! Started logfile: /image_prod/ug002_uva//J1136+3407_S_dfm.log on Thu Mar 5 00:07:17 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1136+3407_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1136+3407_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.838025 visibilities/baseline/integration-bin. ! Found source: J1136+3407 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5091 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1136+3407_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017875Jy sigma=9.171452 ! Fit after self-cal, rms=0.867777Jy sigma=7.824260 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=5.601 mas, bpa=-5.567 degrees ! Estimated noise=1.51251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103738 Jy ! Component: 100 - total flux cleaned = 0.126375 Jy ! Total flux subtracted in 100 components = 0.126375 Jy ! Clean residual min=-0.004240 max=0.006351 Jy/beam ! Clean residual mean=-0.000004 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.126375 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.126375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062834Jy sigma=0.462281 ! Fit after self-cal, rms=0.062828Jy sigma=0.462221 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=6.457 mas, bpa=-6.716 degrees ! Estimated noise=1.15108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00517473 Jy ! Component: 100 - total flux cleaned = 0.00726818 Jy ! Component: 150 - total flux cleaned = 0.00755955 Jy ! Component: 200 - total flux cleaned = 0.00769683 Jy ! Total flux subtracted in 200 components = 0.00769683 Jy ! Clean residual min=-0.004329 max=0.003209 Jy/beam ! Clean residual mean=-0.000001 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.134072 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.134072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062207Jy sigma=0.459185 ! Fit after self-cal, rms=0.062202Jy sigma=0.459159 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.539 x 6.457 at -6.716 degrees (North through East) ! Clean map min=-0.0042207 max=0.13218 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.07 KP 1.03 ! LA 1.04 MK 0.98 NL 1.01 OV 0.82 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.00 KP 1.01 ! LA 1.03 MK 1.01 NL 1.04 OV 0.89 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.01 KP 1.06 ! LA 1.06 MK 0.96 NL 0.93 OV 0.87 ! PT 1.05 SC 0.95 ! ! ! Fit before self-cal, rms=0.062202Jy sigma=0.459159 ! Fit after self-cal, rms=0.061288Jy sigma=0.450167 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=6.435 mas, bpa=-6.264 degrees ! Estimated noise=1.15386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114348 Jy ! Component: 100 - total flux cleaned = 0.00145758 Jy ! Component: 150 - total flux cleaned = 0.00155539 Jy ! Component: 200 - total flux cleaned = 0.00157239 Jy ! Total flux subtracted in 200 components = 0.00157239 Jy ! Clean residual min=-0.003103 max=0.002407 Jy/beam ! Clean residual mean=0.000001 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.135644 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.135644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061227Jy sigma=0.450157 ! Fit after self-cal, rms=0.061229Jy sigma=0.450068 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061229Jy sigma=0.450068 ! Fit after self-cal, rms=0.056349Jy sigma=0.438920 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=6.43 mas, bpa=-6.402 degrees ! Estimated noise=1.15356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131592 Jy ! Component: 100 - total flux cleaned = 0.000131444 Jy ! Component: 150 - total flux cleaned = 0.000147591 Jy ! Component: 200 - total flux cleaned = 0.000161153 Jy ! Total flux subtracted in 200 components = 0.000161153 Jy ! Clean residual min=-0.001922 max=0.001936 Jy/beam ! Clean residual mean=0.000000 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.135806 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.135806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056334Jy sigma=0.438837 ! Fit after self-cal, rms=0.056327Jy sigma=0.438753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.24641e-05 Jy ! Component: 100 - total flux cleaned = -3.24855e-05 Jy ! Component: 150 - total flux cleaned = -2.03602e-05 Jy ! Component: 200 - total flux cleaned = -2.07267e-05 Jy ! Total flux subtracted in 200 components = -2.07267e-05 Jy ! Clean residual min=-0.001922 max=0.001927 Jy/beam ! Clean residual mean=0.000000 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.135785 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.135785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056322Jy sigma=0.438711 ! Fit after self-cal, rms=0.056321Jy sigma=0.438707 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056321Jy sigma=0.438707 ! Fit after self-cal, rms=0.056391Jy sigma=0.438661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=6.43 mas, bpa=-6.424 degrees ! Estimated noise=1.15433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243327 Jy ! Component: 100 - total flux cleaned = 0.000230762 Jy ! Component: 150 - total flux cleaned = 0.000219826 Jy ! Component: 200 - total flux cleaned = 0.000209535 Jy ! Total flux subtracted in 200 components = 0.000209535 Jy ! Clean residual min=-0.001942 max=0.001905 Jy/beam ! Clean residual mean=0.000000 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.135994 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.135994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056385Jy sigma=0.438620 ! Fit after self-cal, rms=0.056385Jy sigma=0.438618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.13878e-05 Jy ! Component: 100 - total flux cleaned = -1.08104e-06 Jy ! Component: 150 - total flux cleaned = -1.08531e-05 Jy ! Component: 200 - total flux cleaned = -1.10449e-05 Jy ! Total flux subtracted in 200 components = -1.10449e-05 Jy ! Clean residual min=-0.001929 max=0.001895 Jy/beam ! Clean residual mean=0.000000 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.135983 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.135983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056382Jy sigma=0.438590 ! Fit after self-cal, rms=0.056382Jy sigma=0.438589 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056382Jy sigma=0.438589 ! Fit after self-cal, rms=0.056443Jy sigma=0.438583 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.09 mas, bmaj=10.2 mas, bpa=-4.296 degrees ! Estimated noise=1.37865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235552 Jy ! Component: 100 - total flux cleaned = 0.000262059 Jy ! Component: 150 - total flux cleaned = 0.000283872 Jy ! Component: 200 - total flux cleaned = 0.000297776 Jy ! Total flux subtracted in 200 components = 0.000297776 Jy ! Clean residual min=-0.001812 max=0.002067 Jy/beam ! Clean residual mean=-0.000000 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.136281 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.136281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056442Jy sigma=0.438580 ! Fit after self-cal, rms=0.056441Jy sigma=0.438577 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.86295e-06 Jy ! Component: 100 - total flux cleaned = 1.12359e-05 Jy ! Component: 150 - total flux cleaned = 1.89079e-05 Jy ! Component: 200 - total flux cleaned = 2.60554e-05 Jy ! Total flux subtracted in 200 components = 2.60554e-05 Jy ! Clean residual min=-0.001804 max=0.002072 Jy/beam ! Clean residual mean=-0.000000 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.136307 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.136307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056441Jy sigma=0.438573 ! Fit after self-cal, rms=0.056441Jy sigma=0.438572 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=6.43 mas, bpa=-6.443 degrees ! Estimated noise=1.1554 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.494 x 6.43 at -6.443 degrees (North through East) ! Clean map min=-0.0018462 max=0.13261 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=5.575 mas, bpa=-5.307 degrees ! Estimated noise=1.50308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103093 Jy ! Component: 100 - total flux cleaned = 0.125625 Jy ! Component: 150 - total flux cleaned = 0.131439 Jy ! Component: 200 - total flux cleaned = 0.13416 Jy ! Total flux subtracted in 200 components = 0.13416 Jy ! Clean residual min=-0.002844 max=0.003228 Jy/beam ! Clean residual mean=-0.000002 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.13416 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.13416 Jy ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=6.43 mas, bpa=-6.443 degrees ! Estimated noise=1.1554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113264 Jy ! Component: 100 - total flux cleaned = 0.00143528 Jy ! Component: 150 - total flux cleaned = 0.00165765 Jy ! Component: 200 - total flux cleaned = 0.00179967 Jy ! Total flux subtracted in 200 components = 0.00179967 Jy ! Clean residual min=-0.001904 max=0.001919 Jy/beam ! Clean residual mean=-0.000000 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.135959 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.135959 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.09 mas, bmaj=10.2 mas, bpa=-4.296 degrees ! Estimated noise=1.37865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239954 Jy ! Component: 100 - total flux cleaned = 0.000273269 Jy ! Component: 150 - total flux cleaned = 0.000291268 Jy ! Component: 200 - total flux cleaned = 0.000291132 Jy ! Total flux subtracted in 200 components = 0.000291132 Jy ! Clean residual min=-0.001815 max=0.002065 Jy/beam ! Clean residual mean=-0.000000 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.13625 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.27153e-07 Jy ! Component: 100 - total flux cleaned = -6.73593e-06 Jy ! Component: 150 - total flux cleaned = -6.95174e-06 Jy ! Component: 200 - total flux cleaned = -6.946e-06 Jy ! Total flux subtracted in 200 components = -6.946e-06 Jy ! Clean residual min=-0.001811 max=0.002070 Jy/beam ! Clean residual mean=-0.000000 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.136243 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.136243 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=6.43 mas, bpa=-6.443 degrees ! Estimated noise=1.1554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.51086e-05 Jy ! Component: 100 - total flux cleaned = -5.191e-05 Jy ! Component: 150 - total flux cleaned = -3.73039e-05 Jy ! Component: 200 - total flux cleaned = -3.76341e-05 Jy ! Total flux subtracted in 200 components = -3.76341e-05 Jy ! Clean residual min=-0.001935 max=0.001908 Jy/beam ! Clean residual mean=-0.000000 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.136206 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.136206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056444Jy sigma=0.438617 ! Fit after self-cal, rms=0.056443Jy sigma=0.438614 wmodel J1136+3407_S_map.mod ! Writing 52 model components to file: J1136+3407_S_map.mod wobs J1136+3407_S_uvs.fits ! Writing UV FITS file: J1136+3407_S_uvs.fits wwins J1136+3407_S_map.win ! wwins: Wrote 1 windows to J1136+3407_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.31513e-05 Jy ! Component: 100 - total flux cleaned = -0.00023516 Jy ! Component: 150 - total flux cleaned = -0.000514617 Jy ! Component: 200 - total flux cleaned = -0.000663172 Jy ! Component: 250 - total flux cleaned = -0.000749751 Jy ! Component: 300 - total flux cleaned = -0.000862035 Jy ! Component: 350 - total flux cleaned = -0.000917077 Jy ! Component: 400 - total flux cleaned = -0.00102343 Jy ! Component: 450 - total flux cleaned = -0.00112719 Jy ! Component: 500 - total flux cleaned = -0.00120375 Jy ! Component: 550 - total flux cleaned = -0.00132785 Jy ! Component: 600 - total flux cleaned = -0.00135211 Jy ! Component: 650 - total flux cleaned = -0.0014726 Jy ! Component: 700 - total flux cleaned = -0.00154323 Jy ! Component: 750 - total flux cleaned = -0.00161264 Jy ! Component: 800 - total flux cleaned = -0.00163556 Jy ! Component: 850 - total flux cleaned = -0.00174789 Jy ! Component: 900 - total flux cleaned = -0.00185845 Jy ! Component: 950 - total flux cleaned = -0.00192406 Jy ! Component: 1000 - total flux cleaned = -0.00198831 Jy ! Component: 1050 - total flux cleaned = -0.00207272 Jy ! Component: 1100 - total flux cleaned = -0.00205199 Jy ! Component: 1150 - total flux cleaned = -0.00223672 Jy ! Component: 1200 - total flux cleaned = -0.00223656 Jy ! Component: 1250 - total flux cleaned = -0.00235629 Jy ! Component: 1300 - total flux cleaned = -0.00239543 Jy ! Component: 1350 - total flux cleaned = -0.00245357 Jy ! Component: 1400 - total flux cleaned = -0.00254944 Jy ! Component: 1450 - total flux cleaned = -0.00260634 Jy ! Component: 1500 - total flux cleaned = -0.00271888 Jy ! Component: 1550 - total flux cleaned = -0.00279297 Jy ! Component: 1600 - total flux cleaned = -0.00286627 Jy ! Component: 1650 - total flux cleaned = -0.00292069 Jy ! Component: 1700 - total flux cleaned = -0.00299206 Jy ! Component: 1750 - total flux cleaned = -0.00308025 Jy ! Component: 1800 - total flux cleaned = -0.00314999 Jy ! Component: 1850 - total flux cleaned = -0.0031843 Jy ! Component: 1900 - total flux cleaned = -0.00320138 Jy ! Component: 1950 - total flux cleaned = -0.00326947 Jy ! Component: 2000 - total flux cleaned = -0.00340326 Jy ! Component: 2050 - total flux cleaned = -0.00338666 Jy ! Component: 2100 - total flux cleaned = -0.00345235 Jy ! Component: 2150 - total flux cleaned = -0.00348498 Jy ! Component: 2200 - total flux cleaned = -0.00354913 Jy ! Component: 2250 - total flux cleaned = -0.00362859 Jy ! Component: 2300 - total flux cleaned = -0.00370733 Jy ! Component: 2350 - total flux cleaned = -0.00375387 Jy ! Component: 2400 - total flux cleaned = -0.00379986 Jy ! Component: 2450 - total flux cleaned = -0.00384576 Jy ! Component: 2500 - total flux cleaned = -0.00390634 Jy ! Component: 2550 - total flux cleaned = -0.00395125 Jy ! Component: 2600 - total flux cleaned = -0.00407001 Jy ! Component: 2650 - total flux cleaned = -0.00407005 Jy ! Component: 2700 - total flux cleaned = -0.00415725 Jy ! Component: 2750 - total flux cleaned = -0.00420051 Jy ! Component: 2800 - total flux cleaned = -0.00427176 Jy ! Component: 2850 - total flux cleaned = -0.0042719 Jy ! Component: 2900 - total flux cleaned = -0.00434229 Jy ! Component: 2950 - total flux cleaned = -0.00434231 Jy ! Component: 3000 - total flux cleaned = -0.00448001 Jy ! Component: 3050 - total flux cleaned = -0.00449329 Jy ! Component: 3100 - total flux cleaned = -0.00452042 Jy ! Component: 3150 - total flux cleaned = -0.0045471 Jy ! Component: 3200 - total flux cleaned = -0.00460026 Jy ! Component: 3250 - total flux cleaned = -0.00457365 Jy ! Component: 3300 - total flux cleaned = -0.00458675 Jy ! Component: 3350 - total flux cleaned = -0.00458667 Jy ! Component: 3400 - total flux cleaned = -0.00458677 Jy ! Component: 3450 - total flux cleaned = -0.00462513 Jy ! Component: 3500 - total flux cleaned = -0.00467572 Jy ! Component: 3550 - total flux cleaned = -0.00466315 Jy ! Component: 3600 - total flux cleaned = -0.00472551 Jy ! Component: 3650 - total flux cleaned = -0.00477494 Jy ! Component: 3700 - total flux cleaned = -0.00481168 Jy ! Component: 3750 - total flux cleaned = -0.00488455 Jy ! Component: 3800 - total flux cleaned = -0.00488439 Jy ! Component: 3850 - total flux cleaned = -0.00494419 Jy ! Component: 3900 - total flux cleaned = -0.00495599 Jy ! Component: 3950 - total flux cleaned = -0.00497949 Jy ! Component: 4000 - total flux cleaned = -0.00501452 Jy ! Component: 4050 - total flux cleaned = -0.00506094 Jy ! Total flux subtracted in 4096 components = -0.00511856 Jy ! Clean residual min=-0.000797 max=0.000667 Jy/beam ! Clean residual mean=-0.000002 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.131087 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 338 components and 0.131087 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1136+3407_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.494 x 6.43 at -6.443 degrees (North through East) ! Clean map min=-0.0016563 max=0.13237 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1136+3407_S_map.fits wmodel /image_prod/ug002_uva//J1136+3407_S_map.mod ! Writing 338 model components to file: /image_prod/ug002_uva//J1136+3407_S_map.mod wobs /image_prod/ug002_uva//J1136+3407_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1136+3407_S_uvs.fits wwins /image_prod/ug002_uva//J1136+3407_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1136+3407_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.132368 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.469146 0.469146 0.938291 1.87658 3.75317 7.50633 15.0127 30.0253 60.0506 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.132 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 639.46 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1136+3407_S_dfm.log closed on Thu Mar 5 00:07:20 2020