! Started logfile: /image_prod/ug002_uva//J1107-1226_S_dfm.log on Wed Mar 4 23:54:24 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1107-1226_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1107-1226_S_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.999259 visibilities/baseline/integration-bin. ! Found source: J1107-1226 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4047 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1107-1226_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.005829Jy sigma=7.821602 ! Fit after self-cal, rms=0.929391Jy sigma=7.205318 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=7.234 mas, bpa=-2.187 degrees ! Estimated noise=2.04929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0578379 Jy ! Component: 100 - total flux cleaned = 0.0705928 Jy ! Total flux subtracted in 100 components = 0.0705928 Jy ! Clean residual min=-0.004462 max=0.004324 Jy/beam ! Clean residual mean=0.000002 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.0705929 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0705929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071700Jy sigma=0.470020 ! Fit after self-cal, rms=0.071257Jy sigma=0.467576 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=8.339 mas, bpa=-1.969 degrees ! Estimated noise=1.49412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385344 Jy ! Component: 100 - total flux cleaned = 0.00557324 Jy ! Component: 150 - total flux cleaned = 0.00637099 Jy ! Component: 200 - total flux cleaned = 0.00645446 Jy ! Total flux subtracted in 200 components = 0.00645446 Jy ! Clean residual min=-0.002809 max=0.002723 Jy/beam ! Clean residual mean=0.000004 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0770473 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 31 components and 0.0770473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071071Jy sigma=0.465786 ! Fit after self-cal, rms=0.071089Jy sigma=0.465769 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.332 x 8.339 at -1.969 degrees (North through East) ! Clean map min=-0.0027504 max=0.073603 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.96 KP 1.04 ! LA 1.00 MK 1.06 NL 1.01 OV 1.06 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.98 KP 1.04 ! LA 0.99 MK 0.98 NL 1.14 OV 0.93 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.22 KP 1.05 ! LA 0.99 MK 0.94 NL 0.85 OV 0.94 ! PT 1.01 SC 1.02 ! ! ! Fit before self-cal, rms=0.071089Jy sigma=0.465769 ! Fit after self-cal, rms=0.070159Jy sigma=0.462937 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=8.337 mas, bpa=-2.002 degrees ! Estimated noise=1.48901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252077 Jy ! Component: 100 - total flux cleaned = -0.000277077 Jy ! Component: 150 - total flux cleaned = -0.000325478 Jy ! Component: 200 - total flux cleaned = -0.000370277 Jy ! Total flux subtracted in 200 components = -0.000370277 Jy ! Clean residual min=-0.002675 max=0.002458 Jy/beam ! Clean residual mean=-0.000001 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.076677 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.076677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070137Jy sigma=0.462815 ! Fit after self-cal, rms=0.070169Jy sigma=0.462696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070169Jy sigma=0.462696 ! Fit after self-cal, rms=0.073530Jy sigma=0.460473 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=8.437 mas, bpa=-1.93 degrees ! Estimated noise=1.49416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.68598e-05 Jy ! Component: 100 - total flux cleaned = 0.000150042 Jy ! Component: 150 - total flux cleaned = 0.000170252 Jy ! Component: 200 - total flux cleaned = 0.000168654 Jy ! Total flux subtracted in 200 components = 0.000168654 Jy ! Clean residual min=-0.002805 max=0.002192 Jy/beam ! Clean residual mean=0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0768457 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.0768457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073509Jy sigma=0.460395 ! Fit after self-cal, rms=0.073606Jy sigma=0.460305 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.16583e-05 Jy ! Component: 100 - total flux cleaned = 6.22865e-05 Jy ! Component: 150 - total flux cleaned = 4.63208e-05 Jy ! Component: 200 - total flux cleaned = 4.59407e-05 Jy ! Total flux subtracted in 200 components = 4.59407e-05 Jy ! Clean residual min=-0.002743 max=0.002179 Jy/beam ! Clean residual mean=0.000002 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0768916 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.0768916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073595Jy sigma=0.460263 ! Fit after self-cal, rms=0.073597Jy sigma=0.460261 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073597Jy sigma=0.460261 ! Fit after self-cal, rms=0.074334Jy sigma=0.460246 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=8.452 mas, bpa=-1.943 degrees ! Estimated noise=1.49901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194416 Jy ! Component: 100 - total flux cleaned = 0.000227778 Jy ! Component: 150 - total flux cleaned = 0.000244039 Jy ! Component: 200 - total flux cleaned = 0.000243232 Jy ! Total flux subtracted in 200 components = 0.000243232 Jy ! Clean residual min=-0.002744 max=0.002188 Jy/beam ! Clean residual mean=0.000002 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0771348 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0771348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074322Jy sigma=0.460213 ! Fit after self-cal, rms=0.074332Jy sigma=0.460210 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.43478e-05 Jy ! Component: 100 - total flux cleaned = 1.70248e-07 Jy ! Component: 150 - total flux cleaned = 1.90743e-07 Jy ! Component: 200 - total flux cleaned = -1.3064e-05 Jy ! Total flux subtracted in 200 components = -1.3064e-05 Jy ! Clean residual min=-0.002725 max=0.002197 Jy/beam ! Clean residual mean=0.000002 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0771218 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.0771218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074324Jy sigma=0.460186 ! Fit after self-cal, rms=0.074323Jy sigma=0.460184 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074323Jy sigma=0.460184 ! Fit after self-cal, rms=0.074631Jy sigma=0.460179 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.743 mas, bmaj=15.41 mas, bpa=0.601 degrees ! Estimated noise=1.78838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181667 Jy ! Component: 100 - total flux cleaned = 0.000181123 Jy ! Component: 150 - total flux cleaned = 0.00018091 Jy ! Component: 200 - total flux cleaned = 0.000181543 Jy ! Total flux subtracted in 200 components = 0.000181543 Jy ! Clean residual min=-0.002375 max=0.002361 Jy/beam ! Clean residual mean=0.000002 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0773033 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 59 components and 0.0773033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074628Jy sigma=0.460206 ! Fit after self-cal, rms=0.074633Jy sigma=0.460198 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.80397e-05 Jy ! Component: 100 - total flux cleaned = -6.40894e-05 Jy ! Component: 150 - total flux cleaned = -6.44656e-05 Jy ! Component: 200 - total flux cleaned = -6.49597e-05 Jy ! Total flux subtracted in 200 components = -6.49597e-05 Jy ! Clean residual min=-0.002375 max=0.002341 Jy/beam ! Clean residual mean=0.000002 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0772384 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.0772384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074634Jy sigma=0.460214 ! Fit after self-cal, rms=0.074634Jy sigma=0.460211 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=8.454 mas, bpa=-1.954 degrees ! Estimated noise=1.50213 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 8.454 at -1.954 degrees (North through East) ! Clean map min=-0.0026518 max=0.074208 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=7.306 mas, bpa=-2.053 degrees ! Estimated noise=2.06458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0585026 Jy ! Component: 100 - total flux cleaned = 0.0713798 Jy ! Component: 150 - total flux cleaned = 0.0755812 Jy ! Component: 200 - total flux cleaned = 0.0777062 Jy ! Total flux subtracted in 200 components = 0.0777062 Jy ! Clean residual min=-0.003800 max=0.003298 Jy/beam ! Clean residual mean=0.000004 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.0777062 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0777062 Jy ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=8.454 mas, bpa=-1.954 degrees ! Estimated noise=1.50213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000496087 Jy ! Component: 100 - total flux cleaned = -0.000404922 Jy ! Component: 150 - total flux cleaned = -0.000334356 Jy ! Component: 200 - total flux cleaned = -0.000314524 Jy ! Total flux subtracted in 200 components = -0.000314524 Jy ! Clean residual min=-0.002751 max=0.002210 Jy/beam ! Clean residual mean=0.000002 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.0773916 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.0773916 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.743 mas, bmaj=15.41 mas, bpa=0.601 degrees ! Estimated noise=1.78838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.37744e-05 Jy ! Component: 100 - total flux cleaned = -9.34741e-05 Jy ! Component: 150 - total flux cleaned = -0.00011566 Jy ! Component: 200 - total flux cleaned = -0.000124647 Jy ! Total flux subtracted in 200 components = -0.000124647 Jy ! Clean residual min=-0.002397 max=0.002338 Jy/beam ! Clean residual mean=0.000002 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.077267 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.44298e-05 Jy ! Component: 100 - total flux cleaned = -2.02455e-05 Jy ! Component: 150 - total flux cleaned = -2.00237e-05 Jy ! Component: 200 - total flux cleaned = -2.45445e-05 Jy ! Total flux subtracted in 200 components = -2.45445e-05 Jy ! Clean residual min=-0.002387 max=0.002317 Jy/beam ! Clean residual mean=0.000002 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0772424 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.0772425 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=8.454 mas, bpa=-1.954 degrees ! Estimated noise=1.50213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55776e-05 Jy ! Component: 100 - total flux cleaned = 8.89331e-05 Jy ! Component: 150 - total flux cleaned = 0.000129002 Jy ! Component: 200 - total flux cleaned = 0.000162942 Jy ! Total flux subtracted in 200 components = 0.000162942 Jy ! Clean residual min=-0.002723 max=0.002211 Jy/beam ! Clean residual mean=0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0774054 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.0774054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074657Jy sigma=0.460291 ! Fit after self-cal, rms=0.074648Jy sigma=0.460286 wmodel J1107-1226_S_map.mod ! Writing 51 model components to file: J1107-1226_S_map.mod wobs J1107-1226_S_uvs.fits ! Writing UV FITS file: J1107-1226_S_uvs.fits wwins J1107-1226_S_map.win ! wwins: Wrote 1 windows to J1107-1226_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00097523 Jy ! Component: 100 - total flux cleaned = -0.00122302 Jy ! Component: 150 - total flux cleaned = -0.00138075 Jy ! Component: 200 - total flux cleaned = -0.00138211 Jy ! Component: 250 - total flux cleaned = -0.00145509 Jy ! Component: 300 - total flux cleaned = -0.00152529 Jy ! Component: 350 - total flux cleaned = -0.00152536 Jy ! Component: 400 - total flux cleaned = -0.00139242 Jy ! Component: 450 - total flux cleaned = -0.0013926 Jy ! Component: 500 - total flux cleaned = -0.00129682 Jy ! Component: 550 - total flux cleaned = -0.00126567 Jy ! Component: 600 - total flux cleaned = -0.00123556 Jy ! Component: 650 - total flux cleaned = -0.00123573 Jy ! Component: 700 - total flux cleaned = -0.00117699 Jy ! Component: 750 - total flux cleaned = -0.00111962 Jy ! Component: 800 - total flux cleaned = -0.00117699 Jy ! Component: 850 - total flux cleaned = -0.00103514 Jy ! Component: 900 - total flux cleaned = -0.000979363 Jy ! Component: 950 - total flux cleaned = -0.000896307 Jy ! Component: 1000 - total flux cleaned = -0.000733745 Jy ! Component: 1050 - total flux cleaned = -0.000653819 Jy ! Component: 1100 - total flux cleaned = -0.000653957 Jy ! Component: 1150 - total flux cleaned = -0.000497519 Jy ! Component: 1200 - total flux cleaned = -0.000497542 Jy ! Component: 1250 - total flux cleaned = -0.000344913 Jy ! Component: 1300 - total flux cleaned = -0.000294955 Jy ! Component: 1350 - total flux cleaned = -0.00024533 Jy ! Component: 1400 - total flux cleaned = -9.83286e-05 Jy ! Component: 1450 - total flux cleaned = -7.38414e-05 Jy ! Component: 1500 - total flux cleaned = 7.00734e-05 Jy ! Component: 1550 - total flux cleaned = 6.9916e-05 Jy ! Component: 1600 - total flux cleaned = 0.000116876 Jy ! Component: 1650 - total flux cleaned = 0.000186704 Jy ! Component: 1700 - total flux cleaned = 0.000301502 Jy ! Component: 1750 - total flux cleaned = 0.000301595 Jy ! Component: 1800 - total flux cleaned = 0.000436849 Jy ! Component: 1850 - total flux cleaned = 0.00052589 Jy ! Component: 1900 - total flux cleaned = 0.000525665 Jy ! Component: 1950 - total flux cleaned = 0.000612872 Jy ! Component: 2000 - total flux cleaned = 0.000634492 Jy ! Component: 2050 - total flux cleaned = 0.000677557 Jy ! Component: 2100 - total flux cleaned = 0.000720252 Jy ! Component: 2150 - total flux cleaned = 0.000783538 Jy ! Component: 2200 - total flux cleaned = 0.000867052 Jy ! Component: 2250 - total flux cleaned = 0.000887726 Jy ! Component: 2300 - total flux cleaned = 0.000928695 Jy ! Component: 2350 - total flux cleaned = 0.00096957 Jy ! Component: 2400 - total flux cleaned = 0.000929094 Jy ! Component: 2450 - total flux cleaned = 0.000969441 Jy ! Component: 2500 - total flux cleaned = 0.00102911 Jy ! Component: 2550 - total flux cleaned = 0.00102905 Jy ! Component: 2600 - total flux cleaned = 0.00106811 Jy ! Component: 2650 - total flux cleaned = 0.00106815 Jy ! Component: 2700 - total flux cleaned = 0.0011261 Jy ! Component: 2750 - total flux cleaned = 0.00108765 Jy ! Component: 2800 - total flux cleaned = 0.0010687 Jy ! Component: 2850 - total flux cleaned = 0.00110632 Jy ! Component: 2900 - total flux cleaned = 0.00121865 Jy ! Component: 2950 - total flux cleaned = 0.00116262 Jy ! Component: 3000 - total flux cleaned = 0.00114418 Jy ! Component: 3050 - total flux cleaned = 0.00123592 Jy ! Component: 3100 - total flux cleaned = 0.00123584 Jy ! Component: 3150 - total flux cleaned = 0.00125378 Jy ! Component: 3200 - total flux cleaned = 0.00121758 Jy ! Component: 3250 - total flux cleaned = 0.00123565 Jy ! Component: 3300 - total flux cleaned = 0.00130648 Jy ! Component: 3350 - total flux cleaned = 0.00116527 Jy ! Component: 3400 - total flux cleaned = 0.00125276 Jy ! Component: 3450 - total flux cleaned = 0.00116571 Jy ! Component: 3500 - total flux cleaned = 0.00121779 Jy ! Component: 3550 - total flux cleaned = 0.00118339 Jy ! Component: 3600 - total flux cleaned = 0.00118353 Jy ! Component: 3650 - total flux cleaned = 0.00118365 Jy ! Component: 3700 - total flux cleaned = 0.00121737 Jy ! Component: 3750 - total flux cleaned = 0.00120066 Jy ! Component: 3800 - total flux cleaned = 0.00123399 Jy ! Component: 3850 - total flux cleaned = 0.00133357 Jy ! Component: 3900 - total flux cleaned = 0.00128403 Jy ! Component: 3950 - total flux cleaned = 0.00123484 Jy ! Component: 4000 - total flux cleaned = 0.00128374 Jy ! Component: 4050 - total flux cleaned = 0.00128373 Jy ! Total flux subtracted in 4096 components = 0.00131591 Jy ! Clean residual min=-0.001018 max=0.000896 Jy/beam ! Clean residual mean=0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0787213 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 304 components and 0.0787214 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1107-1226_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 8.454 at -1.954 degrees (North through East) ! Clean map min=-0.0022634 max=0.074025 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1107-1226_S_map.fits wmodel /image_prod/ug002_uva//J1107-1226_S_map.mod ! Writing 304 model components to file: /image_prod/ug002_uva//J1107-1226_S_map.mod wobs /image_prod/ug002_uva//J1107-1226_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1107-1226_S_uvs.fits wwins /image_prod/ug002_uva//J1107-1226_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1107-1226_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0740247 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000278538 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12883 1.12883 2.25766 4.51532 9.03065 18.0613 36.1226 72.2452 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.074 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 265.761 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1107-1226_S_dfm.log closed on Wed Mar 4 23:54:27 2020