! Started logfile: /image_prod/ug002_uva//J1159+2914_X_dfm.log on Thu Mar 5 00:20:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1159+2914_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1159+2914_X_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.746914 visibilities/baseline/integration-bin. ! Found source: J1159+2914 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7260 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1159+2914_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.426908Jy sigma=8.222046 ! Fit after self-cal, rms=1.229573Jy sigma=4.110359 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7081 mas, bmaj=1.498 mas, bpa=-7.95 degrees ! Estimated noise=3.49338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6829 Jy ! Component: 100 - total flux cleaned = 2.06211 Jy ! Total flux subtracted in 100 components = 2.06211 Jy ! Clean residual min=-0.059875 max=0.133564 Jy/beam ! Clean residual mean=0.000025 rms=0.012648 Jy/beam ! Combined flux in latest and established models = 2.06211 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 2.06211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.313187Jy sigma=1.031267 ! Fit after self-cal, rms=0.313159Jy sigma=1.031077 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134216 Jy ! Component: 100 - total flux cleaned = 0.157746 Jy ! Total flux subtracted in 100 components = 0.157746 Jy ! Clean residual min=-0.045908 max=0.071893 Jy/beam ! Clean residual mean=0.000018 rms=0.010233 Jy/beam ! Combined flux in latest and established models = 2.21985 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 2.21985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.252695Jy sigma=0.839941 ! Fit after self-cal, rms=0.252439Jy sigma=0.839130 ! Inverting map ! Added new window around map position (1.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0642096 Jy ! Component: 100 - total flux cleaned = 0.0759124 Jy ! Total flux subtracted in 100 components = 0.0759124 Jy ! Clean residual min=-0.044263 max=0.057509 Jy/beam ! Clean residual mean=0.000017 rms=0.009377 Jy/beam ! Combined flux in latest and established models = 2.29577 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 2.29577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229646Jy sigma=0.766563 ! Fit after self-cal, rms=0.227886Jy sigma=0.759827 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8689 mas, bmaj=1.752 mas, bpa=-7.547 degrees ! Estimated noise=2.56926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0671252 Jy ! Component: 100 - total flux cleaned = 0.110704 Jy ! Component: 150 - total flux cleaned = 0.136839 Jy ! Component: 200 - total flux cleaned = 0.144232 Jy ! Total flux subtracted in 200 components = 0.144232 Jy ! Clean residual min=-0.047044 max=0.043493 Jy/beam ! Clean residual mean=0.000013 rms=0.009188 Jy/beam ! Combined flux in latest and established models = 2.44 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 42 components and 2.44 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200803Jy sigma=0.677811 ! Fit after self-cal, rms=0.200291Jy sigma=0.675941 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8689 x 1.752 at -7.547 degrees (North through East) ! Clean map min=-0.042827 max=2.1466 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.02 KP 1.09 ! LA 1.05 MK 1.00 NL 1.11 OV 0.95 ! PT 0.91 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.00 KP 1.07 ! LA 1.05 MK 1.00 NL 1.11 OV 0.97 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 0.98 KP 1.08 ! LA 1.08 MK 0.98 NL 1.10 OV 0.95 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.93 HN 1.01 KP 1.08 ! LA 1.05 MK 1.03 NL 1.10 OV 0.97 ! PT 0.93 SC 0.93 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 1.00 KP 1.08 ! LA 1.05 MK 1.00 NL 1.09 OV 0.96 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.00 KP 1.09 ! LA 1.06 MK 0.98 NL 1.09 OV 0.98 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.92 HN 0.99 KP 1.08 ! LA 1.06 MK 1.00 NL 1.09 OV 0.99 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.00 KP 1.10 ! LA 1.04 MK 0.99 NL 1.10 OV 0.96 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 0.99 KP 1.07 ! LA 1.04 MK 1.03 NL 1.11 OV 0.97 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 1.02 KP 1.06 ! LA 1.06 MK 1.01 NL 1.10 OV 0.97 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.91 HN 1.00 KP 1.09 ! LA 1.05 MK 1.00 NL 1.08 OV 0.96 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 HN 1.02 KP 1.07 ! LA 1.06 MK 1.01 NL 1.10 OV 0.98 ! PT 0.95 SC 0.94 ! ! ! Fit before self-cal, rms=0.200291Jy sigma=0.675941 ! Fit after self-cal, rms=0.100483Jy sigma=0.336705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8648 mas, bmaj=1.743 mas, bpa=-7.009 degrees ! Estimated noise=2.58073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.014759 Jy ! Component: 100 - total flux cleaned = -0.0221607 Jy ! Component: 150 - total flux cleaned = -0.0278867 Jy ! Component: 200 - total flux cleaned = -0.0329327 Jy ! Total flux subtracted in 200 components = -0.0329327 Jy ! Clean residual min=-0.017001 max=0.018925 Jy/beam ! Clean residual mean=0.000002 rms=0.003428 Jy/beam ! Combined flux in latest and established models = 2.40707 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 70 components and 2.40706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092142Jy sigma=0.309641 ! Fit after self-cal, rms=0.091871Jy sigma=0.308809 ! Inverting map ! Added new window around map position (9.6, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113639 Jy ! Component: 100 - total flux cleaned = 0.0100042 Jy ! Component: 150 - total flux cleaned = 0.00803871 Jy ! Component: 200 - total flux cleaned = 0.00627657 Jy ! Total flux subtracted in 200 components = 0.00627657 Jy ! Clean residual min=-0.015793 max=0.013496 Jy/beam ! Clean residual mean=0.000000 rms=0.003129 Jy/beam ! Combined flux in latest and established models = 2.41334 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 80 components and 2.41334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087703Jy sigma=0.293086 ! Fit after self-cal, rms=0.087535Jy sigma=0.292386 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087535Jy sigma=0.292386 ! Fit after self-cal, rms=0.078922Jy sigma=0.255232 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8642 mas, bmaj=1.747 mas, bpa=-7.004 degrees ! Estimated noise=2.58215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0148912 Jy ! Component: 100 - total flux cleaned = -0.0167937 Jy ! Component: 150 - total flux cleaned = -0.0196624 Jy ! Component: 200 - total flux cleaned = -0.0224253 Jy ! Total flux subtracted in 200 components = -0.0224253 Jy ! Clean residual min=-0.010434 max=0.009135 Jy/beam ! Clean residual mean=-0.000004 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 2.39092 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 96 components and 2.39092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074842Jy sigma=0.242668 ! Fit after self-cal, rms=0.074797Jy sigma=0.242516 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195262 Jy ! Component: 100 - total flux cleaned = -0.00414682 Jy ! Component: 150 - total flux cleaned = -0.00533967 Jy ! Component: 200 - total flux cleaned = -0.00699459 Jy ! Total flux subtracted in 200 components = -0.00699459 Jy ! Clean residual min=-0.010321 max=0.008771 Jy/beam ! Clean residual mean=-0.000004 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 2.38392 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 2.38392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073737Jy sigma=0.238933 ! Fit after self-cal, rms=0.073712Jy sigma=0.238852 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073712Jy sigma=0.238852 ! Fit after self-cal, rms=0.072267Jy sigma=0.234530 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8638 mas, bmaj=1.747 mas, bpa=-6.957 degrees ! Estimated noise=2.58257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00857551 Jy ! Component: 100 - total flux cleaned = -0.00986728 Jy ! Component: 150 - total flux cleaned = -0.0113511 Jy ! Component: 200 - total flux cleaned = -0.0130425 Jy ! Total flux subtracted in 200 components = -0.0130425 Jy ! Clean residual min=-0.009088 max=0.007753 Jy/beam ! Clean residual mean=-0.000005 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 2.37088 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 2.37088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070371Jy sigma=0.228658 ! Fit after self-cal, rms=0.070355Jy sigma=0.228604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00154495 Jy ! Component: 100 - total flux cleaned = -0.00261425 Jy ! Component: 150 - total flux cleaned = -0.0036062 Jy ! Component: 200 - total flux cleaned = -0.00453235 Jy ! Total flux subtracted in 200 components = -0.00453235 Jy ! Clean residual min=-0.008724 max=0.007610 Jy/beam ! Clean residual mean=-0.000005 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 2.36635 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 120 components and 2.36635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069816Jy sigma=0.226732 ! Fit after self-cal, rms=0.069801Jy sigma=0.226696 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069801Jy sigma=0.226696 ! Fit after self-cal, rms=0.068959Jy sigma=0.224458 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.076 mas, bmaj=2.785 mas, bpa=-2.618 degrees ! Estimated noise=3.51664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00773171 Jy ! Component: 100 - total flux cleaned = -0.0109736 Jy ! Component: 150 - total flux cleaned = -0.0134614 Jy ! Component: 200 - total flux cleaned = -0.0152408 Jy ! Total flux subtracted in 200 components = -0.0152408 Jy ! Clean residual min=-0.010679 max=0.009022 Jy/beam ! Clean residual mean=-0.000015 rms=0.002588 Jy/beam ! Combined flux in latest and established models = 2.35111 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 134 components and 2.35111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068334Jy sigma=0.222879 ! Fit after self-cal, rms=0.068281Jy sigma=0.222660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000939582 Jy ! Component: 100 - total flux cleaned = -0.00220338 Jy ! Component: 150 - total flux cleaned = -0.00296743 Jy ! Component: 200 - total flux cleaned = -0.00354918 Jy ! Total flux subtracted in 200 components = -0.00354918 Jy ! Clean residual min=-0.010427 max=0.008974 Jy/beam ! Clean residual mean=-0.000015 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 2.34756 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 144 components and 2.34756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068217Jy sigma=0.222511 ! Fit after self-cal, rms=0.068194Jy sigma=0.222437 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8633 mas, bmaj=1.747 mas, bpa=-6.913 degrees ! Estimated noise=2.58284 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8633 x 1.747 at -6.913 degrees (North through East) ! Clean map min=-0.0097493 max=2.1647 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068194Jy sigma=0.222437 ! Fit after self-cal, rms=0.065154Jy sigma=0.205135 ! Inverting map and beam ! Estimated beam: bmin=0.8637 mas, bmaj=1.747 mas, bpa=-6.894 degrees ! Estimated noise=2.58517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00313549 Jy ! Component: 100 - total flux cleaned = -0.00403469 Jy ! Component: 150 - total flux cleaned = -0.00450919 Jy ! Component: 200 - total flux cleaned = -0.00464989 Jy ! Total flux subtracted in 200 components = -0.00464989 Jy ! Clean residual min=-0.007520 max=0.006490 Jy/beam ! Clean residual mean=-0.000005 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 2.34291 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 153 components and 2.34291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064302Jy sigma=0.202052 ! Fit after self-cal, rms=0.064284Jy sigma=0.201996 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000586776 Jy ! Component: 100 - total flux cleaned = -0.000706486 Jy ! Component: 150 - total flux cleaned = -0.00081706 Jy ! Component: 200 - total flux cleaned = -0.000816597 Jy ! Total flux subtracted in 200 components = -0.000816597 Jy ! Clean residual min=-0.007280 max=0.006473 Jy/beam ! Clean residual mean=-0.000005 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 2.34209 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 160 components and 2.34209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063909Jy sigma=0.200699 ! Fit after self-cal, rms=0.063900Jy sigma=0.200679 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063900Jy sigma=0.200679 ! Fit after self-cal, rms=0.063520Jy sigma=0.199774 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.703 mas, bmaj=1.488 mas, bpa=-7.076 degrees ! Estimated noise=3.50082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.68385 Jy ! Component: 100 - total flux cleaned = 2.06185 Jy ! Component: 150 - total flux cleaned = 2.19065 Jy ! Component: 200 - total flux cleaned = 2.24624 Jy ! Total flux subtracted in 200 components = 2.24624 Jy ! Clean residual min=-0.017053 max=0.025903 Jy/beam ! Clean residual mean=0.000003 rms=0.003045 Jy/beam ! Combined flux in latest and established models = 2.24624 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.24624 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8632 mas, bmaj=1.747 mas, bpa=-6.856 degrees ! Estimated noise=2.5852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357708 Jy ! Component: 100 - total flux cleaned = 0.0582211 Jy ! Component: 150 - total flux cleaned = 0.0723234 Jy ! Component: 200 - total flux cleaned = 0.0763263 Jy ! Total flux subtracted in 200 components = 0.0763263 Jy ! Clean residual min=-0.009352 max=0.009870 Jy/beam ! Clean residual mean=-0.000007 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 2.32257 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 37 components and 2.32257 Jy ! Inverting map ! Added new window around map position (-0.2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443095 Jy ! Component: 100 - total flux cleaned = 0.00636512 Jy ! Component: 150 - total flux cleaned = 0.00774771 Jy ! Component: 200 - total flux cleaned = 0.00899142 Jy ! Total flux subtracted in 200 components = 0.00899142 Jy ! Clean residual min=-0.007291 max=0.007540 Jy/beam ! Clean residual mean=-0.000006 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 2.33156 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 2.33156 Jy ! Inverting map ! Added new window around map position (7.4, 11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433535 Jy ! Component: 100 - total flux cleaned = 0.00539817 Jy ! Component: 150 - total flux cleaned = 0.00712501 Jy ! Component: 200 - total flux cleaned = 0.00827353 Jy ! Total flux subtracted in 200 components = 0.00827353 Jy ! Clean residual min=-0.006953 max=0.007273 Jy/beam ! Clean residual mean=-0.000006 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 2.33983 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 66 components and 2.33983 Jy ! Inverting map ! Added new window around map position (0.8, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563316 Jy ! Component: 100 - total flux cleaned = 0.00876511 Jy ! Component: 150 - total flux cleaned = 0.0106179 Jy ! Component: 200 - total flux cleaned = 0.0119748 Jy ! Total flux subtracted in 200 components = 0.0119748 Jy ! Clean residual min=-0.006626 max=0.006798 Jy/beam ! Clean residual mean=-0.000005 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 2.35181 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 79 components and 2.35181 Jy ! Inverting map ! Added new window around map position (-6.2, -29.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386702 Jy ! Component: 100 - total flux cleaned = 0.00479054 Jy ! Component: 150 - total flux cleaned = 0.00549107 Jy ! Component: 200 - total flux cleaned = 0.00631924 Jy ! Total flux subtracted in 200 components = 0.00631924 Jy ! Clean residual min=-0.006346 max=0.005987 Jy/beam ! Clean residual mean=-0.000005 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 2.35813 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 96 components and 2.35813 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.077 mas, bmaj=2.786 mas, bpa=-2.494 degrees ! Estimated noise=3.51995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174023 Jy ! Component: 100 - total flux cleaned = 0.00175914 Jy ! Component: 150 - total flux cleaned = 0.00176272 Jy ! Component: 200 - total flux cleaned = 0.00190648 Jy ! Total flux subtracted in 200 components = 0.00190648 Jy ! Clean residual min=-0.007432 max=0.007143 Jy/beam ! Clean residual mean=-0.000011 rms=0.002038 Jy/beam ! Combined flux in latest and established models = 2.36004 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.15283e-06 Jy ! Component: 100 - total flux cleaned = 0.000119259 Jy ! Component: 150 - total flux cleaned = 0.000121372 Jy ! Component: 200 - total flux cleaned = 0.000441531 Jy ! Total flux subtracted in 200 components = 0.000441531 Jy ! Clean residual min=-0.007307 max=0.006960 Jy/beam ! Clean residual mean=-0.000009 rms=0.001974 Jy/beam ! Combined flux in latest and established models = 2.36048 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 122 components and 2.36048 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8632 mas, bmaj=1.747 mas, bpa=-6.856 degrees ! Estimated noise=2.5852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041738 Jy ! Component: 100 - total flux cleaned = 0.000841859 Jy ! Component: 150 - total flux cleaned = 0.00136858 Jy ! Component: 200 - total flux cleaned = 0.00149504 Jy ! Total flux subtracted in 200 components = 0.00149504 Jy ! Clean residual min=-0.005822 max=0.005814 Jy/beam ! Clean residual mean=-0.000004 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 2.36197 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 138 components and 2.36197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061669Jy sigma=0.194386 ! Fit after self-cal, rms=0.061431Jy sigma=0.193382 wmodel J1159+2914_X_map.mod ! Writing 138 model components to file: J1159+2914_X_map.mod wobs J1159+2914_X_uvs.fits ! Writing UV FITS file: J1159+2914_X_uvs.fits wwins J1159+2914_X_map.win ! wwins: Wrote 8 windows to J1159+2914_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106681 Jy ! Component: 100 - total flux cleaned = -0.00165678 Jy ! Component: 150 - total flux cleaned = -0.00203259 Jy ! Component: 200 - total flux cleaned = -0.00221393 Jy ! Component: 250 - total flux cleaned = -0.00221539 Jy ! Component: 300 - total flux cleaned = -0.00221501 Jy ! Component: 350 - total flux cleaned = -0.00221356 Jy ! Component: 400 - total flux cleaned = -0.00205569 Jy ! Component: 450 - total flux cleaned = -0.00205605 Jy ! Component: 500 - total flux cleaned = -0.00190337 Jy ! Component: 550 - total flux cleaned = -0.00146224 Jy ! Component: 600 - total flux cleaned = -0.00146473 Jy ! Component: 650 - total flux cleaned = -0.0013211 Jy ! Component: 700 - total flux cleaned = -0.000903742 Jy ! Component: 750 - total flux cleaned = -0.00063239 Jy ! Component: 800 - total flux cleaned = -0.000634765 Jy ! Component: 850 - total flux cleaned = -0.000634005 Jy ! Component: 900 - total flux cleaned = -0.00056841 Jy ! Component: 950 - total flux cleaned = -0.000249652 Jy ! Component: 1000 - total flux cleaned = -6.11485e-05 Jy ! Component: 1050 - total flux cleaned = 0.000123506 Jy ! Component: 1100 - total flux cleaned = 0.000307192 Jy ! Component: 1150 - total flux cleaned = 0.000308097 Jy ! Component: 1200 - total flux cleaned = 0.000664055 Jy ! Component: 1250 - total flux cleaned = 0.000722287 Jy ! Component: 1300 - total flux cleaned = 0.000952182 Jy ! Component: 1350 - total flux cleaned = 0.000839194 Jy ! Component: 1400 - total flux cleaned = 0.00111906 Jy ! Component: 1450 - total flux cleaned = 0.0012859 Jy ! Component: 1500 - total flux cleaned = 0.00117637 Jy ! Component: 1550 - total flux cleaned = 0.00139169 Jy ! Component: 1600 - total flux cleaned = 0.00133766 Jy ! Component: 1650 - total flux cleaned = 0.00128404 Jy ! Component: 1700 - total flux cleaned = 0.00117972 Jy ! Component: 1750 - total flux cleaned = 0.00117899 Jy ! Component: 1800 - total flux cleaned = 0.00107726 Jy ! Component: 1850 - total flux cleaned = 0.000976945 Jy ! Component: 1900 - total flux cleaned = 0.000928026 Jy ! Component: 1950 - total flux cleaned = 0.000976393 Jy ! Component: 2000 - total flux cleaned = 0.000976533 Jy ! Component: 2050 - total flux cleaned = 0.000929225 Jy ! Component: 2100 - total flux cleaned = 0.00102344 Jy ! Component: 2150 - total flux cleaned = 0.000649425 Jy ! Component: 2200 - total flux cleaned = 0.000696031 Jy ! Component: 2250 - total flux cleaned = 0.000787108 Jy ! Component: 2300 - total flux cleaned = 0.000515195 Jy ! Component: 2350 - total flux cleaned = 0.000694488 Jy ! Component: 2400 - total flux cleaned = 0.000738369 Jy ! Component: 2450 - total flux cleaned = 0.000782604 Jy ! Component: 2500 - total flux cleaned = 0.000608328 Jy ! Component: 2550 - total flux cleaned = 0.000694176 Jy ! Component: 2600 - total flux cleaned = 0.000821725 Jy ! Component: 2650 - total flux cleaned = 0.000737258 Jy ! Component: 2700 - total flux cleaned = 0.000736816 Jy ! Component: 2750 - total flux cleaned = 0.000901926 Jy ! Component: 2800 - total flux cleaned = 0.00102449 Jy ! Component: 2850 - total flux cleaned = 0.000944174 Jy ! Component: 2900 - total flux cleaned = 0.00118396 Jy ! Component: 2950 - total flux cleaned = 0.00126275 Jy ! Component: 3000 - total flux cleaned = 0.00122262 Jy ! Component: 3050 - total flux cleaned = 0.00137813 Jy ! Component: 3100 - total flux cleaned = 0.0013782 Jy ! Component: 3150 - total flux cleaned = 0.00134032 Jy ! Component: 3200 - total flux cleaned = 0.00145468 Jy ! Component: 3250 - total flux cleaned = 0.00164125 Jy ! Component: 3300 - total flux cleaned = 0.00160378 Jy ! Component: 3350 - total flux cleaned = 0.00167783 Jy ! Component: 3400 - total flux cleaned = 0.00178687 Jy ! Component: 3450 - total flux cleaned = 0.0019309 Jy ! Component: 3500 - total flux cleaned = 0.00207334 Jy ! Component: 3550 - total flux cleaned = 0.00193171 Jy ! Component: 3600 - total flux cleaned = 0.00200219 Jy ! Component: 3650 - total flux cleaned = 0.00217627 Jy ! Component: 3700 - total flux cleaned = 0.00214161 Jy ! Component: 3750 - total flux cleaned = 0.00207333 Jy ! Component: 3800 - total flux cleaned = 0.00210727 Jy ! Component: 3850 - total flux cleaned = 0.00227522 Jy ! Component: 3900 - total flux cleaned = 0.00250791 Jy ! Component: 3950 - total flux cleaned = 0.00240881 Jy ! Component: 4000 - total flux cleaned = 0.00247454 Jy ! Component: 4050 - total flux cleaned = 0.00244244 Jy ! Total flux subtracted in 4096 components = 0.00253862 Jy ! Clean residual min=-0.001601 max=0.001601 Jy/beam ! Clean residual mean=-0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 2.36451 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 469 components and 2.36451 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1159+2914_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8632 x 1.747 at -6.856 degrees (North through East) ! Clean map min=-0.0069611 max=2.1724 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1159+2914_X_map.fits wmodel /image_prod/ug002_uva//J1159+2914_X_map.mod ! Writing 469 model components to file: /image_prod/ug002_uva//J1159+2914_X_map.mod wobs /image_prod/ug002_uva//J1159+2914_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1159+2914_X_uvs.fits wwins /image_prod/ug002_uva//J1159+2914_X_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J1159+2914_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.17239 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000557657 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0770107 0.0770107 0.154021 0.308043 0.616086 1.23217 2.46434 4.92869 9.85737 19.7147 39.4295 78.859 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.172 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3895.56 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1159+2914_X_dfm.log closed on Thu Mar 5 00:20:50 2020