! Started logfile: /image_prod/ug002_uva//J1126-0555_S_dfm.log on Thu Mar  5 00:02:40 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1126-0555_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1126-0555_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.917778 visibilities/baseline/integration-bin.
! Found source: J1126-0555
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7434 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1126-0555_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.024055Jy  sigma=7.623297
! Fit after  self-cal, rms=0.837348Jy  sigma=6.288164
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.703 mas, bmaj=7.736 mas, bpa=-5.965 degrees
! Estimated noise=1.81684 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128317 Jy
! Component: 100  -  total flux cleaned = 0.158113 Jy
! Total flux subtracted in 100 components = 0.158113 Jy
! Clean residual min=-0.015988 max=0.015657 Jy/beam
! Clean residual mean=-0.000012 rms=0.003664 Jy/beam
! Combined flux in latest and established models = 0.158114 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.158114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098451Jy  sigma=0.619117
! Fit after  self-cal, rms=0.098133Jy  sigma=0.617471
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.288 mas, bmaj=8.846 mas, bpa=-6.769 degrees
! Estimated noise=1.14414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117127 Jy
! Component: 100  -  total flux cleaned = 0.0171321 Jy
! Component: 150  -  total flux cleaned = 0.0174239 Jy
! Component: 200  -  total flux cleaned = 0.0174332 Jy
! Total flux subtracted in 200 components = 0.0174332 Jy
! Clean residual min=-0.015795 max=0.014704 Jy/beam
! Clean residual mean=-0.000030 rms=0.003418 Jy/beam
! Combined flux in latest and established models = 0.175547 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 34 components and 0.175547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096447Jy  sigma=0.608950
! Fit after  self-cal, rms=0.096470Jy  sigma=0.608905
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.288 x 8.846 at -6.769 degrees (North through East)
! Clean map  min=-0.015436  max=0.16665 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.83     HN        0.94     KP        1.09     
!   LA        0.93     MK        0.94     OV        0.94     PT        0.99     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        0.93     KP        1.08     
!   LA        1.03     MK        1.00     OV        1.08     PT        0.93     
!   SC        1.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.89     HN        1.03     KP        1.31     
!   LA        1.11     MK        0.99     OV        1.06     PT        1.05     
!   SC        1.09     
! 
! 
! Fit before self-cal, rms=0.096470Jy  sigma=0.608905
! Fit after  self-cal, rms=0.100820Jy  sigma=0.581244
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.266 mas, bmaj=8.999 mas, bpa=-7.445 degrees
! Estimated noise=1.15616 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277277 Jy
! Component: 100  -  total flux cleaned = 0.00265689 Jy
! Component: 150  -  total flux cleaned = 0.00257006 Jy
! Component: 200  -  total flux cleaned = 0.00257338 Jy
! Total flux subtracted in 200 components = 0.00257338 Jy
! Clean residual min=-0.015203 max=0.011756 Jy/beam
! Clean residual mean=-0.000035 rms=0.003170 Jy/beam
! Combined flux in latest and established models = 0.17812 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 0.17812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100242Jy  sigma=0.580646
! Fit after  self-cal, rms=0.100338Jy  sigma=0.580405
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100338Jy  sigma=0.580405
! Fit after  self-cal, rms=0.113678Jy  sigma=0.489994
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.219 mas, bmaj=8.975 mas, bpa=-7.444 degrees
! Estimated noise=1.19046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00633856 Jy
! Component: 100  -  total flux cleaned = 0.00780613 Jy
! Component: 150  -  total flux cleaned = 0.00780537 Jy
! Component: 200  -  total flux cleaned = 0.00772102 Jy
! Total flux subtracted in 200 components = 0.00772102 Jy
! Clean residual min=-0.007401 max=0.008493 Jy/beam
! Clean residual mean=-0.000027 rms=0.001922 Jy/beam
! Combined flux in latest and established models = 0.185841 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 48 components and 0.185841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113070Jy  sigma=0.487598
! Fit after  self-cal, rms=0.113784Jy  sigma=0.486979
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (49, -36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00538073 Jy
! Component: 100  -  total flux cleaned = 0.00489475 Jy
! Component: 150  -  total flux cleaned = 0.00421689 Jy
! Component: 200  -  total flux cleaned = 0.00375143 Jy
! Total flux subtracted in 200 components = 0.00375143 Jy
! Clean residual min=-0.007048 max=0.007770 Jy/beam
! Clean residual mean=-0.000030 rms=0.001791 Jy/beam
! Combined flux in latest and established models = 0.189593 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 68 components and 0.189593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112820Jy  sigma=0.483026
! Fit after  self-cal, rms=0.112781Jy  sigma=0.482376
! Inverting map 
! Added new window around map position (62.5, -107.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205865 Jy
! Component: 100  -  total flux cleaned = 0.00167122 Jy
! Component: 150  -  total flux cleaned = 0.00115804 Jy
! Component: 200  -  total flux cleaned = 0.000723099 Jy
! Total flux subtracted in 200 components = 0.000723099 Jy
! Clean residual min=-0.006237 max=0.006263 Jy/beam
! Clean residual mean=-0.000030 rms=0.001635 Jy/beam
! Combined flux in latest and established models = 0.190316 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 89 components and 0.190316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111124Jy  sigma=0.478148
! Fit after  self-cal, rms=0.111115Jy  sigma=0.477500
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111115Jy  sigma=0.477500
! Fit after  self-cal, rms=0.136579Jy  sigma=0.431639
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.214 mas, bmaj=9.027 mas, bpa=-7.659 degrees
! Estimated noise=1.20121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00185229 Jy
! Component: 100  -  total flux cleaned = -0.00213137 Jy
! Component: 150  -  total flux cleaned = -0.00254522 Jy
! Component: 200  -  total flux cleaned = -0.00275092 Jy
! Total flux subtracted in 200 components = -0.00275092 Jy
! Clean residual min=-0.002379 max=0.002065 Jy/beam
! Clean residual mean=-0.000004 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.187565 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 108 components and 0.187565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136460Jy  sigma=0.430633
! Fit after  self-cal, rms=0.136880Jy  sigma=0.430296
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000654387 Jy
! Component: 100  -  total flux cleaned = -0.000654212 Jy
! Component: 150  -  total flux cleaned = -0.000529818 Jy
! Component: 200  -  total flux cleaned = -0.000491467 Jy
! Total flux subtracted in 200 components = -0.000491467 Jy
! Clean residual min=-0.002118 max=0.002006 Jy/beam
! Clean residual mean=-0.000004 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.187073 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 116 components and 0.187073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136836Jy  sigma=0.430001
! Fit after  self-cal, rms=0.136830Jy  sigma=0.429987
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136830Jy  sigma=0.429987
! Fit after  self-cal, rms=0.138711Jy  sigma=0.429754
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.827 mas, bmaj=14.72 mas, bpa=2.439 degrees
! Estimated noise=1.50807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000363725 Jy
! Component: 100  -  total flux cleaned = -0.000241774 Jy
! Component: 150  -  total flux cleaned = -0.000134621 Jy
! Component: 200  -  total flux cleaned = -0.000102997 Jy
! Total flux subtracted in 200 components = -0.000102997 Jy
! Clean residual min=-0.002259 max=0.002148 Jy/beam
! Clean residual mean=-0.000007 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.18697 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 128 components and 0.18697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138672Jy  sigma=0.429529
! Fit after  self-cal, rms=0.138673Jy  sigma=0.429503
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001185 Jy
! Component: 100  -  total flux cleaned = -9.20073e-05 Jy
! Component: 150  -  total flux cleaned = -6.66831e-05 Jy
! Component: 200  -  total flux cleaned = -4.42591e-05 Jy
! Total flux subtracted in 200 components = -4.42591e-05 Jy
! Clean residual min=-0.002213 max=0.002076 Jy/beam
! Clean residual mean=-0.000006 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.186926 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 135 components and 0.186926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138656Jy  sigma=0.429438
! Fit after  self-cal, rms=0.138650Jy  sigma=0.429428
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.216 mas, bmaj=9.013 mas, bpa=-7.595 degrees
! Estimated noise=1.20184 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.216 x 9.013 at -7.595 degrees (North through East)
! Clean map  min=-0.003034  max=0.17463 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.67 mas, bmaj=8.075 mas, bpa=-7.111 degrees
! Estimated noise=1.88572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133158 Jy
! Component: 100  -  total flux cleaned = 0.164622 Jy
! Component: 150  -  total flux cleaned = 0.17813 Jy
! Component: 200  -  total flux cleaned = 0.186174 Jy
! Total flux subtracted in 200 components = 0.186174 Jy
! Clean residual min=-0.004348 max=0.005247 Jy/beam
! Clean residual mean=-0.000008 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.186174 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.186174 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.216 mas, bmaj=9.013 mas, bpa=-7.595 degrees
! Estimated noise=1.20184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00520679 Jy
! Component: 100  -  total flux cleaned = 0.00616542 Jy
! Component: 150  -  total flux cleaned = 0.00626884 Jy
! Component: 200  -  total flux cleaned = 0.00601264 Jy
! Total flux subtracted in 200 components = 0.00601264 Jy
! Clean residual min=-0.002294 max=0.002647 Jy/beam
! Clean residual mean=-0.000007 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.192186 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 50 components and 0.192186 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.827 mas, bmaj=14.72 mas, bpa=2.439 degrees
! Estimated noise=1.50807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114114 Jy
! Component: 100  -  total flux cleaned = -0.00106792 Jy
! Component: 150  -  total flux cleaned = -0.00119012 Jy
! Component: 200  -  total flux cleaned = -0.00140755 Jy
! Total flux subtracted in 200 components = -0.00140755 Jy
! Clean residual min=-0.002791 max=0.002338 Jy/beam
! Clean residual mean=-0.000011 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.190779 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000295887 Jy
! Component: 100  -  total flux cleaned = -0.000567314 Jy
! Component: 150  -  total flux cleaned = -0.000774453 Jy
! Component: 200  -  total flux cleaned = -0.000965942 Jy
! Total flux subtracted in 200 components = -0.000965942 Jy
! Clean residual min=-0.002591 max=0.002144 Jy/beam
! Clean residual mean=-0.000009 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.189813 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 83 components and 0.189813 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.216 mas, bmaj=9.013 mas, bpa=-7.595 degrees
! Estimated noise=1.20184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000333585 Jy
! Component: 100  -  total flux cleaned = -0.000622449 Jy
! Component: 150  -  total flux cleaned = -0.000887165 Jy
! Component: 200  -  total flux cleaned = -0.00103706 Jy
! Total flux subtracted in 200 components = -0.00103706 Jy
! Clean residual min=-0.002080 max=0.002144 Jy/beam
! Clean residual mean=-0.000004 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.188776 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.188776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138805Jy  sigma=0.429788
! Fit after  self-cal, rms=0.138727Jy  sigma=0.429610
wmodel J1126-0555_S_map.mod
! Writing 102 model components to file: J1126-0555_S_map.mod
wobs   J1126-0555_S_uvs.fits
! Writing UV FITS file: J1126-0555_S_uvs.fits
wwins  J1126-0555_S_map.win
! wwins: Wrote 3 windows to J1126-0555_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287807 Jy
! Component: 100  -  total flux cleaned = 0.000358602 Jy
! Component: 150  -  total flux cleaned = 0.000125204 Jy
! Component: 200  -  total flux cleaned = -0.00019584 Jy
! Component: 250  -  total flux cleaned = -0.000351325 Jy
! Component: 300  -  total flux cleaned = -0.000502656 Jy
! Component: 350  -  total flux cleaned = -0.000619911 Jy
! Component: 400  -  total flux cleaned = -0.000677568 Jy
! Component: 450  -  total flux cleaned = -0.000762684 Jy
! Component: 500  -  total flux cleaned = -0.00090045 Jy
! Component: 550  -  total flux cleaned = -0.000900687 Jy
! Component: 600  -  total flux cleaned = -0.000980388 Jy
! Component: 650  -  total flux cleaned = -0.000980607 Jy
! Component: 700  -  total flux cleaned = -0.00092979 Jy
! Component: 750  -  total flux cleaned = -0.00092982 Jy
! Component: 800  -  total flux cleaned = -0.000806921 Jy
! Component: 850  -  total flux cleaned = -0.000807342 Jy
! Component: 900  -  total flux cleaned = -0.000783168 Jy
! Component: 950  -  total flux cleaned = -0.000759128 Jy
! Component: 1000  -  total flux cleaned = -0.000735941 Jy
! Component: 1050  -  total flux cleaned = -0.000713284 Jy
! Component: 1100  -  total flux cleaned = -0.000713094 Jy
! Component: 1150  -  total flux cleaned = -0.000668843 Jy
! Component: 1200  -  total flux cleaned = -0.000603472 Jy
! Component: 1250  -  total flux cleaned = -0.000582115 Jy
! Component: 1300  -  total flux cleaned = -0.000582324 Jy
! Component: 1350  -  total flux cleaned = -0.000561298 Jy
! Component: 1400  -  total flux cleaned = -0.000499221 Jy
! Component: 1450  -  total flux cleaned = -0.0005813 Jy
! Component: 1500  -  total flux cleaned = -0.000520386 Jy
! Component: 1550  -  total flux cleaned = -0.000460091 Jy
! Component: 1600  -  total flux cleaned = -0.000520084 Jy
! Component: 1650  -  total flux cleaned = -0.000520278 Jy
! Component: 1700  -  total flux cleaned = -0.000500894 Jy
! Component: 1750  -  total flux cleaned = -0.000481554 Jy
! Component: 1800  -  total flux cleaned = -0.000462271 Jy
! Component: 1850  -  total flux cleaned = -0.000575093 Jy
! Component: 1900  -  total flux cleaned = -0.000500247 Jy
! Component: 1950  -  total flux cleaned = -0.000574269 Jy
! Component: 2000  -  total flux cleaned = -0.000574158 Jy
! Component: 2050  -  total flux cleaned = -0.000682958 Jy
! Component: 2100  -  total flux cleaned = -0.000682795 Jy
! Component: 2150  -  total flux cleaned = -0.000736403 Jy
! Component: 2200  -  total flux cleaned = -0.000701164 Jy
! Component: 2250  -  total flux cleaned = -0.000806428 Jy
! Component: 2300  -  total flux cleaned = -0.000875818 Jy
! Component: 2350  -  total flux cleaned = -0.00089307 Jy
! Component: 2400  -  total flux cleaned = -0.000926973 Jy
! Component: 2450  -  total flux cleaned = -0.000910055 Jy
! Component: 2500  -  total flux cleaned = -0.000943692 Jy
! Component: 2550  -  total flux cleaned = -0.000960502 Jy
! Component: 2600  -  total flux cleaned = -0.000943839 Jy
! Component: 2650  -  total flux cleaned = -0.000960167 Jy
! Component: 2700  -  total flux cleaned = -0.000895253 Jy
! Component: 2750  -  total flux cleaned = -0.000927397 Jy
! Component: 2800  -  total flux cleaned = -0.000943358 Jy
! Component: 2850  -  total flux cleaned = -0.00100674 Jy
! Component: 2900  -  total flux cleaned = -0.00103806 Jy
! Component: 2950  -  total flux cleaned = -0.000991269 Jy
! Component: 3000  -  total flux cleaned = -0.000960176 Jy
! Component: 3050  -  total flux cleaned = -0.00097527 Jy
! Component: 3100  -  total flux cleaned = -0.000944639 Jy
! Component: 3150  -  total flux cleaned = -0.000959842 Jy
! Component: 3200  -  total flux cleaned = -0.000914401 Jy
! Component: 3250  -  total flux cleaned = -0.000899598 Jy
! Component: 3300  -  total flux cleaned = -0.000899543 Jy
! Component: 3350  -  total flux cleaned = -0.000840619 Jy
! Component: 3400  -  total flux cleaned = -0.000840607 Jy
! Component: 3450  -  total flux cleaned = -0.000782678 Jy
! Component: 3500  -  total flux cleaned = -0.000869068 Jy
! Component: 3550  -  total flux cleaned = -0.000783272 Jy
! Component: 3600  -  total flux cleaned = -0.000840086 Jy
! Component: 3650  -  total flux cleaned = -0.000868291 Jy
! Component: 3700  -  total flux cleaned = -0.000784311 Jy
! Component: 3750  -  total flux cleaned = -0.000853832 Jy
! Component: 3800  -  total flux cleaned = -0.000784758 Jy
! Component: 3850  -  total flux cleaned = -0.000826109 Jy
! Component: 3900  -  total flux cleaned = -0.000826319 Jy
! Component: 3950  -  total flux cleaned = -0.000812693 Jy
! Component: 4000  -  total flux cleaned = -0.000893574 Jy
! Component: 4050  -  total flux cleaned = -0.000880194 Jy
! Total flux subtracted in 4096 components = -0.000906866 Jy
! Clean residual min=-0.000786 max=0.000800 Jy/beam
! Clean residual mean=-0.000002 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.187869 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 389 components and 0.187869 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1126-0555_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.216 x 9.013 at -7.595 degrees (North through East)
! Clean map  min=-0.0022922  max=0.1741 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1126-0555_S_map.fits
wmodel /image_prod/ug002_uva//J1126-0555_S_map.mod
! Writing 389 model components to file: /image_prod/ug002_uva//J1126-0555_S_map.mod
wobs   /image_prod/ug002_uva//J1126-0555_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1126-0555_S_uvs.fits
wwins  /image_prod/ug002_uva//J1126-0555_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1126-0555_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.1741 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000247568 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.426596 0.426596 0.853193 1.70639 3.41277 6.82554 13.6511 27.3022 54.6043
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  703.24 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1126-0555_S_dfm.log closed on Thu Mar  5 00:02:44 2020