! Started logfile: /image_prod/ug002_uva//J1111+1955_X_dfm.log on Wed Mar 4 23:56:22 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1111+1955_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1111+1955_X_uva.fits ! AN table 1: 90 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.865432 visibilities/baseline/integration-bin. ! Found source: J1111+1955 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 42060 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1111+1955_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011039Jy sigma=8.967425 ! Fit after self-cal, rms=0.918463Jy sigma=8.130541 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6893 mas, bmaj=1.824 mas, bpa=-6.862 degrees ! Estimated noise=0.794962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515713 Jy ! Component: 100 - total flux cleaned = 0.074987 Jy ! Total flux subtracted in 100 components = 0.074987 Jy ! Clean residual min=-0.010998 max=0.025590 Jy/beam ! Clean residual mean=-0.000010 rms=0.003120 Jy/beam ! Combined flux in latest and established models = 0.074987 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.074987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115128Jy sigma=1.000567 ! Fit after self-cal, rms=0.114240Jy sigma=0.992446 ! Inverting map ! Added new window around map position (15.8, -8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253408 Jy ! Component: 100 - total flux cleaned = 0.0422402 Jy ! Total flux subtracted in 100 components = 0.0422402 Jy ! Clean residual min=-0.010581 max=0.022162 Jy/beam ! Clean residual mean=-0.000012 rms=0.002853 Jy/beam ! Combined flux in latest and established models = 0.117227 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.117227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103612Jy sigma=0.895608 ! Fit after self-cal, rms=0.102465Jy sigma=0.885747 ! Inverting map ! Added new window around map position (1.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259291 Jy ! Component: 100 - total flux cleaned = 0.0420841 Jy ! Total flux subtracted in 100 components = 0.0420841 Jy ! Clean residual min=-0.008820 max=0.017121 Jy/beam ! Clean residual mean=-0.000011 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.159311 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 47 components and 0.159311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090667Jy sigma=0.781384 ! Fit after self-cal, rms=0.088742Jy sigma=0.763434 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185895 Jy ! Component: 100 - total flux cleaned = 0.0315801 Jy ! Total flux subtracted in 100 components = 0.0315801 Jy ! Clean residual min=-0.007069 max=0.016592 Jy/beam ! Clean residual mean=-0.000010 rms=0.001979 Jy/beam ! Combined flux in latest and established models = 0.190891 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.190891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080864Jy sigma=0.693536 ! Fit after self-cal, rms=0.080247Jy sigma=0.687431 ! Inverting map ! Added new window around map position (12.4, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157553 Jy ! Component: 100 - total flux cleaned = 0.0272002 Jy ! Total flux subtracted in 100 components = 0.0272002 Jy ! Clean residual min=-0.006155 max=0.012289 Jy/beam ! Clean residual mean=-0.000007 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.218092 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.218092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073905Jy sigma=0.630972 ! Fit after self-cal, rms=0.073731Jy sigma=0.629451 ! Inverting map ! Added new window around map position (14.2, -7.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126871 Jy ! Component: 100 - total flux cleaned = 0.0224452 Jy ! Total flux subtracted in 100 components = 0.0224452 Jy ! Clean residual min=-0.005112 max=0.006719 Jy/beam ! Clean residual mean=-0.000007 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.240537 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 85 components and 0.240537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068971Jy sigma=0.586292 ! Fit after self-cal, rms=0.068879Jy sigma=0.585479 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=2.118 mas, bpa=-6.489 degrees ! Estimated noise=0.393579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176447 Jy ! Component: 100 - total flux cleaned = 0.0314081 Jy ! Component: 150 - total flux cleaned = 0.0427432 Jy ! Component: 200 - total flux cleaned = 0.0523049 Jy ! Total flux subtracted in 200 components = 0.0523049 Jy ! Clean residual min=-0.004864 max=0.008681 Jy/beam ! Clean residual mean=-0.000019 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 0.292842 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 139 components and 0.292842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061470Jy sigma=0.519219 ! Fit after self-cal, rms=0.061338Jy sigma=0.517895 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9053 x 2.118 at -6.489 degrees (North through East) ! Clean map min=-0.0045918 max=0.068873 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.99 KP 0.94 ! LA 0.95 MK 1.03 NL 1.17 OV 0.95 ! PT 0.82 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.95 KP 0.95 ! LA 0.92 MK 1.03 NL 1.16 OV 0.97 ! PT 0.80 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 0.93 KP 0.94 ! LA 0.95 MK 1.06 NL 1.15 OV 0.95 ! PT 0.81 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.96 KP 0.95 ! LA 0.93 MK 1.06 NL 1.14 OV 0.96 ! PT 0.82 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.94 KP 0.96 ! LA 0.95 MK 1.06 NL 1.15 OV 0.95 ! PT 0.80 SC 1.07 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.93 KP 0.97 ! LA 0.93 MK 1.03 NL 1.14 OV 0.96 ! PT 0.81 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.96 KP 0.96 ! LA 0.94 MK 1.08 NL 1.15 OV 0.96 ! PT 0.83 SC 1.13 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.97 KP 0.97 ! LA 0.93 MK 1.08 NL 1.14 OV 0.98 ! PT 0.81 SC 1.11 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.90 KP 0.96 ! LA 0.94 MK 1.21 NL 1.16 OV 0.97 ! PT 0.82 SC 1.07 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.95 KP 0.98 ! LA 0.95 MK 1.19 NL 1.14 OV 0.96 ! PT 0.83 SC 1.13 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.95 KP 0.98 ! LA 0.94 MK 1.08 NL 1.15 OV 0.98 ! PT 0.83 SC 1.15 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.93 KP 0.95 ! LA 0.95 MK 1.06 NL 1.12 OV 0.98 ! PT 0.83 SC 1.13 ! ! ! Fit before self-cal, rms=0.061338Jy sigma=0.517895 ! Fit after self-cal, rms=0.055946Jy sigma=0.486165 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9385 mas, bmaj=2.172 mas, bpa=-6.597 degrees ! Estimated noise=0.374752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362939 Jy ! Component: 100 - total flux cleaned = 0.00596784 Jy ! Component: 150 - total flux cleaned = 0.00723833 Jy ! Component: 200 - total flux cleaned = 0.00822108 Jy ! Total flux subtracted in 200 components = 0.00822108 Jy ! Clean residual min=-0.003872 max=0.003833 Jy/beam ! Clean residual mean=-0.000000 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.301063 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 160 components and 0.301063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055200Jy sigma=0.478747 ! Fit after self-cal, rms=0.055205Jy sigma=0.478247 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055205Jy sigma=0.478247 ! Fit after self-cal, rms=0.059234Jy sigma=0.456693 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9383 mas, bmaj=2.135 mas, bpa=-6.698 degrees ! Estimated noise=0.383998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133811 Jy ! Component: 100 - total flux cleaned = 0.00204101 Jy ! Component: 150 - total flux cleaned = 0.00251295 Jy ! Component: 200 - total flux cleaned = 0.00298926 Jy ! Total flux subtracted in 200 components = 0.00298926 Jy ! Clean residual min=-0.001514 max=0.001727 Jy/beam ! Clean residual mean=0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.304052 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 181 components and 0.304052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059070Jy sigma=0.454901 ! Fit after self-cal, rms=0.059126Jy sigma=0.454734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33.4, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107264 Jy ! Component: 100 - total flux cleaned = 0.00154286 Jy ! Component: 150 - total flux cleaned = 0.00187044 Jy ! Component: 200 - total flux cleaned = 0.00221028 Jy ! Total flux subtracted in 200 components = 0.00221028 Jy ! Clean residual min=-0.001297 max=0.001470 Jy/beam ! Clean residual mean=0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.306262 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 196 components and 0.306262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059047Jy sigma=0.453889 ! Fit after self-cal, rms=0.059043Jy sigma=0.453856 ! Inverting map ! Added new window around map position (-9.8, 25.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128598 Jy ! Component: 100 - total flux cleaned = 0.00156324 Jy ! Component: 150 - total flux cleaned = 0.00185515 Jy ! Component: 200 - total flux cleaned = 0.0021284 Jy ! Total flux subtracted in 200 components = 0.0021284 Jy ! Clean residual min=-0.001207 max=0.001353 Jy/beam ! Clean residual mean=0.000003 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.308391 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 220 components and 0.308391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058989Jy sigma=0.453333 ! Fit after self-cal, rms=0.058987Jy sigma=0.453321 ! Inverting map ! Added new window around map position (16, 18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109727 Jy ! Component: 100 - total flux cleaned = 0.00149267 Jy ! Component: 150 - total flux cleaned = 0.001686 Jy ! Component: 200 - total flux cleaned = 0.00177449 Jy ! Total flux subtracted in 200 components = 0.00177449 Jy ! Clean residual min=-0.001124 max=0.001214 Jy/beam ! Clean residual mean=0.000002 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.310165 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 241 components and 0.310165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058939Jy sigma=0.452882 ! Fit after self-cal, rms=0.058938Jy sigma=0.452859 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058938Jy sigma=0.452859 ! Fit after self-cal, rms=0.060070Jy sigma=0.452499 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9361 mas, bmaj=2.127 mas, bpa=-6.661 degrees ! Estimated noise=0.381932 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669867 Jy ! Component: 100 - total flux cleaned = 0.000912268 Jy ! Component: 150 - total flux cleaned = 0.00110089 Jy ! Component: 200 - total flux cleaned = 0.00121735 Jy ! Total flux subtracted in 200 components = 0.00121735 Jy ! Clean residual min=-0.000991 max=0.001086 Jy/beam ! Clean residual mean=0.000000 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.311383 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 251 components and 0.311382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060037Jy sigma=0.452149 ! Fit after self-cal, rms=0.060045Jy sigma=0.452138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.6, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551366 Jy ! Component: 100 - total flux cleaned = 0.000802619 Jy ! Component: 150 - total flux cleaned = 0.0010111 Jy ! Component: 200 - total flux cleaned = 0.00113477 Jy ! Total flux subtracted in 200 components = 0.00113477 Jy ! Clean residual min=-0.000920 max=0.000971 Jy/beam ! Clean residual mean=0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.312517 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 270 components and 0.312517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060017Jy sigma=0.451871 ! Fit after self-cal, rms=0.060016Jy sigma=0.451861 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060016Jy sigma=0.451861 ! Fit after self-cal, rms=0.060147Jy sigma=0.451824 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.882 mas, bpa=-3.457 degrees ! Estimated noise=0.460462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000826085 Jy ! Component: 100 - total flux cleaned = 0.00127408 Jy ! Component: 150 - total flux cleaned = 0.00155733 Jy ! Component: 200 - total flux cleaned = 0.00170602 Jy ! Total flux subtracted in 200 components = 0.00170602 Jy ! Clean residual min=-0.000867 max=0.001037 Jy/beam ! Clean residual mean=0.000000 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.314223 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 287 components and 0.314223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060133Jy sigma=0.451671 ! Fit after self-cal, rms=0.060134Jy sigma=0.451662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206728 Jy ! Component: 100 - total flux cleaned = 0.000322063 Jy ! Component: 150 - total flux cleaned = 0.000375567 Jy ! Component: 200 - total flux cleaned = 0.000409403 Jy ! Total flux subtracted in 200 components = 0.000409403 Jy ! Clean residual min=-0.000833 max=0.000981 Jy/beam ! Clean residual mean=0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.314633 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 299 components and 0.314633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060126Jy sigma=0.451587 ! Fit after self-cal, rms=0.060125Jy sigma=0.451581 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.936 mas, bmaj=2.125 mas, bpa=-6.673 degrees ! Estimated noise=0.380984 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.936 x 2.125 at -6.673 degrees (North through East) ! Clean map min=-0.0012201 max=0.063127 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7106 mas, bmaj=1.827 mas, bpa=-7.103 degrees ! Estimated noise=0.78629 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557327 Jy ! Component: 100 - total flux cleaned = 0.0914486 Jy ! Component: 150 - total flux cleaned = 0.118234 Jy ! Component: 200 - total flux cleaned = 0.139616 Jy ! Total flux subtracted in 200 components = 0.139616 Jy ! Clean residual min=-0.007454 max=0.013172 Jy/beam ! Clean residual mean=-0.000004 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.139616 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.139616 Jy ! Inverting map and beam ! Estimated beam: bmin=0.936 mas, bmaj=2.125 mas, bpa=-6.673 degrees ! Estimated noise=0.380984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319921 Jy ! Component: 100 - total flux cleaned = 0.0557788 Jy ! Component: 150 - total flux cleaned = 0.0742877 Jy ! Component: 200 - total flux cleaned = 0.0890421 Jy ! Total flux subtracted in 200 components = 0.0890421 Jy ! Clean residual min=-0.004640 max=0.008981 Jy/beam ! Clean residual mean=-0.000016 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.228659 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 76 components and 0.228659 Jy ! Inverting map ! Added new window around map position (1, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119882 Jy ! Component: 100 - total flux cleaned = 0.0218264 Jy ! Component: 150 - total flux cleaned = 0.0300413 Jy ! Component: 200 - total flux cleaned = 0.0369618 Jy ! Total flux subtracted in 200 components = 0.0369618 Jy ! Clean residual min=-0.002860 max=0.004299 Jy/beam ! Clean residual mean=-0.000008 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.26562 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 132 components and 0.26562 Jy ! Inverting map ! Added new window around map position (13.2, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588892 Jy ! Component: 100 - total flux cleaned = 0.01093 Jy ! Component: 150 - total flux cleaned = 0.015273 Jy ! Component: 200 - total flux cleaned = 0.0190371 Jy ! Total flux subtracted in 200 components = 0.0190371 Jy ! Clean residual min=-0.001923 max=0.002508 Jy/beam ! Clean residual mean=-0.000004 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.284658 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 181 components and 0.284658 Jy ! Inverting map ! Added new window around map position (-1, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329912 Jy ! Component: 100 - total flux cleaned = 0.00618087 Jy ! Component: 150 - total flux cleaned = 0.00871226 Jy ! Component: 200 - total flux cleaned = 0.010952 Jy ! Total flux subtracted in 200 components = 0.010952 Jy ! Clean residual min=-0.001394 max=0.001669 Jy/beam ! Clean residual mean=-0.000002 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.29561 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 208 components and 0.29561 Jy ! Inverting map ! Added new window around map position (-6.8, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203076 Jy ! Component: 100 - total flux cleaned = 0.00380621 Jy ! Component: 150 - total flux cleaned = 0.00527247 Jy ! Component: 200 - total flux cleaned = 0.0066489 Jy ! Total flux subtracted in 200 components = 0.0066489 Jy ! Clean residual min=-0.001168 max=0.001146 Jy/beam ! Clean residual mean=-0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.302258 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 237 components and 0.302258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.882 mas, bpa=-3.457 degrees ! Estimated noise=0.460462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021982 Jy ! Component: 100 - total flux cleaned = 0.00388327 Jy ! Component: 150 - total flux cleaned = 0.00527143 Jy ! Component: 200 - total flux cleaned = 0.00644842 Jy ! Total flux subtracted in 200 components = 0.00644842 Jy ! Clean residual min=-0.001273 max=0.001214 Jy/beam ! Clean residual mean=-0.000001 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.308707 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00097829 Jy ! Component: 100 - total flux cleaned = 0.00159029 Jy ! Component: 150 - total flux cleaned = 0.00213983 Jy ! Component: 200 - total flux cleaned = 0.00249293 Jy ! Total flux subtracted in 200 components = 0.00249293 Jy ! Clean residual min=-0.001045 max=0.001034 Jy/beam ! Clean residual mean=-0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.3112 Jy ! Adding 107 model components to the UV plane model. ! The established model now contains 310 components and 0.3112 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.936 mas, bmaj=2.125 mas, bpa=-6.673 degrees ! Estimated noise=0.380984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.82762e-05 Jy ! Component: 100 - total flux cleaned = 0.000275131 Jy ! Component: 150 - total flux cleaned = 0.000429592 Jy ! Component: 200 - total flux cleaned = 0.00064479 Jy ! Total flux subtracted in 200 components = 0.00064479 Jy ! Clean residual min=-0.000845 max=0.000830 Jy/beam ! Clean residual mean=-0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.311845 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 333 components and 0.311845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060105Jy sigma=0.451318 ! Fit after self-cal, rms=0.060082Jy sigma=0.451210 wmodel J1111+1955_X_map.mod ! Writing 333 model components to file: J1111+1955_X_map.mod wobs J1111+1955_X_uvs.fits ! Writing UV FITS file: J1111+1955_X_uvs.fits wwins J1111+1955_X_map.win ! wwins: Wrote 14 windows to J1111+1955_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199258 Jy ! Component: 100 - total flux cleaned = -0.000353102 Jy ! Component: 150 - total flux cleaned = -0.000500011 Jy ! Component: 200 - total flux cleaned = -0.000590023 Jy ! Component: 250 - total flux cleaned = -0.000640028 Jy ! Component: 300 - total flux cleaned = -0.00063987 Jy ! Component: 350 - total flux cleaned = -0.000640072 Jy ! Component: 400 - total flux cleaned = -0.000640277 Jy ! Component: 450 - total flux cleaned = -0.000628964 Jy ! Component: 500 - total flux cleaned = -0.000640365 Jy ! Component: 550 - total flux cleaned = -0.000629442 Jy ! Component: 600 - total flux cleaned = -0.000618473 Jy ! Component: 650 - total flux cleaned = -0.000618589 Jy ! Component: 700 - total flux cleaned = -0.00060793 Jy ! Component: 750 - total flux cleaned = -0.000597208 Jy ! Component: 800 - total flux cleaned = -0.000535031 Jy ! Component: 850 - total flux cleaned = -0.000565731 Jy ! Component: 900 - total flux cleaned = -0.000515379 Jy ! Component: 950 - total flux cleaned = -0.00052538 Jy ! Component: 1000 - total flux cleaned = -0.000496006 Jy ! Component: 1050 - total flux cleaned = -0.000476607 Jy ! Component: 1100 - total flux cleaned = -0.000495818 Jy ! Component: 1150 - total flux cleaned = -0.000448296 Jy ! Component: 1200 - total flux cleaned = -0.00044852 Jy ! Component: 1250 - total flux cleaned = -0.000439264 Jy ! Component: 1300 - total flux cleaned = -0.000430126 Jy ! Component: 1350 - total flux cleaned = -0.00043919 Jy ! Component: 1400 - total flux cleaned = -0.000439395 Jy ! Component: 1450 - total flux cleaned = -0.000439379 Jy ! Component: 1500 - total flux cleaned = -0.00044817 Jy ! Component: 1550 - total flux cleaned = -0.000421878 Jy ! Component: 1600 - total flux cleaned = -0.000421909 Jy ! Component: 1650 - total flux cleaned = -0.000404838 Jy ! Component: 1700 - total flux cleaned = -0.000439149 Jy ! Component: 1750 - total flux cleaned = -0.000439149 Jy ! Component: 1800 - total flux cleaned = -0.000489576 Jy ! Component: 1850 - total flux cleaned = -0.000472907 Jy ! Component: 1900 - total flux cleaned = -0.000456323 Jy ! Component: 1950 - total flux cleaned = -0.000472709 Jy ! Component: 2000 - total flux cleaned = -0.000480822 Jy ! Component: 2050 - total flux cleaned = -0.00046453 Jy ! Component: 2100 - total flux cleaned = -0.000440613 Jy ! Component: 2150 - total flux cleaned = -0.000488194 Jy ! Component: 2200 - total flux cleaned = -0.00046459 Jy ! Component: 2250 - total flux cleaned = -0.000464629 Jy ! Component: 2300 - total flux cleaned = -0.000480164 Jy ! Component: 2350 - total flux cleaned = -0.000472414 Jy ! Component: 2400 - total flux cleaned = -0.000472495 Jy ! Component: 2450 - total flux cleaned = -0.000442113 Jy ! Component: 2500 - total flux cleaned = -0.000449553 Jy ! Component: 2550 - total flux cleaned = -0.000419638 Jy ! Component: 2600 - total flux cleaned = -0.000397316 Jy ! Component: 2650 - total flux cleaned = -0.000441502 Jy ! Component: 2700 - total flux cleaned = -0.000404801 Jy ! Component: 2750 - total flux cleaned = -0.000404892 Jy ! Component: 2800 - total flux cleaned = -0.000368765 Jy ! Component: 2850 - total flux cleaned = -0.000368816 Jy ! Component: 2900 - total flux cleaned = -0.000354594 Jy ! Component: 2950 - total flux cleaned = -0.000340379 Jy ! Component: 3000 - total flux cleaned = -0.000340452 Jy ! Component: 3050 - total flux cleaned = -0.00033352 Jy ! Component: 3100 - total flux cleaned = -0.000368262 Jy ! Component: 3150 - total flux cleaned = -0.000340541 Jy ! Component: 3200 - total flux cleaned = -0.000313071 Jy ! Component: 3250 - total flux cleaned = -0.000313137 Jy ! Component: 3300 - total flux cleaned = -0.00033338 Jy ! Component: 3350 - total flux cleaned = -0.000279578 Jy ! Component: 3400 - total flux cleaned = -0.000312989 Jy ! Component: 3450 - total flux cleaned = -0.000299619 Jy ! Component: 3500 - total flux cleaned = -0.000312822 Jy ! Component: 3550 - total flux cleaned = -0.00030624 Jy ! Component: 3600 - total flux cleaned = -0.000299697 Jy ! Component: 3650 - total flux cleaned = -0.000280235 Jy ! Component: 3700 - total flux cleaned = -0.000312403 Jy ! Component: 3750 - total flux cleaned = -0.000299597 Jy ! Component: 3800 - total flux cleaned = -0.000325102 Jy ! Component: 3850 - total flux cleaned = -0.000312414 Jy ! Component: 3900 - total flux cleaned = -0.000312391 Jy ! Component: 3950 - total flux cleaned = -0.000318711 Jy ! Component: 4000 - total flux cleaned = -0.00032496 Jy ! Component: 4050 - total flux cleaned = -0.000349729 Jy ! Total flux subtracted in 4096 components = -0.000362027 Jy ! Clean residual min=-0.000319 max=0.000352 Jy/beam ! Clean residual mean=0.000000 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.311483 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 647 components and 0.311482 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1111+1955_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.936 x 2.125 at -6.673 degrees (North through East) ! Clean map min=-0.00058912 max=0.063178 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1111+1955_X_map.fits wmodel /image_prod/ug002_uva//J1111+1955_X_map.mod ! Writing 647 model components to file: /image_prod/ug002_uva//J1111+1955_X_map.mod wobs /image_prod/ug002_uva//J1111+1955_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1111+1955_X_uvs.fits wwins /image_prod/ug002_uva//J1111+1955_X_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J1111+1955_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0631777 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000108902 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.517125 0.517125 1.03425 2.0685 4.137 8.274 16.548 33.096 66.192 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.063 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 580.13 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1111+1955_X_dfm.log closed on Wed Mar 4 23:56:29 2020