jy  sigma=0.403381
! Fit after  self-cal, rms=0.048445Jy  sigma=0.402324
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.96214e-05 Jy
! Component: 100  -  total flux cleaned = -0.000193527 Jy
! Component: 150  -  total flux cleaned = -3.08617e-07 Jy
! Component: 200  -  total flux cleaned = -8.3417e-08 Jy
! Total flux subtracted in 200 components = -8.3417e-08 Jy
! Clean residual min=-0.000716 max=0.000711 Jy/beam
! Clean residual mean=0.000002 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.0761214 Jy
! Performing phase self-cal
! Adding 90 model components to the UV plane model.
! The established model now contains 437 components and 0.0761213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048260Jy  sigma=0.401086
! Fit after  self-cal, rms=0.048419Jy  sigma=0.400827
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.048419Jy  sigma=0.400827
! Fit after  self-cal, rms=0.050279Jy  sigma=0.400534
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.38 mas, bmaj=28.48 mas, bpa=7.036 degrees
! Estimated noise=2.63655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000561272 Jy
! Component: 100  -  total flux cleaned = -0.000757364 Jy
! Component: 150  -  total flux cleaned = -0.000757431 Jy
! Component: 200  -  total flux cleaned = -0.000955707 Jy
! Total flux subtracted in 200 components = -0.000955707 Jy
! Clean residual min=-0.000653 max=0.000652 Jy/beam
! Clean residual mean=0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0751656 Jy
selfcal
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 516 components and 0.0751656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050138Jy  sigma=0.399804
! Fit after  self-cal, rms=0.050299Jy  sigma=0.399624
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000194064 Jy
! Component: 100  -  total flux cleaned = -0.000153358 Jy
! Component: 150  -  total flux cleaned = -0.000112553 Jy
! Component: 200  -  total flux cleaned = -0.000220459 Jy
! Total flux subtracted in 200 components = -0.000220459 Jy
! Clean residual min=-0.000592 max=0.000595 Jy/beam
! Clean residual mean=0.000005 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.0749452 Jy
! Performing phase self-cal
! Adding 94 model components to the UV plane model.
! The established model now contains 595 components and 0.0749452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050181Jy  sigma=0.399089
! Fit after  self-cal, rms=0.050269Jy  sigma=0.398992
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050269Jy  sigma=0.398992
! Fit after  self-cal, rms=0.049407Jy  sigma=0.398807
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.56 mas, bmaj=28.69 mas, bpa=8.278 degrees
! Estimated noise=2.61706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000270173 Jy
! Component: 100  -  total flux cleaned = -6.95309e-05 Jy
! Component: 150  -  total flux cleaned = 5.45989e-06 Jy
! Component: 200  -  total flux cleaned = 4.67659e-06 Jy
! Total flux subtracted in 200 components = 4.67659e-06 Jy
! Clean residual min=-0.000602 max=0.000605 Jy/beam
! Clean residual mean=0.000002 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0749498 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 646 components and 0.0749498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049306Jy  sigma=0.398300
! Fit after  self-cal, rms=0.049372Jy  sigma=0.398189
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129565 Jy
! Component: 100  -  total flux cleaned = -5.04745e-05 Jy
! Component: 150  -  total flux cleaned = 0.000133018 Jy
! Component: 200  -  total flux cleaned = 0.000132199 Jy
! Total flux subtracted in 200 components = 0.000132199 Jy
! Clean residual min=-0.000570 max=0.000568 Jy/beam
! Clean residual mean=0.000004 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.075082 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 706 components and 0.0750821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049278Jy  sigma=0.397735
! Fit after  self-cal, rms=0.049308Jy  sigma=0.397652
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=26.32 mas, bmaj=28.56 mas, bpa=7.599 degrees
! Estimated noise=2.62329 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 26.32 x 28.56 at 7.599 degrees (North through East)
! Clean map  min=-0.016409  max=0.064524 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.6 mas, bmaj=28.52 mas, bpa=-8.147 degrees
! Estimated noise=2.88747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0641633 Jy
! Component: 100  -  total flux cleaned = 0.0868739 Jy
! Component: 150  -  total flux cleaned = 0.0888206 Jy
! Component: 200  -  total flux cleaned = 0.0895196 Jy
! Total flux subtracted in 200 components = 0.0895196 Jy
! Clean residual min=-0.010945 max=0.010916 Jy/beam
! Clean residual mean=0.000345 rms=0.005122 Jy/beam
! Combined flux in latest and established models = 0.0895196 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 109 model components to the UV plane model.
! The established model now contains 109 components and 0.0895196 Jy
! Inverting map and beam 
! Estimated beam: bmin=26.32 mas, bmaj=28.56 mas, bpa=7.599 degrees
! Estimated noise=2.62329 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00416344 Jy
! Component: 100  -  total flux cleaned = -0.00603269 Jy
! Component: 150  -  total flux cleaned = -0.00549726 Jy
! Component: 200  -  total flux cleaned = -0.00509737 Jy
! Total flux subtracted in 200 components = -0.00509737 Jy
! Clean residual min=-0.003158 max=0.003187 Jy/beam
! Clean residual mean=0.000117 rms=0.001622 Jy/beam
! Combined flux in latest and established models = 0.0844223 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 219 components and 0.0844223 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.56 mas, bmaj=28.69 mas, bpa=8.278 degrees
! Estimated noise=2.61706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00146401 Jy
! Component: 100  -  total flux cleaned = -0.00120991 Jy
! Component: 150  -  total flux cleaned = -0.000585495 Jy
! Component: 200  -  total flux cleaned = 0.000259407 Jy
! Total flux subtracted in 200 components = 0.000259407 Jy
! Clean residual min=-0.001277 max=0.001295 Jy/beam
! Clean residual mean=0.000045 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.0846817 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000587699 Jy
! Component: 100  -  total flux cleaned = 0.00124986 Jy
! Component: 150  -  total flux cleaned = 0.00205572 Jy
! Component: 200  -  total flux cleaned = 0.00276256 Jy
! Total flux subtracted in 200 components = 0.00276256 Jy
! Clean residual min=-0.000959 max=0.000970 Jy/beam
! Clean residual mean=0.000036 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0874442 Jy
! Adding 193 model components to the UV plane model.
! The established model now contains 403 components and 0.0874443 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=26.32 mas, bmaj=28.56 mas, bpa=7.599 degrees
! Estimated noise=2.62329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000440742 Jy
! Component: 100  -  total flux cleaned = 0.000233648 Jy
! Component: 150  -  total flux cleaned = 0.000156258 Jy
! Component: 200  -  total flux cleaned = 0.000300154 Jy
! Total flux subtracted in 200 components = 0.000300154 Jy
! Clean residual min=-0.000586 max=0.000593 Jy/beam
! Clean residual mean=0.000006 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0877444 Jy
selfcal
! Performing phase self-cal
! Adding 90 model components to the UV plane model.
! The established model now contains 493 components and 0.0877445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049582Jy  sigma=0.401375
! Fit after  self-cal, rms=0.049484Jy  sigma=0.399721
wmodel J1209+433A_S_a_map.mod
! Writing 493 model components to file: J1209+433A_S_a_map.mod
wobs   J1209+433A_S_a_uvs.fits
! Writing UV FITS file: J1209+433A_S_a_uvs.fits
wwins  J1209+433A_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uva//J1209+433A_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 26.32 x 28.56 at 7.599 degrees (North through East)
! Clean map  min=-0.014269  max=0.057787 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1209+433A_S_a_map.fits
wmodel /image_prod/ug002_uva//J1209+433A_S_a_map.mod
! Writing 493 model components to file: /image_prod/ug002_uva//J1209+433A_S_a_map.mod
wobs   /image_prod/ug002_uva//J1209+433A_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1209+433A_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J1209+433A_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0577873 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000547678 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.84324 2.84324 5.68648 11.373 22.7459 45.4918 90.9837
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  105.513 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1209+433A_S_a_dfm.log closed on Thu Mar  5 00:27:07 2020