! Started logfile: /image_prod/ug002_uva//J1135-0428_X_dfm.log on Thu Mar  5 00:07:12 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1135-0428_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1135-0428_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.830556 visibilities/baseline/integration-bin.
! Found source: J1135-0428
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 21528 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1135-0428_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019393Jy  sigma=8.442161
! Fit after  self-cal, rms=0.803587Jy  sigma=6.625396
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6535 mas, bmaj=1.661 mas, bpa=-1.062 degrees
! Estimated noise=1.03908 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157049 Jy
! Component: 100  -  total flux cleaned = 0.191295 Jy
! Total flux subtracted in 100 components = 0.191295 Jy
! Clean residual min=-0.006944 max=0.010796 Jy/beam
! Clean residual mean=-0.000007 rms=0.001267 Jy/beam
! Combined flux in latest and established models = 0.191295 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.191295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071136Jy  sigma=0.501363
! Fit after  self-cal, rms=0.071116Jy  sigma=0.501333
! Inverting map 
! Added new window around map position (1.8, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107769 Jy
! Component: 100  -  total flux cleaned = 0.0160228 Jy
! Total flux subtracted in 100 components = 0.0160228 Jy
! Clean residual min=-0.004884 max=0.008697 Jy/beam
! Clean residual mean=-0.000003 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.207318 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.207318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069876Jy  sigma=0.482157
! Fit after  self-cal, rms=0.069809Jy  sigma=0.481469
! Inverting map 
! Added new window around map position (-1.8, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00622195 Jy
! Component: 100  -  total flux cleaned = 0.00756655 Jy
! Total flux subtracted in 100 components = 0.00756655 Jy
! Clean residual min=-0.004859 max=0.004101 Jy/beam
! Clean residual mean=-0.000002 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.214885 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.214885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069294Jy  sigma=0.475181
! Fit after  self-cal, rms=0.069288Jy  sigma=0.475011
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8166 mas, bmaj=1.891 mas, bpa=-0.02403 degrees
! Estimated noise=0.597105 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286342 Jy
! Component: 100  -  total flux cleaned = 0.00343212 Jy
! Component: 150  -  total flux cleaned = 0.00401898 Jy
! Component: 200  -  total flux cleaned = 0.00450543 Jy
! Total flux subtracted in 200 components = 0.00450543 Jy
! Clean residual min=-0.005050 max=0.004250 Jy/beam
! Clean residual mean=0.000000 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 0.21939 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.21939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069117Jy  sigma=0.472437
! Fit after  self-cal, rms=0.069119Jy  sigma=0.472388
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8166 x 1.891 at -0.02403 degrees (North through East)
! Clean map  min=-0.0048589  max=0.19996 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.00     KP        1.04     
!   MK        1.00     NL        1.05     OV        0.91     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.97     KP        1.03     
!   MK        0.98     NL        1.06     OV        0.93     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.00     KP        1.01     
!   MK        1.00     NL        1.04     OV        0.89     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.98     KP        1.00     
!   MK        1.00     NL        1.02     OV        0.91     PT        0.97     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        1.01     
!   MK        0.98     NL        1.05     OV        0.92     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.03     KP        1.01     
!   MK        1.01     NL        1.05     OV        0.90     PT        0.95     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.97     KP        1.02     
!   MK        1.00     NL        1.04     OV        0.92     PT        0.95     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        1.00     
!   MK        0.97     NL        1.03     OV        0.92     PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        1.02     
!   MK        1.00     NL        1.05     OV        0.93     PT        0.93     
!   SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.97     KP        1.01     
!   MK        1.02     NL        1.03     OV        0.91     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        1.02     
!   MK        1.01     NL        1.08     OV        0.92     PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.06     KP        0.97     
!   MK        1.05     NL        1.04     OV        0.91     PT        0.98     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.069119Jy  sigma=0.472388
! Fit after  self-cal, rms=0.067353Jy  sigma=0.462484
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8208 mas, bmaj=1.901 mas, bpa=0.04524 degrees
! Estimated noise=0.591022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.002704 Jy
! Component: 100  -  total flux cleaned = -0.0042754 Jy
! Component: 150  -  total flux cleaned = -0.00535213 Jy
! Component: 200  -  total flux cleaned = -0.00612816 Jy
! Total flux subtracted in 200 components = -0.00612816 Jy
! Clean residual min=-0.003667 max=0.003913 Jy/beam
! Clean residual mean=0.000001 rms=0.001108 Jy/beam
! Combined flux in latest and established models = 0.213262 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 45 components and 0.213262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067147Jy  sigma=0.461897
! Fit after  self-cal, rms=0.067154Jy  sigma=0.461844
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067154Jy  sigma=0.461844
! Fit after  self-cal, rms=0.071042Jy  sigma=0.440140
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8203 mas, bmaj=1.901 mas, bpa=0.009091 degrees
! Estimated noise=0.592406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00150213 Jy
! Component: 100  -  total flux cleaned = -0.00178399 Jy
! Component: 150  -  total flux cleaned = -0.00168439 Jy
! Component: 200  -  total flux cleaned = -0.00164029 Jy
! Total flux subtracted in 200 components = -0.00164029 Jy
! Clean residual min=-0.001971 max=0.001658 Jy/beam
! Clean residual mean=-0.000000 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.211622 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.211622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071005Jy  sigma=0.439788
! Fit after  self-cal, rms=0.071101Jy  sigma=0.439740
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.45231e-06 Jy
! Component: 100  -  total flux cleaned = 2.99542e-05 Jy
! Component: 150  -  total flux cleaned = 6.5048e-05 Jy
! Component: 200  -  total flux cleaned = 9.68453e-05 Jy
! Total flux subtracted in 200 components = 9.68453e-05 Jy
! Clean residual min=-0.001959 max=0.001651 Jy/beam
! Clean residual mean=-0.000000 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.211719 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.211719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071099Jy  sigma=0.439633
! Fit after  self-cal, rms=0.071097Jy  sigma=0.439631
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071097Jy  sigma=0.439631
! Fit after  self-cal, rms=0.077656Jy  sigma=0.437237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8197 mas, bmaj=1.9 mas, bpa=0.05046 degrees
! Estimated noise=0.592232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123714 Jy
! Component: 100  -  total flux cleaned = -0.001364 Jy
! Component: 150  -  total flux cleaned = -0.0012512 Jy
! Component: 200  -  total flux cleaned = -0.00113186 Jy
! Total flux subtracted in 200 components = -0.00113186 Jy
! Clean residual min=-0.001300 max=0.001239 Jy/beam
! Clean residual mean=-0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.210587 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 57 components and 0.210587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077627Jy  sigma=0.436989
! Fit after  self-cal, rms=0.077662Jy  sigma=0.436981
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.87278e-05 Jy
! Component: 100  -  total flux cleaned = 0.000117124 Jy
! Component: 150  -  total flux cleaned = 0.000131642 Jy
! Component: 200  -  total flux cleaned = 0.000144978 Jy
! Total flux subtracted in 200 components = 0.000144978 Jy
! Clean residual min=-0.001283 max=0.001226 Jy/beam
! Clean residual mean=-0.000000 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.210732 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 58 components and 0.210732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077655Jy  sigma=0.436920
! Fit after  self-cal, rms=0.077653Jy  sigma=0.436919
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077653Jy  sigma=0.436919
! Fit after  self-cal, rms=0.077718Jy  sigma=0.436805
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.122 mas, bmaj=3.244 mas, bpa=2.158 degrees
! Estimated noise=0.775948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000822043 Jy
! Component: 100  -  total flux cleaned = -0.00111796 Jy
! Component: 150  -  total flux cleaned = -0.00117689 Jy
! Component: 200  -  total flux cleaned = -0.00121268 Jy
! Total flux subtracted in 200 components = -0.00121268 Jy
! Clean residual min=-0.001644 max=0.001424 Jy/beam
! Clean residual mean=-0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.209519 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 63 components and 0.209519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077708Jy  sigma=0.436738
! Fit after  self-cal, rms=0.077706Jy  sigma=0.436728
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.20307e-05 Jy
! Component: 100  -  total flux cleaned = -1.45023e-05 Jy
! Component: 150  -  total flux cleaned = -8.70983e-06 Jy
! Component: 200  -  total flux cleaned = -4.1003e-06 Jy
! Total flux subtracted in 200 components = -4.1003e-06 Jy
! Clean residual min=-0.001648 max=0.001435 Jy/beam
! Clean residual mean=-0.000001 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.209515 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 66 components and 0.209515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077705Jy  sigma=0.436721
! Fit after  self-cal, rms=0.077704Jy  sigma=0.436718
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8193 mas, bmaj=1.899 mas, bpa=0.0993 degrees
! Estimated noise=0.59201 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8193 x 1.899 at 0.0993 degrees (North through East)
! Clean map  min=-0.001185  max=0.19964 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6549 mas, bmaj=1.664 mas, bpa=-0.9077 degrees
! Estimated noise=1.03603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156564 Jy
! Component: 100  -  total flux cleaned = 0.190706 Jy
! Component: 150  -  total flux cleaned = 0.199214 Jy
! Component: 200  -  total flux cleaned = 0.203486 Jy
! Total flux subtracted in 200 components = 0.203486 Jy
! Clean residual min=-0.002377 max=0.002756 Jy/beam
! Clean residual mean=-0.000001 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.203486 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.203486 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8193 mas, bmaj=1.899 mas, bpa=0.0993 degrees
! Estimated noise=0.59201 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305531 Jy
! Component: 100  -  total flux cleaned = 0.00485864 Jy
! Component: 150  -  total flux cleaned = 0.00551112 Jy
! Component: 200  -  total flux cleaned = 0.00575355 Jy
! Total flux subtracted in 200 components = 0.00575355 Jy
! Clean residual min=-0.001328 max=0.001195 Jy/beam
! Clean residual mean=-0.000000 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.20924 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 24 components and 0.20924 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.122 mas, bmaj=3.244 mas, bpa=2.158 degrees
! Estimated noise=0.775948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000666838 Jy
! Component: 100  -  total flux cleaned = 0.000573073 Jy
! Component: 150  -  total flux cleaned = 0.000528474 Jy
! Component: 200  -  total flux cleaned = 0.000493544 Jy
! Total flux subtracted in 200 components = 0.000493544 Jy
! Clean residual min=-0.001620 max=0.001462 Jy/beam
! Clean residual mean=-0.000000 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.209733 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.4195e-05 Jy
! Component: 100  -  total flux cleaned = -0.000107729 Jy
! Component: 150  -  total flux cleaned = -0.000133538 Jy
! Component: 200  -  total flux cleaned = -0.000155175 Jy
! Total flux subtracted in 200 components = -0.000155175 Jy
! Clean residual min=-0.001639 max=0.001458 Jy/beam
! Clean residual mean=-0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.209578 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 46 components and 0.209578 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8193 mas, bmaj=1.899 mas, bpa=0.0993 degrees
! Estimated noise=0.59201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.55124e-05 Jy
! Component: 100  -  total flux cleaned = 8.65656e-05 Jy
! Component: 150  -  total flux cleaned = 6.51673e-05 Jy
! Component: 200  -  total flux cleaned = 2.7838e-05 Jy
! Total flux subtracted in 200 components = 2.7838e-05 Jy
! Clean residual min=-0.001201 max=0.001225 Jy/beam
! Clean residual mean=-0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.209606 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.209606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077709Jy  sigma=0.436778
! Fit after  self-cal, rms=0.077708Jy  sigma=0.436769
wmodel J1135-0428_X_map.mod
! Writing 54 model components to file: J1135-0428_X_map.mod
wobs   J1135-0428_X_uvs.fits
! Writing UV FITS file: J1135-0428_X_uvs.fits
wwins  J1135-0428_X_map.win
! wwins: Wrote 3 windows to J1135-0428_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001564 Jy
! Component: 100  -  total flux cleaned = -0.000219598 Jy
! Component: 150  -  total flux cleaned = -0.000200425 Jy
! Component: 200  -  total flux cleaned = -0.000105901 Jy
! Component: 250  -  total flux cleaned = -8.73794e-05 Jy
! Component: 300  -  total flux cleaned = -6.97002e-05 Jy
! Component: 350  -  total flux cleaned = -5.19661e-05 Jy
! Component: 400  -  total flux cleaned = -3.51578e-05 Jy
! Component: 450  -  total flux cleaned = -3.52754e-05 Jy
! Component: 500  -  total flux cleaned = -5.09799e-05 Jy
! Component: 550  -  total flux cleaned = -5.09435e-05 Jy
! Component: 600  -  total flux cleaned = -8.17105e-05 Jy
! Component: 650  -  total flux cleaned = -6.6315e-05 Jy
! Component: 700  -  total flux cleaned = -2.15533e-05 Jy
! Component: 750  -  total flux cleaned = 7.77632e-06 Jy
! Component: 800  -  total flux cleaned = 7.96053e-05 Jy
! Component: 850  -  total flux cleaned = 0.000164181 Jy
! Component: 900  -  total flux cleaned = 0.000191838 Jy
! Component: 950  -  total flux cleaned = 0.000273803 Jy
! Component: 1000  -  total flux cleaned = 0.000260033 Jy
! Component: 1050  -  total flux cleaned = 0.000273322 Jy
! Component: 1100  -  total flux cleaned = 0.000299621 Jy
! Component: 1150  -  total flux cleaned = 0.000312698 Jy
! Component: 1200  -  total flux cleaned = 0.000351046 Jy
! Component: 1250  -  total flux cleaned = 0.000338523 Jy
! Component: 1300  -  total flux cleaned = 0.000375869 Jy
! Component: 1350  -  total flux cleaned = 0.00040031 Jy
! Component: 1400  -  total flux cleaned = 0.0003883 Jy
! Component: 1450  -  total flux cleaned = 0.000412411 Jy
! Component: 1500  -  total flux cleaned = 0.000376484 Jy
! Component: 1550  -  total flux cleaned = 0.000399975 Jy
! Component: 1600  -  total flux cleaned = 0.000341757 Jy
! Component: 1650  -  total flux cleaned = 0.000410793 Jy
! Component: 1700  -  total flux cleaned = 0.000342329 Jy
! Component: 1750  -  total flux cleaned = 0.000364938 Jy
! Component: 1800  -  total flux cleaned = 0.000420895 Jy
! Component: 1850  -  total flux cleaned = 0.00036549 Jy
! Component: 1900  -  total flux cleaned = 0.00037648 Jy
! Component: 1950  -  total flux cleaned = 0.000409069 Jy
! Component: 2000  -  total flux cleaned = 0.000355264 Jy
! Component: 2050  -  total flux cleaned = 0.000419439 Jy
! Component: 2100  -  total flux cleaned = 0.000440328 Jy
! Component: 2150  -  total flux cleaned = 0.000387932 Jy
! Component: 2200  -  total flux cleaned = 0.000388014 Jy
! Component: 2250  -  total flux cleaned = 0.000377745 Jy
! Component: 2300  -  total flux cleaned = 0.000377804 Jy
! Component: 2350  -  total flux cleaned = 0.000377885 Jy
! Component: 2400  -  total flux cleaned = 0.000408079 Jy
! Component: 2450  -  total flux cleaned = 0.0003882 Jy
! Component: 2500  -  total flux cleaned = 0.000358663 Jy
! Component: 2550  -  total flux cleaned = 0.000388077 Jy
! Component: 2600  -  total flux cleaned = 0.000388133 Jy
! Component: 2650  -  total flux cleaned = 0.000378338 Jy
! Component: 2700  -  total flux cleaned = 0.000378328 Jy
! Component: 2750  -  total flux cleaned = 0.000416284 Jy
! Component: 2800  -  total flux cleaned = 0.000397489 Jy
! Component: 2850  -  total flux cleaned = 0.000397547 Jy
! Component: 2900  -  total flux cleaned = 0.000416122 Jy
! Component: 2950  -  total flux cleaned = 0.000406978 Jy
! Component: 3000  -  total flux cleaned = 0.000443495 Jy
! Component: 3050  -  total flux cleaned = 0.00043441 Jy
! Component: 3100  -  total flux cleaned = 0.000389322 Jy
! Component: 3150  -  total flux cleaned = 0.000416225 Jy
! Component: 3200  -  total flux cleaned = 0.000433925 Jy
! Component: 3250  -  total flux cleaned = 0.000407341 Jy
! Component: 3300  -  total flux cleaned = 0.000354651 Jy
! Component: 3350  -  total flux cleaned = 0.000354812 Jy
! Component: 3400  -  total flux cleaned = 0.000363534 Jy
! Component: 3450  -  total flux cleaned = 0.000354931 Jy
! Component: 3500  -  total flux cleaned = 0.000363501 Jy
! Component: 3550  -  total flux cleaned = 0.000354971 Jy
! Component: 3600  -  total flux cleaned = 0.000371885 Jy
! Component: 3650  -  total flux cleaned = 0.00034657 Jy
! Component: 3700  -  total flux cleaned = 0.000363381 Jy
! Component: 3750  -  total flux cleaned = 0.000380038 Jy
! Component: 3800  -  total flux cleaned = 0.000396573 Jy
! Component: 3850  -  total flux cleaned = 0.000371917 Jy
! Component: 3900  -  total flux cleaned = 0.000388237 Jy
! Component: 3950  -  total flux cleaned = 0.000396303 Jy
! Component: 4000  -  total flux cleaned = 0.000371988 Jy
! Component: 4050  -  total flux cleaned = 0.000363901 Jy
! Total flux subtracted in 4096 components = 0.000355906 Jy
! Clean residual min=-0.000425 max=0.000445 Jy/beam
! Clean residual mean=0.000000 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.209962 Jy
keep
! Adding 310 model components to the UV plane model.
! The established model now contains 364 components and 0.209962 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1135-0428_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8193 x 1.899 at 0.0993 degrees (North through East)
! Clean map  min=-0.00081904  max=0.1996 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1135-0428_X_map.fits
wmodel /image_prod/ug002_uva//J1135-0428_X_map.mod
! Writing 364 model components to file: /image_prod/ug002_uva//J1135-0428_X_map.mod
wobs   /image_prod/ug002_uva//J1135-0428_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1135-0428_X_uvs.fits
wwins  /image_prod/ug002_uva//J1135-0428_X_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1135-0428_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.199604 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000137163 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.206153 0.206153 0.412307 0.824614 1.64923 3.29846 6.59691 13.1938 26.3876 52.7753
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.199 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1455.23 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1135-0428_X_dfm.log closed on Thu Mar  5 00:07:16 2020