! Started logfile: /image_prod/ug002_uva//J1143+1834_S_dfm.log on Thu Mar  5 00:09:29 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1143+1834_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1143+1834_S_uva.fits
! AN table 1: 75 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.918519 visibilities/baseline/integration-bin.
! Found source: J1143+1834
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9300 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1143+1834_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.044415Jy  sigma=8.805349
! Fit after  self-cal, rms=0.803499Jy  sigma=6.742341
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.92 mas, bmaj=6.552 mas, bpa=-6.266 degrees
! Estimated noise=1.3532 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.164192 Jy
! Component: 100  -  total flux cleaned = 0.244279 Jy
! Total flux subtracted in 100 components = 0.244279 Jy
! Clean residual min=-0.019812 max=0.041167 Jy/beam
! Clean residual mean=-0.000042 rms=0.005555 Jy/beam
! Combined flux in latest and established models = 0.244279 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.244279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123583Jy  sigma=0.986922
! Fit after  self-cal, rms=0.118742Jy  sigma=0.952351
! Inverting map 
! Added new window around map position (-1, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0606418 Jy
! Component: 100  -  total flux cleaned = 0.0919406 Jy
! Total flux subtracted in 100 components = 0.0919406 Jy
! Clean residual min=-0.015644 max=0.024374 Jy/beam
! Clean residual mean=-0.000019 rms=0.003712 Jy/beam
! Combined flux in latest and established models = 0.33622 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 17 components and 0.33622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084263Jy  sigma=0.659817
! Fit after  self-cal, rms=0.080191Jy  sigma=0.626992
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268004 Jy
! Component: 100  -  total flux cleaned = 0.0285181 Jy
! Total flux subtracted in 100 components = 0.0285181 Jy
! Clean residual min=-0.012874 max=0.015111 Jy/beam
! Clean residual mean=-0.000013 rms=0.002680 Jy/beam
! Combined flux in latest and established models = 0.364738 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 21 components and 0.364738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072117Jy  sigma=0.559205
! Fit after  self-cal, rms=0.070895Jy  sigma=0.548196
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.443 mas, bmaj=7.237 mas, bpa=-6.18 degrees
! Estimated noise=0.898353 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00720221 Jy
! Component: 100  -  total flux cleaned = 0.00694743 Jy
! Component: 150  -  total flux cleaned = 0.00695073 Jy
! Component: 200  -  total flux cleaned = 0.00656761 Jy
! Total flux subtracted in 200 components = 0.00656761 Jy
! Clean residual min=-0.008257 max=0.009133 Jy/beam
! Clean residual mean=-0.000005 rms=0.001899 Jy/beam
! Combined flux in latest and established models = 0.371306 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 28 components and 0.371306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068358Jy  sigma=0.525761
! Fit after  self-cal, rms=0.067845Jy  sigma=0.521519
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.443 x 7.237 at -6.18 degrees (North through East)
! Clean map  min=-0.008453  max=0.19732 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.98     KP        0.99     
!   LA        1.03     MK        0.92     NL        0.98     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        0.99     HN        0.96     KP        0.98     
!   LA        1.03     MK        0.93     NL        0.97     OV        0.94     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.99     KP        0.98     
!   LA        1.01     MK        0.92     NL        1.25     OV        0.93     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.067845Jy  sigma=0.521519
! Fit after  self-cal, rms=0.066776Jy  sigma=0.491594
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.369 mas, bmaj=7.238 mas, bpa=-6.606 degrees
! Estimated noise=0.889485 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00249072 Jy
! Component: 100  -  total flux cleaned = -0.00324681 Jy
! Component: 150  -  total flux cleaned = -0.00354956 Jy
! Component: 200  -  total flux cleaned = -0.00368151 Jy
! Total flux subtracted in 200 components = -0.00368151 Jy
! Clean residual min=-0.006465 max=0.007126 Jy/beam
! Clean residual mean=-0.000007 rms=0.001529 Jy/beam
! Combined flux in latest and established models = 0.367624 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 0.367624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065739Jy  sigma=0.481949
! Fit after  self-cal, rms=0.065556Jy  sigma=0.479541
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065556Jy  sigma=0.479541
! Fit after  self-cal, rms=0.059459Jy  sigma=0.432297
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.358 mas, bmaj=7.135 mas, bpa=-6.253 degrees
! Estimated noise=0.879909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123559 Jy
! Component: 100  -  total flux cleaned = -0.00138007 Jy
! Component: 150  -  total flux cleaned = -0.00137457 Jy
! Component: 200  -  total flux cleaned = -0.00122016 Jy
! Total flux subtracted in 200 components = -0.00122016 Jy
! Clean residual min=-0.004658 max=0.004017 Jy/beam
! Clean residual mean=-0.000003 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.366404 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.366404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058881Jy  sigma=0.427219
! Fit after  self-cal, rms=0.058861Jy  sigma=0.425344
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105955 Jy
! Component: 100  -  total flux cleaned = 0.000205527 Jy
! Component: 150  -  total flux cleaned = 0.000195499 Jy
! Component: 200  -  total flux cleaned = 0.000193266 Jy
! Total flux subtracted in 200 components = 0.000193266 Jy
! Clean residual min=-0.004034 max=0.003452 Jy/beam
! Clean residual mean=-0.000002 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.366597 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.366597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058529Jy  sigma=0.422368
! Fit after  self-cal, rms=0.058482Jy  sigma=0.421400
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058482Jy  sigma=0.421400
! Fit after  self-cal, rms=0.058271Jy  sigma=0.421040
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=7.133 mas, bpa=-6.066 degrees
! Estimated noise=0.878855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00067631 Jy
! Component: 100  -  total flux cleaned = -0.00076887 Jy
! Component: 150  -  total flux cleaned = -0.000631839 Jy
! Component: 200  -  total flux cleaned = -0.000573761 Jy
! Total flux subtracted in 200 components = -0.000573761 Jy
! Clean residual min=-0.003531 max=0.003126 Jy/beam
! Clean residual mean=-0.000003 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.366024 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 60 components and 0.366024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058017Jy  sigma=0.418833
! Fit after  self-cal, rms=0.057984Jy  sigma=0.418215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.49568e-05 Jy
! Component: 100  -  total flux cleaned = -5.48273e-06 Jy
! Component: 150  -  total flux cleaned = -8.89295e-06 Jy
! Component: 200  -  total flux cleaned = 3.99114e-05 Jy
! Total flux subtracted in 200 components = 3.99114e-05 Jy
! Clean residual min=-0.003167 max=0.002839 Jy/beam
! Clean residual mean=-0.000003 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.366063 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 61 components and 0.366063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057817Jy  sigma=0.416784
! Fit after  self-cal, rms=0.057801Jy  sigma=0.416366
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057801Jy  sigma=0.416366
! Fit after  self-cal, rms=0.057618Jy  sigma=0.416219
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.58 mas, bmaj=10.45 mas, bpa=-8.941 degrees
! Estimated noise=1.10309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.91174e-05 Jy
! Component: 100  -  total flux cleaned = 0.000195496 Jy
! Component: 150  -  total flux cleaned = 0.000290124 Jy
! Component: 200  -  total flux cleaned = 0.00037566 Jy
! Total flux subtracted in 200 components = 0.00037566 Jy
! Clean residual min=-0.001812 max=0.001721 Jy/beam
! Clean residual mean=-0.000007 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.366439 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.366439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057540Jy  sigma=0.415702
! Fit after  self-cal, rms=0.057497Jy  sigma=0.415273
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.04781e-05 Jy
! Component: 100  -  total flux cleaned = 6.89091e-05 Jy
! Component: 150  -  total flux cleaned = 6.60612e-05 Jy
! Component: 200  -  total flux cleaned = 6.66238e-05 Jy
! Total flux subtracted in 200 components = 6.66238e-05 Jy
! Clean residual min=-0.001749 max=0.001655 Jy/beam
! Clean residual mean=-0.000007 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.366506 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.366506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057459Jy  sigma=0.414895
! Fit after  self-cal, rms=0.057428Jy  sigma=0.414640
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=7.133 mas, bpa=-5.949 degrees
! Estimated noise=0.877816 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.36 x 7.133 at -5.949 degrees (North through East)
! Clean map  min=-0.0023741  max=0.18751 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.855 mas, bmaj=6.439 mas, bpa=-5.929 degrees
! Estimated noise=1.31135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.176723 Jy
! Component: 100  -  total flux cleaned = 0.262195 Jy
! Component: 150  -  total flux cleaned = 0.30455 Jy
! Component: 200  -  total flux cleaned = 0.326127 Jy
! Total flux subtracted in 200 components = 0.326127 Jy
! Clean residual min=-0.005124 max=0.010344 Jy/beam
! Clean residual mean=-0.000013 rms=0.001397 Jy/beam
! Combined flux in latest and established models = 0.326127 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.326127 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=7.133 mas, bpa=-5.949 degrees
! Estimated noise=0.877816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153991 Jy
! Component: 100  -  total flux cleaned = 0.0246242 Jy
! Component: 150  -  total flux cleaned = 0.0304942 Jy
! Component: 200  -  total flux cleaned = 0.0337108 Jy
! Total flux subtracted in 200 components = 0.0337108 Jy
! Clean residual min=-0.002376 max=0.003540 Jy/beam
! Clean residual mean=-0.000008 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.359837 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 58 components and 0.359837 Jy
! Inverting map 
! Added new window around map position (30, -27.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221475 Jy
! Component: 100  -  total flux cleaned = 0.00362757 Jy
! Component: 150  -  total flux cleaned = 0.00467081 Jy
! Component: 200  -  total flux cleaned = 0.00507961 Jy
! Total flux subtracted in 200 components = 0.00507961 Jy
! Clean residual min=-0.001915 max=0.002022 Jy/beam
! Clean residual mean=-0.000006 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.364917 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 80 components and 0.364917 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.58 mas, bmaj=10.45 mas, bpa=-8.941 degrees
! Estimated noise=1.10309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162647 Jy
! Component: 100  -  total flux cleaned = 0.00177964 Jy
! Component: 150  -  total flux cleaned = 0.00186596 Jy
! Component: 200  -  total flux cleaned = 0.00193951 Jy
! Total flux subtracted in 200 components = 0.00193951 Jy
! Clean residual min=-0.001600 max=0.001696 Jy/beam
! Clean residual mean=-0.000009 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.366857 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.56298e-05 Jy
! Component: 100  -  total flux cleaned = 0.000125987 Jy
! Component: 150  -  total flux cleaned = 0.000181685 Jy
! Component: 200  -  total flux cleaned = 0.000216903 Jy
! Total flux subtracted in 200 components = 0.000216903 Jy
! Clean residual min=-0.001589 max=0.001647 Jy/beam
! Clean residual mean=-0.000008 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.367073 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 110 components and 0.367074 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=7.133 mas, bpa=-5.949 degrees
! Estimated noise=0.877816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000385001 Jy
! Component: 100  -  total flux cleaned = -0.000492465 Jy
! Component: 150  -  total flux cleaned = -0.000446129 Jy
! Component: 200  -  total flux cleaned = -0.000361508 Jy
! Total flux subtracted in 200 components = -0.000361508 Jy
! Clean residual min=-0.001936 max=0.001803 Jy/beam
! Clean residual mean=-0.000004 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.366712 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 117 components and 0.366712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057159Jy  sigma=0.412390
! Fit after  self-cal, rms=0.057113Jy  sigma=0.411735
wmodel J1143+1834_S_map.mod
! Writing 117 model components to file: J1143+1834_S_map.mod
wobs   J1143+1834_S_uvs.fits
! Writing UV FITS file: J1143+1834_S_uvs.fits
wwins  J1143+1834_S_map.win
! wwins: Wrote 3 windows to J1143+1834_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000207796 Jy
! Component: 100  -  total flux cleaned = -0.000272889 Jy
! Component: 150  -  total flux cleaned = -0.000154908 Jy
! Component: 200  -  total flux cleaned = -9.81511e-05 Jy
! Component: 250  -  total flux cleaned = -9.88796e-05 Jy
! Component: 300  -  total flux cleaned = -0.000124783 Jy
! Component: 350  -  total flux cleaned = -0.000149632 Jy
! Component: 400  -  total flux cleaned = -0.000174015 Jy
! Component: 450  -  total flux cleaned = -0.000293588 Jy
! Component: 500  -  total flux cleaned = -0.000246976 Jy
! Component: 550  -  total flux cleaned = -0.000248147 Jy
! Component: 600  -  total flux cleaned = -0.000248854 Jy
! Component: 650  -  total flux cleaned = -0.000227009 Jy
! Component: 700  -  total flux cleaned = -0.000226992 Jy
! Component: 750  -  total flux cleaned = -0.000205367 Jy
! Component: 800  -  total flux cleaned = -0.000163132 Jy
! Component: 850  -  total flux cleaned = -0.000142971 Jy
! Component: 900  -  total flux cleaned = -0.000163474 Jy
! Component: 950  -  total flux cleaned = -0.000143646 Jy
! Component: 1000  -  total flux cleaned = -0.000222937 Jy
! Component: 1050  -  total flux cleaned = -0.000183639 Jy
! Component: 1100  -  total flux cleaned = -0.000241645 Jy
! Component: 1150  -  total flux cleaned = -0.000260673 Jy
! Component: 1200  -  total flux cleaned = -0.000373551 Jy
! Component: 1250  -  total flux cleaned = -0.000354783 Jy
! Component: 1300  -  total flux cleaned = -0.000354881 Jy
! Component: 1350  -  total flux cleaned = -0.000445642 Jy
! Component: 1400  -  total flux cleaned = -0.000553061 Jy
! Component: 1450  -  total flux cleaned = -0.000570458 Jy
! Component: 1500  -  total flux cleaned = -0.000605282 Jy
! Component: 1550  -  total flux cleaned = -0.000570506 Jy
! Component: 1600  -  total flux cleaned = -0.000656028 Jy
! Component: 1650  -  total flux cleaned = -0.000672982 Jy
! Component: 1700  -  total flux cleaned = -0.000706262 Jy
! Component: 1750  -  total flux cleaned = -0.000722804 Jy
! Component: 1800  -  total flux cleaned = -0.000755583 Jy
! Component: 1850  -  total flux cleaned = -0.000739297 Jy
! Component: 1900  -  total flux cleaned = -0.000803245 Jy
! Component: 1950  -  total flux cleaned = -0.000818893 Jy
! Component: 2000  -  total flux cleaned = -0.000818894 Jy
! Component: 2050  -  total flux cleaned = -0.000865542 Jy
! Component: 2100  -  total flux cleaned = -0.000865452 Jy
! Component: 2150  -  total flux cleaned = -0.000819848 Jy
! Component: 2200  -  total flux cleaned = -0.000894929 Jy
! Component: 2250  -  total flux cleaned = -0.000954405 Jy
! Component: 2300  -  total flux cleaned = -0.000984064 Jy
! Component: 2350  -  total flux cleaned = -0.000984112 Jy
! Component: 2400  -  total flux cleaned = -0.00102751 Jy
! Component: 2450  -  total flux cleaned = -0.00109913 Jy
! Component: 2500  -  total flux cleaned = -0.00112772 Jy
! Component: 2550  -  total flux cleaned = -0.0011559 Jy
! Component: 2600  -  total flux cleaned = -0.00118363 Jy
! Component: 2650  -  total flux cleaned = -0.00118381 Jy
! Component: 2700  -  total flux cleaned = -0.00125246 Jy
! Component: 2750  -  total flux cleaned = -0.00126612 Jy
! Component: 2800  -  total flux cleaned = -0.00129318 Jy
! Component: 2850  -  total flux cleaned = -0.00131987 Jy
! Component: 2900  -  total flux cleaned = -0.00135972 Jy
! Component: 2950  -  total flux cleaned = -0.00135982 Jy
! Component: 3000  -  total flux cleaned = -0.00142512 Jy
! Component: 3050  -  total flux cleaned = -0.00145097 Jy
! Component: 3100  -  total flux cleaned = -0.00145091 Jy
! Component: 3150  -  total flux cleaned = -0.00152736 Jy
! Component: 3200  -  total flux cleaned = -0.00155272 Jy
! Component: 3250  -  total flux cleaned = -0.00157768 Jy
! Component: 3300  -  total flux cleaned = -0.00160267 Jy
! Component: 3350  -  total flux cleaned = -0.00163966 Jy
! Component: 3400  -  total flux cleaned = -0.00167619 Jy
! Component: 3450  -  total flux cleaned = -0.00165203 Jy
! Component: 3500  -  total flux cleaned = -0.00172453 Jy
! Component: 3550  -  total flux cleaned = -0.0017006 Jy
! Component: 3600  -  total flux cleaned = -0.00172439 Jy
! Component: 3650  -  total flux cleaned = -0.0017833 Jy
! Component: 3700  -  total flux cleaned = -0.00179497 Jy
! Component: 3750  -  total flux cleaned = -0.00187623 Jy
! Component: 3800  -  total flux cleaned = -0.00186466 Jy
! Component: 3850  -  total flux cleaned = -0.0018646 Jy
! Component: 3900  -  total flux cleaned = -0.00193291 Jy
! Component: 3950  -  total flux cleaned = -0.00198951 Jy
! Component: 4000  -  total flux cleaned = -0.00197834 Jy
! Component: 4050  -  total flux cleaned = -0.00197834 Jy
! Total flux subtracted in 4096 components = -0.00201165 Jy
! Clean residual min=-0.000584 max=0.000616 Jy/beam
! Clean residual mean=-0.000001 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.3647 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 424 components and 0.3647 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1143+1834_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.36 x 7.133 at -5.949 degrees (North through East)
! Clean map  min=-0.001492  max=0.18786 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1143+1834_S_map.fits
wmodel /image_prod/ug002_uva//J1143+1834_S_map.mod
! Writing 424 model components to file: /image_prod/ug002_uva//J1143+1834_S_map.mod
wobs   /image_prod/ug002_uva//J1143+1834_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1143+1834_S_uvs.fits
wwins  /image_prod/ug002_uva//J1143+1834_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1143+1834_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.187863 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000204034 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.325823 0.325823 0.651646 1.30329 2.60658 5.21317 10.4263 20.8527 41.7054 83.4107
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.187 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  920.745 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1143+1834_S_dfm.log closed on Thu Mar  5 00:09:33 2020