! Started logfile: /image_prod/ug002_uva//J1112+0724_X_dfm.log on Wed Mar  4 23:56:45 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1112+0724_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1112+0724_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.772963 visibilities/baseline/integration-bin.
! Found source: J1112+0724
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 25044 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1112+0724_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008382Jy  sigma=9.123291
! Fit after  self-cal, rms=0.897623Jy  sigma=8.091860
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8056 mas, bmaj=3.029 mas, bpa=-19.26 degrees
! Estimated noise=0.908626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.076842 Jy
! Component: 100  -  total flux cleaned = 0.0984855 Jy
! Total flux subtracted in 100 components = 0.0984855 Jy
! Clean residual min=-0.005096 max=0.010462 Jy/beam
! Clean residual mean=0.000004 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.0984855 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0984855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063811Jy  sigma=0.515398
! Fit after  self-cal, rms=0.063722Jy  sigma=0.514683
! Inverting map 
! Added new window around map position (1.6, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110403 Jy
! Component: 100  -  total flux cleaned = 0.0174737 Jy
! Total flux subtracted in 100 components = 0.0174737 Jy
! Clean residual min=-0.003941 max=0.006641 Jy/beam
! Clean residual mean=0.000000 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.115959 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.115959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061844Jy  sigma=0.492366
! Fit after  self-cal, rms=0.061800Jy  sigma=0.491806
! Inverting map 
! Added new window around map position (-1.8, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00552075 Jy
! Component: 100  -  total flux cleaned = 0.00901022 Jy
! Total flux subtracted in 100 components = 0.00901022 Jy
! Clean residual min=-0.003300 max=0.004135 Jy/beam
! Clean residual mean=-0.000001 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.124969 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 0.124969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061375Jy  sigma=0.486518
! Fit after  self-cal, rms=0.061373Jy  sigma=0.486390
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=3.081 mas, bpa=-17.84 degrees
! Estimated noise=0.506421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279141 Jy
! Component: 100  -  total flux cleaned = 0.00347471 Jy
! Component: 150  -  total flux cleaned = 0.00361266 Jy
! Component: 200  -  total flux cleaned = 0.00373539 Jy
! Total flux subtracted in 200 components = 0.00373539 Jy
! Clean residual min=-0.002855 max=0.003305 Jy/beam
! Clean residual mean=-0.000003 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.128705 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 45 components and 0.128705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061184Jy  sigma=0.484162
! Fit after  self-cal, rms=0.061179Jy  sigma=0.484116
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.022 x 3.081 at -17.84 degrees (North through East)
! Clean map  min=-0.002738  max=0.10156 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.91     KP        1.05     
!   LA        1.03     MK        1.02     NL        1.13     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.03     HN        0.90     KP        1.05     
!   LA        0.99     MK        1.04     NL        1.11     OV        0.90     
!   PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.95     KP        1.06     
!   LA        1.00     MK        1.01     NL        1.13     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.98     KP        1.03     
!   LA        1.01     MK        1.01     NL        1.10     OV        0.91     
!   PT        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        0.93     KP        1.08     
!   LA        1.01     MK        1.04     NL        1.08     OV        0.92     
!   PT        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.04     HN        0.95     KP        1.02     
!   LA        1.00     MK        1.03     NL        1.15     OV        0.91     
!   PT        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.93     KP        1.06     
!   LA        1.05     MK        1.07     NL        1.12     OV        0.93     
!   PT        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.91     KP        1.06     
!   LA        1.01     MK        1.05     NL        1.10     OV        0.92     
!   PT        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        0.93     KP        1.07     
!   LA        1.01     MK        1.01     NL        1.14     OV        0.92     
!   PT        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.96     KP        1.06     
!   LA        1.00     MK        1.01     NL        1.17     OV        0.91     
!   PT        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.97     KP        1.06     
!   LA        1.03     MK        0.99     NL        1.09     OV        0.91     
!   PT        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        1.01     
!   LA        1.05     MK        1.01     NL        1.12     OV        0.92     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.061179Jy  sigma=0.484116
! Fit after  self-cal, rms=0.059689Jy  sigma=0.477282
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=3.054 mas, bpa=-17.53 degrees
! Estimated noise=0.505188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00202703 Jy
! Component: 100  -  total flux cleaned = -0.00189879 Jy
! Component: 150  -  total flux cleaned = -0.0017045 Jy
! Component: 200  -  total flux cleaned = -0.00163773 Jy
! Total flux subtracted in 200 components = -0.00163773 Jy
! Clean residual min=-0.001681 max=0.001877 Jy/beam
! Clean residual mean=-0.000002 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.127067 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 63 components and 0.127067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059603Jy  sigma=0.476422
! Fit after  self-cal, rms=0.059640Jy  sigma=0.476290
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059640Jy  sigma=0.476290
! Fit after  self-cal, rms=0.059244Jy  sigma=0.473706
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=3.051 mas, bpa=-17.52 degrees
! Estimated noise=0.504921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000798002 Jy
! Component: 100  -  total flux cleaned = -0.000889742 Jy
! Component: 150  -  total flux cleaned = -0.000937095 Jy
! Component: 200  -  total flux cleaned = -0.000979035 Jy
! Total flux subtracted in 200 components = -0.000979035 Jy
! Clean residual min=-0.001358 max=0.001027 Jy/beam
! Clean residual mean=-0.000002 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.126088 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 73 components and 0.126088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059220Jy  sigma=0.473424
! Fit after  self-cal, rms=0.059233Jy  sigma=0.473384
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.32543e-05 Jy
! Component: 100  -  total flux cleaned = -6.2334e-05 Jy
! Component: 150  -  total flux cleaned = -6.25133e-05 Jy
! Component: 200  -  total flux cleaned = -9.18679e-05 Jy
! Total flux subtracted in 200 components = -9.18679e-05 Jy
! Clean residual min=-0.001305 max=0.001041 Jy/beam
! Clean residual mean=-0.000002 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.125996 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.125996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059224Jy  sigma=0.473298
! Fit after  self-cal, rms=0.059225Jy  sigma=0.473294
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059225Jy  sigma=0.473294
! Fit after  self-cal, rms=0.059733Jy  sigma=0.472819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=3.045 mas, bpa=-17.47 degrees
! Estimated noise=0.505228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000287208 Jy
! Component: 100  -  total flux cleaned = -0.000348433 Jy
! Component: 150  -  total flux cleaned = -0.00039747 Jy
! Component: 200  -  total flux cleaned = -0.000425986 Jy
! Total flux subtracted in 200 components = -0.000425986 Jy
! Clean residual min=-0.001065 max=0.001029 Jy/beam
! Clean residual mean=-0.000002 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.12557 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 83 components and 0.12557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059721Jy  sigma=0.472698
! Fit after  self-cal, rms=0.059733Jy  sigma=0.472688
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.43116e-06 Jy
! Component: 100  -  total flux cleaned = -7.16072e-05 Jy
! Component: 150  -  total flux cleaned = -0.000106553 Jy
! Component: 200  -  total flux cleaned = -0.000128728 Jy
! Total flux subtracted in 200 components = -0.000128728 Jy
! Clean residual min=-0.001027 max=0.001038 Jy/beam
! Clean residual mean=-0.000002 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.125441 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 86 components and 0.125442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059728Jy  sigma=0.472653
! Fit after  self-cal, rms=0.059728Jy  sigma=0.472651
! Inverting map 
! Added new window around map position (30.6, 46.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467945 Jy
! Component: 100  -  total flux cleaned = 0.000375419 Jy
! Component: 150  -  total flux cleaned = 0.000232633 Jy
! Component: 200  -  total flux cleaned = 9.66166e-05 Jy
! Total flux subtracted in 200 components = 9.66166e-05 Jy
! Clean residual min=-0.001093 max=0.000819 Jy/beam
! Clean residual mean=-0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.125538 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 107 components and 0.125538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059709Jy  sigma=0.472480
! Fit after  self-cal, rms=0.059708Jy  sigma=0.472471
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059708Jy  sigma=0.472471
! Fit after  self-cal, rms=0.059846Jy  sigma=0.472431
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.253 mas, bmaj=3.29 mas, bpa=-5.914 degrees
! Estimated noise=0.590086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000181746 Jy
! Component: 100  -  total flux cleaned = -0.000304354 Jy
! Component: 150  -  total flux cleaned = -0.000411824 Jy
! Component: 200  -  total flux cleaned = -0.000546272 Jy
! Total flux subtracted in 200 components = -0.000546272 Jy
! Clean residual min=-0.000836 max=0.000805 Jy/beam
! Clean residual mean=-0.000002 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.124992 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 126 components and 0.124992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059842Jy  sigma=0.472400
! Fit after  self-cal, rms=0.059846Jy  sigma=0.472396
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.63277e-05 Jy
! Component: 100  -  total flux cleaned = -0.000103 Jy
! Component: 150  -  total flux cleaned = -0.000145445 Jy
! Component: 200  -  total flux cleaned = -0.000174917 Jy
! Total flux subtracted in 200 components = -0.000174917 Jy
! Clean residual min=-0.000840 max=0.000801 Jy/beam
! Clean residual mean=-0.000002 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.124817 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 137 components and 0.124817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059845Jy  sigma=0.472384
! Fit after  self-cal, rms=0.059844Jy  sigma=0.472384
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=3.042 mas, bpa=-17.44 degrees
! Estimated noise=0.505246 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.03 x 3.042 at -17.44 degrees (North through East)
! Clean map  min=-0.0016648  max=0.10155 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8127 mas, bmaj=2.991 mas, bpa=-18.92 degrees
! Estimated noise=0.911604 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.07723 Jy
! Component: 100  -  total flux cleaned = 0.0983185 Jy
! Component: 150  -  total flux cleaned = 0.107949 Jy
! Component: 200  -  total flux cleaned = 0.113391 Jy
! Total flux subtracted in 200 components = 0.113391 Jy
! Clean residual min=-0.002582 max=0.002791 Jy/beam
! Clean residual mean=0.000001 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.113391 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.113391 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=3.042 mas, bpa=-17.44 degrees
! Estimated noise=0.505246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00387801 Jy
! Component: 100  -  total flux cleaned = 0.00613562 Jy
! Component: 150  -  total flux cleaned = 0.00757308 Jy
! Component: 200  -  total flux cleaned = 0.00842333 Jy
! Total flux subtracted in 200 components = 0.00842333 Jy
! Clean residual min=-0.001266 max=0.001243 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.121814 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 42 components and 0.121814 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.253 mas, bmaj=3.29 mas, bpa=-5.914 degrees
! Estimated noise=0.590086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000757309 Jy
! Component: 100  -  total flux cleaned = 0.00130841 Jy
! Component: 150  -  total flux cleaned = 0.00159856 Jy
! Component: 200  -  total flux cleaned = 0.00179328 Jy
! Total flux subtracted in 200 components = 0.00179328 Jy
! Clean residual min=-0.000973 max=0.001133 Jy/beam
! Clean residual mean=-0.000002 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.123607 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (42, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238585 Jy
! Component: 100  -  total flux cleaned = 0.000383623 Jy
! Component: 150  -  total flux cleaned = 0.000339487 Jy
! Component: 200  -  total flux cleaned = 0.000360006 Jy
! Total flux subtracted in 200 components = 0.000360006 Jy
! Clean residual min=-0.000851 max=0.000854 Jy/beam
! Clean residual mean=-0.000002 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.123967 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 100 components and 0.123967 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=3.042 mas, bpa=-17.44 degrees
! Estimated noise=0.505246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187541 Jy
! Component: 100  -  total flux cleaned = 0.000294225 Jy
! Component: 150  -  total flux cleaned = 0.000388094 Jy
! Component: 200  -  total flux cleaned = 0.000432018 Jy
! Total flux subtracted in 200 components = 0.000432018 Jy
! Clean residual min=-0.000938 max=0.000833 Jy/beam
! Clean residual mean=-0.000001 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.124399 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 125 components and 0.124399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059857Jy  sigma=0.472449
! Fit after  self-cal, rms=0.059843Jy  sigma=0.472401
wmodel J1112+0724_X_map.mod
! Writing 125 model components to file: J1112+0724_X_map.mod
wobs   J1112+0724_X_uvs.fits
! Writing UV FITS file: J1112+0724_X_uvs.fits
wwins  J1112+0724_X_map.win
! wwins: Wrote 5 windows to J1112+0724_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000428283 Jy
! Component: 100  -  total flux cleaned = -0.000584805 Jy
! Component: 150  -  total flux cleaned = -0.000688371 Jy
! Component: 200  -  total flux cleaned = -0.000788371 Jy
! Component: 250  -  total flux cleaned = -0.000843774 Jy
! Component: 300  -  total flux cleaned = -0.00089739 Jy
! Component: 350  -  total flux cleaned = -0.000910253 Jy
! Component: 400  -  total flux cleaned = -0.000897594 Jy
! Component: 450  -  total flux cleaned = -0.000910012 Jy
! Component: 500  -  total flux cleaned = -0.000909811 Jy
! Component: 550  -  total flux cleaned = -0.000945417 Jy
! Component: 600  -  total flux cleaned = -0.000956894 Jy
! Component: 650  -  total flux cleaned = -0.0010141 Jy
! Component: 700  -  total flux cleaned = -0.00102518 Jy
! Component: 750  -  total flux cleaned = -0.00106983 Jy
! Component: 800  -  total flux cleaned = -0.00111356 Jy
! Component: 850  -  total flux cleaned = -0.00113503 Jy
! Component: 900  -  total flux cleaned = -0.00114586 Jy
! Component: 950  -  total flux cleaned = -0.001167 Jy
! Component: 1000  -  total flux cleaned = -0.00118767 Jy
! Component: 1050  -  total flux cleaned = -0.00118783 Jy
! Component: 1100  -  total flux cleaned = -0.00123844 Jy
! Component: 1150  -  total flux cleaned = -0.00125834 Jy
! Component: 1200  -  total flux cleaned = -0.00124842 Jy
! Component: 1250  -  total flux cleaned = -0.00125809 Jy
! Component: 1300  -  total flux cleaned = -0.00127731 Jy
! Component: 1350  -  total flux cleaned = -0.00123913 Jy
! Component: 1400  -  total flux cleaned = -0.00123918 Jy
! Component: 1450  -  total flux cleaned = -0.00125792 Jy
! Component: 1500  -  total flux cleaned = -0.00124857 Jy
! Component: 1550  -  total flux cleaned = -0.00126692 Jy
! Component: 1600  -  total flux cleaned = -0.00126684 Jy
! Component: 1650  -  total flux cleaned = -0.0012848 Jy
! Component: 1700  -  total flux cleaned = -0.00123122 Jy
! Component: 1750  -  total flux cleaned = -0.00124008 Jy
! Component: 1800  -  total flux cleaned = -0.00124003 Jy
! Component: 1850  -  total flux cleaned = -0.00123134 Jy
! Component: 1900  -  total flux cleaned = -0.00122276 Jy
! Component: 1950  -  total flux cleaned = -0.00125688 Jy
! Component: 2000  -  total flux cleaned = -0.00122303 Jy
! Component: 2050  -  total flux cleaned = -0.00123144 Jy
! Component: 2100  -  total flux cleaned = -0.00118992 Jy
! Component: 2150  -  total flux cleaned = -0.00118172 Jy
! Component: 2200  -  total flux cleaned = -0.00116545 Jy
! Component: 2250  -  total flux cleaned = -0.00114918 Jy
! Component: 2300  -  total flux cleaned = -0.00118138 Jy
! Component: 2350  -  total flux cleaned = -0.00114153 Jy
! Component: 2400  -  total flux cleaned = -0.00114145 Jy
! Component: 2450  -  total flux cleaned = -0.00113354 Jy
! Component: 2500  -  total flux cleaned = -0.00111794 Jy
! Component: 2550  -  total flux cleaned = -0.001118 Jy
! Component: 2600  -  total flux cleaned = -0.00109499 Jy
! Component: 2650  -  total flux cleaned = -0.00113309 Jy
! Component: 2700  -  total flux cleaned = -0.00111789 Jy
! Component: 2750  -  total flux cleaned = -0.00108787 Jy
! Component: 2800  -  total flux cleaned = -0.00108791 Jy
! Component: 2850  -  total flux cleaned = -0.00106572 Jy
! Component: 2900  -  total flux cleaned = -0.00105832 Jy
! Component: 2950  -  total flux cleaned = -0.00105102 Jy
! Component: 3000  -  total flux cleaned = -0.00103651 Jy
! Component: 3050  -  total flux cleaned = -0.00103649 Jy
! Component: 3100  -  total flux cleaned = -0.00100071 Jy
! Component: 3150  -  total flux cleaned = -0.00101502 Jy
! Component: 3200  -  total flux cleaned = -0.0010009 Jy
! Component: 3250  -  total flux cleaned = -0.000965746 Jy
! Component: 3300  -  total flux cleaned = -0.000965754 Jy
! Component: 3350  -  total flux cleaned = -0.000944911 Jy
! Component: 3400  -  total flux cleaned = -0.000903564 Jy
! Component: 3450  -  total flux cleaned = -0.000889852 Jy
! Component: 3500  -  total flux cleaned = -0.000896674 Jy
! Component: 3550  -  total flux cleaned = -0.00086276 Jy
! Component: 3600  -  total flux cleaned = -0.000842523 Jy
! Component: 3650  -  total flux cleaned = -0.000842524 Jy
! Component: 3700  -  total flux cleaned = -0.000815917 Jy
! Component: 3750  -  total flux cleaned = -0.000809281 Jy
! Component: 3800  -  total flux cleaned = -0.000776384 Jy
! Component: 3850  -  total flux cleaned = -0.000776429 Jy
! Component: 3900  -  total flux cleaned = -0.000776485 Jy
! Component: 3950  -  total flux cleaned = -0.000757049 Jy
! Component: 4000  -  total flux cleaned = -0.00076987 Jy
! Component: 4050  -  total flux cleaned = -0.000737863 Jy
! Total flux subtracted in 4096 components = -0.00070608 Jy
! Clean residual min=-0.000414 max=0.000417 Jy/beam
! Clean residual mean=-0.000000 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.123693 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 395 components and 0.123693 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1112+0724_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.03 x 3.042 at -17.44 degrees (North through East)
! Clean map  min=-0.0010632  max=0.10191 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1112+0724_X_map.fits
wmodel /image_prod/ug002_uva//J1112+0724_X_map.mod
! Writing 395 model components to file: /image_prod/ug002_uva//J1112+0724_X_map.mod
wobs   /image_prod/ug002_uva//J1112+0724_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1112+0724_X_uvs.fits
wwins  /image_prod/ug002_uva//J1112+0724_X_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1112+0724_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.101909 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000114466 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.336965 0.336965 0.673931 1.34786 2.69572 5.39145 10.7829 21.5658 43.1316 86.2631
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.101 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  890.299 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1112+0724_X_dfm.log closed on Wed Mar  4 23:56:49 2020