! Started logfile: /image_prod/ug002_uva//J1152+4939_X_dfm.log on Thu Mar 5 00:16:07 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1152+4939_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1152+4939_X_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955556 visibilities/baseline/integration-bin. ! Found source: J1152+4939 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23220 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1152+4939_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.167264Jy sigma=8.213791 ! Fit after self-cal, rms=0.425352Jy sigma=2.994992 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7448 mas, bmaj=1.123 mas, bpa=-28.88 degrees ! Estimated noise=1.24591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.447725 Jy ! Component: 100 - total flux cleaned = 0.546219 Jy ! Total flux subtracted in 100 components = 0.546219 Jy ! Clean residual min=-0.017144 max=0.031540 Jy/beam ! Clean residual mean=0.000043 rms=0.003927 Jy/beam ! Combined flux in latest and established models = 0.546219 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.546219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115933Jy sigma=0.792937 ! Fit after self-cal, rms=0.115929Jy sigma=0.792903 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331404 Jy ! Component: 100 - total flux cleaned = 0.0469357 Jy ! Total flux subtracted in 100 components = 0.0469357 Jy ! Clean residual min=-0.013804 max=0.021588 Jy/beam ! Clean residual mean=0.000027 rms=0.003495 Jy/beam ! Combined flux in latest and established models = 0.593155 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.593155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104473Jy sigma=0.713357 ! Fit after self-cal, rms=0.104464Jy sigma=0.713300 ! Inverting map ! Added new window around map position (-1.8, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164058 Jy ! Component: 100 - total flux cleaned = 0.0198412 Jy ! Total flux subtracted in 100 components = 0.0198412 Jy ! Clean residual min=-0.013806 max=0.020194 Jy/beam ! Clean residual mean=0.000020 rms=0.003306 Jy/beam ! Combined flux in latest and established models = 0.612996 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.612996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100044Jy sigma=0.683408 ! Fit after self-cal, rms=0.099745Jy sigma=0.681083 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9921 mas, bmaj=1.364 mas, bpa=-26.92 degrees ! Estimated noise=0.667904 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230203 Jy ! Component: 100 - total flux cleaned = 0.0379905 Jy ! Component: 150 - total flux cleaned = 0.040814 Jy ! Component: 200 - total flux cleaned = 0.0440449 Jy ! Total flux subtracted in 200 components = 0.0440449 Jy ! Clean residual min=-0.014419 max=0.017151 Jy/beam ! Clean residual mean=-0.000001 rms=0.003094 Jy/beam ! Combined flux in latest and established models = 0.657041 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 0.657041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092556Jy sigma=0.632403 ! Fit after self-cal, rms=0.092335Jy sigma=0.630587 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9921 x 1.364 at -26.92 degrees (North through East) ! Clean map min=-0.013898 max=0.58076 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.95 KP 1.06 ! LA 0.97 MK 1.05 NL 1.19 OV 0.98 ! PT 0.90 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.97 KP 1.05 ! LA 0.96 MK 1.05 NL 1.19 OV 0.98 ! PT 0.90 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.98 KP 1.05 ! LA 0.98 MK 1.01 NL 1.19 OV 0.98 ! PT 0.91 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.95 KP 1.05 ! LA 0.98 MK 1.05 NL 1.18 OV 0.99 ! PT 0.89 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.97 KP 1.06 ! LA 0.98 MK 1.05 NL 1.18 OV 1.00 ! PT 0.90 SC 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.98 KP 1.07 ! LA 0.98 MK 1.07 NL 1.19 OV 0.97 ! PT 0.91 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.99 KP 1.05 ! LA 0.98 MK 1.06 NL 1.20 OV 0.98 ! PT 0.90 SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.98 KP 1.05 ! LA 0.98 MK 1.08 NL 1.18 OV 0.98 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.00 KP 1.06 ! LA 0.97 MK 1.06 NL 1.17 OV 0.98 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 1.00 KP 1.03 ! LA 0.99 MK 1.07 NL 1.21 OV 0.99 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.00 KP 1.06 ! LA 0.98 MK 1.10 NL 1.18 OV 1.01 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.03 KP 1.05 ! LA 0.98 MK 1.09 NL 1.18 OV 1.02 ! PT 0.89 SC 0.97 ! ! ! Fit before self-cal, rms=0.092335Jy sigma=0.630587 ! Fit after self-cal, rms=0.071298Jy sigma=0.479983 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.356 mas, bpa=-25.67 degrees ! Estimated noise=0.664548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0145108 Jy ! Component: 100 - total flux cleaned = -0.0199692 Jy ! Component: 150 - total flux cleaned = -0.0219252 Jy ! Component: 200 - total flux cleaned = -0.0231815 Jy ! Total flux subtracted in 200 components = -0.0231815 Jy ! Clean residual min=-0.005890 max=0.009211 Jy/beam ! Clean residual mean=-0.000001 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.633859 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.633859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068281Jy sigma=0.456115 ! Fit after self-cal, rms=0.068250Jy sigma=0.455692 ! Inverting map ! Added new window around map position (-2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391316 Jy ! Component: 100 - total flux cleaned = 0.00292744 Jy ! Component: 150 - total flux cleaned = 0.0022774 Jy ! Component: 200 - total flux cleaned = 0.00155606 Jy ! Total flux subtracted in 200 components = 0.00155606 Jy ! Clean residual min=-0.005242 max=0.006440 Jy/beam ! Clean residual mean=-0.000001 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.635415 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.635416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066947Jy sigma=0.447917 ! Fit after self-cal, rms=0.066883Jy sigma=0.447423 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066883Jy sigma=0.447423 ! Fit after self-cal, rms=0.062167Jy sigma=0.414760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=1.361 mas, bpa=-26.15 degrees ! Estimated noise=0.665518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00605789 Jy ! Component: 100 - total flux cleaned = -0.00884771 Jy ! Component: 150 - total flux cleaned = -0.010384 Jy ! Component: 200 - total flux cleaned = -0.0109332 Jy ! Total flux subtracted in 200 components = -0.0109332 Jy ! Clean residual min=-0.003025 max=0.002521 Jy/beam ! Clean residual mean=-0.000001 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.624482 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.624482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061436Jy sigma=0.409638 ! Fit after self-cal, rms=0.061440Jy sigma=0.409484 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.74746e-05 Jy ! Component: 100 - total flux cleaned = -0.000310108 Jy ! Component: 150 - total flux cleaned = -0.000442192 Jy ! Component: 200 - total flux cleaned = -0.000503266 Jy ! Total flux subtracted in 200 components = -0.000503266 Jy ! Clean residual min=-0.002733 max=0.002457 Jy/beam ! Clean residual mean=-0.000001 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.623979 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.623979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061287Jy sigma=0.408461 ! Fit after self-cal, rms=0.061283Jy sigma=0.408441 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061283Jy sigma=0.408441 ! Fit after self-cal, rms=0.061208Jy sigma=0.407227 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=1.36 mas, bpa=-26.07 degrees ! Estimated noise=0.665222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00295084 Jy ! Component: 100 - total flux cleaned = -0.00424021 Jy ! Component: 150 - total flux cleaned = -0.00495479 Jy ! Component: 200 - total flux cleaned = -0.00520945 Jy ! Total flux subtracted in 200 components = -0.00520945 Jy ! Clean residual min=-0.002332 max=0.002107 Jy/beam ! Clean residual mean=-0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.61877 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.61877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060989Jy sigma=0.405709 ! Fit after self-cal, rms=0.060988Jy sigma=0.405693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.15207e-05 Jy ! Component: 100 - total flux cleaned = -4.1371e-05 Jy ! Component: 150 - total flux cleaned = 9.18577e-06 Jy ! Component: 200 - total flux cleaned = 9.74808e-06 Jy ! Total flux subtracted in 200 components = 9.74808e-06 Jy ! Clean residual min=-0.002169 max=0.002026 Jy/beam ! Clean residual mean=-0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.61878 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 0.61878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060910Jy sigma=0.405155 ! Fit after self-cal, rms=0.060908Jy sigma=0.405149 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060908Jy sigma=0.405149 ! Fit after self-cal, rms=0.060901Jy sigma=0.404742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=2.405 mas, bpa=-34.54 degrees ! Estimated noise=0.848448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203124 Jy ! Component: 100 - total flux cleaned = -0.00279455 Jy ! Component: 150 - total flux cleaned = -0.00308567 Jy ! Component: 200 - total flux cleaned = -0.00322568 Jy ! Total flux subtracted in 200 components = -0.00322568 Jy ! Clean residual min=-0.002168 max=0.001830 Jy/beam ! Clean residual mean=-0.000005 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.615554 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.615554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060850Jy sigma=0.404330 ! Fit after self-cal, rms=0.060850Jy sigma=0.404318 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.1258e-05 Jy ! Component: 100 - total flux cleaned = -8.74307e-05 Jy ! Component: 150 - total flux cleaned = -0.000138401 Jy ! Component: 200 - total flux cleaned = -0.000161715 Jy ! Total flux subtracted in 200 components = -0.000161715 Jy ! Clean residual min=-0.002167 max=0.001789 Jy/beam ! Clean residual mean=-0.000005 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.615392 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.615392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060836Jy sigma=0.404194 ! Fit after self-cal, rms=0.060835Jy sigma=0.404191 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=1.359 mas, bpa=-26.03 degrees ! Estimated noise=0.664962 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.001 x 1.359 at -26.03 degrees (North through East) ! Clean map min=-0.0029391 max=0.57934 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060835Jy sigma=0.404191 ! Fit after self-cal, rms=0.057121Jy sigma=0.372718 ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=1.358 mas, bpa=-25.99 degrees ! Estimated noise=0.665436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000884864 Jy ! Component: 100 - total flux cleaned = -0.0011501 Jy ! Component: 150 - total flux cleaned = -0.00119594 Jy ! Component: 200 - total flux cleaned = -0.00119635 Jy ! Total flux subtracted in 200 components = -0.00119635 Jy ! Clean residual min=-0.001733 max=0.001812 Jy/beam ! Clean residual mean=-0.000003 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.614196 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.614196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057032Jy sigma=0.372135 ! Fit after self-cal, rms=0.057029Jy sigma=0.372127 ! Inverting map ! Added new window around map position (2.2, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000968779 Jy ! Component: 100 - total flux cleaned = 0.00110408 Jy ! Component: 150 - total flux cleaned = 0.001026 Jy ! Component: 200 - total flux cleaned = 0.000951699 Jy ! Total flux subtracted in 200 components = 0.000951699 Jy ! Clean residual min=-0.001570 max=0.001610 Jy/beam ! Clean residual mean=-0.000004 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.615148 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 148 components and 0.615147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056954Jy sigma=0.371633 ! Fit after self-cal, rms=0.056953Jy sigma=0.371626 ! Inverting map ! Added new window around map position (-9, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.56418e-05 Jy ! Component: 100 - total flux cleaned = -0.00034194 Jy ! Component: 150 - total flux cleaned = -0.000452559 Jy ! Component: 200 - total flux cleaned = -0.000521148 Jy ! Total flux subtracted in 200 components = -0.000521148 Jy ! Clean residual min=-0.001519 max=0.001522 Jy/beam ! Clean residual mean=-0.000004 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.614626 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 163 components and 0.614626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056885Jy sigma=0.371160 ! Fit after self-cal, rms=0.056882Jy sigma=0.371144 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056882Jy sigma=0.371144 ! Fit after self-cal, rms=0.056884Jy sigma=0.371018 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7534 mas, bmaj=1.119 mas, bpa=-28.16 degrees ! Estimated noise=1.24916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.448861 Jy ! Component: 100 - total flux cleaned = 0.547054 Jy ! Component: 150 - total flux cleaned = 0.577735 Jy ! Component: 200 - total flux cleaned = 0.592964 Jy ! Total flux subtracted in 200 components = 0.592964 Jy ! Clean residual min=-0.004827 max=0.007064 Jy/beam ! Clean residual mean=0.000007 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.592964 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.592964 Jy ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=1.358 mas, bpa=-25.99 degrees ! Estimated noise=0.665312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091494 Jy ! Component: 100 - total flux cleaned = 0.0143679 Jy ! Component: 150 - total flux cleaned = 0.0176989 Jy ! Component: 200 - total flux cleaned = 0.0194478 Jy ! Total flux subtracted in 200 components = 0.0194478 Jy ! Clean residual min=-0.001943 max=0.001951 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.612412 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.612412 Jy ! Inverting map ! Added new window around map position (-9, -9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138678 Jy ! Component: 100 - total flux cleaned = 0.00222025 Jy ! Component: 150 - total flux cleaned = 0.00280915 Jy ! Component: 200 - total flux cleaned = 0.00314578 Jy ! Total flux subtracted in 200 components = 0.00314578 Jy ! Clean residual min=-0.001841 max=0.001682 Jy/beam ! Clean residual mean=-0.000002 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.615557 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 0.615558 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=2.406 mas, bpa=-34.91 degrees ! Estimated noise=0.84891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000598888 Jy ! Component: 100 - total flux cleaned = 0.000645855 Jy ! Component: 150 - total flux cleaned = 0.000646693 Jy ! Component: 200 - total flux cleaned = 0.000686981 Jy ! Total flux subtracted in 200 components = 0.000686981 Jy ! Clean residual min=-0.001649 max=0.001635 Jy/beam ! Clean residual mean=-0.000004 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.616245 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.63201e-05 Jy ! Component: 100 - total flux cleaned = -3.53359e-05 Jy ! Component: 150 - total flux cleaned = -3.52816e-05 Jy ! Component: 200 - total flux cleaned = -3.53868e-05 Jy ! Total flux subtracted in 200 components = -3.53868e-05 Jy ! Clean residual min=-0.001670 max=0.001545 Jy/beam ! Clean residual mean=-0.000004 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.616209 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.616209 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=1.358 mas, bpa=-25.99 degrees ! Estimated noise=0.665312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039485 Jy ! Component: 100 - total flux cleaned = -0.000340412 Jy ! Component: 150 - total flux cleaned = -0.000290552 Jy ! Component: 200 - total flux cleaned = -0.000290016 Jy ! Total flux subtracted in 200 components = -0.000290016 Jy ! Clean residual min=-0.001494 max=0.001492 Jy/beam ! Clean residual mean=-0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.615919 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.615919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056999Jy sigma=0.371430 ! Fit after self-cal, rms=0.056974Jy sigma=0.371277 wmodel J1152+4939_X_map.mod ! Writing 90 model components to file: J1152+4939_X_map.mod wobs J1152+4939_X_uvs.fits ! Writing UV FITS file: J1152+4939_X_uvs.fits wwins J1152+4939_X_map.win ! wwins: Wrote 7 windows to J1152+4939_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245353 Jy ! Component: 100 - total flux cleaned = 0.000478771 Jy ! Component: 150 - total flux cleaned = 0.000604647 Jy ! Component: 200 - total flux cleaned = 0.000726758 Jy ! Component: 250 - total flux cleaned = 0.000892711 Jy ! Component: 300 - total flux cleaned = 0.000915953 Jy ! Component: 350 - total flux cleaned = 0.000916048 Jy ! Component: 400 - total flux cleaned = 0.00091632 Jy ! Component: 450 - total flux cleaned = 0.000916727 Jy ! Component: 500 - total flux cleaned = 0.000960062 Jy ! Component: 550 - total flux cleaned = 0.000959898 Jy ! Component: 600 - total flux cleaned = 0.000939007 Jy ! Component: 650 - total flux cleaned = 0.000939209 Jy ! Component: 700 - total flux cleaned = 0.000979865 Jy ! Component: 750 - total flux cleaned = 0.000940001 Jy ! Component: 800 - total flux cleaned = 0.000979474 Jy ! Component: 850 - total flux cleaned = 0.00101867 Jy ! Component: 900 - total flux cleaned = 0.00101887 Jy ! Component: 950 - total flux cleaned = 0.00100001 Jy ! Component: 1000 - total flux cleaned = 0.0011131 Jy ! Component: 1050 - total flux cleaned = 0.00115027 Jy ! Component: 1100 - total flux cleaned = 0.00120497 Jy ! Component: 1150 - total flux cleaned = 0.00120475 Jy ! Component: 1200 - total flux cleaned = 0.00127674 Jy ! Component: 1250 - total flux cleaned = 0.00129449 Jy ! Component: 1300 - total flux cleaned = 0.00129441 Jy ! Component: 1350 - total flux cleaned = 0.0013119 Jy ! Component: 1400 - total flux cleaned = 0.00141595 Jy ! Component: 1450 - total flux cleaned = 0.00145019 Jy ! Component: 1500 - total flux cleaned = 0.00156914 Jy ! Component: 1550 - total flux cleaned = 0.00161974 Jy ! Component: 1600 - total flux cleaned = 0.00166971 Jy ! Component: 1650 - total flux cleaned = 0.00168634 Jy ! Component: 1700 - total flux cleaned = 0.00176838 Jy ! Component: 1750 - total flux cleaned = 0.00183347 Jy ! Component: 1800 - total flux cleaned = 0.00183337 Jy ! Component: 1850 - total flux cleaned = 0.00188143 Jy ! Component: 1900 - total flux cleaned = 0.00192881 Jy ! Component: 1950 - total flux cleaned = 0.0019603 Jy ! Component: 2000 - total flux cleaned = 0.00203828 Jy ! Component: 2050 - total flux cleaned = 0.00205372 Jy ! Component: 2100 - total flux cleaned = 0.00217643 Jy ! Component: 2150 - total flux cleaned = 0.00220672 Jy ! Component: 2200 - total flux cleaned = 0.0022822 Jy ! Component: 2250 - total flux cleaned = 0.00228205 Jy ! Component: 2300 - total flux cleaned = 0.00232661 Jy ! Component: 2350 - total flux cleaned = 0.00241524 Jy ! Component: 2400 - total flux cleaned = 0.0023711 Jy ! Component: 2450 - total flux cleaned = 0.00250234 Jy ! Component: 2500 - total flux cleaned = 0.00256014 Jy ! Component: 2550 - total flux cleaned = 0.00258883 Jy ! Component: 2600 - total flux cleaned = 0.0026744 Jy ! Component: 2650 - total flux cleaned = 0.00270277 Jy ! Component: 2700 - total flux cleaned = 0.00284327 Jy ! Component: 2750 - total flux cleaned = 0.00281525 Jy ! Component: 2800 - total flux cleaned = 0.00289852 Jy ! Component: 2850 - total flux cleaned = 0.00295365 Jy ! Component: 2900 - total flux cleaned = 0.0030085 Jy ! Component: 2950 - total flux cleaned = 0.00302224 Jy ! Component: 3000 - total flux cleaned = 0.00308988 Jy ! Component: 3050 - total flux cleaned = 0.00313015 Jy ! Component: 3100 - total flux cleaned = 0.00315687 Jy ! Component: 3150 - total flux cleaned = 0.00320978 Jy ! Component: 3200 - total flux cleaned = 0.00322302 Jy ! Component: 3250 - total flux cleaned = 0.0033408 Jy ! Component: 3300 - total flux cleaned = 0.00336701 Jy ! Component: 3350 - total flux cleaned = 0.00336711 Jy ! Component: 3400 - total flux cleaned = 0.00349566 Jy ! Component: 3450 - total flux cleaned = 0.00348274 Jy ! Component: 3500 - total flux cleaned = 0.00355888 Jy ! Component: 3550 - total flux cleaned = 0.00353374 Jy ! Component: 3600 - total flux cleaned = 0.00358401 Jy ! Component: 3650 - total flux cleaned = 0.00362137 Jy ! Component: 3700 - total flux cleaned = 0.00367099 Jy ! Component: 3750 - total flux cleaned = 0.00368342 Jy ! Component: 3800 - total flux cleaned = 0.00376915 Jy ! Component: 3850 - total flux cleaned = 0.00380563 Jy ! Component: 3900 - total flux cleaned = 0.00382979 Jy ! Component: 3950 - total flux cleaned = 0.00386596 Jy ! Component: 4000 - total flux cleaned = 0.00393785 Jy ! Component: 4050 - total flux cleaned = 0.00400931 Jy ! Total flux subtracted in 4096 components = 0.00405666 Jy ! Clean residual min=-0.000591 max=0.000604 Jy/beam ! Clean residual mean=-0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.619976 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 419 components and 0.619975 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1152+4939_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.001 x 1.358 at -25.99 degrees (North through East) ! Clean map min=-0.0018132 max=0.58159 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1152+4939_X_map.fits wmodel /image_prod/ug002_uva//J1152+4939_X_map.mod ! Writing 419 model components to file: /image_prod/ug002_uva//J1152+4939_X_map.mod wobs /image_prod/ug002_uva//J1152+4939_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1152+4939_X_uvs.fits wwins /image_prod/ug002_uva//J1152+4939_X_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J1152+4939_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.581587 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197941 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.102104 0.102104 0.204207 0.408415 0.816829 1.63366 3.26732 6.53463 13.0693 26.1385 52.2771 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.581 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2938.19 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1152+4939_X_dfm.log closed on Thu Mar 5 00:16:12 2020