! Started logfile: /image_prod/ug002_uva//J1147-0435_S_dfm.log on Thu Mar 5 00:12:40 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1147-0435_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1147-0435_S_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.993333 visibilities/baseline/integration-bin. ! Found source: J1147-0435 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 8046 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1147-0435_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.009860Jy sigma=8.266146 ! Fit after self-cal, rms=0.934768Jy sigma=7.627704 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.449 mas, bpa=-6.261 degrees ! Estimated noise=1.84054 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530149 Jy ! Component: 100 - total flux cleaned = 0.0672589 Jy ! Total flux subtracted in 100 components = 0.0672589 Jy ! Clean residual min=-0.006775 max=0.006067 Jy/beam ! Clean residual mean=0.000012 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.0672589 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0672589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090798Jy sigma=0.502166 ! Fit after self-cal, rms=0.090003Jy sigma=0.494843 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.771 mas, bpa=-6.483 degrees ! Estimated noise=1.01807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786259 Jy ! Component: 100 - total flux cleaned = 0.0112712 Jy ! Component: 150 - total flux cleaned = 0.013072 Jy ! Component: 200 - total flux cleaned = 0.013618 Jy ! Total flux subtracted in 200 components = 0.013618 Jy ! Clean residual min=-0.003369 max=0.004104 Jy/beam ! Clean residual mean=0.000002 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.0808769 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.0808769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089614Jy sigma=0.487119 ! Fit after self-cal, rms=0.089572Jy sigma=0.487020 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.326 x 8.771 at -6.483 degrees (North through East) ! Clean map min=-0.0031963 max=0.070938 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.10 KP 1.03 LA 0.88 ! MK 1.36 NL 1.21 OV 1.00 PT 1.19 ! SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 0.95 KP 0.94 LA 0.93 ! MK 0.97 NL 1.02 OV 0.98 PT 0.96 ! SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 0.97 KP 0.94 LA 0.97 ! MK 0.96 NL 0.93 OV 1.21 PT 0.96 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.089572Jy sigma=0.487020 ! Fit after self-cal, rms=0.093375Jy sigma=0.479110 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=8.786 mas, bpa=-5.97 degrees ! Estimated noise=1.01433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131566 Jy ! Component: 100 - total flux cleaned = -0.00139954 Jy ! Component: 150 - total flux cleaned = -0.00143486 Jy ! Component: 200 - total flux cleaned = -0.00148846 Jy ! Total flux subtracted in 200 components = -0.00148846 Jy ! Clean residual min=-0.003170 max=0.003172 Jy/beam ! Clean residual mean=0.000002 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.0793885 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0793885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093301Jy sigma=0.478987 ! Fit after self-cal, rms=0.093293Jy sigma=0.478713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093293Jy sigma=0.478713 ! Fit after self-cal, rms=0.104119Jy sigma=0.471159 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=8.785 mas, bpa=-5.968 degrees ! Estimated noise=1.00643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000828049 Jy ! Component: 100 - total flux cleaned = -0.000946728 Jy ! Component: 150 - total flux cleaned = -0.00096333 Jy ! Component: 200 - total flux cleaned = -0.000947873 Jy ! Total flux subtracted in 200 components = -0.000947873 Jy ! Clean residual min=-0.002270 max=0.002146 Jy/beam ! Clean residual mean=-0.000002 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0784406 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.0784406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104100Jy sigma=0.471138 ! Fit after self-cal, rms=0.104013Jy sigma=0.470913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123593 Jy ! Component: 100 - total flux cleaned = 0.000137337 Jy ! Component: 150 - total flux cleaned = 0.000150558 Jy ! Component: 200 - total flux cleaned = 0.000163384 Jy ! Total flux subtracted in 200 components = 0.000163384 Jy ! Clean residual min=-0.002229 max=0.002073 Jy/beam ! Clean residual mean=-0.000001 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.078604 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.078604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104009Jy sigma=0.470855 ! Fit after self-cal, rms=0.104006Jy sigma=0.470852 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104006Jy sigma=0.470852 ! Fit after self-cal, rms=0.103297Jy sigma=0.470798 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=8.792 mas, bpa=-5.867 degrees ! Estimated noise=1.00116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000654223 Jy ! Component: 100 - total flux cleaned = -0.000804035 Jy ! Component: 150 - total flux cleaned = -0.000803286 Jy ! Component: 200 - total flux cleaned = -0.000791915 Jy ! Total flux subtracted in 200 components = -0.000791915 Jy ! Clean residual min=-0.002214 max=0.002034 Jy/beam ! Clean residual mean=-0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0778121 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.0778121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103284Jy sigma=0.470798 ! Fit after self-cal, rms=0.103275Jy sigma=0.470792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.92757e-05 Jy ! Component: 100 - total flux cleaned = 4.05991e-05 Jy ! Component: 150 - total flux cleaned = 4.09303e-05 Jy ! Component: 200 - total flux cleaned = 5.07685e-05 Jy ! Total flux subtracted in 200 components = 5.07685e-05 Jy ! Clean residual min=-0.002216 max=0.002007 Jy/beam ! Clean residual mean=-0.000002 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0778628 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.0778628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103272Jy sigma=0.470766 ! Fit after self-cal, rms=0.103270Jy sigma=0.470763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103270Jy sigma=0.470763 ! Fit after self-cal, rms=0.102613Jy sigma=0.470736 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.867 mas, bmaj=15.11 mas, bpa=-6.735 degrees ! Estimated noise=1.22576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000816301 Jy ! Component: 100 - total flux cleaned = -0.000819242 Jy ! Component: 150 - total flux cleaned = -0.000811718 Jy ! Component: 200 - total flux cleaned = -0.000804982 Jy ! Total flux subtracted in 200 components = -0.000804982 Jy ! Clean residual min=-0.002195 max=0.002284 Jy/beam ! Clean residual mean=-0.000003 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0770579 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.0770579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102610Jy sigma=0.470818 ! Fit after self-cal, rms=0.102610Jy sigma=0.470773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.98122e-05 Jy ! Component: 100 - total flux cleaned = -6.85629e-06 Jy ! Component: 150 - total flux cleaned = 1.97828e-06 Jy ! Component: 200 - total flux cleaned = 8.53319e-06 Jy ! Total flux subtracted in 200 components = 8.53319e-06 Jy ! Clean residual min=-0.002208 max=0.002279 Jy/beam ! Clean residual mean=-0.000003 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0770664 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 54 components and 0.0770664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102613Jy sigma=0.470813 ! Fit after self-cal, rms=0.102614Jy sigma=0.470789 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=8.802 mas, bpa=-5.78 degrees ! Estimated noise=0.996509 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.41 x 8.802 at -5.78 degrees (North through East) ! Clean map min=-0.0021047 max=0.0697 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=7.42 mas, bpa=-5.391 degrees ! Estimated noise=1.84623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539307 Jy ! Component: 100 - total flux cleaned = 0.0687701 Jy ! Component: 150 - total flux cleaned = 0.0742016 Jy ! Component: 200 - total flux cleaned = 0.0748187 Jy ! Total flux subtracted in 200 components = 0.0748187 Jy ! Clean residual min=-0.004379 max=0.003386 Jy/beam ! Clean residual mean=0.000004 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.0748187 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0748187 Jy ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=8.802 mas, bpa=-5.78 degrees ! Estimated noise=0.996509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157169 Jy ! Component: 100 - total flux cleaned = 0.00180851 Jy ! Component: 150 - total flux cleaned = 0.00185061 Jy ! Component: 200 - total flux cleaned = 0.00185034 Jy ! Total flux subtracted in 200 components = 0.00185034 Jy ! Clean residual min=-0.002191 max=0.002256 Jy/beam ! Clean residual mean=-0.000001 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.076669 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.076669 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.867 mas, bmaj=15.11 mas, bpa=-6.735 degrees ! Estimated noise=1.22576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002799 Jy ! Component: 100 - total flux cleaned = 0.000280212 Jy ! Component: 150 - total flux cleaned = 0.000279947 Jy ! Component: 200 - total flux cleaned = 0.000279889 Jy ! Total flux subtracted in 200 components = 0.000279889 Jy ! Clean residual min=-0.002158 max=0.002309 Jy/beam ! Clean residual mean=-0.000003 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.0769489 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04654e-05 Jy ! Component: 100 - total flux cleaned = 1.03373e-05 Jy ! Component: 150 - total flux cleaned = 1.1177e-05 Jy ! Component: 200 - total flux cleaned = 1.0121e-05 Jy ! Total flux subtracted in 200 components = 1.0121e-05 Jy ! Clean residual min=-0.002162 max=0.002298 Jy/beam ! Clean residual mean=-0.000003 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.076959 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.076959 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=8.802 mas, bpa=-5.78 degrees ! Estimated noise=0.996509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.05332e-05 Jy ! Component: 100 - total flux cleaned = -0.000108457 Jy ! Component: 150 - total flux cleaned = -0.000135783 Jy ! Component: 200 - total flux cleaned = -0.000110669 Jy ! Total flux subtracted in 200 components = -0.000110669 Jy ! Clean residual min=-0.002109 max=0.002154 Jy/beam ! Clean residual mean=-0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0768484 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.0768484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102644Jy sigma=0.471067 ! Fit after self-cal, rms=0.102644Jy sigma=0.471015 wmodel J1147-0435_S_map.mod ! Writing 51 model components to file: J1147-0435_S_map.mod wobs J1147-0435_S_uvs.fits ! Writing UV FITS file: J1147-0435_S_uvs.fits wwins J1147-0435_S_map.win ! wwins: Wrote 1 windows to J1147-0435_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031887 Jy ! Component: 100 - total flux cleaned = 0.000319495 Jy ! Component: 150 - total flux cleaned = 1.77195e-05 Jy ! Component: 200 - total flux cleaned = -4.52429e-05 Jy ! Component: 250 - total flux cleaned = -4.4852e-05 Jy ! Component: 300 - total flux cleaned = -0.000223605 Jy ! Component: 350 - total flux cleaned = -0.000281139 Jy ! Component: 400 - total flux cleaned = -0.00039336 Jy ! Component: 450 - total flux cleaned = -0.000447455 Jy ! Component: 500 - total flux cleaned = -0.000447235 Jy ! Component: 550 - total flux cleaned = -0.000447166 Jy ! Component: 600 - total flux cleaned = -0.000521895 Jy ! Component: 650 - total flux cleaned = -0.000472734 Jy ! Component: 700 - total flux cleaned = -0.000639793 Jy ! Component: 750 - total flux cleaned = -0.000639748 Jy ! Component: 800 - total flux cleaned = -0.000708949 Jy ! Component: 850 - total flux cleaned = -0.000731142 Jy ! Component: 900 - total flux cleaned = -0.000819161 Jy ! Component: 950 - total flux cleaned = -0.000862521 Jy ! Component: 1000 - total flux cleaned = -0.000926742 Jy ! Component: 1050 - total flux cleaned = -0.00101019 Jy ! Component: 1100 - total flux cleaned = -0.00101009 Jy ! Component: 1150 - total flux cleaned = -0.00105087 Jy ! Component: 1200 - total flux cleaned = -0.00105113 Jy ! Component: 1250 - total flux cleaned = -0.0011098 Jy ! Component: 1300 - total flux cleaned = -0.0010904 Jy ! Component: 1350 - total flux cleaned = -0.00109078 Jy ! Component: 1400 - total flux cleaned = -0.00107243 Jy ! Component: 1450 - total flux cleaned = -0.00110955 Jy ! Component: 1500 - total flux cleaned = -0.00112767 Jy ! Component: 1550 - total flux cleaned = -0.00114509 Jy ! Component: 1600 - total flux cleaned = -0.00112721 Jy ! Component: 1650 - total flux cleaned = -0.00117978 Jy ! Component: 1700 - total flux cleaned = -0.00123152 Jy ! Component: 1750 - total flux cleaned = -0.0012144 Jy ! Component: 1800 - total flux cleaned = -0.00124835 Jy ! Component: 1850 - total flux cleaned = -0.00124853 Jy ! Component: 1900 - total flux cleaned = -0.0012819 Jy ! Component: 1950 - total flux cleaned = -0.00136364 Jy ! Component: 2000 - total flux cleaned = -0.00144442 Jy ! Component: 2050 - total flux cleaned = -0.00152414 Jy ! Component: 2100 - total flux cleaned = -0.00157137 Jy ! Component: 2150 - total flux cleaned = -0.00161839 Jy ! Component: 2200 - total flux cleaned = -0.00168049 Jy ! Component: 2250 - total flux cleaned = -0.00177283 Jy ! Component: 2300 - total flux cleaned = -0.00183393 Jy ! Component: 2350 - total flux cleaned = -0.00192437 Jy ! Component: 2400 - total flux cleaned = -0.00195426 Jy ! Component: 2450 - total flux cleaned = -0.00201365 Jy ! Component: 2500 - total flux cleaned = -0.00214592 Jy ! Component: 2550 - total flux cleaned = -0.00221851 Jy ! Component: 2600 - total flux cleaned = -0.00227598 Jy ! Component: 2650 - total flux cleaned = -0.00237585 Jy ! Component: 2700 - total flux cleaned = -0.00247481 Jy ! Component: 2750 - total flux cleaned = -0.00253079 Jy ! Component: 2800 - total flux cleaned = -0.00255851 Jy ! Component: 2850 - total flux cleaned = -0.00262757 Jy ! Component: 2900 - total flux cleaned = -0.00266866 Jy ! Component: 2950 - total flux cleaned = -0.0027502 Jy ! Component: 3000 - total flux cleaned = -0.00276368 Jy ! Component: 3050 - total flux cleaned = -0.00281744 Jy ! Component: 3100 - total flux cleaned = -0.00287063 Jy ! Component: 3150 - total flux cleaned = -0.00291027 Jy ! Component: 3200 - total flux cleaned = -0.00294967 Jy ! Component: 3250 - total flux cleaned = -0.00297575 Jy ! Component: 3300 - total flux cleaned = -0.00302755 Jy ! Component: 3350 - total flux cleaned = -0.00306621 Jy ! Component: 3400 - total flux cleaned = -0.0030919 Jy ! Component: 3450 - total flux cleaned = -0.00315557 Jy ! Component: 3500 - total flux cleaned = -0.00319349 Jy ! Component: 3550 - total flux cleaned = -0.00321862 Jy ! Component: 3600 - total flux cleaned = -0.00319357 Jy ! Component: 3650 - total flux cleaned = -0.00324336 Jy ! Component: 3700 - total flux cleaned = -0.00318133 Jy ! Component: 3750 - total flux cleaned = -0.00323068 Jy ! Component: 3800 - total flux cleaned = -0.00323061 Jy ! Component: 3850 - total flux cleaned = -0.00321845 Jy ! Component: 3900 - total flux cleaned = -0.00329141 Jy ! Component: 3950 - total flux cleaned = -0.00330337 Jy ! Component: 4000 - total flux cleaned = -0.00332738 Jy ! Component: 4050 - total flux cleaned = -0.00332735 Jy ! Total flux subtracted in 4096 components = -0.00332733 Jy ! Clean residual min=-0.000768 max=0.000671 Jy/beam ! Clean residual mean=-0.000002 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.073521 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 313 components and 0.073521 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1147-0435_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.41 x 8.802 at -5.78 degrees (North through East) ! Clean map min=-0.0020532 max=0.070068 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1147-0435_S_map.fits wmodel /image_prod/ug002_uva//J1147-0435_S_map.mod ! Writing 313 model components to file: /image_prod/ug002_uva//J1147-0435_S_map.mod wobs /image_prod/ug002_uva//J1147-0435_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1147-0435_S_uvs.fits wwins /image_prod/ug002_uva//J1147-0435_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1147-0435_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0700684 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208084 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.890919 0.890919 1.78184 3.56367 7.12735 14.2547 28.5094 57.0188 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.07 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 336.731 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1147-0435_S_dfm.log closed on Thu Mar 5 00:12:44 2020