! Started logfile: /image_prod/ug002_uva//J1209+2547_X_dfm.log on Thu Mar 5 00:26:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1209+2547_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1209+2547_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782963 visibilities/baseline/integration-bin. ! Found source: J1209+2547 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 25368 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1209+2547_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013368Jy sigma=9.045687 ! Fit after self-cal, rms=0.846785Jy sigma=7.589030 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7011 mas, bmaj=1.545 mas, bpa=-7.946 degrees ! Estimated noise=0.964084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117882 Jy ! Component: 100 - total flux cleaned = 0.14791 Jy ! Total flux subtracted in 100 components = 0.14791 Jy ! Clean residual min=-0.006263 max=0.014019 Jy/beam ! Clean residual mean=-0.000003 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.14791 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.14791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067296Jy sigma=0.573161 ! Fit after self-cal, rms=0.067281Jy sigma=0.573000 ! Inverting map ! Added new window around map position (-1.6, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152357 Jy ! Component: 100 - total flux cleaned = 0.0229105 Jy ! Total flux subtracted in 100 components = 0.0229105 Jy ! Clean residual min=-0.005629 max=0.011559 Jy/beam ! Clean residual mean=-0.000002 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.170821 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.170821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063420Jy sigma=0.538416 ! Fit after self-cal, rms=0.063291Jy sigma=0.537202 ! Inverting map ! Added new window around map position (-10.2, -12.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00979753 Jy ! Component: 100 - total flux cleaned = 0.0123557 Jy ! Total flux subtracted in 100 components = 0.0123557 Jy ! Clean residual min=-0.004852 max=0.007788 Jy/beam ! Clean residual mean=-0.000001 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.183176 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.183176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061157Jy sigma=0.516216 ! Fit after self-cal, rms=0.060998Jy sigma=0.514924 ! Inverting map ! Added new window around map position (-5.4, 11.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072283 Jy ! Component: 100 - total flux cleaned = 0.0108943 Jy ! Total flux subtracted in 100 components = 0.0108943 Jy ! Clean residual min=-0.004324 max=0.006139 Jy/beam ! Clean residual mean=-0.000001 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.194071 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.194071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059982Jy sigma=0.505085 ! Fit after self-cal, rms=0.059946Jy sigma=0.504799 ! Inverting map ! Added new window around map position (-8, -10.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00592338 Jy ! Component: 100 - total flux cleaned = 0.00840053 Jy ! Total flux subtracted in 100 components = 0.00840053 Jy ! Clean residual min=-0.003908 max=0.004415 Jy/beam ! Clean residual mean=-0.000000 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.202471 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.202471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059155Jy sigma=0.497120 ! Fit after self-cal, rms=0.059112Jy sigma=0.496785 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8938 mas, bmaj=1.852 mas, bpa=-5.726 degrees ! Estimated noise=0.503977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582325 Jy ! Component: 100 - total flux cleaned = 0.00996634 Jy ! Component: 150 - total flux cleaned = 0.0121791 Jy ! Component: 200 - total flux cleaned = 0.014044 Jy ! Total flux subtracted in 200 components = 0.014044 Jy ! Clean residual min=-0.003667 max=0.003798 Jy/beam ! Clean residual mean=0.000001 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.216515 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 69 components and 0.216515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058344Jy sigma=0.489221 ! Fit after self-cal, rms=0.058276Jy sigma=0.488632 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8938 x 1.852 at -5.726 degrees (North through East) ! Clean map min=-0.0035208 max=0.14906 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.93 HN 1.03 KP 1.09 ! LA 1.04 MK 1.04 NL 1.14 OV 0.94 ! PT 0.95 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.91 HN 1.01 KP 1.07 ! LA 1.03 MK 1.01 NL 1.10 OV 0.96 ! PT 0.95 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 0.99 KP 1.09 ! LA 1.08 MK 1.00 NL 1.12 OV 0.94 ! PT 0.96 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 1.03 KP 1.06 ! LA 1.04 MK 1.05 NL 1.12 OV 0.96 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.01 KP 1.08 ! LA 1.04 MK 1.00 NL 1.11 OV 0.95 ! PT 0.96 SC 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.04 KP 1.07 ! LA 1.06 MK 1.01 NL 1.10 OV 0.93 ! PT 0.96 SC 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.92 HN 1.00 KP 1.06 ! LA 1.05 MK 1.01 NL 1.10 OV 0.96 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 1.03 KP 1.08 ! LA 1.03 MK 0.98 NL 1.10 OV 0.95 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 0.98 KP 1.07 ! LA 1.03 MK 1.02 NL 1.12 OV 0.95 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 1.02 KP 1.07 ! LA 1.05 MK 1.02 NL 1.08 OV 0.96 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 HN 1.00 KP 1.09 ! LA 1.03 MK 0.98 NL 1.09 OV 0.93 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 HN 0.98 KP 1.07 ! LA 1.07 MK 0.99 NL 1.13 OV 0.97 ! PT 0.94 SC 0.95 ! ! ! Fit before self-cal, rms=0.058276Jy sigma=0.488632 ! Fit after self-cal, rms=0.055588Jy sigma=0.475309 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8889 mas, bmaj=1.837 mas, bpa=-4.797 degrees ! Estimated noise=0.504416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155046 Jy ! Component: 100 - total flux cleaned = 0.0024838 Jy ! Component: 150 - total flux cleaned = 0.00303545 Jy ! Component: 200 - total flux cleaned = 0.0035165 Jy ! Total flux subtracted in 200 components = 0.0035165 Jy ! Clean residual min=-0.001779 max=0.002801 Jy/beam ! Clean residual mean=-0.000000 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.220032 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 0.220032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055402Jy sigma=0.473453 ! Fit after self-cal, rms=0.055377Jy sigma=0.473192 ! Inverting map ! Added new window around map position (-5.6, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242724 Jy ! Component: 100 - total flux cleaned = 0.0032265 Jy ! Component: 150 - total flux cleaned = 0.00388264 Jy ! Component: 200 - total flux cleaned = 0.00431816 Jy ! Total flux subtracted in 200 components = 0.00431816 Jy ! Clean residual min=-0.001566 max=0.001450 Jy/beam ! Clean residual mean=-0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.22435 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.22435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055251Jy sigma=0.472003 ! Fit after self-cal, rms=0.055246Jy sigma=0.471965 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055246Jy sigma=0.471965 ! Fit after self-cal, rms=0.054887Jy sigma=0.470088 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8871 mas, bmaj=1.836 mas, bpa=-4.906 degrees ! Estimated noise=0.503833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000488605 Jy ! Component: 100 - total flux cleaned = -0.000265661 Jy ! Component: 150 - total flux cleaned = 2.51231e-05 Jy ! Component: 200 - total flux cleaned = 0.000253171 Jy ! Total flux subtracted in 200 components = 0.000253171 Jy ! Clean residual min=-0.001341 max=0.001269 Jy/beam ! Clean residual mean=0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.224603 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 121 components and 0.224603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054843Jy sigma=0.469699 ! Fit after self-cal, rms=0.054840Jy sigma=0.469661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.26182e-05 Jy ! Component: 100 - total flux cleaned = 0.00027509 Jy ! Component: 150 - total flux cleaned = 0.000413246 Jy ! Component: 200 - total flux cleaned = 0.000520748 Jy ! Total flux subtracted in 200 components = 0.000520748 Jy ! Clean residual min=-0.001260 max=0.001260 Jy/beam ! Clean residual mean=0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.225124 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 127 components and 0.225124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054820Jy sigma=0.469487 ! Fit after self-cal, rms=0.054818Jy sigma=0.469478 ! Inverting map ! Added new window around map position (12.2, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656539 Jy ! Component: 100 - total flux cleaned = 0.000763231 Jy ! Component: 150 - total flux cleaned = 0.000919521 Jy ! Component: 200 - total flux cleaned = 0.00106671 Jy ! Total flux subtracted in 200 components = 0.00106671 Jy ! Clean residual min=-0.001134 max=0.001083 Jy/beam ! Clean residual mean=0.000001 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.226191 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 140 components and 0.226191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054790Jy sigma=0.469223 ! Fit after self-cal, rms=0.054788Jy sigma=0.469215 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054788Jy sigma=0.469215 ! Fit after self-cal, rms=0.054673Jy sigma=0.469145 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8864 mas, bmaj=1.835 mas, bpa=-4.966 degrees ! Estimated noise=0.503285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365517 Jy ! Component: 100 - total flux cleaned = -0.000212767 Jy ! Component: 150 - total flux cleaned = -9.23056e-05 Jy ! Component: 200 - total flux cleaned = -1.6958e-05 Jy ! Total flux subtracted in 200 components = -1.6958e-05 Jy ! Clean residual min=-0.001129 max=0.001031 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.226174 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 151 components and 0.226174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054657Jy sigma=0.469006 ! Fit after self-cal, rms=0.054655Jy sigma=0.468999 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.94544e-06 Jy ! Component: 100 - total flux cleaned = 6.29478e-05 Jy ! Component: 150 - total flux cleaned = 0.000114808 Jy ! Component: 200 - total flux cleaned = 0.000197858 Jy ! Total flux subtracted in 200 components = 0.000197858 Jy ! Clean residual min=-0.001080 max=0.001013 Jy/beam ! Clean residual mean=0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.226371 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 156 components and 0.226371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054645Jy sigma=0.468910 ! Fit after self-cal, rms=0.054644Jy sigma=0.468907 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054644Jy sigma=0.468907 ! Fit after self-cal, rms=0.054593Jy sigma=0.468890 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=2.95 mas, bpa=-1.475 degrees ! Estimated noise=0.640482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036877 Jy ! Component: 100 - total flux cleaned = 0.000508344 Jy ! Component: 150 - total flux cleaned = 0.000621503 Jy ! Component: 200 - total flux cleaned = 0.000722932 Jy ! Total flux subtracted in 200 components = 0.000722932 Jy ! Clean residual min=-0.001100 max=0.001189 Jy/beam ! Clean residual mean=0.000002 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.227094 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 172 components and 0.227094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054588Jy sigma=0.468834 ! Fit after self-cal, rms=0.054586Jy sigma=0.468827 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.24372e-05 Jy ! Component: 100 - total flux cleaned = 0.000108787 Jy ! Component: 150 - total flux cleaned = 0.000136239 Jy ! Component: 200 - total flux cleaned = 0.000148917 Jy ! Total flux subtracted in 200 components = 0.000148917 Jy ! Clean residual min=-0.001048 max=0.001125 Jy/beam ! Clean residual mean=0.000002 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.227243 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 182 components and 0.227243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054585Jy sigma=0.468810 ! Fit after self-cal, rms=0.054585Jy sigma=0.468806 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.886 mas, bmaj=1.835 mas, bpa=-4.977 degrees ! Estimated noise=0.503107 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.886 x 1.835 at -4.977 degrees (North through East) ! Clean map min=-0.0010952 max=0.14901 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6967 mas, bmaj=1.532 mas, bpa=-7.278 degrees ! Estimated noise=0.95616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116568 Jy ! Component: 100 - total flux cleaned = 0.147097 Jy ! Component: 150 - total flux cleaned = 0.163904 Jy ! Component: 200 - total flux cleaned = 0.174896 Jy ! Total flux subtracted in 200 components = 0.174896 Jy ! Clean residual min=-0.003994 max=0.006075 Jy/beam ! Clean residual mean=-0.000001 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.174896 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.174896 Jy ! Inverting map and beam ! Estimated beam: bmin=0.886 mas, bmaj=1.835 mas, bpa=-4.977 degrees ! Estimated noise=0.503107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106414 Jy ! Component: 100 - total flux cleaned = 0.0178766 Jy ! Component: 150 - total flux cleaned = 0.0234286 Jy ! Component: 200 - total flux cleaned = 0.0278937 Jy ! Total flux subtracted in 200 components = 0.0278937 Jy ! Clean residual min=-0.002324 max=0.002925 Jy/beam ! Clean residual mean=0.000000 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.202789 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 50 components and 0.202789 Jy ! Inverting map ! Added new window around map position (-10.2, -14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376746 Jy ! Component: 100 - total flux cleaned = 0.00647241 Jy ! Component: 150 - total flux cleaned = 0.00849719 Jy ! Component: 200 - total flux cleaned = 0.0104913 Jy ! Total flux subtracted in 200 components = 0.0104913 Jy ! Clean residual min=-0.001736 max=0.001989 Jy/beam ! Clean residual mean=0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.213281 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 78 components and 0.213281 Jy ! Inverting map ! Added new window around map position (-2.6, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186015 Jy ! Component: 100 - total flux cleaned = 0.00329686 Jy ! Component: 150 - total flux cleaned = 0.00465666 Jy ! Component: 200 - total flux cleaned = 0.00588045 Jy ! Total flux subtracted in 200 components = 0.00588045 Jy ! Clean residual min=-0.001452 max=0.001592 Jy/beam ! Clean residual mean=0.000001 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.219161 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 94 components and 0.219161 Jy ! Inverting map ! Added new window around map position (16.2, -19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143564 Jy ! Component: 100 - total flux cleaned = 0.00233891 Jy ! Component: 150 - total flux cleaned = 0.00315843 Jy ! Component: 200 - total flux cleaned = 0.00390692 Jy ! Total flux subtracted in 200 components = 0.00390692 Jy ! Clean residual min=-0.001308 max=0.001311 Jy/beam ! Clean residual mean=0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.223068 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 112 components and 0.223068 Jy ! Inverting map ! Added new window around map position (38.8, 46.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971571 Jy ! Component: 100 - total flux cleaned = 0.00143057 Jy ! Component: 150 - total flux cleaned = 0.00189467 Jy ! Component: 200 - total flux cleaned = 0.00233087 Jy ! Total flux subtracted in 200 components = 0.00233087 Jy ! Clean residual min=-0.001176 max=0.001056 Jy/beam ! Clean residual mean=0.000001 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.225399 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 132 components and 0.225399 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=2.95 mas, bpa=-1.475 degrees ! Estimated noise=0.640482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131128 Jy ! Component: 100 - total flux cleaned = 0.00195368 Jy ! Component: 150 - total flux cleaned = 0.00254082 Jy ! Component: 200 - total flux cleaned = 0.00296879 Jy ! Total flux subtracted in 200 components = 0.00296879 Jy ! Clean residual min=-0.001074 max=0.000985 Jy/beam ! Clean residual mean=0.000001 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.228368 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308135 Jy ! Component: 100 - total flux cleaned = 0.000607071 Jy ! Component: 150 - total flux cleaned = 0.000840596 Jy ! Component: 200 - total flux cleaned = 0.00102068 Jy ! Total flux subtracted in 200 components = 0.00102068 Jy ! Clean residual min=-0.001105 max=0.000983 Jy/beam ! Clean residual mean=0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.229388 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 176 components and 0.229388 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.886 mas, bmaj=1.835 mas, bpa=-4.977 degrees ! Estimated noise=0.503107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275251 Jy ! Component: 100 - total flux cleaned = -0.00029958 Jy ! Component: 150 - total flux cleaned = -0.000396289 Jy ! Component: 200 - total flux cleaned = -0.000374542 Jy ! Total flux subtracted in 200 components = -0.000374542 Jy ! Clean residual min=-0.000929 max=0.000887 Jy/beam ! Clean residual mean=0.000001 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.229014 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 195 components and 0.229014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054560Jy sigma=0.468590 ! Fit after self-cal, rms=0.054554Jy sigma=0.468538 wmodel J1209+2547_X_map.mod ! Writing 195 model components to file: J1209+2547_X_map.mod wobs J1209+2547_X_uvs.fits ! Writing UV FITS file: J1209+2547_X_uvs.fits wwins J1209+2547_X_map.win ! wwins: Wrote 11 windows to J1209+2547_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425109 Jy ! Component: 100 - total flux cleaned = -0.00060467 Jy ! Component: 150 - total flux cleaned = -0.00072966 Jy ! Component: 200 - total flux cleaned = -0.000819931 Jy ! Component: 250 - total flux cleaned = -0.000922693 Jy ! Component: 300 - total flux cleaned = -0.000951637 Jy ! Component: 350 - total flux cleaned = -0.0010363 Jy ! Component: 400 - total flux cleaned = -0.00100819 Jy ! Component: 450 - total flux cleaned = -0.0010219 Jy ! Component: 500 - total flux cleaned = -0.00106207 Jy ! Component: 550 - total flux cleaned = -0.00106187 Jy ! Component: 600 - total flux cleaned = -0.00106177 Jy ! Component: 650 - total flux cleaned = -0.00103575 Jy ! Component: 700 - total flux cleaned = -0.00102323 Jy ! Component: 750 - total flux cleaned = -0.00103594 Jy ! Component: 800 - total flux cleaned = -0.00101092 Jy ! Component: 850 - total flux cleaned = -0.00099876 Jy ! Component: 900 - total flux cleaned = -0.00102298 Jy ! Component: 950 - total flux cleaned = -0.00103486 Jy ! Component: 1000 - total flux cleaned = -0.00101149 Jy ! Component: 1050 - total flux cleaned = -0.00102332 Jy ! Component: 1100 - total flux cleaned = -0.00103486 Jy ! Component: 1150 - total flux cleaned = -0.00102328 Jy ! Component: 1200 - total flux cleaned = -0.00102335 Jy ! Component: 1250 - total flux cleaned = -0.000989656 Jy ! Component: 1300 - total flux cleaned = -0.00100093 Jy ! Component: 1350 - total flux cleaned = -0.00102293 Jy ! Component: 1400 - total flux cleaned = -0.00101192 Jy ! Component: 1450 - total flux cleaned = -0.00106597 Jy ! Component: 1500 - total flux cleaned = -0.00110873 Jy ! Component: 1550 - total flux cleaned = -0.00111942 Jy ! Component: 1600 - total flux cleaned = -0.00116142 Jy ! Component: 1650 - total flux cleaned = -0.00116146 Jy ! Component: 1700 - total flux cleaned = -0.00120275 Jy ! Component: 1750 - total flux cleaned = -0.00121293 Jy ! Component: 1800 - total flux cleaned = -0.00124347 Jy ! Component: 1850 - total flux cleaned = -0.0013139 Jy ! Component: 1900 - total flux cleaned = -0.00133395 Jy ! Component: 1950 - total flux cleaned = -0.00135374 Jy ! Component: 2000 - total flux cleaned = -0.00138313 Jy ! Component: 2050 - total flux cleaned = -0.00135381 Jy ! Component: 2100 - total flux cleaned = -0.00137314 Jy ! Component: 2150 - total flux cleaned = -0.0013828 Jy ! Component: 2200 - total flux cleaned = -0.00139242 Jy ! Component: 2250 - total flux cleaned = -0.00143048 Jy ! Component: 2300 - total flux cleaned = -0.0014399 Jy ! Component: 2350 - total flux cleaned = -0.00144918 Jy ! Component: 2400 - total flux cleaned = -0.00142145 Jy ! Component: 2450 - total flux cleaned = -0.00144904 Jy ! Component: 2500 - total flux cleaned = -0.00148549 Jy ! Component: 2550 - total flux cleaned = -0.00144933 Jy ! Component: 2600 - total flux cleaned = -0.00144042 Jy ! Component: 2650 - total flux cleaned = -0.00146716 Jy ! Component: 2700 - total flux cleaned = -0.00148484 Jy ! Component: 2750 - total flux cleaned = -0.00148482 Jy ! Component: 2800 - total flux cleaned = -0.00151096 Jy ! Component: 2850 - total flux cleaned = -0.00145017 Jy ! Component: 2900 - total flux cleaned = -0.00148469 Jy ! Component: 2950 - total flux cleaned = -0.00151049 Jy ! Component: 3000 - total flux cleaned = -0.00151898 Jy ! Component: 3050 - total flux cleaned = -0.00156121 Jy ! Component: 3100 - total flux cleaned = -0.00157806 Jy ! Component: 3150 - total flux cleaned = -0.00153624 Jy ! Component: 3200 - total flux cleaned = -0.00157781 Jy ! Component: 3250 - total flux cleaned = -0.00154476 Jy ! Component: 3300 - total flux cleaned = -0.0015858 Jy ! Component: 3350 - total flux cleaned = -0.00159387 Jy ! Component: 3400 - total flux cleaned = -0.00156968 Jy ! Component: 3450 - total flux cleaned = -0.00162607 Jy ! Component: 3500 - total flux cleaned = -0.00165815 Jy ! Component: 3550 - total flux cleaned = -0.00161838 Jy ! Component: 3600 - total flux cleaned = -0.00162628 Jy ! Component: 3650 - total flux cleaned = -0.00167347 Jy ! Component: 3700 - total flux cleaned = -0.00165783 Jy ! Component: 3750 - total flux cleaned = -0.00168104 Jy ! Component: 3800 - total flux cleaned = -0.00170419 Jy ! Component: 3850 - total flux cleaned = -0.00173502 Jy ! Component: 3900 - total flux cleaned = -0.00171968 Jy ! Component: 3950 - total flux cleaned = -0.00170444 Jy ! Component: 4000 - total flux cleaned = -0.00171201 Jy ! Component: 4050 - total flux cleaned = -0.00172708 Jy ! Total flux subtracted in 4096 components = -0.0017645 Jy ! Clean residual min=-0.000399 max=0.000497 Jy/beam ! Clean residual mean=0.000000 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.227249 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 517 components and 0.227249 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1209+2547_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.886 x 1.835 at -4.977 degrees (North through East) ! Clean map min=-0.00061507 max=0.14891 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1209+2547_X_map.fits wmodel /image_prod/ug002_uva//J1209+2547_X_map.mod ! Writing 517 model components to file: /image_prod/ug002_uva//J1209+2547_X_map.mod wobs /image_prod/ug002_uva//J1209+2547_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1209+2547_X_uvs.fits wwins /image_prod/ug002_uva//J1209+2547_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J1209+2547_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.148908 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000128603 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259094 0.259094 0.518188 1.03638 2.07275 4.1455 8.291 16.582 33.164 66.328 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.148 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1157.88 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1209+2547_X_dfm.log closed on Thu Mar 5 00:26:52 2020