! Started logfile: /image_prod/ug002_uva//J1153+4036_X_dfm.log on Thu Mar 5 00:17:18 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1153+4036_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1153+4036_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96963 visibilities/baseline/integration-bin. ! Found source: J1153+4036 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31416 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1153+4036_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.065699Jy sigma=8.369366 ! Fit after self-cal, rms=0.730544Jy sigma=5.918491 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7582 mas, bmaj=1.191 mas, bpa=-25.09 degrees ! Estimated noise=0.986477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189163 Jy ! Component: 100 - total flux cleaned = 0.266943 Jy ! Total flux subtracted in 100 components = 0.266943 Jy ! Clean residual min=-0.027109 max=0.105876 Jy/beam ! Clean residual mean=-0.000008 rms=0.006959 Jy/beam ! Combined flux in latest and established models = 0.266943 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.266943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.228727Jy sigma=1.673415 ! Fit after self-cal, rms=0.228495Jy sigma=1.671456 ! Inverting map ! Added new window around map position (3, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0921247 Jy ! Component: 100 - total flux cleaned = 0.143585 Jy ! Total flux subtracted in 100 components = 0.143585 Jy ! Clean residual min=-0.017458 max=0.045744 Jy/beam ! Clean residual mean=-0.000003 rms=0.004584 Jy/beam ! Combined flux in latest and established models = 0.410528 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.410528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163733Jy sigma=1.188901 ! Fit after self-cal, rms=0.158752Jy sigma=1.149975 ! Inverting map ! Added new window around map position (1.4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0496015 Jy ! Component: 100 - total flux cleaned = 0.0852992 Jy ! Total flux subtracted in 100 components = 0.0852992 Jy ! Clean residual min=-0.011782 max=0.021581 Jy/beam ! Clean residual mean=-0.000003 rms=0.003224 Jy/beam ! Combined flux in latest and established models = 0.495827 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.495827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125366Jy sigma=0.910341 ! Fit after self-cal, rms=0.124494Jy sigma=0.902313 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295968 Jy ! Component: 100 - total flux cleaned = 0.0529428 Jy ! Total flux subtracted in 100 components = 0.0529428 Jy ! Clean residual min=-0.009965 max=0.017803 Jy/beam ! Clean residual mean=-0.000003 rms=0.002645 Jy/beam ! Combined flux in latest and established models = 0.54877 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.548769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107280Jy sigma=0.780617 ! Fit after self-cal, rms=0.107133Jy sigma=0.779036 ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204912 Jy ! Component: 100 - total flux cleaned = 0.0376813 Jy ! Total flux subtracted in 100 components = 0.0376813 Jy ! Clean residual min=-0.008898 max=0.012118 Jy/beam ! Clean residual mean=-0.000003 rms=0.002330 Jy/beam ! Combined flux in latest and established models = 0.586451 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 54 components and 0.586451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097052Jy sigma=0.709231 ! Fit after self-cal, rms=0.097024Jy sigma=0.709058 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9904 mas, bmaj=1.447 mas, bpa=-21.91 degrees ! Estimated noise=0.513595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290335 Jy ! Component: 100 - total flux cleaned = 0.0510287 Jy ! Component: 150 - total flux cleaned = 0.068564 Jy ! Component: 200 - total flux cleaned = 0.0827659 Jy ! Total flux subtracted in 200 components = 0.0827659 Jy ! Clean residual min=-0.010004 max=0.015639 Jy/beam ! Clean residual mean=-0.000025 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 0.669217 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 104 components and 0.669216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081783Jy sigma=0.605220 ! Fit after self-cal, rms=0.081570Jy sigma=0.603699 ! Inverting map ! Added new window around map position (0, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152329 Jy ! Component: 100 - total flux cleaned = 0.0257916 Jy ! Component: 150 - total flux cleaned = 0.0345284 Jy ! Component: 200 - total flux cleaned = 0.0407335 Jy ! Total flux subtracted in 200 components = 0.0407335 Jy ! Clean residual min=-0.009726 max=0.011027 Jy/beam ! Clean residual mean=-0.000020 rms=0.002186 Jy/beam ! Combined flux in latest and established models = 0.70995 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 136 components and 0.70995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076996Jy sigma=0.573628 ! Fit after self-cal, rms=0.076752Jy sigma=0.571826 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9904 x 1.447 at -21.91 degrees (North through East) ! Clean map min=-0.00987 max=0.27204 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 0.91 KP 1.06 ! LA 0.96 MK 1.06 NL 1.18 OV 0.98 ! PT 0.88 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.96 HN 0.93 KP 1.05 ! LA 0.95 MK 1.05 NL 1.18 OV 0.99 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.96 HN 0.93 KP 1.05 ! LA 0.97 MK 1.02 NL 1.16 OV 0.99 ! PT 0.90 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.97 HN 0.91 KP 1.05 ! LA 0.97 MK 1.05 NL 1.17 OV 1.00 ! PT 0.88 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.93 KP 1.07 ! LA 0.96 MK 1.05 NL 1.18 OV 1.00 ! PT 0.89 SC 1.08 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.93 KP 1.06 ! LA 0.98 MK 1.06 NL 1.19 OV 0.99 ! PT 0.89 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.96 KP 1.06 ! LA 0.96 MK 1.05 NL 1.18 OV 1.00 ! PT 0.89 SC 1.06 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.95 KP 1.05 ! LA 0.98 MK 1.05 NL 1.20 OV 1.00 ! PT 0.89 SC 1.10 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.96 KP 1.08 ! LA 0.97 MK 1.04 NL 1.18 OV 1.01 ! PT 0.90 SC 1.07 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.96 KP 1.05 ! LA 0.98 MK 1.06 NL 1.18 OV 1.01 ! PT 0.89 SC 1.13 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.96 KP 1.07 ! LA 0.99 MK 1.09 NL 1.18 OV 1.03 ! PT 0.89 SC 1.14 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.02 KP 1.04 ! LA 0.98 MK 1.07 NL 1.17 OV 1.04 ! PT 0.89 SC 1.18 ! ! ! Fit before self-cal, rms=0.076752Jy sigma=0.571826 ! Fit after self-cal, rms=0.067895Jy sigma=0.494795 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=1.464 mas, bpa=-22.06 degrees ! Estimated noise=0.517285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181485 Jy ! Component: 100 - total flux cleaned = 0.00129753 Jy ! Component: 150 - total flux cleaned = 0.000875178 Jy ! Component: 200 - total flux cleaned = 0.000871623 Jy ! Total flux subtracted in 200 components = 0.000871623 Jy ! Clean residual min=-0.005884 max=0.005550 Jy/beam ! Clean residual mean=-0.000002 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.710821 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 156 components and 0.710821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067028Jy sigma=0.488603 ! Fit after self-cal, rms=0.067026Jy sigma=0.488270 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067026Jy sigma=0.488270 ! Fit after self-cal, rms=0.067964Jy sigma=0.461747 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=1.446 mas, bpa=-20.56 degrees ! Estimated noise=0.518349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00262872 Jy ! Component: 100 - total flux cleaned = -0.0026253 Jy ! Component: 150 - total flux cleaned = -0.00276958 Jy ! Component: 200 - total flux cleaned = -0.00302104 Jy ! Total flux subtracted in 200 components = -0.00302104 Jy ! Clean residual min=-0.003206 max=0.003238 Jy/beam ! Clean residual mean=-0.000002 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.7078 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 175 components and 0.7078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067232Jy sigma=0.455659 ! Fit after self-cal, rms=0.067253Jy sigma=0.455512 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79606e-05 Jy ! Component: 100 - total flux cleaned = -0.000116467 Jy ! Component: 150 - total flux cleaned = -0.000115572 Jy ! Component: 200 - total flux cleaned = -0.000112942 Jy ! Total flux subtracted in 200 components = -0.000112942 Jy ! Clean residual min=-0.002973 max=0.003031 Jy/beam ! Clean residual mean=-0.000002 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.707687 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 190 components and 0.707688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067022Jy sigma=0.453538 ! Fit after self-cal, rms=0.067015Jy sigma=0.453492 ! Inverting map ! Added new window around map position (10.2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206598 Jy ! Component: 100 - total flux cleaned = 0.00235875 Jy ! Component: 150 - total flux cleaned = 0.00242518 Jy ! Component: 200 - total flux cleaned = 0.00242314 Jy ! Total flux subtracted in 200 components = 0.00242314 Jy ! Clean residual min=-0.002677 max=0.002774 Jy/beam ! Clean residual mean=-0.000001 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.710111 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 199 components and 0.710111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066852Jy sigma=0.452046 ! Fit after self-cal, rms=0.066848Jy sigma=0.452018 ! Inverting map ! Added new window around map position (2.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157243 Jy ! Component: 100 - total flux cleaned = 0.00163603 Jy ! Component: 150 - total flux cleaned = 0.00163486 Jy ! Component: 200 - total flux cleaned = 0.00147263 Jy ! Total flux subtracted in 200 components = 0.00147263 Jy ! Clean residual min=-0.002605 max=0.002462 Jy/beam ! Clean residual mean=-0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.711583 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 212 components and 0.711583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066725Jy sigma=0.450925 ! Fit after self-cal, rms=0.066721Jy sigma=0.450890 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066721Jy sigma=0.450890 ! Fit after self-cal, rms=0.067743Jy sigma=0.449523 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9999 mas, bmaj=1.438 mas, bpa=-20.27 degrees ! Estimated noise=0.519627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159664 Jy ! Component: 100 - total flux cleaned = -0.0022407 Jy ! Component: 150 - total flux cleaned = -0.00273232 Jy ! Component: 200 - total flux cleaned = -0.00285778 Jy ! Total flux subtracted in 200 components = -0.00285778 Jy ! Clean residual min=-0.002154 max=0.001998 Jy/beam ! Clean residual mean=-0.000002 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.708726 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 219 components and 0.708726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067574Jy sigma=0.447990 ! Fit after self-cal, rms=0.067578Jy sigma=0.447964 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.69722e-06 Jy ! Component: 100 - total flux cleaned = -9.95912e-06 Jy ! Component: 150 - total flux cleaned = -5.99215e-05 Jy ! Component: 200 - total flux cleaned = -0.000150675 Jy ! Total flux subtracted in 200 components = -0.000150675 Jy ! Clean residual min=-0.002042 max=0.001979 Jy/beam ! Clean residual mean=-0.000002 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.708575 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 228 components and 0.708575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067505Jy sigma=0.447368 ! Fit after self-cal, rms=0.067504Jy sigma=0.447356 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067504Jy sigma=0.447356 ! Fit after self-cal, rms=0.068063Jy sigma=0.447011 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.211 mas, bmaj=2.415 mas, bpa=-5.249 degrees ! Estimated noise=0.67528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122682 Jy ! Component: 100 - total flux cleaned = -0.00144717 Jy ! Component: 150 - total flux cleaned = -0.00154258 Jy ! Component: 200 - total flux cleaned = -0.00170527 Jy ! Total flux subtracted in 200 components = -0.00170527 Jy ! Clean residual min=-0.002014 max=0.002158 Jy/beam ! Clean residual mean=-0.000006 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.70687 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 235 components and 0.70687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067998Jy sigma=0.446482 ! Fit after self-cal, rms=0.068000Jy sigma=0.446470 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152886 Jy ! Component: 100 - total flux cleaned = -0.000390052 Jy ! Component: 150 - total flux cleaned = -0.000607199 Jy ! Component: 200 - total flux cleaned = -0.00075121 Jy ! Total flux subtracted in 200 components = -0.00075121 Jy ! Clean residual min=-0.001909 max=0.002163 Jy/beam ! Clean residual mean=-0.000006 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.706119 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 245 components and 0.706119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067975Jy sigma=0.446248 ! Fit after self-cal, rms=0.067974Jy sigma=0.446244 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.433 mas, bpa=-20.1 degrees ! Estimated noise=0.520457 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1 x 1.433 at -20.1 degrees (North through East) ! Clean map min=-0.0016952 max=0.27113 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7688 mas, bmaj=1.178 mas, bpa=-23.22 degrees ! Estimated noise=1.00475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197073 Jy ! Component: 100 - total flux cleaned = 0.302362 Jy ! Component: 150 - total flux cleaned = 0.37352 Jy ! Component: 200 - total flux cleaned = 0.427018 Jy ! Total flux subtracted in 200 components = 0.427018 Jy ! Clean residual min=-0.012810 max=0.031613 Jy/beam ! Clean residual mean=-0.000003 rms=0.003537 Jy/beam ! Combined flux in latest and established models = 0.427018 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.427018 Jy ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.433 mas, bpa=-20.1 degrees ! Estimated noise=0.520457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0695632 Jy ! Component: 100 - total flux cleaned = 0.116637 Jy ! Component: 150 - total flux cleaned = 0.150266 Jy ! Component: 200 - total flux cleaned = 0.175177 Jy ! Total flux subtracted in 200 components = 0.175177 Jy ! Clean residual min=-0.005402 max=0.014393 Jy/beam ! Clean residual mean=-0.000019 rms=0.002051 Jy/beam ! Combined flux in latest and established models = 0.602194 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 54 components and 0.602194 Jy ! Inverting map ! Added new window around map position (-0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189636 Jy ! Component: 100 - total flux cleaned = 0.0335999 Jy ! Component: 150 - total flux cleaned = 0.0450754 Jy ! Component: 200 - total flux cleaned = 0.0542136 Jy ! Total flux subtracted in 200 components = 0.0542136 Jy ! Clean residual min=-0.002844 max=0.005461 Jy/beam ! Clean residual mean=-0.000010 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.656408 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 91 components and 0.656408 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737774 Jy ! Component: 100 - total flux cleaned = 0.0133894 Jy ! Component: 150 - total flux cleaned = 0.0183901 Jy ! Component: 200 - total flux cleaned = 0.0225936 Jy ! Total flux subtracted in 200 components = 0.0225936 Jy ! Clean residual min=-0.002116 max=0.002914 Jy/beam ! Clean residual mean=-0.000006 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.679001 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 117 components and 0.679001 Jy ! Inverting map ! Added new window around map position (-1.8, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362869 Jy ! Component: 100 - total flux cleaned = 0.00672785 Jy ! Component: 150 - total flux cleaned = 0.00941798 Jy ! Component: 200 - total flux cleaned = 0.0116731 Jy ! Total flux subtracted in 200 components = 0.0116731 Jy ! Clean residual min=-0.001968 max=0.002466 Jy/beam ! Clean residual mean=-0.000005 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.690674 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 142 components and 0.690674 Jy ! Inverting map ! Added new window around map position (-2.2, 25.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231585 Jy ! Component: 100 - total flux cleaned = 0.00393198 Jy ! Component: 150 - total flux cleaned = 0.00553003 Jy ! Component: 200 - total flux cleaned = 0.00672788 Jy ! Total flux subtracted in 200 components = 0.00672788 Jy ! Clean residual min=-0.001879 max=0.001887 Jy/beam ! Clean residual mean=-0.000004 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.697402 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 162 components and 0.697402 Jy ! Inverting map ! Added new window around map position (-28.8, -30.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147522 Jy ! Component: 100 - total flux cleaned = 0.00241703 Jy ! Component: 150 - total flux cleaned = 0.00308497 Jy ! Component: 200 - total flux cleaned = 0.00371432 Jy ! Total flux subtracted in 200 components = 0.00371432 Jy ! Clean residual min=-0.001837 max=0.001682 Jy/beam ! Clean residual mean=-0.000003 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.701116 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 180 components and 0.701116 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.211 mas, bmaj=2.415 mas, bpa=-5.249 degrees ! Estimated noise=0.67528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193266 Jy ! Component: 100 - total flux cleaned = 0.00328551 Jy ! Component: 150 - total flux cleaned = 0.00407803 Jy ! Component: 200 - total flux cleaned = 0.00465497 Jy ! Total flux subtracted in 200 components = 0.00465497 Jy ! Clean residual min=-0.001958 max=0.002190 Jy/beam ! Clean residual mean=-0.000006 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.705771 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.2, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160602 Jy ! Component: 100 - total flux cleaned = 0.00219157 Jy ! Component: 150 - total flux cleaned = 0.00256445 Jy ! Component: 200 - total flux cleaned = 0.00276976 Jy ! Total flux subtracted in 200 components = 0.00276976 Jy ! Clean residual min=-0.001875 max=0.001834 Jy/beam ! Clean residual mean=-0.000005 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.708541 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 242 components and 0.708541 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.433 mas, bpa=-20.1 degrees ! Estimated noise=0.520457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390124 Jy ! Component: 100 - total flux cleaned = -0.000574401 Jy ! Component: 150 - total flux cleaned = -0.000784496 Jy ! Component: 200 - total flux cleaned = -0.000980041 Jy ! Total flux subtracted in 200 components = -0.000980041 Jy ! Clean residual min=-0.001583 max=0.001511 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.707561 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 266 components and 0.707561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067724Jy sigma=0.444082 ! Fit after self-cal, rms=0.067703Jy sigma=0.443887 wmodel J1153+4036_X_map.mod ! Writing 266 model components to file: J1153+4036_X_map.mod wobs J1153+4036_X_uvs.fits ! Writing UV FITS file: J1153+4036_X_uvs.fits wwins J1153+4036_X_map.win ! wwins: Wrote 13 windows to J1153+4036_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220325 Jy ! Component: 100 - total flux cleaned = -0.000271521 Jy ! Component: 150 - total flux cleaned = -0.000296544 Jy ! Component: 200 - total flux cleaned = -0.000344227 Jy ! Component: 250 - total flux cleaned = -0.000320804 Jy ! Component: 300 - total flux cleaned = -0.000320732 Jy ! Component: 350 - total flux cleaned = -0.00032053 Jy ! Component: 400 - total flux cleaned = -0.000342139 Jy ! Component: 450 - total flux cleaned = -0.000405742 Jy ! Component: 500 - total flux cleaned = -0.000426691 Jy ! Component: 550 - total flux cleaned = -0.000467513 Jy ! Component: 600 - total flux cleaned = -0.000487069 Jy ! Component: 650 - total flux cleaned = -0.000447036 Jy ! Component: 700 - total flux cleaned = -0.000349786 Jy ! Component: 750 - total flux cleaned = -0.000311709 Jy ! Component: 800 - total flux cleaned = -0.000218042 Jy ! Component: 850 - total flux cleaned = -0.000236985 Jy ! Component: 900 - total flux cleaned = -0.000182266 Jy ! Component: 950 - total flux cleaned = -0.000200434 Jy ! Component: 1000 - total flux cleaned = -0.000128729 Jy ! Component: 1050 - total flux cleaned = -5.37007e-06 Jy ! Component: 1100 - total flux cleaned = -5.5637e-06 Jy ! Component: 1150 - total flux cleaned = 2.86686e-05 Jy ! Component: 1200 - total flux cleaned = 6.297e-05 Jy ! Component: 1250 - total flux cleaned = 0.000113532 Jy ! Component: 1300 - total flux cleaned = 0.000213276 Jy ! Component: 1350 - total flux cleaned = 0.000213225 Jy ! Component: 1400 - total flux cleaned = 0.000311025 Jy ! Component: 1450 - total flux cleaned = 0.000311053 Jy ! Component: 1500 - total flux cleaned = 0.000343057 Jy ! Component: 1550 - total flux cleaned = 0.000406326 Jy ! Component: 1600 - total flux cleaned = 0.000390795 Jy ! Component: 1650 - total flux cleaned = 0.000406508 Jy ! Component: 1700 - total flux cleaned = 0.000421742 Jy ! Component: 1750 - total flux cleaned = 0.000436964 Jy ! Component: 1800 - total flux cleaned = 0.000437068 Jy ! Component: 1850 - total flux cleaned = 0.000466742 Jy ! Component: 1900 - total flux cleaned = 0.000466436 Jy ! Component: 1950 - total flux cleaned = 0.000437125 Jy ! Component: 2000 - total flux cleaned = 0.000437153 Jy ! Component: 2050 - total flux cleaned = 0.000451682 Jy ! Component: 2100 - total flux cleaned = 0.00048036 Jy ! Component: 2150 - total flux cleaned = 0.000466223 Jy ! Component: 2200 - total flux cleaned = 0.000480197 Jy ! Component: 2250 - total flux cleaned = 0.000466391 Jy ! Component: 2300 - total flux cleaned = 0.000507661 Jy ! Component: 2350 - total flux cleaned = 0.000576033 Jy ! Component: 2400 - total flux cleaned = 0.00058942 Jy ! Component: 2450 - total flux cleaned = 0.000549052 Jy ! Component: 2500 - total flux cleaned = 0.000655673 Jy ! Component: 2550 - total flux cleaned = 0.000668804 Jy ! Component: 2600 - total flux cleaned = 0.000668872 Jy ! Component: 2650 - total flux cleaned = 0.000681999 Jy ! Component: 2700 - total flux cleaned = 0.000707962 Jy ! Component: 2750 - total flux cleaned = 0.000785141 Jy ! Component: 2800 - total flux cleaned = 0.000810746 Jy ! Component: 2850 - total flux cleaned = 0.000873982 Jy ! Component: 2900 - total flux cleaned = 0.000861251 Jy ! Component: 2950 - total flux cleaned = 0.000898772 Jy ! Component: 3000 - total flux cleaned = 0.000948137 Jy ! Component: 3050 - total flux cleaned = 0.0009357 Jy ! Component: 3100 - total flux cleaned = 0.00097232 Jy ! Component: 3150 - total flux cleaned = 0.00103299 Jy ! Component: 3200 - total flux cleaned = 0.00106925 Jy ! Component: 3250 - total flux cleaned = 0.00110533 Jy ! Component: 3300 - total flux cleaned = 0.00112908 Jy ! Component: 3350 - total flux cleaned = 0.00115273 Jy ! Component: 3400 - total flux cleaned = 0.00118806 Jy ! Component: 3450 - total flux cleaned = 0.00121136 Jy ! Component: 3500 - total flux cleaned = 0.00122298 Jy ! Component: 3550 - total flux cleaned = 0.00123444 Jy ! Component: 3600 - total flux cleaned = 0.00129201 Jy ! Component: 3650 - total flux cleaned = 0.00132615 Jy ! Component: 3700 - total flux cleaned = 0.00133759 Jy ! Component: 3750 - total flux cleaned = 0.00138263 Jy ! Component: 3800 - total flux cleaned = 0.00138283 Jy ! Component: 3850 - total flux cleaned = 0.00142734 Jy ! Component: 3900 - total flux cleaned = 0.00144935 Jy ! Component: 3950 - total flux cleaned = 0.00142734 Jy ! Component: 4000 - total flux cleaned = 0.00146031 Jy ! Component: 4050 - total flux cleaned = 0.00150376 Jy ! Total flux subtracted in 4096 components = 0.0015146 Jy ! Clean residual min=-0.000662 max=0.000560 Jy/beam ! Clean residual mean=-0.000001 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.709076 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 596 components and 0.709076 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1153+4036_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1 x 1.433 at -20.1 degrees (North through East) ! Clean map min=-0.0010229 max=0.27323 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1153+4036_X_map.fits wmodel /image_prod/ug002_uva//J1153+4036_X_map.mod ! Writing 596 model components to file: /image_prod/ug002_uva//J1153+4036_X_map.mod wobs /image_prod/ug002_uva//J1153+4036_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1153+4036_X_uvs.fits wwins /image_prod/ug002_uva//J1153+4036_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J1153+4036_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.273231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018606 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.204288 0.204288 0.408576 0.817153 1.63431 3.26861 6.53722 13.0744 26.1489 52.2978 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.273 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1468.51 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1153+4036_X_dfm.log closed on Thu Mar 5 00:17:25 2020