! Started logfile: /image_prod/ug002_uva//J1156+7306_X_a_dfm.log on Thu Mar 5 00:19:07 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1156+7306_X_a_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1156+7306_X_a_uva.fits ! AN table 1: 200 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.894111 visibilities/baseline/integration-bin. ! Found source: J1156+7306 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 96564 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1156+7306_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004298Jy sigma=8.947933 ! Fit after self-cal, rms=0.935170Jy sigma=8.331999 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7701 mas, bmaj=0.8327 mas, bpa=-20.01 degrees ! Estimated noise=0.662516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0470832 Jy ! Component: 100 - total flux cleaned = 0.0609718 Jy ! Total flux subtracted in 100 components = 0.0609718 Jy ! Clean residual min=-0.002816 max=0.006023 Jy/beam ! Clean residual mean=-0.000002 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0609718 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0609718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061519Jy sigma=0.520013 ! Fit after self-cal, rms=0.060906Jy sigma=0.514535 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709668 Jy ! Component: 100 - total flux cleaned = 0.0107939 Jy ! Total flux subtracted in 100 components = 0.0107939 Jy ! Clean residual min=-0.002570 max=0.005716 Jy/beam ! Clean residual mean=-0.000001 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0717657 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.0717657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059872Jy sigma=0.505572 ! Fit after self-cal, rms=0.059868Jy sigma=0.505429 ! Inverting map ! Added new window around map position (-12.8, -21.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608607 Jy ! Component: 100 - total flux cleaned = 0.00959378 Jy ! Total flux subtracted in 100 components = 0.00959378 Jy ! Clean residual min=-0.002374 max=0.003003 Jy/beam ! Clean residual mean=-0.000001 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0813595 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.0813595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058648Jy sigma=0.493041 ! Fit after self-cal, rms=0.058560Jy sigma=0.492467 ! Inverting map ! Added new window around map position (-1.4, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334209 Jy ! Component: 100 - total flux cleaned = 0.00587795 Jy ! Total flux subtracted in 100 components = 0.00587795 Jy ! Clean residual min=-0.002279 max=0.002681 Jy/beam ! Clean residual mean=-0.000000 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0872375 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.0872375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058183Jy sigma=0.488758 ! Fit after self-cal, rms=0.058165Jy sigma=0.488671 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.095 mas, bmaj=1.157 mas, bpa=-18.48 degrees ! Estimated noise=0.259098 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.8, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628585 Jy ! Component: 100 - total flux cleaned = 0.0102518 Jy ! Component: 150 - total flux cleaned = 0.0133247 Jy ! Component: 200 - total flux cleaned = 0.0158848 Jy ! Total flux subtracted in 200 components = 0.0158848 Jy ! Clean residual min=-0.001993 max=0.003069 Jy/beam ! Clean residual mean=0.000001 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.103122 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 79 components and 0.103122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057357Jy sigma=0.480724 ! Fit after self-cal, rms=0.057260Jy sigma=0.480007 ! Inverting map ! Added new window around map position (-15.6, -24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036126 Jy ! Component: 100 - total flux cleaned = 0.00619574 Jy ! Component: 150 - total flux cleaned = 0.00837406 Jy ! Component: 200 - total flux cleaned = 0.0102827 Jy ! Total flux subtracted in 200 components = 0.0102827 Jy ! Clean residual min=-0.001848 max=0.002615 Jy/beam ! Clean residual mean=0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.113405 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 129 components and 0.113405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056933Jy sigma=0.476923 ! Fit after self-cal, rms=0.056898Jy sigma=0.476656 ! Inverting map ! Added new window around map position (-10.2, -20.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274387 Jy ! Component: 100 - total flux cleaned = 0.00470595 Jy ! Component: 150 - total flux cleaned = 0.00641546 Jy ! Component: 200 - total flux cleaned = 0.00793478 Jy ! Total flux subtracted in 200 components = 0.00793478 Jy ! Clean residual min=-0.001566 max=0.001902 Jy/beam ! Clean residual mean=0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.12134 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 164 components and 0.12134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056704Jy sigma=0.474790 ! Fit after self-cal, rms=0.056685Jy sigma=0.474643 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.095 x 1.157 at -18.48 degrees (North through East) ! Clean map min=-0.0014848 max=0.066916 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.99 HN 1.06 KP 1.07 ! LA 0.98 MK 1.03 NL 1.15 OV 1.05 ! PT 0.86 SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.97 KP 1.03 ! LA 0.98 MK 0.99 NL 1.15 OV 1.00 ! PT 0.91 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.99 KP 1.03 ! LA 0.97 MK 1.04 NL 1.10 OV 1.02 ! PT 0.91 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 1.05 KP 1.02 ! LA 1.00 MK 1.01 NL 1.12 OV 1.02 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.03 HN 1.01 KP 1.02 ! LA 0.95 MK 1.00 NL 1.11 OV 1.00 ! PT 0.86 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.97 KP 1.02 ! LA 0.92 MK 0.98 NL 1.14 OV 1.04 ! PT 0.88 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 HN 0.95 KP 1.02 ! LA 0.93 MK 1.12 NL 1.16 OV 0.99 ! PT 0.84 SC 1.06 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.98 HN 0.98 KP 1.05 ! LA 0.97 MK 0.99 NL 1.13 OV 1.02 ! PT 0.86 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.97 HN 1.00 KP 1.03 ! LA 0.97 MK 0.97 NL 1.12 OV 1.00 ! PT 0.86 SC 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 0.95 KP 1.04 ! LA 0.94 MK 1.01 NL 1.12 OV 1.03 ! PT 0.88 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.98 HN 0.96 KP 1.04 ! LA 0.99 MK 0.99 NL 1.10 OV 0.98 ! PT 0.89 SC 1.08 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.95 HN 0.99 KP 1.07 ! LA 0.96 MK 0.98 NL 1.14 OV 1.00 ! PT 0.86 SC 1.03 ! ! ! Fit before self-cal, rms=0.056685Jy sigma=0.474643 ! Fit after self-cal, rms=0.054557Jy sigma=0.470266 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.11 mas, bmaj=1.169 mas, bpa=-20.01 degrees ! Estimated noise=0.25507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157454 Jy ! Component: 100 - total flux cleaned = 0.0027271 Jy ! Component: 150 - total flux cleaned = 0.00367874 Jy ! Component: 200 - total flux cleaned = 0.00442115 Jy ! Total flux subtracted in 200 components = 0.00442115 Jy ! Clean residual min=-0.000741 max=0.000983 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.125761 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 212 components and 0.125761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054498Jy sigma=0.469590 ! Fit after self-cal, rms=0.054509Jy sigma=0.469377 ! Inverting map ! Added new window around map position (-18, -24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108636 Jy ! Component: 100 - total flux cleaned = 0.00173814 Jy ! Component: 150 - total flux cleaned = 0.00226681 Jy ! Component: 200 - total flux cleaned = 0.00273296 Jy ! Total flux subtracted in 200 components = 0.00273296 Jy ! Clean residual min=-0.000669 max=0.000867 Jy/beam ! Clean residual mean=0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.128494 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 246 components and 0.128494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054479Jy sigma=0.469038 ! Fit after self-cal, rms=0.054475Jy sigma=0.469012 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054475Jy sigma=0.469012 ! Fit after self-cal, rms=0.054787Jy sigma=0.468352 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.107 mas, bmaj=1.165 mas, bpa=-19.47 degrees ! Estimated noise=0.255327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000684874 Jy ! Component: 100 - total flux cleaned = 0.00125471 Jy ! Component: 150 - total flux cleaned = 0.00174598 Jy ! Component: 200 - total flux cleaned = 0.0021223 Jy ! Total flux subtracted in 200 components = 0.0021223 Jy ! Clean residual min=-0.000605 max=0.000759 Jy/beam ! Clean residual mean=0.000000 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.130616 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 261 components and 0.130616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054774Jy sigma=0.468203 ! Fit after self-cal, rms=0.054783Jy sigma=0.468168 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.2, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067104 Jy ! Component: 100 - total flux cleaned = 0.00103957 Jy ! Component: 150 - total flux cleaned = 0.00132916 Jy ! Component: 200 - total flux cleaned = 0.00158814 Jy ! Total flux subtracted in 200 components = 0.00158814 Jy ! Clean residual min=-0.000570 max=0.000617 Jy/beam ! Clean residual mean=0.000000 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.132204 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 276 components and 0.132204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054772Jy sigma=0.468057 ! Fit after self-cal, rms=0.054771Jy sigma=0.468048 ! Inverting map ! Added new window around map position (20.8, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565123 Jy ! Component: 100 - total flux cleaned = 0.000852989 Jy ! Component: 150 - total flux cleaned = 0.00108544 Jy ! Component: 200 - total flux cleaned = 0.00123585 Jy ! Total flux subtracted in 200 components = 0.00123585 Jy ! Clean residual min=-0.000585 max=0.000590 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.13344 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 295 components and 0.13344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054764Jy sigma=0.467981 ! Fit after self-cal, rms=0.054763Jy sigma=0.467977 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054763Jy sigma=0.467977 ! Fit after self-cal, rms=0.054748Jy sigma=0.467957 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.107 mas, bmaj=1.164 mas, bpa=-19.48 degrees ! Estimated noise=0.255254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338448 Jy ! Component: 100 - total flux cleaned = 0.000605261 Jy ! Component: 150 - total flux cleaned = 0.000775336 Jy ! Component: 200 - total flux cleaned = 0.00089525 Jy ! Total flux subtracted in 200 components = 0.00089525 Jy ! Clean residual min=-0.000546 max=0.000566 Jy/beam ! Clean residual mean=0.000000 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.134335 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 304 components and 0.134335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054744Jy sigma=0.467918 ! Fit after self-cal, rms=0.054744Jy sigma=0.467917 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153307 Jy ! Component: 100 - total flux cleaned = 0.000238549 Jy ! Component: 150 - total flux cleaned = 0.000328769 Jy ! Component: 200 - total flux cleaned = 0.000406688 Jy ! Total flux subtracted in 200 components = 0.000406688 Jy ! Clean residual min=-0.000541 max=0.000562 Jy/beam ! Clean residual mean=0.000000 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.134742 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 313 components and 0.134742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054741Jy sigma=0.467893 ! Fit after self-cal, rms=0.054741Jy sigma=0.467892 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054741Jy sigma=0.467892 ! Fit after self-cal, rms=0.054701Jy sigma=0.467888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=2.566 mas, bpa=73.14 degrees ! Estimated noise=0.321423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489955 Jy ! Component: 100 - total flux cleaned = 0.000818883 Jy ! Component: 150 - total flux cleaned = 0.000999396 Jy ! Component: 200 - total flux cleaned = 0.00116394 Jy ! Total flux subtracted in 200 components = 0.00116394 Jy ! Clean residual min=-0.000621 max=0.000746 Jy/beam ! Clean residual mean=0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.135906 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 322 components and 0.135906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054701Jy sigma=0.467874 ! Fit after self-cal, rms=0.054700Jy sigma=0.467868 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162554 Jy ! Component: 100 - total flux cleaned = 0.000268788 Jy ! Component: 150 - total flux cleaned = 0.000347159 Jy ! Component: 200 - total flux cleaned = 0.000403216 Jy ! Total flux subtracted in 200 components = 0.000403216 Jy ! Clean residual min=-0.000612 max=0.000734 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.136309 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 330 components and 0.136309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054700Jy sigma=0.467869 ! Fit after self-cal, rms=0.054700Jy sigma=0.467868 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.107 mas, bmaj=1.164 mas, bpa=-20.02 degrees ! Estimated noise=0.255176 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.107 x 1.164 at -20.02 degrees (North through East) ! Clean map min=-0.00048965 max=0.065854 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7781 mas, bmaj=0.8358 mas, bpa=-20.51 degrees ! Estimated noise=0.659399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0470493 Jy ! Component: 100 - total flux cleaned = 0.0611934 Jy ! Component: 150 - total flux cleaned = 0.0690368 Jy ! Component: 200 - total flux cleaned = 0.0747666 Jy ! Total flux subtracted in 200 components = 0.0747666 Jy ! Clean residual min=-0.002246 max=0.003338 Jy/beam ! Clean residual mean=-0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0747666 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0747666 Jy ! Inverting map and beam ! Estimated beam: bmin=1.107 mas, bmaj=1.164 mas, bpa=-20.02 degrees ! Estimated noise=0.255176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930756 Jy ! Component: 100 - total flux cleaned = 0.015619 Jy ! Component: 150 - total flux cleaned = 0.0207114 Jy ! Component: 200 - total flux cleaned = 0.0250125 Jy ! Total flux subtracted in 200 components = 0.0250125 Jy ! Clean residual min=-0.001584 max=0.002679 Jy/beam ! Clean residual mean=-0.000002 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0997792 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 106 components and 0.0997791 Jy ! Inverting map ! Added new window around map position (-13.6, -24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372092 Jy ! Component: 100 - total flux cleaned = 0.00695949 Jy ! Component: 150 - total flux cleaned = 0.00980202 Jy ! Component: 200 - total flux cleaned = 0.0123068 Jy ! Total flux subtracted in 200 components = 0.0123068 Jy ! Clean residual min=-0.001127 max=0.001592 Jy/beam ! Clean residual mean=-0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.112086 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 163 components and 0.112086 Jy ! Inverting map ! Added new window around map position (-13.6, -20.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221964 Jy ! Component: 100 - total flux cleaned = 0.00418925 Jy ! Component: 150 - total flux cleaned = 0.00594485 Jy ! Component: 200 - total flux cleaned = 0.00751864 Jy ! Total flux subtracted in 200 components = 0.00751864 Jy ! Clean residual min=-0.000906 max=0.001026 Jy/beam ! Clean residual mean=-0.000000 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.119605 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 223 components and 0.119605 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=2.566 mas, bpa=73.14 degrees ! Estimated noise=0.321423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272632 Jy ! Component: 100 - total flux cleaned = 0.00484328 Jy ! Component: 150 - total flux cleaned = 0.00657771 Jy ! Component: 200 - total flux cleaned = 0.00803132 Jy ! Total flux subtracted in 200 components = 0.00803132 Jy ! Clean residual min=-0.001004 max=0.001081 Jy/beam ! Clean residual mean=-0.000000 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.127636 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122903 Jy ! Component: 100 - total flux cleaned = 0.00227403 Jy ! Component: 150 - total flux cleaned = 0.00317021 Jy ! Component: 200 - total flux cleaned = 0.00394427 Jy ! Total flux subtracted in 200 components = 0.00394427 Jy ! Clean residual min=-0.000838 max=0.000865 Jy/beam ! Clean residual mean=-0.000000 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.13158 Jy ! Adding 166 model components to the UV plane model. ! The established model now contains 353 components and 0.13158 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.107 mas, bmaj=1.164 mas, bpa=-20.02 degrees ! Estimated noise=0.255176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702798 Jy ! Component: 100 - total flux cleaned = 0.00114511 Jy ! Component: 150 - total flux cleaned = 0.00148451 Jy ! Component: 200 - total flux cleaned = 0.00179478 Jy ! Total flux subtracted in 200 components = 0.00179478 Jy ! Clean residual min=-0.000560 max=0.000586 Jy/beam ! Clean residual mean=0.000000 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.133375 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 376 components and 0.133375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054712Jy sigma=0.467979 ! Fit after self-cal, rms=0.054706Jy sigma=0.467935 wmodel J1156+7306_X_a_map.mod ! Writing 376 model components to file: J1156+7306_X_a_map.mod wobs J1156+7306_X_a_uvs.fits ! Writing UV FITS file: J1156+7306_X_a_uvs.fits wwins J1156+7306_X_a_map.win ! wwins: Wrote 11 windows to J1156+7306_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118425 Jy ! Component: 100 - total flux cleaned = 0.000237941 Jy ! Component: 150 - total flux cleaned = 0.000381209 Jy ! Component: 200 - total flux cleaned = 0.000519797 Jy ! Component: 250 - total flux cleaned = 0.00064521 Jy ! Component: 300 - total flux cleaned = 0.00074985 Jy ! Component: 350 - total flux cleaned = 0.000801142 Jy ! Component: 400 - total flux cleaned = 0.00086829 Jy ! Component: 450 - total flux cleaned = 0.000975188 Jy ! Component: 500 - total flux cleaned = 0.00104793 Jy ! Component: 550 - total flux cleaned = 0.00111161 Jy ! Component: 600 - total flux cleaned = 0.00117445 Jy ! Component: 650 - total flux cleaned = 0.00122862 Jy ! Component: 700 - total flux cleaned = 0.00129727 Jy ! Component: 750 - total flux cleaned = 0.00132729 Jy ! Component: 800 - total flux cleaned = 0.00137205 Jy ! Component: 850 - total flux cleaned = 0.00140148 Jy ! Component: 900 - total flux cleaned = 0.00143075 Jy ! Component: 950 - total flux cleaned = 0.001474 Jy ! Component: 1000 - total flux cleaned = 0.00148102 Jy ! Component: 1050 - total flux cleaned = 0.00148819 Jy ! Component: 1100 - total flux cleaned = 0.00150931 Jy ! Component: 1150 - total flux cleaned = 0.00157194 Jy ! Component: 1200 - total flux cleaned = 0.00157874 Jy ! Component: 1250 - total flux cleaned = 0.00161971 Jy ! Component: 1300 - total flux cleaned = 0.00166032 Jy ! Component: 1350 - total flux cleaned = 0.0016738 Jy ! Component: 1400 - total flux cleaned = 0.0016939 Jy ! Component: 1450 - total flux cleaned = 0.00170059 Jy ! Component: 1500 - total flux cleaned = 0.00175298 Jy ! Component: 1550 - total flux cleaned = 0.001766 Jy ! Component: 1600 - total flux cleaned = 0.00179823 Jy ! Component: 1650 - total flux cleaned = 0.0017854 Jy ! Component: 1700 - total flux cleaned = 0.00181713 Jy ! Component: 1750 - total flux cleaned = 0.00183594 Jy ! Component: 1800 - total flux cleaned = 0.00184224 Jy ! Component: 1850 - total flux cleaned = 0.00182974 Jy ! Component: 1900 - total flux cleaned = 0.00185451 Jy ! Component: 1950 - total flux cleaned = 0.00185446 Jy ! Component: 2000 - total flux cleaned = 0.00184839 Jy ! Component: 2050 - total flux cleaned = 0.0018727 Jy ! Component: 2100 - total flux cleaned = 0.00187267 Jy ! Component: 2150 - total flux cleaned = 0.00186665 Jy ! Component: 2200 - total flux cleaned = 0.0018726 Jy ! Component: 2250 - total flux cleaned = 0.00189634 Jy ! Component: 2300 - total flux cleaned = 0.00190812 Jy ! Component: 2350 - total flux cleaned = 0.00188467 Jy ! Component: 2400 - total flux cleaned = 0.00190211 Jy ! Component: 2450 - total flux cleaned = 0.00192534 Jy ! Component: 2500 - total flux cleaned = 0.00190806 Jy ! Component: 2550 - total flux cleaned = 0.00189089 Jy ! Component: 2600 - total flux cleaned = 0.00190805 Jy ! Component: 2650 - total flux cleaned = 0.00192509 Jy ! Component: 2700 - total flux cleaned = 0.00191384 Jy ! Component: 2750 - total flux cleaned = 0.00194186 Jy ! Component: 2800 - total flux cleaned = 0.00195304 Jy ! Component: 2850 - total flux cleaned = 0.00194746 Jy ! Component: 2900 - total flux cleaned = 0.00193643 Jy ! Component: 2950 - total flux cleaned = 0.00197489 Jy ! Component: 3000 - total flux cleaned = 0.0020023 Jy ! Component: 3050 - total flux cleaned = 0.00200775 Jy ! Component: 3100 - total flux cleaned = 0.00198062 Jy ! Component: 3150 - total flux cleaned = 0.0019914 Jy ! Component: 3200 - total flux cleaned = 0.00201827 Jy ! Component: 3250 - total flux cleaned = 0.00202362 Jy ! Component: 3300 - total flux cleaned = 0.00199703 Jy ! Component: 3350 - total flux cleaned = 0.00201287 Jy ! Component: 3400 - total flux cleaned = 0.00198656 Jy ! Component: 3450 - total flux cleaned = 0.00198656 Jy ! Component: 3500 - total flux cleaned = 0.00196565 Jy ! Component: 3550 - total flux cleaned = 0.00201248 Jy ! Component: 3600 - total flux cleaned = 0.00199178 Jy ! Component: 3650 - total flux cleaned = 0.00199699 Jy ! Component: 3700 - total flux cleaned = 0.00200213 Jy ! Component: 3750 - total flux cleaned = 0.00197657 Jy ! Component: 3800 - total flux cleaned = 0.0019766 Jy ! Component: 3850 - total flux cleaned = 0.00196142 Jy ! Component: 3900 - total flux cleaned = 0.00196646 Jy ! Component: 3950 - total flux cleaned = 0.00195143 Jy ! Component: 4000 - total flux cleaned = 0.00196643 Jy ! Component: 4050 - total flux cleaned = 0.00197144 Jy ! Total flux subtracted in 4096 components = 0.00196152 Jy ! Clean residual min=-0.000305 max=0.000308 Jy/beam ! Clean residual mean=-0.000000 rms=0.000086 Jy/beam ! Combined flux in latest and established models = 0.135337 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 719 components and 0.135337 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1156+7306_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.107 x 1.164 at -20.02 degrees (North through East) ! Clean map min=-0.00040516 max=0.065792 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1156+7306_X_a_map.fits wmodel /image_prod/ug002_uva//J1156+7306_X_a_map.mod ! Writing 719 model components to file: /image_prod/ug002_uva//J1156+7306_X_a_map.mod wobs /image_prod/ug002_uva//J1156+7306_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1156+7306_X_a_uvs.fits wwins /image_prod/ug002_uva//J1156+7306_X_a_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J1156+7306_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0657919 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.53994e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.389407 0.389407 0.778814 1.55763 3.11526 6.23051 12.461 24.9221 49.8441 99.6882 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.065 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 770.402 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1156+7306_X_a_dfm.log closed on Thu Mar 5 00:19:18 2020