! Started logfile: /image_prod/ug002_uva//J1149+3559_S_dfm.log on Thu Mar  5 00:13:51 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1149+3559_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1149+3559_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.551852 visibilities/baseline/integration-bin.
! Found source: J1149+3559
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3576 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1149+3559_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.043994Jy  sigma=8.420375
! Fit after  self-cal, rms=0.766440Jy  sigma=6.257220
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.759 mas, bmaj=5.975 mas, bpa=10.92 degrees
! Estimated noise=2.09158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181949 Jy
! Component: 100  -  total flux cleaned = 0.221626 Jy
! Total flux subtracted in 100 components = 0.221626 Jy
! Clean residual min=-0.012237 max=0.011066 Jy/beam
! Clean residual mean=0.000012 rms=0.002700 Jy/beam
! Combined flux in latest and established models = 0.221626 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.221626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087659Jy  sigma=0.555866
! Fit after  self-cal, rms=0.087653Jy  sigma=0.555847
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.263 mas, bmaj=6.668 mas, bpa=10.99 degrees
! Estimated noise=1.51752 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00662815 Jy
! Component: 100  -  total flux cleaned = 0.00612836 Jy
! Component: 150  -  total flux cleaned = 0.00592174 Jy
! Component: 200  -  total flux cleaned = 0.00604909 Jy
! Total flux subtracted in 200 components = 0.00604909 Jy
! Clean residual min=-0.011680 max=0.009307 Jy/beam
! Clean residual mean=0.000032 rms=0.002660 Jy/beam
! Combined flux in latest and established models = 0.227675 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.227675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085516Jy  sigma=0.546399
! Fit after  self-cal, rms=0.085511Jy  sigma=0.546382
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.263 x 6.668 at 10.99 degrees (North through East)
! Clean map  min=-0.011288  max=0.2338 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.09     HN        1.03     KP        1.07     
!   LA        1.04     MK        1.05     NL        1.03     OV        0.82     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.06     HN        1.05     KP        1.11     
!   LA        1.08     MK        1.04     NL        0.64     OV        0.82     
!   SC        0.84     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.07     HN        1.04     KP        1.08     
!   LA        1.03     MK        1.03     NL        0.98     OV        0.90     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.085511Jy  sigma=0.546382
! Fit after  self-cal, rms=0.068290Jy  sigma=0.475933
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.246 mas, bmaj=6.697 mas, bpa=11.89 degrees
! Estimated noise=1.50923 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130485 Jy
! Component: 100  -  total flux cleaned = -3.99495e-05 Jy
! Component: 150  -  total flux cleaned = -0.000157558 Jy
! Component: 200  -  total flux cleaned = -0.000265713 Jy
! Total flux subtracted in 200 components = -0.000265713 Jy
! Clean residual min=-0.005027 max=0.004945 Jy/beam
! Clean residual mean=-0.000001 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.227409 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 26 components and 0.227409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068219Jy  sigma=0.475710
! Fit after  self-cal, rms=0.068197Jy  sigma=0.475339
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068197Jy  sigma=0.475339
! Fit after  self-cal, rms=0.064676Jy  sigma=0.447019
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=6.698 mas, bpa=11.61 degrees
! Estimated noise=1.50682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013739 Jy
! Component: 100  -  total flux cleaned = 0.00137664 Jy
! Component: 150  -  total flux cleaned = 0.0014365 Jy
! Component: 200  -  total flux cleaned = 0.00148308 Jy
! Total flux subtracted in 200 components = 0.00148308 Jy
! Clean residual min=-0.002505 max=0.002329 Jy/beam
! Clean residual mean=-0.000002 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.228892 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.228892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064625Jy  sigma=0.446557
! Fit after  self-cal, rms=0.064783Jy  sigma=0.446353
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.52394e-05 Jy
! Component: 100  -  total flux cleaned = 9.63851e-05 Jy
! Component: 150  -  total flux cleaned = 0.000141477 Jy
! Component: 200  -  total flux cleaned = 0.000181923 Jy
! Total flux subtracted in 200 components = 0.000181923 Jy
! Clean residual min=-0.002550 max=0.002304 Jy/beam
! Clean residual mean=-0.000002 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.229074 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 45 components and 0.229074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064776Jy  sigma=0.446290
! Fit after  self-cal, rms=0.064777Jy  sigma=0.446287
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064777Jy  sigma=0.446287
! Fit after  self-cal, rms=0.065001Jy  sigma=0.446121
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.203 mas, bmaj=6.701 mas, bpa=11.66 degrees
! Estimated noise=1.50789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000980706 Jy
! Component: 100  -  total flux cleaned = 0.00102998 Jy
! Component: 150  -  total flux cleaned = 0.00105011 Jy
! Component: 200  -  total flux cleaned = 0.0010988 Jy
! Total flux subtracted in 200 components = 0.0010988 Jy
! Clean residual min=-0.002477 max=0.002206 Jy/beam
! Clean residual mean=-0.000002 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.230173 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 0.230173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064984Jy  sigma=0.445953
! Fit after  self-cal, rms=0.064989Jy  sigma=0.445952
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.01339e-05 Jy
! Component: 100  -  total flux cleaned = 9.64138e-05 Jy
! Component: 150  -  total flux cleaned = 0.000128653 Jy
! Component: 200  -  total flux cleaned = 0.00012816 Jy
! Total flux subtracted in 200 components = 0.00012816 Jy
! Clean residual min=-0.002480 max=0.002197 Jy/beam
! Clean residual mean=-0.000002 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.230301 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.230301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064986Jy  sigma=0.445918
! Fit after  self-cal, rms=0.064986Jy  sigma=0.445917
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064986Jy  sigma=0.445917
! Fit after  self-cal, rms=0.065074Jy  sigma=0.445847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.661 mas, bmaj=9.459 mas, bpa=8.741 degrees
! Estimated noise=1.90289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000462555 Jy
! Component: 100  -  total flux cleaned = 0.000548177 Jy
! Component: 150  -  total flux cleaned = 0.000563224 Jy
! Component: 200  -  total flux cleaned = 0.000563409 Jy
! Total flux subtracted in 200 components = 0.000563409 Jy
! Clean residual min=-0.002847 max=0.002706 Jy/beam
! Clean residual mean=-0.000005 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.230865 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 61 components and 0.230865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065072Jy  sigma=0.445854
! Fit after  self-cal, rms=0.065072Jy  sigma=0.445853
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.05002e-05 Jy
! Component: 100  -  total flux cleaned = -1.05409e-05 Jy
! Component: 150  -  total flux cleaned = -1.45161e-05 Jy
! Component: 200  -  total flux cleaned = -1.85374e-05 Jy
! Total flux subtracted in 200 components = -1.85374e-05 Jy
! Clean residual min=-0.002838 max=0.002707 Jy/beam
! Clean residual mean=-0.000005 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.230846 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 62 components and 0.230846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065072Jy  sigma=0.445856
! Fit after  self-cal, rms=0.065072Jy  sigma=0.445856
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.197 mas, bmaj=6.701 mas, bpa=11.69 degrees
! Estimated noise=1.50884 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.197 x 6.701 at 11.69 degrees (North through East)
! Clean map  min=-0.0023956  max=0.23239 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.719 mas, bmaj=5.963 mas, bpa=11.54 degrees
! Estimated noise=2.08258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181159 Jy
! Component: 100  -  total flux cleaned = 0.220663 Jy
! Component: 150  -  total flux cleaned = 0.229139 Jy
! Component: 200  -  total flux cleaned = 0.229041 Jy
! Total flux subtracted in 200 components = 0.229041 Jy
! Clean residual min=-0.004156 max=0.004298 Jy/beam
! Clean residual mean=-0.000001 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.229041 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.229041 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.197 mas, bmaj=6.701 mas, bpa=11.69 degrees
! Estimated noise=1.50884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200767 Jy
! Component: 100  -  total flux cleaned = 0.00192775 Jy
! Component: 150  -  total flux cleaned = 0.00183826 Jy
! Component: 200  -  total flux cleaned = 0.0018652 Jy
! Total flux subtracted in 200 components = 0.0018652 Jy
! Clean residual min=-0.002441 max=0.002173 Jy/beam
! Clean residual mean=-0.000002 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.230906 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.230906 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.661 mas, bmaj=9.459 mas, bpa=8.741 degrees
! Estimated noise=1.90289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.43087e-06 Jy
! Component: 100  -  total flux cleaned = -5.39479e-06 Jy
! Component: 150  -  total flux cleaned = -3.69813e-05 Jy
! Component: 200  -  total flux cleaned = -6.40323e-05 Jy
! Total flux subtracted in 200 components = -6.40323e-05 Jy
! Clean residual min=-0.002859 max=0.002727 Jy/beam
! Clean residual mean=-0.000005 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.230842 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.99983e-06 Jy
! Component: 100  -  total flux cleaned = -2.30786e-05 Jy
! Component: 150  -  total flux cleaned = -2.97207e-05 Jy
! Component: 200  -  total flux cleaned = -3.62122e-05 Jy
! Total flux subtracted in 200 components = -3.62122e-05 Jy
! Clean residual min=-0.002843 max=0.002717 Jy/beam
! Clean residual mean=-0.000005 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.230806 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.230806 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.197 mas, bmaj=6.701 mas, bpa=11.69 degrees
! Estimated noise=1.50884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141155 Jy
! Component: 100  -  total flux cleaned = -9.81647e-05 Jy
! Component: 150  -  total flux cleaned = -7.92716e-05 Jy
! Component: 200  -  total flux cleaned = -8.03191e-05 Jy
! Total flux subtracted in 200 components = -8.03191e-05 Jy
! Clean residual min=-0.002439 max=0.002158 Jy/beam
! Clean residual mean=-0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.230726 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.230726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065081Jy  sigma=0.445903
! Fit after  self-cal, rms=0.065081Jy  sigma=0.445900
wmodel J1149+3559_S_map.mod
! Writing 35 model components to file: J1149+3559_S_map.mod
wobs   J1149+3559_S_uvs.fits
! Writing UV FITS file: J1149+3559_S_uvs.fits
wwins  J1149+3559_S_map.win
! wwins: Wrote 1 windows to J1149+3559_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000966627 Jy
! Component: 100  -  total flux cleaned = -0.0017065 Jy
! Component: 150  -  total flux cleaned = -0.00218215 Jy
! Component: 200  -  total flux cleaned = -0.00252953 Jy
! Component: 250  -  total flux cleaned = -0.00279512 Jy
! Component: 300  -  total flux cleaned = -0.00298649 Jy
! Component: 350  -  total flux cleaned = -0.00320179 Jy
! Component: 400  -  total flux cleaned = -0.00329092 Jy
! Component: 450  -  total flux cleaned = -0.00343624 Jy
! Component: 500  -  total flux cleaned = -0.00349228 Jy
! Component: 550  -  total flux cleaned = -0.00349265 Jy
! Component: 600  -  total flux cleaned = -0.00357315 Jy
! Component: 650  -  total flux cleaned = -0.00370327 Jy
! Component: 700  -  total flux cleaned = -0.00372918 Jy
! Component: 750  -  total flux cleaned = -0.00385431 Jy
! Component: 800  -  total flux cleaned = -0.00390367 Jy
! Component: 850  -  total flux cleaned = -0.00407131 Jy
! Component: 900  -  total flux cleaned = -0.00416512 Jy
! Component: 950  -  total flux cleaned = -0.00432591 Jy
! Component: 1000  -  total flux cleaned = -0.00446088 Jy
! Component: 1050  -  total flux cleaned = -0.00454908 Jy
! Component: 1100  -  total flux cleaned = -0.0046793 Jy
! Component: 1150  -  total flux cleaned = -0.00478587 Jy
! Component: 1200  -  total flux cleaned = -0.00495351 Jy
! Component: 1250  -  total flux cleaned = -0.0051387 Jy
! Component: 1300  -  total flux cleaned = -0.00517913 Jy
! Component: 1350  -  total flux cleaned = -0.00525938 Jy
! Component: 1400  -  total flux cleaned = -0.00539692 Jy
! Component: 1450  -  total flux cleaned = -0.00545493 Jy
! Component: 1500  -  total flux cleaned = -0.00560742 Jy
! Component: 1550  -  total flux cleaned = -0.00566368 Jy
! Component: 1600  -  total flux cleaned = -0.00571892 Jy
! Component: 1650  -  total flux cleaned = -0.00571909 Jy
! Component: 1700  -  total flux cleaned = -0.00573768 Jy
! Component: 1750  -  total flux cleaned = -0.00579134 Jy
! Component: 1800  -  total flux cleaned = -0.00579157 Jy
! Component: 1850  -  total flux cleaned = -0.00584353 Jy
! Component: 1900  -  total flux cleaned = -0.00584394 Jy
! Component: 1950  -  total flux cleaned = -0.00589486 Jy
! Component: 2000  -  total flux cleaned = -0.00591142 Jy
! Component: 2050  -  total flux cleaned = -0.00586204 Jy
! Component: 2100  -  total flux cleaned = -0.0059281 Jy
! Component: 2150  -  total flux cleaned = -0.00597705 Jy
! Component: 2200  -  total flux cleaned = -0.00599302 Jy
! Component: 2250  -  total flux cleaned = -0.00602485 Jy
! Component: 2300  -  total flux cleaned = -0.00605653 Jy
! Component: 2350  -  total flux cleaned = -0.00607209 Jy
! Component: 2400  -  total flux cleaned = -0.00614967 Jy
! Component: 2450  -  total flux cleaned = -0.00608812 Jy
! Component: 2500  -  total flux cleaned = -0.00617952 Jy
! Component: 2550  -  total flux cleaned = -0.00620957 Jy
! Component: 2600  -  total flux cleaned = -0.0062395 Jy
! Component: 2650  -  total flux cleaned = -0.00632848 Jy
! Component: 2700  -  total flux cleaned = -0.00631366 Jy
! Component: 2750  -  total flux cleaned = -0.00634283 Jy
! Component: 2800  -  total flux cleaned = -0.00640081 Jy
! Component: 2850  -  total flux cleaned = -0.0064295 Jy
! Component: 2900  -  total flux cleaned = -0.00645821 Jy
! Component: 2950  -  total flux cleaned = -0.0065851 Jy
! Component: 3000  -  total flux cleaned = -0.00665504 Jy
! Component: 3050  -  total flux cleaned = -0.00665486 Jy
! Component: 3100  -  total flux cleaned = -0.00669612 Jy
! Component: 3150  -  total flux cleaned = -0.00675089 Jy
! Component: 3200  -  total flux cleaned = -0.00675075 Jy
! Component: 3250  -  total flux cleaned = -0.00673714 Jy
! Component: 3300  -  total flux cleaned = -0.00675052 Jy
! Component: 3350  -  total flux cleaned = -0.00675055 Jy
! Component: 3400  -  total flux cleaned = -0.00675063 Jy
! Component: 3450  -  total flux cleaned = -0.00677695 Jy
! Component: 3500  -  total flux cleaned = -0.00673733 Jy
! Component: 3550  -  total flux cleaned = -0.00672428 Jy
! Component: 3600  -  total flux cleaned = -0.00671136 Jy
! Component: 3650  -  total flux cleaned = -0.0066984 Jy
! Component: 3700  -  total flux cleaned = -0.00673695 Jy
! Component: 3750  -  total flux cleaned = -0.00671143 Jy
! Component: 3800  -  total flux cleaned = -0.00672427 Jy
! Component: 3850  -  total flux cleaned = -0.00672435 Jy
! Component: 3900  -  total flux cleaned = -0.00676213 Jy
! Component: 3950  -  total flux cleaned = -0.00673726 Jy
! Component: 4000  -  total flux cleaned = -0.00673743 Jy
! Component: 4050  -  total flux cleaned = -0.00677464 Jy
! Total flux subtracted in 4096 components = -0.00676236 Jy
! Clean residual min=-0.000793 max=0.000823 Jy/beam
! Clean residual mean=0.000002 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.223963 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 319 components and 0.223963 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1149+3559_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.197 x 6.701 at 11.69 degrees (North through East)
! Clean map  min=-0.0015373  max=0.23217 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1149+3559_S_map.fits
wmodel /image_prod/ug002_uva//J1149+3559_S_map.mod
! Writing 319 model components to file: /image_prod/ug002_uva//J1149+3559_S_map.mod
wobs   /image_prod/ug002_uva//J1149+3559_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1149+3559_S_uvs.fits
wwins  /image_prod/ug002_uva//J1149+3559_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1149+3559_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.232173 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000201699 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.260623 0.260623 0.521246 1.04249 2.08499 4.16997 8.33994 16.6799 33.3598 66.7195
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.232 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1151.09 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1149+3559_S_dfm.log closed on Thu Mar  5 00:13:54 2020