! Started logfile: /image_prod/ug002_uva//J1112+3503_S_dfm.log on Wed Mar 4 23:57:01 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1112+3503_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1112+3503_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.860247 visibilities/baseline/integration-bin. ! Found source: J1112+3503 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5226 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1112+3503_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006766Jy sigma=9.313855 ! Fit after self-cal, rms=0.924085Jy sigma=8.539486 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=5.604 mas, bpa=-10.72 degrees ! Estimated noise=1.67749 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594803 Jy ! Component: 100 - total flux cleaned = 0.0726869 Jy ! Total flux subtracted in 100 components = 0.0726869 Jy ! Clean residual min=-0.003628 max=0.004316 Jy/beam ! Clean residual mean=0.000004 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.0726869 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0726869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058187Jy sigma=0.461698 ! Fit after self-cal, rms=0.058110Jy sigma=0.461133 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.602 mas, bmaj=6.47 mas, bpa=-10.05 degrees ! Estimated noise=1.10139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455778 Jy ! Component: 100 - total flux cleaned = 0.00632218 Jy ! Component: 150 - total flux cleaned = 0.00673146 Jy ! Component: 200 - total flux cleaned = 0.00678285 Jy ! Total flux subtracted in 200 components = 0.00678285 Jy ! Clean residual min=-0.002828 max=0.002309 Jy/beam ! Clean residual mean=0.000005 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0794697 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.0794697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057724Jy sigma=0.458436 ! Fit after self-cal, rms=0.057720Jy sigma=0.458398 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.602 x 6.47 at -10.05 degrees (North through East) ! Clean map min=-0.0027869 max=0.076671 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.07 KP 1.05 ! LA 1.05 MK 0.96 NL 1.08 OV 0.79 ! PT 1.05 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.00 KP 0.98 ! LA 1.05 MK 1.00 NL 1.10 OV 0.94 ! PT 1.09 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.94 KP 1.05 ! LA 1.02 MK 1.03 NL 1.04 OV 0.80 ! PT 1.03 SC 1.04 ! ! ! Fit before self-cal, rms=0.057720Jy sigma=0.458398 ! Fit after self-cal, rms=0.056709Jy sigma=0.452182 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=6.477 mas, bpa=-10.03 degrees ! Estimated noise=1.10412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269908 Jy ! Component: 100 - total flux cleaned = 0.000288868 Jy ! Component: 150 - total flux cleaned = 0.000305168 Jy ! Component: 200 - total flux cleaned = 0.00031981 Jy ! Total flux subtracted in 200 components = 0.00031981 Jy ! Clean residual min=-0.002400 max=0.001908 Jy/beam ! Clean residual mean=0.000008 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0797895 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.0797895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056691Jy sigma=0.452100 ! Fit after self-cal, rms=0.056713Jy sigma=0.451907 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056713Jy sigma=0.451907 ! Fit after self-cal, rms=0.056439Jy sigma=0.448909 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=6.5 mas, bpa=-9.84 degrees ! Estimated noise=1.10603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.32156e-05 Jy ! Component: 100 - total flux cleaned = -6.60496e-05 Jy ! Component: 150 - total flux cleaned = -6.60798e-05 Jy ! Component: 200 - total flux cleaned = -7.6027e-05 Jy ! Total flux subtracted in 200 components = -7.6027e-05 Jy ! Clean residual min=-0.002154 max=0.001808 Jy/beam ! Clean residual mean=0.000005 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0797135 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.0797135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056433Jy sigma=0.448860 ! Fit after self-cal, rms=0.056447Jy sigma=0.448798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.26655e-07 Jy ! Component: 100 - total flux cleaned = 9.75192e-06 Jy ! Component: 150 - total flux cleaned = 1.88714e-05 Jy ! Component: 200 - total flux cleaned = 1.92515e-05 Jy ! Total flux subtracted in 200 components = 1.92515e-05 Jy ! Clean residual min=-0.002118 max=0.001809 Jy/beam ! Clean residual mean=0.000005 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0797327 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0797327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056444Jy sigma=0.448765 ! Fit after self-cal, rms=0.056443Jy sigma=0.448760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056443Jy sigma=0.448760 ! Fit after self-cal, rms=0.056554Jy sigma=0.448738 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=6.505 mas, bpa=-9.919 degrees ! Estimated noise=1.1063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105548 Jy ! Component: 100 - total flux cleaned = -0.000135278 Jy ! Component: 150 - total flux cleaned = -0.000152043 Jy ! Component: 200 - total flux cleaned = -0.000144433 Jy ! Total flux subtracted in 200 components = -0.000144433 Jy ! Clean residual min=-0.002094 max=0.001799 Jy/beam ! Clean residual mean=0.000005 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0795883 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0795883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056551Jy sigma=0.448710 ! Fit after self-cal, rms=0.056552Jy sigma=0.448706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.98982e-07 Jy ! Component: 100 - total flux cleaned = 6.97925e-06 Jy ! Component: 150 - total flux cleaned = 6.85269e-06 Jy ! Component: 200 - total flux cleaned = 1.35552e-05 Jy ! Total flux subtracted in 200 components = 1.35552e-05 Jy ! Clean residual min=-0.002079 max=0.001795 Jy/beam ! Clean residual mean=0.000005 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0796018 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0796018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056550Jy sigma=0.448688 ! Fit after self-cal, rms=0.056549Jy sigma=0.448686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056549Jy sigma=0.448686 ! Fit after self-cal, rms=0.056616Jy sigma=0.448682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.244 mas, bmaj=10.51 mas, bpa=-14.87 degrees ! Estimated noise=1.2949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214814 Jy ! Component: 100 - total flux cleaned = 0.00021364 Jy ! Component: 150 - total flux cleaned = 0.000205466 Jy ! Component: 200 - total flux cleaned = 0.00021265 Jy ! Total flux subtracted in 200 components = 0.00021265 Jy ! Clean residual min=-0.001933 max=0.002020 Jy/beam ! Clean residual mean=0.000012 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0798145 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 34 components and 0.0798145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056616Jy sigma=0.448697 ! Fit after self-cal, rms=0.056614Jy sigma=0.448686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.33516e-05 Jy ! Component: 100 - total flux cleaned = 3.13546e-05 Jy ! Component: 150 - total flux cleaned = 3.1239e-05 Jy ! Component: 200 - total flux cleaned = 3.70797e-05 Jy ! Total flux subtracted in 200 components = 3.70797e-05 Jy ! Clean residual min=-0.001929 max=0.002015 Jy/beam ! Clean residual mean=0.000012 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0798516 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0798516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056615Jy sigma=0.448694 ! Fit after self-cal, rms=0.056613Jy sigma=0.448691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=6.51 mas, bpa=-10.01 degrees ! Estimated noise=1.10675 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.623 x 6.51 at -10.01 degrees (North through East) ! Clean map min=-0.0019921 max=0.077149 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=5.646 mas, bpa=-10.56 degrees ! Estimated noise=1.6901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0598966 Jy ! Component: 100 - total flux cleaned = 0.0731516 Jy ! Component: 150 - total flux cleaned = 0.0773842 Jy ! Component: 200 - total flux cleaned = 0.078283 Jy ! Total flux subtracted in 200 components = 0.078283 Jy ! Clean residual min=-0.002940 max=0.002992 Jy/beam ! Clean residual mean=0.000002 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0782831 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0782831 Jy ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=6.51 mas, bpa=-10.01 degrees ! Estimated noise=1.10675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772164 Jy ! Component: 100 - total flux cleaned = 0.00103851 Jy ! Component: 150 - total flux cleaned = 0.00107294 Jy ! Component: 200 - total flux cleaned = 0.00112662 Jy ! Total flux subtracted in 200 components = 0.00112662 Jy ! Clean residual min=-0.002073 max=0.001848 Jy/beam ! Clean residual mean=0.000005 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0794097 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.0794097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.244 mas, bmaj=10.51 mas, bpa=-14.87 degrees ! Estimated noise=1.2949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043976 Jy ! Component: 100 - total flux cleaned = 0.000469115 Jy ! Component: 150 - total flux cleaned = 0.000480768 Jy ! Component: 200 - total flux cleaned = 0.000491005 Jy ! Total flux subtracted in 200 components = 0.000491005 Jy ! Clean residual min=-0.001922 max=0.002012 Jy/beam ! Clean residual mean=0.000012 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0799007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.1102e-08 Jy ! Component: 100 - total flux cleaned = 8.36662e-06 Jy ! Component: 150 - total flux cleaned = 8.19854e-06 Jy ! Component: 200 - total flux cleaned = 8.41329e-06 Jy ! Total flux subtracted in 200 components = 8.41329e-06 Jy ! Clean residual min=-0.001922 max=0.002010 Jy/beam ! Clean residual mean=0.000012 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0799091 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.0799091 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=6.51 mas, bpa=-10.01 degrees ! Estimated noise=1.10675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107486 Jy ! Component: 100 - total flux cleaned = -0.000144342 Jy ! Component: 150 - total flux cleaned = -0.000208051 Jy ! Component: 200 - total flux cleaned = -0.00025023 Jy ! Total flux subtracted in 200 components = -0.00025023 Jy ! Clean residual min=-0.002046 max=0.001827 Jy/beam ! Clean residual mean=0.000005 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0796589 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0796589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056618Jy sigma=0.448717 ! Fit after self-cal, rms=0.056618Jy sigma=0.448711 wmodel J1112+3503_S_map.mod ! Writing 35 model components to file: J1112+3503_S_map.mod wobs J1112+3503_S_uvs.fits ! Writing UV FITS file: J1112+3503_S_uvs.fits wwins J1112+3503_S_map.win ! wwins: Wrote 1 windows to J1112+3503_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000480088 Jy ! Component: 100 - total flux cleaned = -0.000772856 Jy ! Component: 150 - total flux cleaned = -0.000835431 Jy ! Component: 200 - total flux cleaned = -0.000983731 Jy ! Component: 250 - total flux cleaned = -0.00101231 Jy ! Component: 300 - total flux cleaned = -0.000930034 Jy ! Component: 350 - total flux cleaned = -0.000769772 Jy ! Component: 400 - total flux cleaned = -0.00069136 Jy ! Component: 450 - total flux cleaned = -0.000588956 Jy ! Component: 500 - total flux cleaned = -0.000488394 Jy ! Component: 550 - total flux cleaned = -0.000365749 Jy ! Component: 600 - total flux cleaned = -0.000293293 Jy ! Component: 650 - total flux cleaned = -0.000245596 Jy ! Component: 700 - total flux cleaned = -0.000198996 Jy ! Component: 750 - total flux cleaned = -0.000153959 Jy ! Component: 800 - total flux cleaned = -0.000154286 Jy ! Component: 850 - total flux cleaned = -0.000154434 Jy ! Component: 900 - total flux cleaned = -0.000132335 Jy ! Component: 950 - total flux cleaned = -4.68182e-05 Jy ! Component: 1000 - total flux cleaned = -2.60086e-05 Jy ! Component: 1050 - total flux cleaned = -5.4308e-06 Jy ! Component: 1100 - total flux cleaned = -8.69194e-05 Jy ! Component: 1150 - total flux cleaned = -5.41444e-06 Jy ! Component: 1200 - total flux cleaned = -4.51222e-05 Jy ! Component: 1250 - total flux cleaned = -2.51211e-05 Jy ! Component: 1300 - total flux cleaned = -4.48117e-05 Jy ! Component: 1350 - total flux cleaned = -8.37107e-05 Jy ! Component: 1400 - total flux cleaned = -8.3659e-05 Jy ! Component: 1450 - total flux cleaned = -0.000215776 Jy ! Component: 1500 - total flux cleaned = -0.000252963 Jy ! Component: 1550 - total flux cleaned = -0.000271136 Jy ! Component: 1600 - total flux cleaned = -0.000289703 Jy ! Component: 1650 - total flux cleaned = -0.00039778 Jy ! Component: 1700 - total flux cleaned = -0.000362419 Jy ! Component: 1750 - total flux cleaned = -0.000486024 Jy ! Component: 1800 - total flux cleaned = -0.000468215 Jy ! Component: 1850 - total flux cleaned = -0.000520314 Jy ! Component: 1900 - total flux cleaned = -0.00048637 Jy ! Component: 1950 - total flux cleaned = -0.000554418 Jy ! Component: 2000 - total flux cleaned = -0.00057125 Jy ! Component: 2050 - total flux cleaned = -0.000554908 Jy ! Component: 2100 - total flux cleaned = -0.000620535 Jy ! Component: 2150 - total flux cleaned = -0.000636757 Jy ! Component: 2200 - total flux cleaned = -0.000620498 Jy ! Component: 2250 - total flux cleaned = -0.00065246 Jy ! Component: 2300 - total flux cleaned = -0.000747268 Jy ! Component: 2350 - total flux cleaned = -0.000668944 Jy ! Component: 2400 - total flux cleaned = -0.000684844 Jy ! Component: 2450 - total flux cleaned = -0.000746311 Jy ! Component: 2500 - total flux cleaned = -0.000776745 Jy ! Component: 2550 - total flux cleaned = -0.000821973 Jy ! Component: 2600 - total flux cleaned = -0.000792161 Jy ! Component: 2650 - total flux cleaned = -0.000881123 Jy ! Component: 2700 - total flux cleaned = -0.000910491 Jy ! Component: 2750 - total flux cleaned = -0.00101254 Jy ! Component: 2800 - total flux cleaned = -0.000940088 Jy ! Component: 2850 - total flux cleaned = -0.00104052 Jy ! Component: 2900 - total flux cleaned = -0.00106878 Jy ! Component: 2950 - total flux cleaned = -0.00108286 Jy ! Component: 3000 - total flux cleaned = -0.00112484 Jy ! Component: 3050 - total flux cleaned = -0.00112497 Jy ! Component: 3100 - total flux cleaned = -0.00119392 Jy ! Component: 3150 - total flux cleaned = -0.00122125 Jy ! Component: 3200 - total flux cleaned = -0.00124842 Jy ! Component: 3250 - total flux cleaned = -0.0013155 Jy ! Component: 3300 - total flux cleaned = -0.00135522 Jy ! Component: 3350 - total flux cleaned = -0.00139507 Jy ! Component: 3400 - total flux cleaned = -0.00150011 Jy ! Component: 3450 - total flux cleaned = -0.00155229 Jy ! Component: 3500 - total flux cleaned = -0.00157809 Jy ! Component: 3550 - total flux cleaned = -0.0016166 Jy ! Component: 3600 - total flux cleaned = -0.00166743 Jy ! Component: 3650 - total flux cleaned = -0.00168012 Jy ! Component: 3700 - total flux cleaned = -0.00170531 Jy ! Component: 3750 - total flux cleaned = -0.00170543 Jy ! Component: 3800 - total flux cleaned = -0.0017177 Jy ! Component: 3850 - total flux cleaned = -0.00174236 Jy ! Component: 3900 - total flux cleaned = -0.00181561 Jy ! Component: 3950 - total flux cleaned = -0.00177923 Jy ! Component: 4000 - total flux cleaned = -0.00181523 Jy ! Component: 4050 - total flux cleaned = -0.00180333 Jy ! Total flux subtracted in 4096 components = -0.00182714 Jy ! Clean residual min=-0.000695 max=0.000844 Jy/beam ! Clean residual mean=0.000002 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.0778317 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 315 components and 0.0778317 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1112+3503_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.623 x 6.51 at -10.01 degrees (North through East) ! Clean map min=-0.0013674 max=0.077182 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1112+3503_S_map.fits wmodel /image_prod/ug002_uva//J1112+3503_S_map.mod ! Writing 315 model components to file: /image_prod/ug002_uva//J1112+3503_S_map.mod wobs /image_prod/ug002_uva//J1112+3503_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1112+3503_S_uvs.fits wwins /image_prod/ug002_uva//J1112+3503_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1112+3503_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0771821 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218501 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.849294 0.849294 1.69859 3.39718 6.79435 13.5887 27.1774 54.3548 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.077 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 353.234 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1112+3503_S_dfm.log closed on Wed Mar 4 23:57:04 2020