! Started logfile: /image_prod/ug002_uva//J1127-1857_S_e_dfm.log on Thu Mar  5 00:03:30 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1127-1857_S_e_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1127-1857_S_e_uva.fits
! AN table 1: 8 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.899306 visibilities/baseline/integration-bin.
! Found source: J1127-1857
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 777 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1127-1857_S_e]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.295668Jy  sigma=12.292662
! Fit after  self-cal, rms=0.323406Jy  sigma=3.591307
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.9 mas, bmaj=11.16 mas, bpa=0.3659 degrees
! Estimated noise=3.07121 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.605431 Jy
! Component: 100  -  total flux cleaned = 0.737482 Jy
! Total flux subtracted in 100 components = 0.737482 Jy
! Clean residual min=-0.076216 max=0.123192 Jy/beam
! Clean residual mean=0.000036 rms=0.025534 Jy/beam
! Combined flux in latest and established models = 0.737482 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.737482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.271890Jy  sigma=2.723998
! Fit after  self-cal, rms=0.271891Jy  sigma=2.723973
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.488 mas, bmaj=12.18 mas, bpa=-1.026 degrees
! Estimated noise=2.76385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.049251 Jy
! Component: 100  -  total flux cleaned = 0.0455976 Jy
! Component: 150  -  total flux cleaned = 0.0422577 Jy
! Component: 200  -  total flux cleaned = 0.0382693 Jy
! Total flux subtracted in 200 components = 0.0382693 Jy
! Clean residual min=-0.075151 max=0.111856 Jy/beam
! Clean residual mean=0.000084 rms=0.023222 Jy/beam
! Combined flux in latest and established models = 0.775751 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 11 components and 0.775751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.255563Jy  sigma=2.636410
! Fit after  self-cal, rms=0.255548Jy  sigma=2.636344
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.488 x 12.18 at -1.026 degrees (North through East)
! Clean map  min=-0.074117  max=0.74113 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.74     HN        1.02     KP        1.00     
!   LA        1.01     NL        1.00     OV        0.61     PT        1.00     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.78     HN        1.01     KP        0.95     
!   LA        0.98     NL        0.95     OV        0.93     PT        0.96     
!   SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.87     HN        1.01     KP        0.98     
!   LA        1.00     NL        0.89     OV        0.61     PT        0.99     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.255548Jy  sigma=2.636344
! Fit after  self-cal, rms=0.088093Jy  sigma=0.747938
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.384 mas, bmaj=12.09 mas, bpa=-0.2325 degrees
! Estimated noise=2.74544 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00546837 Jy
! Component: 100  -  total flux cleaned = 0.00634614 Jy
! Component: 150  -  total flux cleaned = 0.00637202 Jy
! Component: 200  -  total flux cleaned = 0.0061824 Jy
! Total flux subtracted in 200 components = 0.0061824 Jy
! Clean residual min=-0.012017 max=0.007195 Jy/beam
! Clean residual mean=0.000018 rms=0.002614 Jy/beam
! Combined flux in latest and established models = 0.781934 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 37 components and 0.781934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086040Jy  sigma=0.734666
! Fit after  self-cal, rms=0.086443Jy  sigma=0.731559
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086443Jy  sigma=0.731559
! Fit after  self-cal, rms=0.086289Jy  sigma=0.728733
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.376 mas, bmaj=12.06 mas, bpa=-0.2809 degrees
! Estimated noise=2.73731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222589 Jy
! Component: 100  -  total flux cleaned = 0.00258546 Jy
! Component: 150  -  total flux cleaned = 0.00258609 Jy
! Component: 200  -  total flux cleaned = 0.00243852 Jy
! Total flux subtracted in 200 components = 0.00243852 Jy
! Clean residual min=-0.010194 max=0.006501 Jy/beam
! Clean residual mean=0.000022 rms=0.002299 Jy/beam
! Combined flux in latest and established models = 0.784372 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 50 components and 0.784372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085245Jy  sigma=0.723037
! Fit after  self-cal, rms=0.085222Jy  sigma=0.723014
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162392 Jy
! Component: 100  -  total flux cleaned = -0.000435314 Jy
! Component: 150  -  total flux cleaned = -0.000565875 Jy
! Component: 200  -  total flux cleaned = -0.000689785 Jy
! Total flux subtracted in 200 components = -0.000689785 Jy
! Clean residual min=-0.009439 max=0.006473 Jy/beam
! Clean residual mean=0.000024 rms=0.002197 Jy/beam
! Combined flux in latest and established models = 0.783682 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.783682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084698Jy  sigma=0.720262
! Fit after  self-cal, rms=0.084677Jy  sigma=0.720243
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084677Jy  sigma=0.720243
! Fit after  self-cal, rms=0.084783Jy  sigma=0.718883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.372 mas, bmaj=12.05 mas, bpa=-0.3146 degrees
! Estimated noise=2.73261 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000526274 Jy
! Component: 100  -  total flux cleaned = 0.000915167 Jy
! Component: 150  -  total flux cleaned = 0.000916383 Jy
! Component: 200  -  total flux cleaned = 0.000806056 Jy
! Total flux subtracted in 200 components = 0.000806056 Jy
! Clean residual min=-0.008455 max=0.006056 Jy/beam
! Clean residual mean=0.000027 rms=0.002051 Jy/beam
! Combined flux in latest and established models = 0.784488 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 61 components and 0.784488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084264Jy  sigma=0.716385
! Fit after  self-cal, rms=0.084249Jy  sigma=0.716371
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000220558 Jy
! Component: 100  -  total flux cleaned = -0.000313781 Jy
! Component: 150  -  total flux cleaned = -0.000499489 Jy
! Component: 200  -  total flux cleaned = -0.000587818 Jy
! Total flux subtracted in 200 components = -0.000587818 Jy
! Clean residual min=-0.007943 max=0.006012 Jy/beam
! Clean residual mean=0.000029 rms=0.001998 Jy/beam
! Combined flux in latest and established models = 0.783901 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 61 components and 0.783901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083954Jy  sigma=0.715072
! Fit after  self-cal, rms=0.083942Jy  sigma=0.715062
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083942Jy  sigma=0.715062
! Fit after  self-cal, rms=0.084079Jy  sigma=0.714464
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.641 mas, bmaj=15.97 mas, bpa=-10.49 degrees
! Estimated noise=3.2815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000482602 Jy
! Component: 100  -  total flux cleaned = 0.000660972 Jy
! Component: 150  -  total flux cleaned = 0.000505233 Jy
! Component: 200  -  total flux cleaned = 0.000359375 Jy
! Total flux subtracted in 200 components = 0.000359375 Jy
! Clean residual min=-0.006900 max=0.006613 Jy/beam
! Clean residual mean=0.000054 rms=0.002140 Jy/beam
! Combined flux in latest and established models = 0.78426 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 85 components and 0.78426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083823Jy  sigma=0.713859
! Fit after  self-cal, rms=0.083773Jy  sigma=0.713710
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000347206 Jy
! Component: 100  -  total flux cleaned = -0.000269334 Jy
! Component: 150  -  total flux cleaned = -0.000329739 Jy
! Component: 200  -  total flux cleaned = -0.000389334 Jy
! Total flux subtracted in 200 components = -0.000389334 Jy
! Clean residual min=-0.006722 max=0.006587 Jy/beam
! Clean residual mean=0.000056 rms=0.002096 Jy/beam
! Combined flux in latest and established models = 0.783871 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 99 components and 0.783871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083636Jy  sigma=0.713141
! Fit after  self-cal, rms=0.083586Jy  sigma=0.712959
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.369 mas, bmaj=12.03 mas, bpa=-0.3364 degrees
! Estimated noise=2.72963 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.369 x 12.03 at -0.3364 degrees (North through East)
! Clean map  min=-0.0086939  max=0.75335 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083586Jy  sigma=0.712959
! Fit after  self-cal, rms=0.078551Jy  sigma=0.664272
! Inverting map and beam 
! Estimated beam: bmin=4.369 mas, bmaj=12.03 mas, bpa=-0.3597 degrees
! Estimated noise=2.72905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014148 Jy
! Component: 100  -  total flux cleaned = 0.000218687 Jy
! Component: 150  -  total flux cleaned = 0.00028933 Jy
! Component: 200  -  total flux cleaned = 0.00035469 Jy
! Total flux subtracted in 200 components = 0.00035469 Jy
! Clean residual min=-0.006891 max=0.005716 Jy/beam
! Clean residual mean=0.000030 rms=0.001853 Jy/beam
! Combined flux in latest and established models = 0.784225 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 109 components and 0.784225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078386Jy  sigma=0.663264
! Fit after  self-cal, rms=0.078377Jy  sigma=0.663253
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.60975e-05 Jy
! Component: 100  -  total flux cleaned = 4.42163e-05 Jy
! Component: 150  -  total flux cleaned = 4.4827e-05 Jy
! Component: 200  -  total flux cleaned = 9.86903e-05 Jy
! Total flux subtracted in 200 components = 9.86903e-05 Jy
! Clean residual min=-0.006607 max=0.005543 Jy/beam
! Clean residual mean=0.000029 rms=0.001828 Jy/beam
! Combined flux in latest and established models = 0.784324 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 112 components and 0.784324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078265Jy  sigma=0.662674
! Fit after  self-cal, rms=0.078260Jy  sigma=0.662660
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078260Jy  sigma=0.662660
! Fit after  self-cal, rms=0.078303Jy  sigma=0.662434
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.774 mas, bmaj=11.02 mas, bpa=1.097 degrees
! Estimated noise=3.06638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.60446 Jy
! Component: 100  -  total flux cleaned = 0.736367 Jy
! Component: 150  -  total flux cleaned = 0.766915 Jy
! Component: 200  -  total flux cleaned = 0.778361 Jy
! Total flux subtracted in 200 components = 0.778361 Jy
! Clean residual min=-0.009655 max=0.009086 Jy/beam
! Clean residual mean=0.000044 rms=0.002655 Jy/beam
! Combined flux in latest and established models = 0.778361 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.778361 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.368 mas, bmaj=12.02 mas, bpa=-0.3573 degrees
! Estimated noise=2.72734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285196 Jy
! Component: 100  -  total flux cleaned = 0.00417146 Jy
! Component: 150  -  total flux cleaned = 0.00462314 Jy
! Component: 200  -  total flux cleaned = 0.00485114 Jy
! Total flux subtracted in 200 components = 0.00485114 Jy
! Clean residual min=-0.006598 max=0.006361 Jy/beam
! Clean residual mean=0.000036 rms=0.001878 Jy/beam
! Combined flux in latest and established models = 0.783213 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 66 components and 0.783212 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.629 mas, bmaj=15.94 mas, bpa=-10.5 degrees
! Estimated noise=3.28182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146073 Jy
! Component: 100  -  total flux cleaned = 0.0011117 Jy
! Component: 150  -  total flux cleaned = 0.000942169 Jy
! Component: 200  -  total flux cleaned = 0.000844868 Jy
! Total flux subtracted in 200 components = 0.000844868 Jy
! Clean residual min=-0.005926 max=0.006130 Jy/beam
! Clean residual mean=0.000059 rms=0.001924 Jy/beam
! Combined flux in latest and established models = 0.784057 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.43335e-05 Jy
! Component: 100  -  total flux cleaned = -8.66065e-05 Jy
! Component: 150  -  total flux cleaned = -0.00016359 Jy
! Component: 200  -  total flux cleaned = -0.000198328 Jy
! Total flux subtracted in 200 components = -0.000198328 Jy
! Clean residual min=-0.005863 max=0.006058 Jy/beam
! Clean residual mean=0.000060 rms=0.001893 Jy/beam
! Combined flux in latest and established models = 0.783859 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.783859 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.368 mas, bmaj=12.02 mas, bpa=-0.3573 degrees
! Estimated noise=2.72734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000601795 Jy
! Component: 100  -  total flux cleaned = 0.000350923 Jy
! Component: 150  -  total flux cleaned = 0.00018876 Jy
! Component: 200  -  total flux cleaned = 9.43217e-05 Jy
! Total flux subtracted in 200 components = 9.43217e-05 Jy
! Clean residual min=-0.006451 max=0.005860 Jy/beam
! Clean residual mean=0.000033 rms=0.001750 Jy/beam
! Combined flux in latest and established models = 0.783953 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 95 components and 0.783954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077955Jy  sigma=0.661364
! Fit after  self-cal, rms=0.077950Jy  sigma=0.661267
wmodel J1127-1857_S_e_map.mod
! Writing 95 model components to file: J1127-1857_S_e_map.mod
wobs   J1127-1857_S_e_uvs.fits
! Writing UV FITS file: J1127-1857_S_e_uvs.fits
wwins  J1127-1857_S_e_map.win
! wwins: Wrote 1 windows to J1127-1857_S_e_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000844296 Jy
! Component: 100  -  total flux cleaned = -0.00136405 Jy
! Component: 150  -  total flux cleaned = -0.00155952 Jy
! Component: 200  -  total flux cleaned = -0.00165643 Jy
! Component: 250  -  total flux cleaned = -0.00166174 Jy
! Component: 300  -  total flux cleaned = -0.00191091 Jy
! Component: 350  -  total flux cleaned = -0.00214541 Jy
! Component: 400  -  total flux cleaned = -0.00207195 Jy
! Component: 450  -  total flux cleaned = -0.00221527 Jy
! Component: 500  -  total flux cleaned = -0.0024198 Jy
! Component: 550  -  total flux cleaned = -0.00261828 Jy
! Component: 600  -  total flux cleaned = -0.00287544 Jy
! Component: 650  -  total flux cleaned = -0.00287659 Jy
! Component: 700  -  total flux cleaned = -0.00305752 Jy
! Component: 750  -  total flux cleaned = -0.00329176 Jy
! Component: 800  -  total flux cleaned = -0.00346082 Jy
! Component: 850  -  total flux cleaned = -0.00340503 Jy
! Component: 900  -  total flux cleaned = -0.00346038 Jy
! Component: 950  -  total flux cleaned = -0.00367031 Jy
! Component: 1000  -  total flux cleaned = -0.00377276 Jy
! Component: 1050  -  total flux cleaned = -0.00392255 Jy
! Component: 1100  -  total flux cleaned = -0.00397192 Jy
! Component: 1150  -  total flux cleaned = -0.00406796 Jy
! Component: 1200  -  total flux cleaned = -0.00420727 Jy
! Component: 1250  -  total flux cleaned = -0.00429764 Jy
! Component: 1300  -  total flux cleaned = -0.00434286 Jy
! Component: 1350  -  total flux cleaned = -0.00447348 Jy
! Component: 1400  -  total flux cleaned = -0.00455798 Jy
! Component: 1450  -  total flux cleaned = -0.00480514 Jy
! Component: 1500  -  total flux cleaned = -0.00488521 Jy
! Component: 1550  -  total flux cleaned = -0.00492501 Jy
! Component: 1600  -  total flux cleaned = -0.00496426 Jy
! Component: 1650  -  total flux cleaned = -0.00496453 Jy
! Component: 1700  -  total flux cleaned = -0.00496512 Jy
! Component: 1750  -  total flux cleaned = -0.0050401 Jy
! Component: 1800  -  total flux cleaned = -0.00511397 Jy
! Component: 1850  -  total flux cleaned = -0.00518636 Jy
! Component: 1900  -  total flux cleaned = -0.00518681 Jy
! Component: 1950  -  total flux cleaned = -0.00522219 Jy
! Component: 2000  -  total flux cleaned = -0.00522217 Jy
! Component: 2050  -  total flux cleaned = -0.00522166 Jy
! Component: 2100  -  total flux cleaned = -0.00508697 Jy
! Component: 2150  -  total flux cleaned = -0.00502087 Jy
! Component: 2200  -  total flux cleaned = -0.00505366 Jy
! Component: 2250  -  total flux cleaned = -0.00498872 Jy
! Component: 2300  -  total flux cleaned = -0.00498891 Jy
! Component: 2350  -  total flux cleaned = -0.00489315 Jy
! Component: 2400  -  total flux cleaned = -0.00486147 Jy
! Component: 2450  -  total flux cleaned = -0.00483012 Jy
! Component: 2500  -  total flux cleaned = -0.00482998 Jy
! Component: 2550  -  total flux cleaned = -0.00476807 Jy
! Component: 2600  -  total flux cleaned = -0.0046759 Jy
! Component: 2650  -  total flux cleaned = -0.00467556 Jy
! Component: 2700  -  total flux cleaned = -0.00443362 Jy
! Component: 2750  -  total flux cleaned = -0.00443393 Jy
! Component: 2800  -  total flux cleaned = -0.00431462 Jy
! Component: 2850  -  total flux cleaned = -0.00431484 Jy
! Component: 2900  -  total flux cleaned = -0.00425589 Jy
! Component: 2950  -  total flux cleaned = -0.00419712 Jy
! Component: 3000  -  total flux cleaned = -0.00416797 Jy
! Component: 3050  -  total flux cleaned = -0.00413887 Jy
! Component: 3100  -  total flux cleaned = -0.00425453 Jy
! Component: 3150  -  total flux cleaned = -0.00422557 Jy
! Component: 3200  -  total flux cleaned = -0.00419685 Jy
! Component: 3250  -  total flux cleaned = -0.00422563 Jy
! Component: 3300  -  total flux cleaned = -0.00425428 Jy
! Component: 3350  -  total flux cleaned = -0.00431124 Jy
! Component: 3400  -  total flux cleaned = -0.00425439 Jy
! Component: 3450  -  total flux cleaned = -0.00431133 Jy
! Component: 3500  -  total flux cleaned = -0.00425478 Jy
! Component: 3550  -  total flux cleaned = -0.00428313 Jy
! Component: 3600  -  total flux cleaned = -0.0042833 Jy
! Component: 3650  -  total flux cleaned = -0.00428326 Jy
! Component: 3700  -  total flux cleaned = -0.00431158 Jy
! Component: 3750  -  total flux cleaned = -0.00431157 Jy
! Component: 3800  -  total flux cleaned = -0.00433977 Jy
! Component: 3850  -  total flux cleaned = -0.00439617 Jy
! Component: 3900  -  total flux cleaned = -0.00442436 Jy
! Component: 3950  -  total flux cleaned = -0.00439624 Jy
! Component: 4000  -  total flux cleaned = -0.0044244 Jy
! Component: 4050  -  total flux cleaned = -0.00445258 Jy
! Total flux subtracted in 4096 components = -0.00453693 Jy
! Clean residual min=-0.001604 max=0.001792 Jy/beam
! Clean residual mean=-0.000001 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.779417 Jy
keep
! Adding 260 model components to the UV plane model.
! The established model now contains 355 components and 0.779417 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1127-1857_S_e_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.368 x 12.02 at -0.3573 degrees (North through East)
! Clean map  min=-0.0039287  max=0.77005 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1127-1857_S_e_map.fits
wmodel /image_prod/ug002_uva//J1127-1857_S_e_map.mod
! Writing 355 model components to file: /image_prod/ug002_uva//J1127-1857_S_e_map.mod
wobs   /image_prod/ug002_uva//J1127-1857_S_e_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1127-1857_S_e_uvs.fits
wwins  /image_prod/ug002_uva//J1127-1857_S_e_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1127-1857_S_e_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.770052 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000519182 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.202265 0.202265 0.40453 0.809061 1.61812 3.23624 6.47248 12.945 25.8899 51.7799
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.77 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1483.2 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1127-1857_S_e_dfm.log closed on Thu Mar  5 00:03:33 2020