! Started logfile: /image_prod/ug002_uva//J1130+3031_X_dfm.log on Thu Mar 5 00:05:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1130+3031_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1130+3031_X_uva.fits ! AN table 1: 15 integrations on 36 of 36 possible baselines. ! AN table 2: 15 integrations on 36 of 36 possible baselines. ! AN table 3: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.965432 visibilities/baseline/integration-bin. ! Found source: J1130+3031 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 18768 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1130+3031_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.015021Jy sigma=8.915761 ! Fit after self-cal, rms=0.812871Jy sigma=7.135937 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7075 mas, bmaj=1.326 mas, bpa=-6.196 degrees ! Estimated noise=1.13324 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140205 Jy ! Component: 100 - total flux cleaned = 0.17661 Jy ! Total flux subtracted in 100 components = 0.17661 Jy ! Clean residual min=-0.007783 max=0.022194 Jy/beam ! Clean residual mean=-0.000004 rms=0.002008 Jy/beam ! Combined flux in latest and established models = 0.176611 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.176611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071659Jy sigma=0.610808 ! Fit after self-cal, rms=0.071628Jy sigma=0.610480 ! Inverting map ! Added new window around map position (-1.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021967 Jy ! Component: 100 - total flux cleaned = 0.0353564 Jy ! Total flux subtracted in 100 components = 0.0353564 Jy ! Clean residual min=-0.005686 max=0.009995 Jy/beam ! Clean residual mean=0.000000 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.211967 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.211967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062098Jy sigma=0.522789 ! Fit after self-cal, rms=0.061633Jy sigma=0.518826 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105462 Jy ! Component: 100 - total flux cleaned = 0.0174241 Jy ! Total flux subtracted in 100 components = 0.0174241 Jy ! Clean residual min=-0.004889 max=0.006649 Jy/beam ! Clean residual mean=0.000002 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.229391 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.229391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059090Jy sigma=0.494781 ! Fit after self-cal, rms=0.058973Jy sigma=0.493750 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9121 mas, bmaj=1.615 mas, bpa=-5.053 degrees ! Estimated noise=0.59592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755159 Jy ! Component: 100 - total flux cleaned = 0.0121363 Jy ! Component: 150 - total flux cleaned = 0.0152296 Jy ! Component: 200 - total flux cleaned = 0.0174616 Jy ! Total flux subtracted in 200 components = 0.0174616 Jy ! Clean residual min=-0.004095 max=0.005055 Jy/beam ! Clean residual mean=0.000003 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.246853 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 0.246853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057935Jy sigma=0.483751 ! Fit after self-cal, rms=0.057875Jy sigma=0.483160 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9121 x 1.615 at -5.053 degrees (North through East) ! Clean map min=-0.0039685 max=0.18047 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 KP 1.06 LA 1.02 ! MK 1.07 NL 1.17 OV 0.93 PT 0.91 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 1.06 LA 0.98 ! MK 1.06 NL 1.14 OV 0.93 PT 0.90 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.01 HN 0.99 KP 1.15 ! LA 0.99 MK 1.00 NL 1.16 PT 0.91 ! SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 KP 1.08 LA 1.01 ! MK 1.09 NL 1.16 OV 0.94 PT 0.89 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 1.03 LA 0.99 ! MK 1.03 NL 1.13 OV 0.93 PT 0.92 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.99 KP 1.09 ! LA 1.04 MK 1.02 NL 1.15 PT 0.89 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 KP 1.10 LA 1.01 ! MK 1.02 NL 1.15 OV 0.92 PT 0.95 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.05 LA 1.01 ! MK 1.01 NL 1.10 OV 0.93 PT 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.05 HN 1.03 KP 1.11 ! LA 0.99 MK 0.97 NL 1.20 PT 0.93 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 KP 1.09 LA 1.06 ! MK 1.04 NL 1.17 OV 0.95 PT 0.89 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 1.00 LA 0.99 ! MK 1.04 NL 1.16 OV 0.92 PT 0.94 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.07 HN 1.03 KP 1.08 ! LA 0.98 MK 1.01 NL 1.13 PT 0.93 ! SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 1.08 LA 1.00 ! MK 1.02 NL 1.12 OV 0.94 PT 0.88 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 HN 1.08 LA 0.98 ! MK 1.01 NL 1.07 OV 0.93 PT 0.92 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.02 HN 1.03 KP 1.11 ! LA 0.98 MK 0.99 NL 1.07 PT 0.94 ! SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 KP 1.10 LA 1.00 ! MK 1.07 NL 1.12 OV 0.92 PT 0.90 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.02 HN 1.02 LA 1.01 ! MK 1.02 NL 1.09 OV 0.92 PT 0.91 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.04 HN 1.01 KP 1.13 ! LA 0.99 MK 0.94 NL 1.12 PT 0.93 ! SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 KP 1.08 LA 1.02 ! MK 1.03 NL 1.17 OV 0.89 PT 0.89 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.03 LA 0.97 ! MK 0.98 NL 1.13 OV 0.92 PT 0.91 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.98 HN 1.02 KP 1.12 ! LA 0.99 MK 0.96 NL 1.11 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 KP 1.07 LA 1.02 ! MK 1.06 NL 1.10 OV 0.89 PT 0.90 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 HN 1.01 LA 0.98 ! MK 1.11 NL 1.07 OV 0.92 PT 0.88 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.00 HN 1.02 KP 1.11 ! LA 0.97 MK 0.96 NL 1.12 PT 0.90 ! SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 KP 1.06 LA 1.00 ! MK 1.08 NL 1.10 OV 0.89 PT 0.90 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 1.03 LA 0.98 ! MK 1.02 NL 1.07 OV 0.93 PT 0.94 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.02 HN 0.97 KP 1.05 ! LA 1.01 MK 0.94 NL 1.09 PT 0.91 ! SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 KP 1.06 LA 1.01 ! MK 0.99 NL 1.10 OV 0.93 PT 0.89 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.04 HN 1.01 LA 0.97 ! MK 0.96 NL 1.11 OV 0.93 PT 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.00 HN 0.97 KP 1.03 ! LA 1.02 MK 0.93 NL 1.10 PT 0.92 ! SC 1.06 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 KP 1.04 LA 1.02 ! MK 1.02 NL 1.12 OV 0.93 PT 0.91 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.94 HN 1.06 LA 0.96 ! MK 1.00 NL 1.04 OV 0.94 PT 0.87 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.98 HN 0.97 KP 1.09 ! LA 0.98 MK 0.94 NL 1.11 PT 0.91 ! SC 1.07 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 KP 1.07 LA 1.02 ! MK 1.05 NL 1.11 OV 0.92 PT 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 1.03 LA 1.01 ! MK 1.00 NL 1.07 OV 0.92 PT 0.88 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 0.99 KP 1.06 ! LA 1.02 MK 0.94 NL 1.11 PT 0.92 ! SC 1.08 ! ! ! Fit before self-cal, rms=0.057875Jy sigma=0.483160 ! Fit after self-cal, rms=0.054783Jy sigma=0.457015 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.914 mas, bmaj=1.603 mas, bpa=-4.679 degrees ! Estimated noise=0.596923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018453 Jy ! Component: 100 - total flux cleaned = -0.00227815 Jy ! Component: 150 - total flux cleaned = -0.00264512 Jy ! Component: 200 - total flux cleaned = -0.00277662 Jy ! Total flux subtracted in 200 components = -0.00277662 Jy ! Clean residual min=-0.001590 max=0.001606 Jy/beam ! Clean residual mean=0.000000 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.244076 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.244076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054674Jy sigma=0.456052 ! Fit after self-cal, rms=0.054687Jy sigma=0.455837 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054687Jy sigma=0.455837 ! Fit after self-cal, rms=0.054625Jy sigma=0.455662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9137 mas, bmaj=1.603 mas, bpa=-4.716 degrees ! Estimated noise=0.596345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000999097 Jy ! Component: 100 - total flux cleaned = -0.00135942 Jy ! Component: 150 - total flux cleaned = -0.00163384 Jy ! Component: 200 - total flux cleaned = -0.0017577 Jy ! Total flux subtracted in 200 components = -0.0017577 Jy ! Clean residual min=-0.001467 max=0.001587 Jy/beam ! Clean residual mean=0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.242318 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.242318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054575Jy sigma=0.455210 ! Fit after self-cal, rms=0.054569Jy sigma=0.455140 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -45.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766053 Jy ! Component: 100 - total flux cleaned = 0.000801517 Jy ! Component: 150 - total flux cleaned = 0.00079905 Jy ! Component: 200 - total flux cleaned = 0.000797052 Jy ! Total flux subtracted in 200 components = 0.000797052 Jy ! Clean residual min=-0.001364 max=0.001290 Jy/beam ! Clean residual mean=0.000000 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.243115 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.243115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054517Jy sigma=0.454718 ! Fit after self-cal, rms=0.054515Jy sigma=0.454695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054515Jy sigma=0.454695 ! Fit after self-cal, rms=0.054468Jy sigma=0.454605 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9133 mas, bmaj=1.603 mas, bpa=-4.728 degrees ! Estimated noise=0.595822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000607458 Jy ! Component: 100 - total flux cleaned = -0.00072145 Jy ! Component: 150 - total flux cleaned = -0.000769344 Jy ! Component: 200 - total flux cleaned = -0.000836021 Jy ! Total flux subtracted in 200 components = -0.000836021 Jy ! Clean residual min=-0.001330 max=0.001235 Jy/beam ! Clean residual mean=0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.242279 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 66 components and 0.242279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054442Jy sigma=0.454369 ! Fit after self-cal, rms=0.054441Jy sigma=0.454346 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102551 Jy ! Component: 100 - total flux cleaned = -0.000168558 Jy ! Component: 150 - total flux cleaned = -0.000148879 Jy ! Component: 200 - total flux cleaned = -0.000168601 Jy ! Total flux subtracted in 200 components = -0.000168601 Jy ! Clean residual min=-0.001296 max=0.001227 Jy/beam ! Clean residual mean=0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.242111 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.242111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054425Jy sigma=0.454206 ! Fit after self-cal, rms=0.054424Jy sigma=0.454190 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054424Jy sigma=0.454190 ! Fit after self-cal, rms=0.054391Jy sigma=0.454158 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.185 mas, bmaj=2.623 mas, bpa=3.666 degrees ! Estimated noise=0.744812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107727 Jy ! Component: 100 - total flux cleaned = 0.000121955 Jy ! Component: 150 - total flux cleaned = 0.000134327 Jy ! Component: 200 - total flux cleaned = 0.000133516 Jy ! Total flux subtracted in 200 components = 0.000133516 Jy ! Clean residual min=-0.001391 max=0.001170 Jy/beam ! Clean residual mean=0.000001 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.242244 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.242244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054385Jy sigma=0.454102 ! Fit after self-cal, rms=0.054385Jy sigma=0.454098 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.33041e-05 Jy ! Component: 100 - total flux cleaned = -1.40221e-05 Jy ! Component: 150 - total flux cleaned = -1.4389e-05 Jy ! Component: 200 - total flux cleaned = -2.2539e-05 Jy ! Total flux subtracted in 200 components = -2.2539e-05 Jy ! Clean residual min=-0.001361 max=0.001183 Jy/beam ! Clean residual mean=0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.242222 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.242222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054382Jy sigma=0.454075 ! Fit after self-cal, rms=0.054381Jy sigma=0.454070 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9132 mas, bmaj=1.603 mas, bpa=-4.711 degrees ! Estimated noise=0.595424 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9132 x 1.603 at -4.711 degrees (North through East) ! Clean map min=-0.0011425 max=0.17997 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7085 mas, bmaj=1.312 mas, bpa=-5.75 degrees ! Estimated noise=1.13568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140194 Jy ! Component: 100 - total flux cleaned = 0.178494 Jy ! Component: 150 - total flux cleaned = 0.199148 Jy ! Component: 200 - total flux cleaned = 0.211965 Jy ! Total flux subtracted in 200 components = 0.211965 Jy ! Clean residual min=-0.003082 max=0.006806 Jy/beam ! Clean residual mean=-0.000003 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.211965 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.211965 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9132 mas, bmaj=1.603 mas, bpa=-4.711 degrees ! Estimated noise=0.595424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112767 Jy ! Component: 100 - total flux cleaned = 0.0174586 Jy ! Component: 150 - total flux cleaned = 0.0211759 Jy ! Component: 200 - total flux cleaned = 0.023541 Jy ! Total flux subtracted in 200 components = 0.023541 Jy ! Clean residual min=-0.001255 max=0.001512 Jy/beam ! Clean residual mean=-0.000000 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.235506 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 34 components and 0.235506 Jy ! Inverting map ! Added new window around map position (-26.4, 24.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137672 Jy ! Component: 100 - total flux cleaned = 0.00232722 Jy ! Component: 150 - total flux cleaned = 0.00313127 Jy ! Component: 200 - total flux cleaned = 0.00379586 Jy ! Total flux subtracted in 200 components = 0.00379586 Jy ! Clean residual min=-0.001181 max=0.001357 Jy/beam ! Clean residual mean=-0.000000 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.239302 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 0.239302 Jy ! Inverting map ! Added new window around map position (6.2, -46.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011562 Jy ! Component: 100 - total flux cleaned = 0.00171572 Jy ! Component: 150 - total flux cleaned = 0.00205209 Jy ! Component: 200 - total flux cleaned = 0.00225996 Jy ! Total flux subtracted in 200 components = 0.00225996 Jy ! Clean residual min=-0.001174 max=0.001099 Jy/beam ! Clean residual mean=-0.000001 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.241562 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 70 components and 0.241562 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.185 mas, bmaj=2.623 mas, bpa=3.666 degrees ! Estimated noise=0.744812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00081389 Jy ! Component: 100 - total flux cleaned = 0.00116423 Jy ! Component: 150 - total flux cleaned = 0.00142074 Jy ! Component: 200 - total flux cleaned = 0.00153965 Jy ! Total flux subtracted in 200 components = 0.00153965 Jy ! Clean residual min=-0.001174 max=0.000987 Jy/beam ! Clean residual mean=-0.000001 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.243101 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.08576e-05 Jy ! Component: 100 - total flux cleaned = 0.000116735 Jy ! Component: 150 - total flux cleaned = 0.000180715 Jy ! Component: 200 - total flux cleaned = 0.000250715 Jy ! Total flux subtracted in 200 components = 0.000250715 Jy ! Clean residual min=-0.001183 max=0.000981 Jy/beam ! Clean residual mean=-0.000001 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.243352 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 0.243352 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9132 mas, bmaj=1.603 mas, bpa=-4.711 degrees ! Estimated noise=0.595424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.85012e-05 Jy ! Component: 100 - total flux cleaned = 8.0821e-05 Jy ! Component: 150 - total flux cleaned = 0.000100341 Jy ! Component: 200 - total flux cleaned = 8.18592e-05 Jy ! Total flux subtracted in 200 components = 8.18592e-05 Jy ! Clean residual min=-0.001191 max=0.001155 Jy/beam ! Clean residual mean=-0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.243434 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 0.243434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054327Jy sigma=0.453518 ! Fit after self-cal, rms=0.054320Jy sigma=0.453450 wmodel J1130+3031_X_map.mod ! Writing 107 model components to file: J1130+3031_X_map.mod wobs J1130+3031_X_uvs.fits ! Writing UV FITS file: J1130+3031_X_uvs.fits wwins J1130+3031_X_map.win ! wwins: Wrote 5 windows to J1130+3031_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250303 Jy ! Component: 100 - total flux cleaned = -0.000403336 Jy ! Component: 150 - total flux cleaned = -0.000620795 Jy ! Component: 200 - total flux cleaned = -0.000813283 Jy ! Component: 250 - total flux cleaned = -0.00101759 Jy ! Component: 300 - total flux cleaned = -0.00121721 Jy ! Component: 350 - total flux cleaned = -0.00144444 Jy ! Component: 400 - total flux cleaned = -0.00153964 Jy ! Component: 450 - total flux cleaned = -0.00169564 Jy ! Component: 500 - total flux cleaned = -0.00184858 Jy ! Component: 550 - total flux cleaned = -0.00199873 Jy ! Component: 600 - total flux cleaned = -0.00213163 Jy ! Component: 650 - total flux cleaned = -0.00227721 Jy ! Component: 700 - total flux cleaned = -0.00240632 Jy ! Component: 750 - total flux cleaned = -0.0025616 Jy ! Component: 800 - total flux cleaned = -0.00265867 Jy ! Component: 850 - total flux cleaned = -0.00274131 Jy ! Component: 900 - total flux cleaned = -0.00287689 Jy ! Component: 950 - total flux cleaned = -0.00301056 Jy ! Component: 1000 - total flux cleaned = -0.00312937 Jy ! Component: 1050 - total flux cleaned = -0.00322088 Jy ! Component: 1100 - total flux cleaned = -0.00332417 Jy ! Component: 1150 - total flux cleaned = -0.00342597 Jy ! Component: 1200 - total flux cleaned = -0.00350161 Jy ! Component: 1250 - total flux cleaned = -0.00361386 Jy ! Component: 1300 - total flux cleaned = -0.00368814 Jy ! Component: 1350 - total flux cleaned = -0.00381018 Jy ! Component: 1400 - total flux cleaned = -0.0039068 Jy ! Component: 1450 - total flux cleaned = -0.00397852 Jy ! Component: 1500 - total flux cleaned = -0.00406149 Jy ! Component: 1550 - total flux cleaned = -0.00414366 Jy ! Component: 1600 - total flux cleaned = -0.00420173 Jy ! Component: 1650 - total flux cleaned = -0.00431698 Jy ! Component: 1700 - total flux cleaned = -0.00431697 Jy ! Component: 1750 - total flux cleaned = -0.00439612 Jy ! Component: 1800 - total flux cleaned = -0.00444103 Jy ! Component: 1850 - total flux cleaned = -0.00449663 Jy ! Component: 1900 - total flux cleaned = -0.00450754 Jy ! Component: 1950 - total flux cleaned = -0.00456226 Jy ! Component: 2000 - total flux cleaned = -0.00458395 Jy ! Component: 2050 - total flux cleaned = -0.00463785 Jy ! Component: 2100 - total flux cleaned = -0.00464861 Jy ! Component: 2150 - total flux cleaned = -0.0047229 Jy ! Component: 2200 - total flux cleaned = -0.00483872 Jy ! Component: 2250 - total flux cleaned = -0.00484905 Jy ! Component: 2300 - total flux cleaned = -0.00492175 Jy ! Component: 2350 - total flux cleaned = -0.00496298 Jy ! Component: 2400 - total flux cleaned = -0.00502425 Jy ! Component: 2450 - total flux cleaned = -0.00508522 Jy ! Component: 2500 - total flux cleaned = -0.00512538 Jy ! Component: 2550 - total flux cleaned = -0.0051754 Jy ! Component: 2600 - total flux cleaned = -0.00522519 Jy ! Component: 2650 - total flux cleaned = -0.00531398 Jy ! Component: 2700 - total flux cleaned = -0.00533354 Jy ! Component: 2750 - total flux cleaned = -0.00539187 Jy ! Component: 2800 - total flux cleaned = -0.00544014 Jy ! Component: 2850 - total flux cleaned = -0.00547846 Jy ! Component: 2900 - total flux cleaned = -0.00553558 Jy ! Component: 2950 - total flux cleaned = -0.0055545 Jy ! Component: 3000 - total flux cleaned = -0.00560153 Jy ! Component: 3050 - total flux cleaned = -0.00569503 Jy ! Component: 3100 - total flux cleaned = -0.00573203 Jy ! Component: 3150 - total flux cleaned = -0.00574133 Jy ! Component: 3200 - total flux cleaned = -0.00580555 Jy ! Component: 3250 - total flux cleaned = -0.00583294 Jy ! Component: 3300 - total flux cleaned = -0.00587815 Jy ! Component: 3350 - total flux cleaned = -0.00591417 Jy ! Component: 3400 - total flux cleaned = -0.00593206 Jy ! Component: 3450 - total flux cleaned = -0.00601216 Jy ! Component: 3500 - total flux cleaned = -0.00602097 Jy ! Component: 3550 - total flux cleaned = -0.0060562 Jy ! Component: 3600 - total flux cleaned = -0.00606494 Jy ! Component: 3650 - total flux cleaned = -0.00610852 Jy ! Component: 3700 - total flux cleaned = -0.00614322 Jy ! Component: 3750 - total flux cleaned = -0.0061518 Jy ! Component: 3800 - total flux cleaned = -0.00615193 Jy ! Component: 3850 - total flux cleaned = -0.00621173 Jy ! Component: 3900 - total flux cleaned = -0.00625412 Jy ! Component: 3950 - total flux cleaned = -0.00627945 Jy ! Component: 4000 - total flux cleaned = -0.00629629 Jy ! Component: 4050 - total flux cleaned = -0.00631295 Jy ! Total flux subtracted in 4096 components = -0.00632954 Jy ! Clean residual min=-0.000607 max=0.000481 Jy/beam ! Clean residual mean=-0.000000 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.237105 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 418 components and 0.237104 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1130+3031_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9132 x 1.603 at -4.711 degrees (North through East) ! Clean map min=-0.0008563 max=0.18023 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1130+3031_X_map.fits wmodel /image_prod/ug002_uva//J1130+3031_X_map.mod ! Writing 418 model components to file: /image_prod/ug002_uva//J1130+3031_X_map.mod wobs /image_prod/ug002_uva//J1130+3031_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1130+3031_X_uvs.fits wwins /image_prod/ug002_uva//J1130+3031_X_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1130+3031_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.180229 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000140917 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234564 0.234564 0.469129 0.938258 1.87652 3.75303 7.50606 15.0121 30.0242 60.0485 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.18 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1278.97 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1130+3031_X_dfm.log closed on Thu Mar 5 00:05:50 2020