! Started logfile: /image_prod/ug002_uva//J1154-3242_S_dfm.log on Thu Mar 5 00:17:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1154-3242_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1154-3242_S_uva.fits ! AN table 1: 50 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.850476 visibilities/baseline/integration-bin. ! Found source: J1154-3242 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 2679 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1154-3242_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.027536Jy sigma=5.078039 ! Fit after self-cal, rms=0.853171Jy sigma=4.213289 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.271 mas, bmaj=5.999 mas, bpa=-4.844 degrees ! Estimated noise=4.29644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116139 Jy ! Component: 100 - total flux cleaned = 0.148408 Jy ! Total flux subtracted in 100 components = 0.148408 Jy ! Clean residual min=-0.013788 max=0.016113 Jy/beam ! Clean residual mean=-0.000011 rms=0.003436 Jy/beam ! Combined flux in latest and established models = 0.148408 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.148408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.127148Jy sigma=0.460720 ! Fit after self-cal, rms=0.127014Jy sigma=0.460410 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=6.711 mas, bpa=-4.545 degrees ! Estimated noise=2.89939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163695 Jy ! Component: 100 - total flux cleaned = 0.0246804 Jy ! Component: 150 - total flux cleaned = 0.0275897 Jy ! Component: 200 - total flux cleaned = 0.0280861 Jy ! Total flux subtracted in 200 components = 0.0280861 Jy ! Clean residual min=-0.007875 max=0.010200 Jy/beam ! Clean residual mean=0.000018 rms=0.002275 Jy/beam ! Combined flux in latest and established models = 0.176494 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.176494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.124674Jy sigma=0.446505 ! Fit after self-cal, rms=0.124598Jy sigma=0.446312 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.604 x 6.711 at -4.545 degrees (North through East) ! Clean map min=-0.0075321 max=0.14916 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 KP 0.93 LA 0.98 MK 1.06 ! NL 1.07 OV 0.91 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 KP 0.88 LA 1.00 MK 0.97 ! NL 1.15 OV 0.96 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 KP 0.89 LA 0.93 MK 1.00 ! NL 1.02 OV 0.95 SC 1.03 ! ! ! Fit before self-cal, rms=0.124598Jy sigma=0.446312 ! Fit after self-cal, rms=0.132773Jy sigma=0.437771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=6.746 mas, bpa=-4.279 degrees ! Estimated noise=2.90019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061347 Jy ! Component: 100 - total flux cleaned = -0.000325054 Jy ! Component: 150 - total flux cleaned = 5.54905e-05 Jy ! Component: 200 - total flux cleaned = 0.000387368 Jy ! Total flux subtracted in 200 components = 0.000387368 Jy ! Clean residual min=-0.007006 max=0.005567 Jy/beam ! Clean residual mean=0.000006 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.176882 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.176882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.132446Jy sigma=0.436397 ! Fit after self-cal, rms=0.132734Jy sigma=0.436177 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.132734Jy sigma=0.436177 ! Fit after self-cal, rms=0.121474Jy sigma=0.431274 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=6.676 mas, bpa=-4.133 degrees ! Estimated noise=2.90465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127252 Jy ! Component: 100 - total flux cleaned = 0.00161907 Jy ! Component: 150 - total flux cleaned = 0.00176803 Jy ! Component: 200 - total flux cleaned = 0.00185818 Jy ! Total flux subtracted in 200 components = 0.00185818 Jy ! Clean residual min=-0.004822 max=0.005176 Jy/beam ! Clean residual mean=0.000002 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.17874 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.17874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.121404Jy sigma=0.431049 ! Fit after self-cal, rms=0.121332Jy sigma=0.430956 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (86.5, 30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003835 Jy ! Component: 100 - total flux cleaned = 0.0041667 Jy ! Component: 150 - total flux cleaned = 0.00416674 Jy ! Component: 200 - total flux cleaned = 0.00434697 Jy ! Total flux subtracted in 200 components = 0.00434697 Jy ! Clean residual min=-0.004433 max=0.004142 Jy/beam ! Clean residual mean=0.000004 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.183087 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.183087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.121124Jy sigma=0.430077 ! Fit after self-cal, rms=0.121147Jy sigma=0.429976 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.121147Jy sigma=0.429976 ! Fit after self-cal, rms=0.115907Jy sigma=0.429486 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=6.651 mas, bpa=-4.114 degrees ! Estimated noise=2.88727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063912 Jy ! Component: 100 - total flux cleaned = 0.000588316 Jy ! Component: 150 - total flux cleaned = 0.000541848 Jy ! Component: 200 - total flux cleaned = 0.000499892 Jy ! Total flux subtracted in 200 components = 0.000499892 Jy ! Clean residual min=-0.003966 max=0.003727 Jy/beam ! Clean residual mean=0.000005 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.183587 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 76 components and 0.183587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.115842Jy sigma=0.429281 ! Fit after self-cal, rms=0.115795Jy sigma=0.429258 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104951 Jy ! Component: 100 - total flux cleaned = 2.13762e-05 Jy ! Component: 150 - total flux cleaned = -5.90813e-05 Jy ! Component: 200 - total flux cleaned = -0.000171997 Jy ! Total flux subtracted in 200 components = -0.000171997 Jy ! Clean residual min=-0.003968 max=0.003690 Jy/beam ! Clean residual mean=0.000005 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.183415 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.183415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.115759Jy sigma=0.429154 ! Fit after self-cal, rms=0.115761Jy sigma=0.429150 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.115761Jy sigma=0.429150 ! Fit after self-cal, rms=0.115666Jy sigma=0.429121 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.012 mas, bmaj=18.43 mas, bpa=-0.8102 degrees ! Estimated noise=4.12142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000877603 Jy ! Component: 100 - total flux cleaned = -0.000964353 Jy ! Component: 150 - total flux cleaned = -0.00112803 Jy ! Component: 200 - total flux cleaned = -0.00131874 Jy ! Total flux subtracted in 200 components = -0.00131874 Jy ! Clean residual min=-0.004404 max=0.003471 Jy/beam ! Clean residual mean=0.000011 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.182096 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 87 components and 0.182096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.115645Jy sigma=0.429119 ! Fit after self-cal, rms=0.115661Jy sigma=0.429105 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234262 Jy ! Component: 100 - total flux cleaned = -0.000410061 Jy ! Component: 150 - total flux cleaned = -0.000541053 Jy ! Component: 200 - total flux cleaned = -0.000634089 Jy ! Total flux subtracted in 200 components = -0.000634089 Jy ! Clean residual min=-0.004222 max=0.003436 Jy/beam ! Clean residual mean=0.000011 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.181462 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 88 components and 0.181462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.115660Jy sigma=0.429185 ! Fit after self-cal, rms=0.115673Jy sigma=0.429178 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=6.646 mas, bpa=-4.135 degrees ! Estimated noise=2.88535 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.609 x 6.646 at -4.135 degrees (North through East) ! Clean map min=-0.0038938 max=0.14861 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=5.921 mas, bpa=-4.344 degrees ! Estimated noise=4.26095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115191 Jy ! Component: 100 - total flux cleaned = 0.147573 Jy ! Component: 150 - total flux cleaned = 0.162677 Jy ! Component: 200 - total flux cleaned = 0.170862 Jy ! Total flux subtracted in 200 components = 0.170862 Jy ! Clean residual min=-0.009112 max=0.007542 Jy/beam ! Clean residual mean=-0.000003 rms=0.002035 Jy/beam ! Combined flux in latest and established models = 0.170862 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.170862 Jy ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=6.646 mas, bpa=-4.135 degrees ! Estimated noise=2.88535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615838 Jy ! Component: 100 - total flux cleaned = 0.00818844 Jy ! Component: 150 - total flux cleaned = 0.00867813 Jy ! Component: 200 - total flux cleaned = 0.00899982 Jy ! Total flux subtracted in 200 components = 0.00899982 Jy ! Clean residual min=-0.005313 max=0.004387 Jy/beam ! Clean residual mean=0.000002 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.179862 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.179862 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.012 mas, bmaj=18.43 mas, bpa=-0.8102 degrees ! Estimated noise=4.12142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465346 Jy ! Component: 100 - total flux cleaned = 0.000845442 Jy ! Component: 150 - total flux cleaned = 0.000984436 Jy ! Component: 200 - total flux cleaned = 0.000860702 Jy ! Total flux subtracted in 200 components = 0.000860702 Jy ! Clean residual min=-0.005080 max=0.003827 Jy/beam ! Clean residual mean=0.000009 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.180723 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115089 Jy ! Component: 100 - total flux cleaned = -0.000274805 Jy ! Component: 150 - total flux cleaned = -0.000371662 Jy ! Component: 200 - total flux cleaned = -0.000463452 Jy ! Total flux subtracted in 200 components = -0.000463452 Jy ! Clean residual min=-0.004790 max=0.003755 Jy/beam ! Clean residual mean=0.000010 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.18026 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.18026 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=6.646 mas, bpa=-4.135 degrees ! Estimated noise=2.88535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000890258 Jy ! Component: 100 - total flux cleaned = -0.000807667 Jy ! Component: 150 - total flux cleaned = -0.000663784 Jy ! Component: 200 - total flux cleaned = -0.000394759 Jy ! Total flux subtracted in 200 components = -0.000394759 Jy ! Clean residual min=-0.004359 max=0.003813 Jy/beam ! Clean residual mean=0.000003 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.179865 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.179865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.115790Jy sigma=0.429654 ! Fit after self-cal, rms=0.115791Jy sigma=0.429614 wmodel J1154-3242_S_map.mod ! Writing 65 model components to file: J1154-3242_S_map.mod wobs J1154-3242_S_uvs.fits ! Writing UV FITS file: J1154-3242_S_uvs.fits wwins J1154-3242_S_map.win ! wwins: Wrote 2 windows to J1154-3242_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000864463 Jy ! Component: 100 - total flux cleaned = -0.00126537 Jy ! Component: 150 - total flux cleaned = -0.0013313 Jy ! Component: 200 - total flux cleaned = -0.00133252 Jy ! Component: 250 - total flux cleaned = -0.0012226 Jy ! Component: 300 - total flux cleaned = -0.00117023 Jy ! Component: 350 - total flux cleaned = -0.00106818 Jy ! Component: 400 - total flux cleaned = -0.00097093 Jy ! Component: 450 - total flux cleaned = -0.000924678 Jy ! Component: 500 - total flux cleaned = -0.000923251 Jy ! Component: 550 - total flux cleaned = -0.00101146 Jy ! Component: 600 - total flux cleaned = -0.00105563 Jy ! Component: 650 - total flux cleaned = -0.00109854 Jy ! Component: 700 - total flux cleaned = -0.00118165 Jy ! Component: 750 - total flux cleaned = -0.00118109 Jy ! Component: 800 - total flux cleaned = -0.00118054 Jy ! Component: 850 - total flux cleaned = -0.00106508 Jy ! Component: 900 - total flux cleaned = -0.00110282 Jy ! Component: 950 - total flux cleaned = -0.00102938 Jy ! Component: 1000 - total flux cleaned = -0.00102917 Jy ! Component: 1050 - total flux cleaned = -0.000959294 Jy ! Component: 1100 - total flux cleaned = -0.000958648 Jy ! Component: 1150 - total flux cleaned = -0.000957973 Jy ! Component: 1200 - total flux cleaned = -0.000925402 Jy ! Component: 1250 - total flux cleaned = -0.000926414 Jy ! Component: 1300 - total flux cleaned = -0.00102204 Jy ! Component: 1350 - total flux cleaned = -0.00105313 Jy ! Component: 1400 - total flux cleaned = -0.00108389 Jy ! Component: 1450 - total flux cleaned = -0.00105306 Jy ! Component: 1500 - total flux cleaned = -0.00102377 Jy ! Component: 1550 - total flux cleaned = -0.000965377 Jy ! Component: 1600 - total flux cleaned = -0.000994396 Jy ! Component: 1650 - total flux cleaned = -0.000937444 Jy ! Component: 1700 - total flux cleaned = -0.000937877 Jy ! Component: 1750 - total flux cleaned = -0.000937734 Jy ! Component: 1800 - total flux cleaned = -0.000801694 Jy ! Component: 1850 - total flux cleaned = -0.000801949 Jy ! Component: 1900 - total flux cleaned = -0.000669081 Jy ! Component: 1950 - total flux cleaned = -0.000616621 Jy ! Component: 2000 - total flux cleaned = -0.000538713 Jy ! Component: 2050 - total flux cleaned = -0.000538675 Jy ! Component: 2100 - total flux cleaned = -0.000512983 Jy ! Component: 2150 - total flux cleaned = -0.00043716 Jy ! Component: 2200 - total flux cleaned = -0.000412034 Jy ! Component: 2250 - total flux cleaned = -0.000312568 Jy ! Component: 2300 - total flux cleaned = -0.000214266 Jy ! Component: 2350 - total flux cleaned = -0.00011677 Jy ! Component: 2400 - total flux cleaned = -9.26612e-05 Jy ! Component: 2450 - total flux cleaned = -2.0458e-05 Jy ! Component: 2500 - total flux cleaned = 5.13661e-05 Jy ! Component: 2550 - total flux cleaned = 0.000122819 Jy ! Component: 2600 - total flux cleaned = 0.000193817 Jy ! Component: 2650 - total flux cleaned = 0.000264515 Jy ! Component: 2700 - total flux cleaned = 0.000334731 Jy ! Component: 2750 - total flux cleaned = 0.000404586 Jy ! Component: 2800 - total flux cleaned = 0.000497559 Jy ! Component: 2850 - total flux cleaned = 0.00056696 Jy ! Component: 2900 - total flux cleaned = 0.000520979 Jy ! Component: 2950 - total flux cleaned = 0.000521057 Jy ! Component: 3000 - total flux cleaned = 0.000452221 Jy ! Component: 3050 - total flux cleaned = 0.000406385 Jy ! Component: 3100 - total flux cleaned = 0.000337629 Jy ! Component: 3150 - total flux cleaned = 0.000268956 Jy ! Component: 3200 - total flux cleaned = 0.000200395 Jy ! Component: 3250 - total flux cleaned = 8.62101e-05 Jy ! Component: 3300 - total flux cleaned = 4.05596e-05 Jy ! Component: 3350 - total flux cleaned = -2.79705e-05 Jy ! Component: 3400 - total flux cleaned = -0.000119306 Jy ! Component: 3450 - total flux cleaned = -0.000210611 Jy ! Component: 3500 - total flux cleaned = -0.000302027 Jy ! Component: 3550 - total flux cleaned = -0.000439226 Jy ! Component: 3600 - total flux cleaned = -0.000553787 Jy ! Component: 3650 - total flux cleaned = -0.000668489 Jy ! Component: 3700 - total flux cleaned = -0.000852394 Jy ! Component: 3750 - total flux cleaned = -0.00094464 Jy ! Component: 3800 - total flux cleaned = -0.00110651 Jy ! Component: 3850 - total flux cleaned = -0.00122245 Jy ! Component: 3900 - total flux cleaned = -0.00126906 Jy ! Component: 3950 - total flux cleaned = -0.00140915 Jy ! Component: 4000 - total flux cleaned = -0.00152645 Jy ! Component: 4050 - total flux cleaned = -0.00164448 Jy ! Total flux subtracted in 4096 components = -0.00176275 Jy ! Clean residual min=-0.001390 max=0.001482 Jy/beam ! Clean residual mean=-0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.178102 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 300 components and 0.178102 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1154-3242_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.609 x 6.646 at -4.135 degrees (North through East) ! Clean map min=-0.0032485 max=0.14967 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1154-3242_S_map.fits wmodel /image_prod/ug002_uva//J1154-3242_S_map.mod ! Writing 300 model components to file: /image_prod/ug002_uva//J1154-3242_S_map.mod wobs /image_prod/ug002_uva//J1154-3242_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1154-3242_S_uvs.fits wwins /image_prod/ug002_uva//J1154-3242_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1154-3242_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.14967 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000354537 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.710635 0.710635 1.42127 2.84254 5.68508 11.3702 22.7403 45.4807 90.9613 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.149 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 422.157 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1154-3242_S_dfm.log closed on Thu Mar 5 00:17:49 2020