! Started logfile: /image_prod/ug002_uva//J1146+3958_X_e_dfm.log on Thu Mar 5 00:12:00 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1146+3958_X_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1146+3958_X_e_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706173 visibilities/baseline/integration-bin. ! Found source: J1146+3958 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6864 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1146+3958_X_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.719698Jy sigma=8.068846 ! Fit after self-cal, rms=0.450891Jy sigma=2.044947 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7454 mas, bmaj=1.125 mas, bpa=-8.693 degrees ! Estimated noise=2.55896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04366 Jy ! Component: 100 - total flux cleaned = 1.2847 Jy ! Total flux subtracted in 100 components = 1.2847 Jy ! Clean residual min=-0.038258 max=0.090135 Jy/beam ! Clean residual mean=-0.000100 rms=0.008956 Jy/beam ! Combined flux in latest and established models = 1.2847 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.2847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.233763Jy sigma=1.045958 ! Fit after self-cal, rms=0.233636Jy sigma=1.045271 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10117 Jy ! Component: 100 - total flux cleaned = 0.158474 Jy ! Total flux subtracted in 100 components = 0.158474 Jy ! Clean residual min=-0.029644 max=0.034292 Jy/beam ! Clean residual mean=-0.000045 rms=0.006360 Jy/beam ! Combined flux in latest and established models = 1.44318 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 1.44318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.161538Jy sigma=0.737327 ! Fit after self-cal, rms=0.160324Jy sigma=0.730944 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9245 mas, bmaj=1.357 mas, bpa=-7.193 degrees ! Estimated noise=1.85973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0526086 Jy ! Component: 100 - total flux cleaned = 0.081088 Jy ! Component: 150 - total flux cleaned = 0.0989567 Jy ! Component: 200 - total flux cleaned = 0.110554 Jy ! Total flux subtracted in 200 components = 0.110554 Jy ! Clean residual min=-0.031365 max=0.036048 Jy/beam ! Clean residual mean=-0.000127 rms=0.006235 Jy/beam ! Combined flux in latest and established models = 1.55373 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 1.55373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139523Jy sigma=0.652420 ! Fit after self-cal, rms=0.139114Jy sigma=0.650203 ! Inverting map ! Added new window around map position (1.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367391 Jy ! Component: 100 - total flux cleaned = 0.0559165 Jy ! Component: 150 - total flux cleaned = 0.0681781 Jy ! Component: 200 - total flux cleaned = 0.0714917 Jy ! Total flux subtracted in 200 components = 0.0714917 Jy ! Clean residual min=-0.030626 max=0.030963 Jy/beam ! Clean residual mean=-0.000085 rms=0.005565 Jy/beam ! Combined flux in latest and established models = 1.62522 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 1.62522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128975Jy sigma=0.602344 ! Fit after self-cal, rms=0.127648Jy sigma=0.596241 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9245 x 1.357 at -7.193 degrees (North through East) ! Clean map min=-0.028559 max=1.3565 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 1.04 KP 1.08 ! LA 1.02 MK 1.02 NL 1.12 OV 1.03 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.99 KP 1.06 ! LA 1.02 MK 1.01 NL 1.12 OV 1.00 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 0.99 KP 1.05 ! LA 1.00 MK 1.02 NL 1.11 OV 1.01 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.03 KP 1.05 ! LA 1.04 MK 1.03 NL 1.08 OV 1.01 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.03 HN 0.98 KP 1.05 ! LA 0.99 MK 1.00 NL 1.11 OV 1.00 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.98 KP 1.05 ! LA 0.98 MK 0.99 NL 1.13 OV 1.01 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 0.96 KP 1.05 ! LA 0.98 MK 1.07 NL 1.12 OV 0.99 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.98 KP 1.07 ! LA 1.01 MK 0.99 NL 1.10 OV 1.01 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.03 KP 1.02 ! LA 1.01 MK 0.99 NL 1.08 OV 0.98 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 1.00 KP 1.05 ! LA 0.99 MK 1.02 NL 1.10 OV 1.01 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.97 KP 1.04 ! LA 1.01 MK 1.00 NL 1.06 OV 0.98 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.96 HN 1.03 KP 1.05 ! LA 0.99 MK 1.06 NL 1.11 OV 0.99 ! PT 0.91 SC 0.99 ! ! ! Fit before self-cal, rms=0.127648Jy sigma=0.596241 ! Fit after self-cal, rms=0.066116Jy sigma=0.309333 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9299 mas, bmaj=1.356 mas, bpa=-6.813 degrees ! Estimated noise=1.86878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00840676 Jy ! Component: 100 - total flux cleaned = -0.0103 Jy ! Component: 150 - total flux cleaned = -0.0112695 Jy ! Component: 200 - total flux cleaned = -0.0120773 Jy ! Total flux subtracted in 200 components = -0.0120773 Jy ! Clean residual min=-0.008428 max=0.007500 Jy/beam ! Clean residual mean=0.000014 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 1.61315 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 1.61315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062799Jy sigma=0.294663 ! Fit after self-cal, rms=0.062424Jy sigma=0.292956 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062424Jy sigma=0.292956 ! Fit after self-cal, rms=0.059359Jy sigma=0.277218 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9285 mas, bmaj=1.355 mas, bpa=-7.153 degrees ! Estimated noise=1.8677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020589 Jy ! Component: 100 - total flux cleaned = -0.00398595 Jy ! Component: 150 - total flux cleaned = -0.00530208 Jy ! Component: 200 - total flux cleaned = -0.00646764 Jy ! Total flux subtracted in 200 components = -0.00646764 Jy ! Clean residual min=-0.004915 max=0.004726 Jy/beam ! Clean residual mean=0.000001 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 1.60668 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 1.60668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058008Jy sigma=0.271302 ! Fit after self-cal, rms=0.057829Jy sigma=0.270459 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243913 Jy ! Component: 100 - total flux cleaned = 0.00212858 Jy ! Component: 150 - total flux cleaned = 0.0015964 Jy ! Component: 200 - total flux cleaned = 0.0010245 Jy ! Total flux subtracted in 200 components = 0.0010245 Jy ! Clean residual min=-0.004111 max=0.004044 Jy/beam ! Clean residual mean=0.000002 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 1.6077 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 1.6077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057135Jy sigma=0.267342 ! Fit after self-cal, rms=0.057086Jy sigma=0.267062 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057086Jy sigma=0.267062 ! Fit after self-cal, rms=0.056801Jy sigma=0.266173 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9281 mas, bmaj=1.353 mas, bpa=-7.168 degrees ! Estimated noise=1.86676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000527466 Jy ! Component: 100 - total flux cleaned = -0.00149618 Jy ! Component: 150 - total flux cleaned = -0.00230815 Jy ! Component: 200 - total flux cleaned = -0.00301714 Jy ! Total flux subtracted in 200 components = -0.00301714 Jy ! Clean residual min=-0.003786 max=0.003731 Jy/beam ! Clean residual mean=0.000002 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 1.60469 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 1.60469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056335Jy sigma=0.264179 ! Fit after self-cal, rms=0.056306Jy sigma=0.264008 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.2, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250205 Jy ! Component: 100 - total flux cleaned = 0.00295091 Jy ! Component: 150 - total flux cleaned = 0.00303286 Jy ! Component: 200 - total flux cleaned = 0.00303397 Jy ! Total flux subtracted in 200 components = 0.00303397 Jy ! Clean residual min=-0.003333 max=0.003278 Jy/beam ! Clean residual mean=0.000001 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 1.60772 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 110 components and 1.60772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056007Jy sigma=0.262689 ! Fit after self-cal, rms=0.055988Jy sigma=0.262613 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055988Jy sigma=0.262613 ! Fit after self-cal, rms=0.055870Jy sigma=0.262338 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=2.429 mas, bpa=33.31 degrees ! Estimated noise=2.56146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204399 Jy ! Component: 100 - total flux cleaned = -0.00282124 Jy ! Component: 150 - total flux cleaned = -0.0031701 Jy ! Component: 200 - total flux cleaned = -0.00339352 Jy ! Total flux subtracted in 200 components = -0.00339352 Jy ! Clean residual min=-0.003309 max=0.003384 Jy/beam ! Clean residual mean=0.000002 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 1.60433 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 1.60433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055740Jy sigma=0.261953 ! Fit after self-cal, rms=0.055729Jy sigma=0.261842 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000204329 Jy ! Component: 100 - total flux cleaned = -0.000262559 Jy ! Component: 150 - total flux cleaned = -0.000219503 Jy ! Component: 200 - total flux cleaned = -0.000183207 Jy ! Total flux subtracted in 200 components = -0.000183207 Jy ! Clean residual min=-0.003218 max=0.003310 Jy/beam ! Clean residual mean=0.000001 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 1.60414 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 128 components and 1.60414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055685Jy sigma=0.261745 ! Fit after self-cal, rms=0.055672Jy sigma=0.261674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.928 mas, bmaj=1.352 mas, bpa=-7.19 degrees ! Estimated noise=1.86595 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.928 x 1.352 at -7.19 degrees (North through East) ! Clean map min=-0.003914 max=1.3618 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055672Jy sigma=0.261674 ! Fit after self-cal, rms=0.052649Jy sigma=0.240364 ! Inverting map and beam ! Estimated beam: bmin=0.9282 mas, bmaj=1.352 mas, bpa=-7.197 degrees ! Estimated noise=1.86585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000683921 Jy ! Component: 100 - total flux cleaned = -0.00118676 Jy ! Component: 150 - total flux cleaned = -0.00150984 Jy ! Component: 200 - total flux cleaned = -0.00174512 Jy ! Total flux subtracted in 200 components = -0.00174512 Jy ! Clean residual min=-0.002957 max=0.003093 Jy/beam ! Clean residual mean=0.000002 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 1.6024 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 136 components and 1.6024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052503Jy sigma=0.239555 ! Fit after self-cal, rms=0.052491Jy sigma=0.239525 ! Inverting map ! Added new window around map position (-10, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177983 Jy ! Component: 100 - total flux cleaned = 0.00152622 Jy ! Component: 150 - total flux cleaned = 0.0013531 Jy ! Component: 200 - total flux cleaned = 0.00129955 Jy ! Total flux subtracted in 200 components = 0.00129955 Jy ! Clean residual min=-0.002761 max=0.002817 Jy/beam ! Clean residual mean=0.000002 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 1.6037 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 145 components and 1.6037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052329Jy sigma=0.238587 ! Fit after self-cal, rms=0.052313Jy sigma=0.238546 ! Inverting map ! Added new window around map position (0.4, -15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249828 Jy ! Component: 100 - total flux cleaned = 0.00310338 Jy ! Component: 150 - total flux cleaned = 0.0032665 Jy ! Component: 200 - total flux cleaned = 0.00341778 Jy ! Total flux subtracted in 200 components = 0.00341778 Jy ! Clean residual min=-0.002573 max=0.002660 Jy/beam ! Clean residual mean=0.000001 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 1.60712 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 159 components and 1.60712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052155Jy sigma=0.237796 ! Fit after self-cal, rms=0.052142Jy sigma=0.237753 ! Inverting map ! Added new window around map position (1.4, -36.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137839 Jy ! Component: 100 - total flux cleaned = 0.0013818 Jy ! Component: 150 - total flux cleaned = 0.00152669 Jy ! Component: 200 - total flux cleaned = 0.00166791 Jy ! Total flux subtracted in 200 components = 0.00166791 Jy ! Clean residual min=-0.002507 max=0.002475 Jy/beam ! Clean residual mean=0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 1.60878 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 172 components and 1.60878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052007Jy sigma=0.237074 ! Fit after self-cal, rms=0.051999Jy sigma=0.237041 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051999Jy sigma=0.237041 ! Fit after self-cal, rms=0.051941Jy sigma=0.236879 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7483 mas, bmaj=1.122 mas, bpa=-8.747 degrees ! Estimated noise=2.56154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04418 Jy ! Component: 100 - total flux cleaned = 1.29057 Jy ! Component: 150 - total flux cleaned = 1.39561 Jy ! Component: 200 - total flux cleaned = 1.4541 Jy ! Total flux subtracted in 200 components = 1.4541 Jy ! Clean residual min=-0.012208 max=0.030840 Jy/beam ! Clean residual mean=-0.000039 rms=0.002954 Jy/beam ! Combined flux in latest and established models = 1.4541 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.4541 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9281 mas, bmaj=1.352 mas, bpa=-7.231 degrees ! Estimated noise=1.86575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0521798 Jy ! Component: 100 - total flux cleaned = 0.0814019 Jy ! Component: 150 - total flux cleaned = 0.10038 Jy ! Component: 200 - total flux cleaned = 0.113246 Jy ! Total flux subtracted in 200 components = 0.113246 Jy ! Clean residual min=-0.004018 max=0.007538 Jy/beam ! Clean residual mean=-0.000022 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 1.56734 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 45 components and 1.56734 Jy ! Inverting map ! Added new window around map position (0, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903689 Jy ! Component: 100 - total flux cleaned = 0.015505 Jy ! Component: 150 - total flux cleaned = 0.020549 Jy ! Component: 200 - total flux cleaned = 0.0248181 Jy ! Total flux subtracted in 200 components = 0.0248181 Jy ! Clean residual min=-0.003200 max=0.004174 Jy/beam ! Clean residual mean=-0.000006 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 1.59216 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 67 components and 1.59216 Jy ! Inverting map ! Added new window around map position (-19.4, -24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041432 Jy ! Component: 100 - total flux cleaned = 0.00746896 Jy ! Component: 150 - total flux cleaned = 0.0104233 Jy ! Component: 200 - total flux cleaned = 0.0120269 Jy ! Total flux subtracted in 200 components = 0.0120269 Jy ! Clean residual min=-0.002977 max=0.003102 Jy/beam ! Clean residual mean=-0.000003 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 1.60419 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 79 components and 1.60419 Jy ! Inverting map ! Added new window around map position (8.6, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262971 Jy ! Component: 100 - total flux cleaned = 0.00385155 Jy ! Component: 150 - total flux cleaned = 0.00490179 Jy ! Component: 200 - total flux cleaned = 0.00604373 Jy ! Total flux subtracted in 200 components = 0.00604373 Jy ! Clean residual min=-0.002857 max=0.002830 Jy/beam ! Clean residual mean=-0.000003 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 1.61023 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 1.61023 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=2.43 mas, bpa=33.43 degrees ! Estimated noise=2.5609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809899 Jy ! Component: 100 - total flux cleaned = 0.00122979 Jy ! Component: 150 - total flux cleaned = 0.00154439 Jy ! Component: 200 - total flux cleaned = 0.00171498 Jy ! Total flux subtracted in 200 components = 0.00171498 Jy ! Clean residual min=-0.002859 max=0.002794 Jy/beam ! Clean residual mean=-0.000005 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 1.61195 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103593 Jy ! Component: 100 - total flux cleaned = 0.000244513 Jy ! Component: 150 - total flux cleaned = 0.000200461 Jy ! Component: 200 - total flux cleaned = 0.000325094 Jy ! Total flux subtracted in 200 components = 0.000325094 Jy ! Clean residual min=-0.002707 max=0.002692 Jy/beam ! Clean residual mean=-0.000005 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 1.61227 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 125 components and 1.61227 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9281 mas, bmaj=1.352 mas, bpa=-7.231 degrees ! Estimated noise=1.86575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000786457 Jy ! Component: 100 - total flux cleaned = 0.00126721 Jy ! Component: 150 - total flux cleaned = 0.0013934 Jy ! Component: 200 - total flux cleaned = 0.00133155 Jy ! Total flux subtracted in 200 components = 0.00133155 Jy ! Clean residual min=-0.002617 max=0.002468 Jy/beam ! Clean residual mean=-0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 1.6136 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 145 components and 1.6136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051809Jy sigma=0.236467 ! Fit after self-cal, rms=0.051758Jy sigma=0.236137 wmodel J1146+3958_X_e_map.mod ! Writing 145 model components to file: J1146+3958_X_e_map.mod wobs J1146+3958_X_e_uvs.fits ! Writing UV FITS file: J1146+3958_X_e_uvs.fits wwins J1146+3958_X_e_map.win ! wwins: Wrote 10 windows to J1146+3958_X_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00038585 Jy ! Component: 100 - total flux cleaned = -5.38403e-05 Jy ! Component: 150 - total flux cleaned = 0.000264011 Jy ! Component: 200 - total flux cleaned = 0.000570534 Jy ! Component: 250 - total flux cleaned = 0.000868351 Jy ! Component: 300 - total flux cleaned = 0.0012309 Jy ! Component: 350 - total flux cleaned = 0.00154849 Jy ! Component: 400 - total flux cleaned = 0.00182341 Jy ! Component: 450 - total flux cleaned = 0.00202466 Jy ! Component: 500 - total flux cleaned = 0.0021236 Jy ! Component: 550 - total flux cleaned = 0.00225324 Jy ! Component: 600 - total flux cleaned = 0.00241261 Jy ! Component: 650 - total flux cleaned = 0.00256903 Jy ! Component: 700 - total flux cleaned = 0.00272265 Jy ! Component: 750 - total flux cleaned = 0.00281353 Jy ! Component: 800 - total flux cleaned = 0.00284362 Jy ! Component: 850 - total flux cleaned = 0.00299116 Jy ! Component: 900 - total flux cleaned = 0.00304904 Jy ! Component: 950 - total flux cleaned = 0.00319283 Jy ! Component: 1000 - total flux cleaned = 0.00319238 Jy ! Component: 1050 - total flux cleaned = 0.00324869 Jy ! Component: 1100 - total flux cleaned = 0.00324889 Jy ! Component: 1150 - total flux cleaned = 0.0033038 Jy ! Component: 1200 - total flux cleaned = 0.0032501 Jy ! Component: 1250 - total flux cleaned = 0.00330345 Jy ! Component: 1300 - total flux cleaned = 0.00332982 Jy ! Component: 1350 - total flux cleaned = 0.00335628 Jy ! Component: 1400 - total flux cleaned = 0.00340769 Jy ! Component: 1450 - total flux cleaned = 0.00335721 Jy ! Component: 1500 - total flux cleaned = 0.00340779 Jy ! Component: 1550 - total flux cleaned = 0.00343276 Jy ! Component: 1600 - total flux cleaned = 0.00348193 Jy ! Component: 1650 - total flux cleaned = 0.00343328 Jy ! Component: 1700 - total flux cleaned = 0.00357782 Jy ! Component: 1750 - total flux cleaned = 0.0035059 Jy ! Component: 1800 - total flux cleaned = 0.00352994 Jy ! Component: 1850 - total flux cleaned = 0.00357661 Jy ! Component: 1900 - total flux cleaned = 0.00355347 Jy ! Component: 1950 - total flux cleaned = 0.00359948 Jy ! Component: 2000 - total flux cleaned = 0.0035992 Jy ! Component: 2050 - total flux cleaned = 0.00359915 Jy ! Component: 2100 - total flux cleaned = 0.00359927 Jy ! Component: 2150 - total flux cleaned = 0.00355501 Jy ! Component: 2200 - total flux cleaned = 0.00351087 Jy ! Component: 2250 - total flux cleaned = 0.00346719 Jy ! Component: 2300 - total flux cleaned = 0.00353146 Jy ! Component: 2350 - total flux cleaned = 0.00344619 Jy ! Component: 2400 - total flux cleaned = 0.00327712 Jy ! Component: 2450 - total flux cleaned = 0.00338217 Jy ! Component: 2500 - total flux cleaned = 0.00329881 Jy ! Component: 2550 - total flux cleaned = 0.00329869 Jy ! Component: 2600 - total flux cleaned = 0.00325762 Jy ! Component: 2650 - total flux cleaned = 0.00325763 Jy ! Component: 2700 - total flux cleaned = 0.00331804 Jy ! Component: 2750 - total flux cleaned = 0.00327844 Jy ! Component: 2800 - total flux cleaned = 0.0032984 Jy ! Component: 2850 - total flux cleaned = 0.00327862 Jy ! Component: 2900 - total flux cleaned = 0.00327851 Jy ! Component: 2950 - total flux cleaned = 0.00314303 Jy ! Component: 3000 - total flux cleaned = 0.00310469 Jy ! Component: 3050 - total flux cleaned = 0.00304788 Jy ! Component: 3100 - total flux cleaned = 0.00314245 Jy ! Component: 3150 - total flux cleaned = 0.00312383 Jy ! Component: 3200 - total flux cleaned = 0.00306787 Jy ! Component: 3250 - total flux cleaned = 0.00306806 Jy ! Component: 3300 - total flux cleaned = 0.00299463 Jy ! Component: 3350 - total flux cleaned = 0.00303123 Jy ! Component: 3400 - total flux cleaned = 0.0028864 Jy ! Component: 3450 - total flux cleaned = 0.00285069 Jy ! Component: 3500 - total flux cleaned = 0.00288655 Jy ! Component: 3550 - total flux cleaned = 0.00283339 Jy ! Component: 3600 - total flux cleaned = 0.00274562 Jy ! Component: 3650 - total flux cleaned = 0.00271052 Jy ! Component: 3700 - total flux cleaned = 0.0026411 Jy ! Component: 3750 - total flux cleaned = 0.00260686 Jy ! Component: 3800 - total flux cleaned = 0.00257252 Jy ! Component: 3850 - total flux cleaned = 0.00247031 Jy ! Component: 3900 - total flux cleaned = 0.00241991 Jy ! Component: 3950 - total flux cleaned = 0.00241987 Jy ! Component: 4000 - total flux cleaned = 0.00228628 Jy ! Component: 4050 - total flux cleaned = 0.00230298 Jy ! Total flux subtracted in 4096 components = 0.00228651 Jy ! Clean residual min=-0.000924 max=0.001236 Jy/beam ! Clean residual mean=0.000000 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 1.61589 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 456 components and 1.61589 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1146+3958_X_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9281 x 1.352 at -7.231 degrees (North through East) ! Clean map min=-0.0019862 max=1.365 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1146+3958_X_e_map.fits wmodel /image_prod/ug002_uva//J1146+3958_X_e_map.mod ! Writing 456 model components to file: /image_prod/ug002_uva//J1146+3958_X_e_map.mod wobs /image_prod/ug002_uva//J1146+3958_X_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1146+3958_X_e_uvs.fits wwins /image_prod/ug002_uva//J1146+3958_X_e_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1146+3958_X_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.36502 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000274452 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0603181 0.0603181 0.120636 0.241272 0.482545 0.96509 1.93018 3.86036 7.72072 15.4414 30.8829 61.7657 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.365 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4973.63 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1146+3958_X_e_dfm.log closed on Thu Mar 5 00:12:04 2020