! Started logfile: /image_prod/ug002_uva//J1155-3107_S_dfm.log on Thu Mar 5 00:18:46 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1155-3107_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1155-3107_S_uva.fits ! AN table 1: 50 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.846667 visibilities/baseline/integration-bin. ! Found source: J1155-3107 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 2667 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1155-3107_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.019485Jy sigma=5.371955 ! Fit after self-cal, rms=0.875751Jy sigma=4.617663 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.141 mas, bmaj=5.81 mas, bpa=-1.592 degrees ! Estimated noise=3.8304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101827 Jy ! Component: 100 - total flux cleaned = 0.124036 Jy ! Total flux subtracted in 100 components = 0.124036 Jy ! Clean residual min=-0.007077 max=0.008028 Jy/beam ! Clean residual mean=0.000005 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.124036 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.124036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095693Jy sigma=0.450684 ! Fit after self-cal, rms=0.095699Jy sigma=0.450333 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=6.44 mas, bpa=-2.01 degrees ! Estimated noise=2.6893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436294 Jy ! Component: 100 - total flux cleaned = 0.00459938 Jy ! Component: 150 - total flux cleaned = 0.00467172 Jy ! Component: 200 - total flux cleaned = 0.00458297 Jy ! Total flux subtracted in 200 components = 0.00458297 Jy ! Clean residual min=-0.005061 max=0.006724 Jy/beam ! Clean residual mean=0.000015 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.128619 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.128619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095534Jy sigma=0.449132 ! Fit after self-cal, rms=0.095529Jy sigma=0.449118 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.567 x 6.44 at -2.01 degrees (North through East) ! Clean map min=-0.0048496 max=0.12973 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 KP 1.03 LA 0.98 MK 1.00 ! NL 1.07 OV 0.91 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 KP 0.97 LA 0.96 MK 1.01 ! NL 1.20 OV 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 KP 0.96 LA 0.98 MK 0.97 ! NL 1.05 OV 0.99 SC 0.95 ! ! ! Fit before self-cal, rms=0.095529Jy sigma=0.449118 ! Fit after self-cal, rms=0.097867Jy sigma=0.445914 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.43 mas, bpa=-1.83 degrees ! Estimated noise=2.68494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298655 Jy ! Component: 100 - total flux cleaned = 0.000385696 Jy ! Component: 150 - total flux cleaned = 0.000403191 Jy ! Component: 200 - total flux cleaned = 0.000372553 Jy ! Total flux subtracted in 200 components = 0.000372553 Jy ! Clean residual min=-0.005030 max=0.004732 Jy/beam ! Clean residual mean=0.000010 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.128992 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 20 components and 0.128992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097857Jy sigma=0.445863 ! Fit after self-cal, rms=0.098018Jy sigma=0.445755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098018Jy sigma=0.445755 ! Fit after self-cal, rms=0.099972Jy sigma=0.443263 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.457 mas, bpa=-1.921 degrees ! Estimated noise=2.69687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.8471e-05 Jy ! Component: 100 - total flux cleaned = 0.000129926 Jy ! Component: 150 - total flux cleaned = 0.000129272 Jy ! Component: 200 - total flux cleaned = 0.000130373 Jy ! Total flux subtracted in 200 components = 0.000130373 Jy ! Clean residual min=-0.004221 max=0.003638 Jy/beam ! Clean residual mean=0.000009 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.129122 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.129122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099956Jy sigma=0.443166 ! Fit after self-cal, rms=0.100024Jy sigma=0.443094 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.75194e-05 Jy ! Component: 100 - total flux cleaned = 5.27422e-05 Jy ! Component: 150 - total flux cleaned = 9.65724e-05 Jy ! Component: 200 - total flux cleaned = 0.000122517 Jy ! Total flux subtracted in 200 components = 0.000122517 Jy ! Clean residual min=-0.004201 max=0.003643 Jy/beam ! Clean residual mean=0.000009 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.129245 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.129245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100019Jy sigma=0.443051 ! Fit after self-cal, rms=0.100016Jy sigma=0.443043 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100016Jy sigma=0.443043 ! Fit after self-cal, rms=0.100810Jy sigma=0.442867 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.475 mas, bpa=-1.997 degrees ! Estimated noise=2.70013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.86843e-05 Jy ! Component: 100 - total flux cleaned = -0.000142373 Jy ! Component: 150 - total flux cleaned = -0.000192793 Jy ! Component: 200 - total flux cleaned = -0.000192508 Jy ! Total flux subtracted in 200 components = -0.000192508 Jy ! Clean residual min=-0.004015 max=0.003704 Jy/beam ! Clean residual mean=0.000009 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.129052 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.129052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100803Jy sigma=0.442817 ! Fit after self-cal, rms=0.100813Jy sigma=0.442805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.54685e-06 Jy ! Component: 100 - total flux cleaned = 3.20434e-05 Jy ! Component: 150 - total flux cleaned = 3.21895e-05 Jy ! Component: 200 - total flux cleaned = 3.21022e-05 Jy ! Total flux subtracted in 200 components = 3.21022e-05 Jy ! Clean residual min=-0.004005 max=0.003709 Jy/beam ! Clean residual mean=0.000009 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.129084 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.129084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100811Jy sigma=0.442782 ! Fit after self-cal, rms=0.100808Jy sigma=0.442779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100808Jy sigma=0.442779 ! Fit after self-cal, rms=0.101045Jy sigma=0.442769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.976 mas, bmaj=17.52 mas, bpa=0.512 degrees ! Estimated noise=3.98901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503339 Jy ! Component: 100 - total flux cleaned = 0.000514186 Jy ! Component: 150 - total flux cleaned = 0.000513502 Jy ! Component: 200 - total flux cleaned = 0.000514407 Jy ! Total flux subtracted in 200 components = 0.000514407 Jy ! Clean residual min=-0.005850 max=0.004080 Jy/beam ! Clean residual mean=0.000024 rms=0.001577 Jy/beam ! Combined flux in latest and established models = 0.129599 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 38 components and 0.129599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101042Jy sigma=0.442782 ! Fit after self-cal, rms=0.101043Jy sigma=0.442781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11155e-05 Jy ! Component: 100 - total flux cleaned = 2.092e-05 Jy ! Component: 150 - total flux cleaned = 2.24037e-05 Jy ! Component: 200 - total flux cleaned = 2.43726e-05 Jy ! Total flux subtracted in 200 components = 2.43726e-05 Jy ! Clean residual min=-0.005853 max=0.004076 Jy/beam ! Clean residual mean=0.000024 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.129623 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 39 components and 0.129623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101043Jy sigma=0.442794 ! Fit after self-cal, rms=0.101038Jy sigma=0.442793 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.485 mas, bpa=-2.064 degrees ! Estimated noise=2.70254 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.561 x 6.485 at -2.064 degrees (North through East) ! Clean map min=-0.0037657 max=0.12982 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.133 mas, bmaj=5.86 mas, bpa=-1.519 degrees ! Estimated noise=3.80872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101174 Jy ! Component: 100 - total flux cleaned = 0.123262 Jy ! Component: 150 - total flux cleaned = 0.12661 Jy ! Component: 200 - total flux cleaned = 0.127544 Jy ! Total flux subtracted in 200 components = 0.127544 Jy ! Clean residual min=-0.005598 max=0.005662 Jy/beam ! Clean residual mean=0.000003 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.127544 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.127544 Jy ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.485 mas, bpa=-2.064 degrees ! Estimated noise=2.70254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190787 Jy ! Component: 100 - total flux cleaned = 0.00186436 Jy ! Component: 150 - total flux cleaned = 0.00186366 Jy ! Component: 200 - total flux cleaned = 0.00183172 Jy ! Total flux subtracted in 200 components = 0.00183172 Jy ! Clean residual min=-0.003950 max=0.003655 Jy/beam ! Clean residual mean=0.000009 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.129376 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.129376 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.976 mas, bmaj=17.52 mas, bpa=0.512 degrees ! Estimated noise=3.98901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327083 Jy ! Component: 100 - total flux cleaned = 0.000313917 Jy ! Component: 150 - total flux cleaned = 0.000301937 Jy ! Component: 200 - total flux cleaned = 0.00029109 Jy ! Total flux subtracted in 200 components = 0.00029109 Jy ! Clean residual min=-0.005846 max=0.004094 Jy/beam ! Clean residual mean=0.000024 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.129667 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.68554e-07 Jy ! Component: 100 - total flux cleaned = 2.39987e-06 Jy ! Component: 150 - total flux cleaned = 3.70218e-06 Jy ! Component: 200 - total flux cleaned = 4.91558e-06 Jy ! Total flux subtracted in 200 components = 4.91558e-06 Jy ! Clean residual min=-0.005849 max=0.004095 Jy/beam ! Clean residual mean=0.000024 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.129672 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 17 components and 0.129672 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.485 mas, bpa=-2.064 degrees ! Estimated noise=2.70254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000329435 Jy ! Component: 100 - total flux cleaned = -0.000418092 Jy ! Component: 150 - total flux cleaned = -0.000476392 Jy ! Component: 200 - total flux cleaned = -0.000502377 Jy ! Total flux subtracted in 200 components = -0.000502377 Jy ! Clean residual min=-0.004008 max=0.003704 Jy/beam ! Clean residual mean=0.000009 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.12917 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.12917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.101039Jy sigma=0.442783 ! Fit after self-cal, rms=0.101041Jy sigma=0.442781 wmodel J1155-3107_S_map.mod ! Writing 31 model components to file: J1155-3107_S_map.mod wobs J1155-3107_S_uvs.fits ! Writing UV FITS file: J1155-3107_S_uvs.fits wwins J1155-3107_S_map.win ! wwins: Wrote 1 windows to J1155-3107_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00071521 Jy ! Component: 100 - total flux cleaned = -0.00116032 Jy ! Component: 150 - total flux cleaned = -0.00157229 Jy ! Component: 200 - total flux cleaned = -0.00218758 Jy ! Component: 250 - total flux cleaned = -0.0027224 Jy ! Component: 300 - total flux cleaned = -0.00313481 Jy ! Component: 350 - total flux cleaned = -0.00353137 Jy ! Component: 400 - total flux cleaned = -0.00386471 Jy ! Component: 450 - total flux cleaned = -0.00404786 Jy ! Component: 500 - total flux cleaned = -0.00404735 Jy ! Component: 550 - total flux cleaned = -0.00413195 Jy ! Component: 600 - total flux cleaned = -0.00425555 Jy ! Component: 650 - total flux cleaned = -0.0042958 Jy ! Component: 700 - total flux cleaned = -0.0044123 Jy ! Component: 750 - total flux cleaned = -0.00433488 Jy ! Component: 800 - total flux cleaned = -0.00437139 Jy ! Component: 850 - total flux cleaned = -0.00447868 Jy ! Component: 900 - total flux cleaned = -0.00444362 Jy ! Component: 950 - total flux cleaned = -0.00458128 Jy ! Component: 1000 - total flux cleaned = -0.00468179 Jy ! Component: 1050 - total flux cleaned = -0.00478021 Jy ! Component: 1100 - total flux cleaned = -0.00477968 Jy ! Component: 1150 - total flux cleaned = -0.00477951 Jy ! Component: 1200 - total flux cleaned = -0.00477938 Jy ! Component: 1250 - total flux cleaned = -0.00477933 Jy ! Component: 1300 - total flux cleaned = -0.00477978 Jy ! Component: 1350 - total flux cleaned = -0.004721 Jy ! Component: 1400 - total flux cleaned = -0.00469252 Jy ! Component: 1450 - total flux cleaned = -0.00474954 Jy ! Component: 1500 - total flux cleaned = -0.00480544 Jy ! Component: 1550 - total flux cleaned = -0.00488798 Jy ! Component: 1600 - total flux cleaned = -0.00486083 Jy ! Component: 1650 - total flux cleaned = -0.00488797 Jy ! Component: 1700 - total flux cleaned = -0.00491457 Jy ! Component: 1750 - total flux cleaned = -0.00491436 Jy ! Component: 1800 - total flux cleaned = -0.0049664 Jy ! Component: 1850 - total flux cleaned = -0.00496608 Jy ! Component: 1900 - total flux cleaned = -0.00496583 Jy ! Component: 1950 - total flux cleaned = -0.00501645 Jy ! Component: 2000 - total flux cleaned = -0.00506644 Jy ! Component: 2050 - total flux cleaned = -0.0051162 Jy ! Component: 2100 - total flux cleaned = -0.00519031 Jy ! Component: 2150 - total flux cleaned = -0.0052394 Jy ! Component: 2200 - total flux cleaned = -0.00531288 Jy ! Component: 2250 - total flux cleaned = -0.00536159 Jy ! Component: 2300 - total flux cleaned = -0.00543445 Jy ! Component: 2350 - total flux cleaned = -0.00545859 Jy ! Component: 2400 - total flux cleaned = -0.0055548 Jy ! Component: 2450 - total flux cleaned = -0.00560269 Jy ! Component: 2500 - total flux cleaned = -0.00565041 Jy ! Component: 2550 - total flux cleaned = -0.00565036 Jy ! Component: 2600 - total flux cleaned = -0.00569796 Jy ! Component: 2650 - total flux cleaned = -0.00572178 Jy ! Component: 2700 - total flux cleaned = -0.00574561 Jy ! Component: 2750 - total flux cleaned = -0.00579311 Jy ! Component: 2800 - total flux cleaned = -0.00579296 Jy ! Component: 2850 - total flux cleaned = -0.00581668 Jy ! Component: 2900 - total flux cleaned = -0.00584044 Jy ! Component: 2950 - total flux cleaned = -0.00584043 Jy ! Component: 3000 - total flux cleaned = -0.00584035 Jy ! Component: 3050 - total flux cleaned = -0.00586438 Jy ! Component: 3100 - total flux cleaned = -0.00584016 Jy ! Component: 3150 - total flux cleaned = -0.00588867 Jy ! Component: 3200 - total flux cleaned = -0.00586409 Jy ! Component: 3250 - total flux cleaned = -0.00588853 Jy ! Component: 3300 - total flux cleaned = -0.00588847 Jy ! Component: 3350 - total flux cleaned = -0.00586326 Jy ! Component: 3400 - total flux cleaned = -0.00583808 Jy ! Component: 3450 - total flux cleaned = -0.00581257 Jy ! Component: 3500 - total flux cleaned = -0.00581246 Jy ! Component: 3550 - total flux cleaned = -0.00578663 Jy ! Component: 3600 - total flux cleaned = -0.0057606 Jy ! Component: 3650 - total flux cleaned = -0.00573409 Jy ! Component: 3700 - total flux cleaned = -0.00573406 Jy ! Component: 3750 - total flux cleaned = -0.00565336 Jy ! Component: 3800 - total flux cleaned = -0.00568038 Jy ! Component: 3850 - total flux cleaned = -0.00568062 Jy ! Component: 3900 - total flux cleaned = -0.00565283 Jy ! Component: 3950 - total flux cleaned = -0.00562462 Jy ! Component: 4000 - total flux cleaned = -0.00559638 Jy ! Component: 4050 - total flux cleaned = -0.00556778 Jy ! Total flux subtracted in 4096 components = -0.00553897 Jy ! Clean residual min=-0.002102 max=0.001878 Jy/beam ! Clean residual mean=0.000004 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.123631 Jy keep ! Adding 212 model components to the UV plane model. ! The established model now contains 243 components and 0.123631 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1155-3107_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.561 x 6.485 at -2.064 degrees (North through East) ! Clean map min=-0.0024808 max=0.12952 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1155-3107_S_map.fits wmodel /image_prod/ug002_uva//J1155-3107_S_map.mod ! Writing 243 model components to file: /image_prod/ug002_uva//J1155-3107_S_map.mod wobs /image_prod/ug002_uva//J1155-3107_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1155-3107_S_uvs.fits wwins /image_prod/ug002_uva//J1155-3107_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1155-3107_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.129522 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000451483 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04573 1.04573 2.09145 4.1829 8.36581 16.7316 33.4632 66.9264 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.129 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 286.882 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1155-3107_S_dfm.log closed on Thu Mar 5 00:18:50 2020