! Started logfile: /image_prod/ug002_uva//J1109+0658_X_dfm.log on Wed Mar 4 23:55:11 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1109+0658_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1109+0658_X_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.999556 visibilities/baseline/integration-bin. ! Found source: J1109+0658 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 80964 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1109+0658_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.002441Jy sigma=9.074510 ! Fit after self-cal, rms=0.970068Jy sigma=8.771511 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6579 mas, bmaj=1.709 mas, bpa=-2.962 degrees ! Estimated noise=0.600914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206338 Jy ! Component: 100 - total flux cleaned = 0.0270615 Jy ! Total flux subtracted in 100 components = 0.0270615 Jy ! Clean residual min=-0.002628 max=0.005573 Jy/beam ! Clean residual mean=-0.000000 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.0270615 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0270615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062906Jy sigma=0.522617 ! Fit after self-cal, rms=0.061641Jy sigma=0.510846 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579173 Jy ! Component: 100 - total flux cleaned = 0.00951932 Jy ! Total flux subtracted in 100 components = 0.00951932 Jy ! Clean residual min=-0.002392 max=0.005466 Jy/beam ! Clean residual mean=-0.000000 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0365809 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.0365808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060516Jy sigma=0.497563 ! Fit after self-cal, rms=0.060503Jy sigma=0.497196 ! Inverting map ! Added new window around map position (-1.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054198 Jy ! Component: 100 - total flux cleaned = 0.00881547 Jy ! Total flux subtracted in 100 components = 0.00881547 Jy ! Clean residual min=-0.002157 max=0.004435 Jy/beam ! Clean residual mean=-0.000000 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0453963 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.0453963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059675Jy sigma=0.486876 ! Fit after self-cal, rms=0.059493Jy sigma=0.485255 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414449 Jy ! Component: 100 - total flux cleaned = 0.00682755 Jy ! Total flux subtracted in 100 components = 0.00682755 Jy ! Clean residual min=-0.002116 max=0.003941 Jy/beam ! Clean residual mean=0.000000 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0522239 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.0522239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058986Jy sigma=0.478758 ! Fit after self-cal, rms=0.058881Jy sigma=0.477912 ! Inverting map ! Added new window around map position (-2.6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038063 Jy ! Component: 100 - total flux cleaned = 0.00643455 Jy ! Total flux subtracted in 100 components = 0.00643455 Jy ! Clean residual min=-0.001888 max=0.003018 Jy/beam ! Clean residual mean=0.000000 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0586584 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.0586584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058473Jy sigma=0.472663 ! Fit after self-cal, rms=0.058382Jy sigma=0.471801 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8687 mas, bmaj=2.023 mas, bpa=-3.694 degrees ! Estimated noise=0.281122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052107 Jy ! Component: 100 - total flux cleaned = 0.00886093 Jy ! Component: 150 - total flux cleaned = 0.0116672 Jy ! Component: 200 - total flux cleaned = 0.0138667 Jy ! Total flux subtracted in 200 components = 0.0138667 Jy ! Clean residual min=-0.001711 max=0.004654 Jy/beam ! Clean residual mean=0.000004 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0725251 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 70 components and 0.0725251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057861Jy sigma=0.464676 ! Fit after self-cal, rms=0.057742Jy sigma=0.463478 ! Inverting map ! Added new window around map position (-3.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340794 Jy ! Component: 100 - total flux cleaned = 0.00561001 Jy ! Component: 150 - total flux cleaned = 0.00731906 Jy ! Component: 200 - total flux cleaned = 0.00874291 Jy ! Total flux subtracted in 200 components = 0.00874291 Jy ! Clean residual min=-0.001427 max=0.003336 Jy/beam ! Clean residual mean=0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.081268 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 100 components and 0.081268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057524Jy sigma=0.460603 ! Fit after self-cal, rms=0.057431Jy sigma=0.459903 ! Inverting map ! Added new window around map position (0, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275084 Jy ! Component: 100 - total flux cleaned = 0.00469312 Jy ! Component: 150 - total flux cleaned = 0.0062305 Jy ! Component: 200 - total flux cleaned = 0.00748375 Jy ! Total flux subtracted in 200 components = 0.00748375 Jy ! Clean residual min=-0.001208 max=0.001959 Jy/beam ! Clean residual mean=0.000003 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0887517 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 122 components and 0.0887517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057268Jy sigma=0.457966 ! Fit after self-cal, rms=0.057169Jy sigma=0.457590 ! Inverting map ! Added new window around map position (0, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194307 Jy ! Component: 100 - total flux cleaned = 0.00316072 Jy ! Component: 150 - total flux cleaned = 0.00393005 Jy ! Component: 200 - total flux cleaned = 0.00448745 Jy ! Total flux subtracted in 200 components = 0.00448745 Jy ! Clean residual min=-0.001093 max=0.001148 Jy/beam ! Clean residual mean=0.000003 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.0932392 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 134 components and 0.0932392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057083Jy sigma=0.456759 ! Fit after self-cal, rms=0.057006Jy sigma=0.456579 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8687 x 2.023 at -3.694 degrees (North through East) ! Clean map min=-0.0010204 max=0.030186 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.98 KP 1.00 ! LA 0.99 MK 1.13 NL 1.08 OV 1.05 ! PT 0.93 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.05 KP 1.01 ! LA 1.00 MK 1.08 NL 1.12 OV 1.06 ! PT 0.92 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.08 HN 1.01 KP 0.98 ! LA 1.01 MK 1.08 NL 1.05 OV 1.07 ! PT 0.94 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.00 KP 0.98 ! LA 1.01 MK 1.12 NL 1.05 OV 1.06 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.94 KP 1.00 ! LA 1.02 MK 1.11 NL 1.00 OV 1.10 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.03 KP 1.01 ! LA 0.98 MK 1.03 NL 1.07 OV 1.09 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.95 KP 1.03 ! LA 0.99 MK 1.05 NL 1.02 OV 1.07 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.93 KP 1.02 ! LA 1.03 MK 1.04 NL 0.99 OV 1.03 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 0.95 KP 0.98 ! LA 1.01 MK 0.99 NL 1.00 OV 1.08 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 0.91 KP 1.00 ! LA 1.02 MK 0.93 NL 1.08 OV 1.07 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 0.89 KP 1.02 ! LA 1.00 MK 0.90 NL 0.97 OV 1.09 ! PT 0.94 SC 0.90 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.98 HN 0.90 KP 1.02 ! LA 1.03 MK 0.83 NL 0.99 OV 1.07 ! PT 0.91 SC 0.90 ! ! ! Fit before self-cal, rms=0.057006Jy sigma=0.456579 ! Fit after self-cal, rms=0.057165Jy sigma=0.455864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8683 mas, bmaj=2.017 mas, bpa=-3.727 degrees ! Estimated noise=0.283585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264522 Jy ! Component: 100 - total flux cleaned = 0.000145679 Jy ! Component: 150 - total flux cleaned = 7.19492e-05 Jy ! Component: 200 - total flux cleaned = 2.73786e-05 Jy ! Total flux subtracted in 200 components = 2.73786e-05 Jy ! Clean residual min=-0.000826 max=0.001017 Jy/beam ! Clean residual mean=0.000003 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0932666 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 148 components and 0.0932666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057135Jy sigma=0.455610 ! Fit after self-cal, rms=0.057093Jy sigma=0.455411 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057093Jy sigma=0.455411 ! Fit after self-cal, rms=0.057049Jy sigma=0.454765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8657 mas, bmaj=2.013 mas, bpa=-4.029 degrees ! Estimated noise=0.282448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126853 Jy ! Component: 100 - total flux cleaned = 0.00012768 Jy ! Component: 150 - total flux cleaned = 0.000126896 Jy ! Component: 200 - total flux cleaned = 6.9531e-05 Jy ! Total flux subtracted in 200 components = 6.9531e-05 Jy ! Clean residual min=-0.000775 max=0.000990 Jy/beam ! Clean residual mean=0.000002 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0933361 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 158 components and 0.0933361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057028Jy sigma=0.454593 ! Fit after self-cal, rms=0.057020Jy sigma=0.454453 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27.6, 31.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000912543 Jy ! Component: 100 - total flux cleaned = 0.00112445 Jy ! Component: 150 - total flux cleaned = 0.00126496 Jy ! Component: 200 - total flux cleaned = 0.00138943 Jy ! Total flux subtracted in 200 components = 0.00138943 Jy ! Clean residual min=-0.000751 max=0.000822 Jy/beam ! Clean residual mean=0.000002 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.0947255 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 173 components and 0.0947255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056995Jy sigma=0.454227 ! Fit after self-cal, rms=0.056969Jy sigma=0.454159 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056969Jy sigma=0.454159 ! Fit after self-cal, rms=0.056755Jy sigma=0.454105 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8643 mas, bmaj=2.013 mas, bpa=-4.288 degrees ! Estimated noise=0.280829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434283 Jy ! Component: 100 - total flux cleaned = 0.000615291 Jy ! Component: 150 - total flux cleaned = 0.000736233 Jy ! Component: 200 - total flux cleaned = 0.000827663 Jy ! Total flux subtracted in 200 components = 0.000827663 Jy ! Clean residual min=-0.000754 max=0.000767 Jy/beam ! Clean residual mean=0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.0955532 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 181 components and 0.0955532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056738Jy sigma=0.453959 ! Fit after self-cal, rms=0.056728Jy sigma=0.453911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178882 Jy ! Component: 100 - total flux cleaned = 0.000219937 Jy ! Component: 150 - total flux cleaned = 0.000273717 Jy ! Component: 200 - total flux cleaned = 0.000307086 Jy ! Total flux subtracted in 200 components = 0.000307086 Jy ! Clean residual min=-0.000765 max=0.000740 Jy/beam ! Clean residual mean=0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0958603 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 183 components and 0.0958603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056715Jy sigma=0.453806 ! Fit after self-cal, rms=0.056695Jy sigma=0.453750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056695Jy sigma=0.453750 ! Fit after self-cal, rms=0.056446Jy sigma=0.453733 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.185 mas, bmaj=3.096 mas, bpa=3.077 degrees ! Estimated noise=0.35964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220418 Jy ! Component: 100 - total flux cleaned = 0.000330607 Jy ! Component: 150 - total flux cleaned = 0.00043027 Jy ! Component: 200 - total flux cleaned = 0.000519055 Jy ! Total flux subtracted in 200 components = 0.000519055 Jy ! Clean residual min=-0.000960 max=0.001238 Jy/beam ! Clean residual mean=0.000002 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0963793 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 198 components and 0.0963793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056438Jy sigma=0.453667 ! Fit after self-cal, rms=0.056433Jy sigma=0.453640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.6, 50.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104669 Jy ! Component: 100 - total flux cleaned = 0.00140503 Jy ! Component: 150 - total flux cleaned = 0.00158038 Jy ! Component: 200 - total flux cleaned = 0.00176989 Jy ! Total flux subtracted in 200 components = 0.00176989 Jy ! Clean residual min=-0.000890 max=0.000827 Jy/beam ! Clean residual mean=0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0981492 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 233 components and 0.0981492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056422Jy sigma=0.453521 ! Fit after self-cal, rms=0.056411Jy sigma=0.453474 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.014 mas, bpa=-4.467 degrees ! Estimated noise=0.279567 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8631 x 2.014 at -4.467 degrees (North through East) ! Clean map min=-0.0018333 max=0.029961 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6568 mas, bmaj=1.703 mas, bpa=-3.722 degrees ! Estimated noise=0.592606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208469 Jy ! Component: 100 - total flux cleaned = 0.0312421 Jy ! Component: 150 - total flux cleaned = 0.0391449 Jy ! Component: 200 - total flux cleaned = 0.0455112 Jy ! Total flux subtracted in 200 components = 0.0455112 Jy ! Clean residual min=-0.002338 max=0.003880 Jy/beam ! Clean residual mean=-0.000001 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0455112 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0455112 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.014 mas, bpa=-4.467 degrees ! Estimated noise=0.279567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010178 Jy ! Component: 100 - total flux cleaned = 0.0174318 Jy ! Component: 150 - total flux cleaned = 0.0230539 Jy ! Component: 200 - total flux cleaned = 0.0275112 Jy ! Total flux subtracted in 200 components = 0.0275112 Jy ! Clean residual min=-0.001839 max=0.002658 Jy/beam ! Clean residual mean=0.000003 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0730224 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 76 components and 0.0730224 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359977 Jy ! Component: 100 - total flux cleaned = 0.00655697 Jy ! Component: 150 - total flux cleaned = 0.00902764 Jy ! Component: 200 - total flux cleaned = 0.0108862 Jy ! Total flux subtracted in 200 components = 0.0108862 Jy ! Clean residual min=-0.001428 max=0.001671 Jy/beam ! Clean residual mean=0.000002 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.0839086 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 123 components and 0.0839086 Jy ! Inverting map ! Added new window around map position (-3.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174186 Jy ! Component: 100 - total flux cleaned = 0.00307918 Jy ! Component: 150 - total flux cleaned = 0.00432759 Jy ! Component: 200 - total flux cleaned = 0.00528222 Jy ! Total flux subtracted in 200 components = 0.00528222 Jy ! Clean residual min=-0.001131 max=0.001162 Jy/beam ! Clean residual mean=0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.0891908 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 153 components and 0.0891908 Jy ! Inverting map ! Added new window around map position (5.6, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100325 Jy ! Component: 100 - total flux cleaned = 0.00175073 Jy ! Component: 150 - total flux cleaned = 0.00247893 Jy ! Component: 200 - total flux cleaned = 0.00303991 Jy ! Total flux subtracted in 200 components = 0.00303991 Jy ! Clean residual min=-0.000949 max=0.000820 Jy/beam ! Clean residual mean=0.000001 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.0922307 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 177 components and 0.0922307 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.185 mas, bmaj=3.096 mas, bpa=3.077 degrees ! Estimated noise=0.35964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148654 Jy ! Component: 100 - total flux cleaned = 0.00234382 Jy ! Component: 150 - total flux cleaned = 0.00311285 Jy ! Component: 200 - total flux cleaned = 0.00378115 Jy ! Total flux subtracted in 200 components = 0.00378115 Jy ! Clean residual min=-0.001015 max=0.000952 Jy/beam ! Clean residual mean=0.000003 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0960119 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059333 Jy ! Component: 100 - total flux cleaned = 0.000994595 Jy ! Component: 150 - total flux cleaned = 0.00124081 Jy ! Component: 200 - total flux cleaned = 0.00144692 Jy ! Total flux subtracted in 200 components = 0.00144692 Jy ! Clean residual min=-0.000924 max=0.000849 Jy/beam ! Clean residual mean=0.000002 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.0974588 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 248 components and 0.0974588 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.014 mas, bpa=-4.467 degrees ! Estimated noise=0.279567 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130802 Jy ! Component: 100 - total flux cleaned = 1.36974e-06 Jy ! Component: 150 - total flux cleaned = 0.000115735 Jy ! Component: 200 - total flux cleaned = 0.000279638 Jy ! Total flux subtracted in 200 components = 0.000279638 Jy ! Clean residual min=-0.000696 max=0.000600 Jy/beam ! Clean residual mean=0.000001 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.0977385 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 274 components and 0.0977385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056416Jy sigma=0.453532 ! Fit after self-cal, rms=0.056383Jy sigma=0.453314 wmodel J1109+0658_X_map.mod ! Writing 274 model components to file: J1109+0658_X_map.mod wobs J1109+0658_X_uvs.fits ! Writing UV FITS file: J1109+0658_X_uvs.fits wwins J1109+0658_X_map.win ! wwins: Wrote 10 windows to J1109+0658_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177023 Jy ! Component: 100 - total flux cleaned = -0.000280027 Jy ! Component: 150 - total flux cleaned = -0.000291227 Jy ! Component: 200 - total flux cleaned = -0.000312488 Jy ! Component: 250 - total flux cleaned = -0.000353504 Jy ! Component: 300 - total flux cleaned = -0.000373432 Jy ! Component: 350 - total flux cleaned = -0.000412455 Jy ! Component: 400 - total flux cleaned = -0.000412238 Jy ! Component: 450 - total flux cleaned = -0.000449569 Jy ! Component: 500 - total flux cleaned = -0.00044957 Jy ! Component: 550 - total flux cleaned = -0.000467778 Jy ! Component: 600 - total flux cleaned = -0.000521286 Jy ! Component: 650 - total flux cleaned = -0.000547583 Jy ! Component: 700 - total flux cleaned = -0.000573651 Jy ! Component: 750 - total flux cleaned = -0.000599415 Jy ! Component: 800 - total flux cleaned = -0.000624778 Jy ! Component: 850 - total flux cleaned = -0.000658192 Jy ! Component: 900 - total flux cleaned = -0.00064984 Jy ! Component: 950 - total flux cleaned = -0.000674362 Jy ! Component: 1000 - total flux cleaned = -0.000682546 Jy ! Component: 1050 - total flux cleaned = -0.000690615 Jy ! Component: 1100 - total flux cleaned = -0.000698598 Jy ! Component: 1150 - total flux cleaned = -0.000714258 Jy ! Component: 1200 - total flux cleaned = -0.000706543 Jy ! Component: 1250 - total flux cleaned = -0.000722119 Jy ! Component: 1300 - total flux cleaned = -0.000745052 Jy ! Component: 1350 - total flux cleaned = -0.000752532 Jy ! Component: 1400 - total flux cleaned = -0.000715096 Jy ! Component: 1450 - total flux cleaned = -0.000759704 Jy ! Component: 1500 - total flux cleaned = -0.000744885 Jy ! Component: 1550 - total flux cleaned = -0.000730361 Jy ! Component: 1600 - total flux cleaned = -0.000737608 Jy ! Component: 1650 - total flux cleaned = -0.00072323 Jy ! Component: 1700 - total flux cleaned = -0.0007231 Jy ! Component: 1750 - total flux cleaned = -0.000701857 Jy ! Component: 1800 - total flux cleaned = -0.000666825 Jy ! Component: 1850 - total flux cleaned = -0.000659817 Jy ! Component: 1900 - total flux cleaned = -0.000659792 Jy ! Component: 1950 - total flux cleaned = -0.000639228 Jy ! Component: 2000 - total flux cleaned = -0.0006528 Jy ! Component: 2050 - total flux cleaned = -0.000632458 Jy ! Component: 2100 - total flux cleaned = -0.000632403 Jy ! Component: 2150 - total flux cleaned = -0.000605835 Jy ! Component: 2200 - total flux cleaned = -0.0006256 Jy ! Component: 2250 - total flux cleaned = -0.000605967 Jy ! Component: 2300 - total flux cleaned = -0.000592976 Jy ! Component: 2350 - total flux cleaned = -0.00059299 Jy ! Component: 2400 - total flux cleaned = -0.000580079 Jy ! Component: 2450 - total flux cleaned = -0.000541818 Jy ! Component: 2500 - total flux cleaned = -0.000560909 Jy ! Component: 2550 - total flux cleaned = -0.000523186 Jy ! Component: 2600 - total flux cleaned = -0.000535662 Jy ! Component: 2650 - total flux cleaned = -0.000510823 Jy ! Component: 2700 - total flux cleaned = -0.000516941 Jy ! Component: 2750 - total flux cleaned = -0.000486286 Jy ! Component: 2800 - total flux cleaned = -0.000461878 Jy ! Component: 2850 - total flux cleaned = -0.000474044 Jy ! Component: 2900 - total flux cleaned = -0.000425896 Jy ! Component: 2950 - total flux cleaned = -0.000419902 Jy ! Component: 3000 - total flux cleaned = -0.000402111 Jy ! Component: 3050 - total flux cleaned = -0.000384364 Jy ! Component: 3100 - total flux cleaned = -0.000366776 Jy ! Component: 3150 - total flux cleaned = -0.00036093 Jy ! Component: 3200 - total flux cleaned = -0.000349335 Jy ! Component: 3250 - total flux cleaned = -0.000331938 Jy ! Component: 3300 - total flux cleaned = -0.00030329 Jy ! Component: 3350 - total flux cleaned = -0.000303344 Jy ! Component: 3400 - total flux cleaned = -0.000280666 Jy ! Component: 3450 - total flux cleaned = -0.000308856 Jy ! Component: 3500 - total flux cleaned = -0.000292068 Jy ! Component: 3550 - total flux cleaned = -0.000264133 Jy ! Component: 3600 - total flux cleaned = -0.000269736 Jy ! Component: 3650 - total flux cleaned = -0.000247631 Jy ! Component: 3700 - total flux cleaned = -0.000253119 Jy ! Component: 3750 - total flux cleaned = -0.000258584 Jy ! Component: 3800 - total flux cleaned = -0.000247728 Jy ! Component: 3850 - total flux cleaned = -0.000231496 Jy ! Component: 3900 - total flux cleaned = -0.000220725 Jy ! Component: 3950 - total flux cleaned = -0.000226036 Jy ! Component: 4000 - total flux cleaned = -0.000188787 Jy ! Component: 4050 - total flux cleaned = -0.000188768 Jy ! Total flux subtracted in 4096 components = -0.000183482 Jy ! Clean residual min=-0.000309 max=0.000317 Jy/beam ! Clean residual mean=0.000000 rms=0.000094 Jy/beam ! Combined flux in latest and established models = 0.097555 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 597 components and 0.097555 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1109+0658_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8631 x 2.014 at -4.467 degrees (North through East) ! Clean map min=-0.0015756 max=0.029621 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1109+0658_X_map.fits wmodel /image_prod/ug002_uva//J1109+0658_X_map.mod ! Writing 597 model components to file: /image_prod/ug002_uva//J1109+0658_X_map.mod wobs /image_prod/ug002_uva//J1109+0658_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1109+0658_X_uvs.fits wwins /image_prod/ug002_uva//J1109+0658_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1109+0658_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0296212 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.38183e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.950181 0.950181 1.90036 3.80072 7.60145 15.2029 30.4058 60.8116 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.029 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 315.729 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1109+0658_X_dfm.log closed on Wed Mar 4 23:55:20 2020