! Started logfile: /image_prod/ug002_uva//J1143+1843_S_dfm.log on Thu Mar 5 00:09:40 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1143+1843_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1143+1843_S_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.925926 visibilities/baseline/integration-bin. ! Found source: J1143+1843 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 7500 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1143+1843_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003417Jy sigma=8.688887 ! Fit after self-cal, rms=0.961473Jy sigma=8.333944 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=7.223 mas, bpa=1.409 degrees ! Estimated noise=1.43192 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311599 Jy ! Component: 100 - total flux cleaned = 0.0379763 Jy ! Total flux subtracted in 100 components = 0.0379763 Jy ! Clean residual min=-0.002798 max=0.002992 Jy/beam ! Clean residual mean=-0.000003 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0379763 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0379763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063165Jy sigma=0.468759 ! Fit after self-cal, rms=0.061446Jy sigma=0.452156 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=7.837 mas, bpa=1.608 degrees ! Estimated noise=0.980463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038873 Jy ! Component: 100 - total flux cleaned = 0.0054325 Jy ! Component: 150 - total flux cleaned = 0.0060235 Jy ! Component: 200 - total flux cleaned = 0.00610057 Jy ! Total flux subtracted in 200 components = 0.00610057 Jy ! Clean residual min=-0.002434 max=0.002032 Jy/beam ! Clean residual mean=-0.000000 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0440769 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.0440769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061161Jy sigma=0.450414 ! Fit after self-cal, rms=0.061168Jy sigma=0.450362 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.432 x 7.837 at 1.608 degrees (North through East) ! Clean map min=-0.0024104 max=0.042659 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.03 KP 0.99 ! LA 1.05 MK 0.90 NL 1.00 OV 1.02 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.09 KP 1.07 ! LA 1.02 MK 0.94 NL 1.00 OV 0.92 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 1.02 KP 1.06 ! LA 1.00 MK 0.92 NL 0.94 OV 1.03 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.061168Jy sigma=0.450362 ! Fit after self-cal, rms=0.060348Jy sigma=0.449810 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=7.806 mas, bpa=1.479 degrees ! Estimated noise=0.982784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105845 Jy ! Component: 100 - total flux cleaned = 0.00145831 Jy ! Component: 150 - total flux cleaned = 0.00144015 Jy ! Component: 200 - total flux cleaned = 0.00140828 Jy ! Total flux subtracted in 200 components = 0.00140828 Jy ! Clean residual min=-0.002216 max=0.002063 Jy/beam ! Clean residual mean=-0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0454851 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.0454851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060319Jy sigma=0.449684 ! Fit after self-cal, rms=0.060316Jy sigma=0.449533 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060316Jy sigma=0.449533 ! Fit after self-cal, rms=0.058214Jy sigma=0.447353 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=7.796 mas, bpa=1.272 degrees ! Estimated noise=0.981842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219734 Jy ! Component: 100 - total flux cleaned = 0.00024454 Jy ! Component: 150 - total flux cleaned = 0.000244946 Jy ! Component: 200 - total flux cleaned = 0.000254717 Jy ! Total flux subtracted in 200 components = 0.000254717 Jy ! Clean residual min=-0.001692 max=0.001533 Jy/beam ! Clean residual mean=-0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0457399 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0457399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058208Jy sigma=0.447311 ! Fit after self-cal, rms=0.058201Jy sigma=0.447085 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.13685e-05 Jy ! Component: 100 - total flux cleaned = -1.16263e-05 Jy ! Component: 150 - total flux cleaned = 1.64021e-05 Jy ! Component: 200 - total flux cleaned = 4.25583e-05 Jy ! Total flux subtracted in 200 components = 4.25583e-05 Jy ! Clean residual min=-0.001658 max=0.001559 Jy/beam ! Clean residual mean=-0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0457824 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.0457824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058197Jy sigma=0.447059 ! Fit after self-cal, rms=0.058197Jy sigma=0.447045 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058197Jy sigma=0.447045 ! Fit after self-cal, rms=0.058072Jy sigma=0.446948 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=7.791 mas, bpa=1.184 degrees ! Estimated noise=0.980194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.91586e-06 Jy ! Component: 100 - total flux cleaned = 3.60297e-05 Jy ! Component: 150 - total flux cleaned = 6.2995e-05 Jy ! Component: 200 - total flux cleaned = 7.983e-05 Jy ! Total flux subtracted in 200 components = 7.983e-05 Jy ! Clean residual min=-0.001586 max=0.001523 Jy/beam ! Clean residual mean=-0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0458622 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0458622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058068Jy sigma=0.446926 ! Fit after self-cal, rms=0.058067Jy sigma=0.446911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.93543e-07 Jy ! Component: 100 - total flux cleaned = 2.43037e-05 Jy ! Component: 150 - total flux cleaned = 3.95694e-05 Jy ! Component: 200 - total flux cleaned = 5.4026e-05 Jy ! Total flux subtracted in 200 components = 5.4026e-05 Jy ! Clean residual min=-0.001567 max=0.001543 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0459163 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.0459163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058064Jy sigma=0.446894 ! Fit after self-cal, rms=0.058063Jy sigma=0.446891 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058063Jy sigma=0.446891 ! Fit after self-cal, rms=0.058025Jy sigma=0.446887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.09 mas, bmaj=10.15 mas, bpa=-3.632 degrees ! Estimated noise=1.17833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200208 Jy ! Component: 100 - total flux cleaned = 0.000221496 Jy ! Component: 150 - total flux cleaned = 0.000249647 Jy ! Component: 200 - total flux cleaned = 0.000269326 Jy ! Total flux subtracted in 200 components = 0.000269326 Jy ! Clean residual min=-0.001835 max=0.001787 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0461856 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.0461856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058025Jy sigma=0.446894 ! Fit after self-cal, rms=0.058023Jy sigma=0.446889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68628e-05 Jy ! Component: 100 - total flux cleaned = 5.84575e-05 Jy ! Component: 150 - total flux cleaned = 7.23528e-05 Jy ! Component: 200 - total flux cleaned = 8.03551e-05 Jy ! Total flux subtracted in 200 components = 8.03551e-05 Jy ! Clean residual min=-0.001837 max=0.001783 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.046266 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.046266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058023Jy sigma=0.446900 ! Fit after self-cal, rms=0.058022Jy sigma=0.446896 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.793 mas, bpa=1.065 degrees ! Estimated noise=0.979694 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.367 x 7.793 at 1.065 degrees (North through East) ! Clean map min=-0.0015708 max=0.042521 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.187 mas, bpa=0.776 degrees ! Estimated noise=1.4135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322188 Jy ! Component: 100 - total flux cleaned = 0.0393348 Jy ! Component: 150 - total flux cleaned = 0.0420065 Jy ! Component: 200 - total flux cleaned = 0.0433758 Jy ! Total flux subtracted in 200 components = 0.0433758 Jy ! Clean residual min=-0.002646 max=0.002467 Jy/beam ! Clean residual mean=-0.000003 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0433757 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0433757 Jy ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.793 mas, bpa=1.065 degrees ! Estimated noise=0.979694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193385 Jy ! Component: 100 - total flux cleaned = 0.00266285 Jy ! Component: 150 - total flux cleaned = 0.00271535 Jy ! Component: 200 - total flux cleaned = 0.00271671 Jy ! Total flux subtracted in 200 components = 0.00271671 Jy ! Clean residual min=-0.001565 max=0.001544 Jy/beam ! Clean residual mean=-0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0460924 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.0460924 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.09 mas, bmaj=10.15 mas, bpa=-3.632 degrees ! Estimated noise=1.17833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154789 Jy ! Component: 100 - total flux cleaned = 0.000170915 Jy ! Component: 150 - total flux cleaned = 0.000189016 Jy ! Component: 200 - total flux cleaned = 0.000198354 Jy ! Total flux subtracted in 200 components = 0.000198354 Jy ! Clean residual min=-0.001846 max=0.001769 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0462908 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.12954e-06 Jy ! Component: 100 - total flux cleaned = 8.28961e-06 Jy ! Component: 150 - total flux cleaned = 8.24069e-06 Jy ! Component: 200 - total flux cleaned = 1.19691e-05 Jy ! Total flux subtracted in 200 components = 1.19691e-05 Jy ! Clean residual min=-0.001844 max=0.001770 Jy/beam ! Clean residual mean=-0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0463028 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.0463028 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.793 mas, bpa=1.065 degrees ! Estimated noise=0.979694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112074 Jy ! Component: 100 - total flux cleaned = -0.000209355 Jy ! Component: 150 - total flux cleaned = -0.000266457 Jy ! Component: 200 - total flux cleaned = -0.000286151 Jy ! Total flux subtracted in 200 components = -0.000286151 Jy ! Clean residual min=-0.001594 max=0.001548 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0460166 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.0460166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058024Jy sigma=0.446920 ! Fit after self-cal, rms=0.058026Jy sigma=0.446914 wmodel J1143+1843_S_map.mod ! Writing 43 model components to file: J1143+1843_S_map.mod wobs J1143+1843_S_uvs.fits ! Writing UV FITS file: J1143+1843_S_uvs.fits wwins J1143+1843_S_map.win ! wwins: Wrote 1 windows to J1143+1843_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032446 Jy ! Component: 100 - total flux cleaned = -0.000626743 Jy ! Component: 150 - total flux cleaned = -0.00070593 Jy ! Component: 200 - total flux cleaned = -0.00070572 Jy ! Component: 250 - total flux cleaned = -0.00070572 Jy ! Component: 300 - total flux cleaned = -0.000753399 Jy ! Component: 350 - total flux cleaned = -0.000799831 Jy ! Component: 400 - total flux cleaned = -0.000845489 Jy ! Component: 450 - total flux cleaned = -0.000955821 Jy ! Component: 500 - total flux cleaned = -0.00097695 Jy ! Component: 550 - total flux cleaned = -0.00106176 Jy ! Component: 600 - total flux cleaned = -0.00112394 Jy ! Component: 650 - total flux cleaned = -0.00122569 Jy ! Component: 700 - total flux cleaned = -0.00122527 Jy ! Component: 750 - total flux cleaned = -0.0013237 Jy ! Component: 800 - total flux cleaned = -0.00138178 Jy ! Component: 850 - total flux cleaned = -0.00138217 Jy ! Component: 900 - total flux cleaned = -0.00149512 Jy ! Component: 950 - total flux cleaned = -0.00153196 Jy ! Component: 1000 - total flux cleaned = -0.00151395 Jy ! Component: 1050 - total flux cleaned = -0.00151375 Jy ! Component: 1100 - total flux cleaned = -0.00151416 Jy ! Component: 1150 - total flux cleaned = -0.00158392 Jy ! Component: 1200 - total flux cleaned = -0.00156658 Jy ! Component: 1250 - total flux cleaned = -0.00163434 Jy ! Component: 1300 - total flux cleaned = -0.00156752 Jy ! Component: 1350 - total flux cleaned = -0.00156763 Jy ! Component: 1400 - total flux cleaned = -0.00153523 Jy ! Component: 1450 - total flux cleaned = -0.00148676 Jy ! Component: 1500 - total flux cleaned = -0.00147097 Jy ! Component: 1550 - total flux cleaned = -0.00139239 Jy ! Component: 1600 - total flux cleaned = -0.00133033 Jy ! Component: 1650 - total flux cleaned = -0.00129969 Jy ! Component: 1700 - total flux cleaned = -0.0012846 Jy ! Component: 1750 - total flux cleaned = -0.00129944 Jy ! Component: 1800 - total flux cleaned = -0.00121042 Jy ! Component: 1850 - total flux cleaned = -0.00118099 Jy ! Component: 1900 - total flux cleaned = -0.00109392 Jy ! Component: 1950 - total flux cleaned = -0.00103636 Jy ! Component: 2000 - total flux cleaned = -0.00096537 Jy ! Component: 2050 - total flux cleaned = -0.000895095 Jy ! Component: 2100 - total flux cleaned = -0.000797786 Jy ! Component: 2150 - total flux cleaned = -0.000742888 Jy ! Component: 2200 - total flux cleaned = -0.00068849 Jy ! Component: 2250 - total flux cleaned = -0.0006079 Jy ! Component: 2300 - total flux cleaned = -0.000567749 Jy ! Component: 2350 - total flux cleaned = -0.000527787 Jy ! Component: 2400 - total flux cleaned = -0.000449083 Jy ! Component: 2450 - total flux cleaned = -0.000397116 Jy ! Component: 2500 - total flux cleaned = -0.000319833 Jy ! Component: 2550 - total flux cleaned = -0.000230628 Jy ! Component: 2600 - total flux cleaned = -0.000218119 Jy ! Component: 2650 - total flux cleaned = -0.000193243 Jy ! Component: 2700 - total flux cleaned = -0.000118918 Jy ! Component: 2750 - total flux cleaned = -9.44922e-05 Jy ! Component: 2800 - total flux cleaned = -9.44782e-05 Jy ! Component: 2850 - total flux cleaned = -7.02763e-05 Jy ! Component: 2900 - total flux cleaned = -1.04655e-05 Jy ! Component: 2950 - total flux cleaned = 3.67942e-05 Jy ! Component: 3000 - total flux cleaned = 3.67124e-05 Jy ! Component: 3050 - total flux cleaned = 7.15798e-05 Jy ! Component: 3100 - total flux cleaned = 6.0103e-05 Jy ! Component: 3150 - total flux cleaned = 0.000128887 Jy ! Component: 3200 - total flux cleaned = 0.000117465 Jy ! Component: 3250 - total flux cleaned = 0.000140154 Jy ! Component: 3300 - total flux cleaned = 0.000185047 Jy ! Component: 3350 - total flux cleaned = 0.000251632 Jy ! Component: 3400 - total flux cleaned = 0.000262651 Jy ! Component: 3450 - total flux cleaned = 0.00029535 Jy ! Component: 3500 - total flux cleaned = 0.000327841 Jy ! Component: 3550 - total flux cleaned = 0.000349376 Jy ! Component: 3600 - total flux cleaned = 0.000381382 Jy ! Component: 3650 - total flux cleaned = 0.00042384 Jy ! Component: 3700 - total flux cleaned = 0.000465933 Jy ! Component: 3750 - total flux cleaned = 0.000507697 Jy ! Component: 3800 - total flux cleaned = 0.000518154 Jy ! Component: 3850 - total flux cleaned = 0.000549267 Jy ! Component: 3900 - total flux cleaned = 0.000590405 Jy ! Component: 3950 - total flux cleaned = 0.000600648 Jy ! Component: 4000 - total flux cleaned = 0.000671614 Jy ! Component: 4050 - total flux cleaned = 0.000711858 Jy ! Total flux subtracted in 4096 components = 0.000711856 Jy ! Clean residual min=-0.000669 max=0.000554 Jy/beam ! Clean residual mean=-0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.0467285 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 339 components and 0.0467285 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1143+1843_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.367 x 7.793 at 1.065 degrees (North through East) ! Clean map min=-0.0012093 max=0.042432 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1143+1843_S_map.fits wmodel /image_prod/ug002_uva//J1143+1843_S_map.mod ! Writing 339 model components to file: /image_prod/ug002_uva//J1143+1843_S_map.mod wobs /image_prod/ug002_uva//J1143+1843_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1143+1843_S_uvs.fits wwins /image_prod/ug002_uva//J1143+1843_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1143+1843_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0424319 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180676 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27741 1.27741 2.55482 5.10964 10.2193 20.4386 40.8771 81.7543 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.042 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 234.85 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1143+1843_S_dfm.log closed on Thu Mar 5 00:09:44 2020