! Started logfile: /image_prod/ug002_uva//J1058-0309_X_dfm.log on Wed Mar 4 23:49:20 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1058-0309_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1058-0309_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.992963 visibilities/baseline/integration-bin. ! Found source: J1058-0309 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32172 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1058-0309_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.005700Jy sigma=9.744246 ! Fit after self-cal, rms=0.938548Jy sigma=9.070399 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6829 mas, bmaj=1.749 mas, bpa=-2.65 degrees ! Estimated noise=0.774534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447987 Jy ! Component: 100 - total flux cleaned = 0.0599262 Jy ! Total flux subtracted in 100 components = 0.0599262 Jy ! Clean residual min=-0.005647 max=0.020194 Jy/beam ! Clean residual mean=0.000001 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.0599262 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0599262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066608Jy sigma=0.624584 ! Fit after self-cal, rms=0.065554Jy sigma=0.614334 ! Inverting map ! Added new window around map position (2, -4.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017641 Jy ! Component: 100 - total flux cleaned = 0.0252695 Jy ! Total flux subtracted in 100 components = 0.0252695 Jy ! Clean residual min=-0.004461 max=0.013354 Jy/beam ! Clean residual mean=0.000002 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.0851956 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.0851956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060509Jy sigma=0.561591 ! Fit after self-cal, rms=0.059829Jy sigma=0.555362 ! Inverting map ! Added new window around map position (4.6, -11). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127796 Jy ! Component: 100 - total flux cleaned = 0.0198916 Jy ! Total flux subtracted in 100 components = 0.0198916 Jy ! Clean residual min=-0.003258 max=0.006272 Jy/beam ! Clean residual mean=0.000001 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.105087 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.105087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056292Jy sigma=0.517217 ! Fit after self-cal, rms=0.055699Jy sigma=0.511590 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708423 Jy ! Component: 100 - total flux cleaned = 0.0116725 Jy ! Total flux subtracted in 100 components = 0.0116725 Jy ! Clean residual min=-0.002710 max=0.003709 Jy/beam ! Clean residual mean=0.000001 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.11676 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.11676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054323Jy sigma=0.496424 ! Fit after self-cal, rms=0.054172Jy sigma=0.494988 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.066 mas, bpa=-2.128 degrees ! Estimated noise=0.413305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00723253 Jy ! Component: 100 - total flux cleaned = 0.0117959 Jy ! Component: 150 - total flux cleaned = 0.0152262 Jy ! Component: 200 - total flux cleaned = 0.0179461 Jy ! Total flux subtracted in 200 components = 0.0179461 Jy ! Clean residual min=-0.002746 max=0.004181 Jy/beam ! Clean residual mean=0.000001 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.134706 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 56 components and 0.134706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053071Jy sigma=0.482497 ! Fit after self-cal, rms=0.052942Jy sigma=0.481139 ! Inverting map ! Added new window around map position (6.4, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415489 Jy ! Component: 100 - total flux cleaned = 0.00684829 Jy ! Component: 150 - total flux cleaned = 0.00892763 Jy ! Component: 200 - total flux cleaned = 0.0104482 Jy ! Total flux subtracted in 200 components = 0.0104482 Jy ! Clean residual min=-0.002080 max=0.002637 Jy/beam ! Clean residual mean=0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.145154 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 90 components and 0.145154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052559Jy sigma=0.476697 ! Fit after self-cal, rms=0.052525Jy sigma=0.476280 ! Inverting map ! Added new window around map position (3, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025242 Jy ! Component: 100 - total flux cleaned = 0.00357838 Jy ! Component: 150 - total flux cleaned = 0.00452017 Jy ! Component: 200 - total flux cleaned = 0.0053445 Jy ! Total flux subtracted in 200 components = 0.0053445 Jy ! Clean residual min=-0.001729 max=0.002136 Jy/beam ! Clean residual mean=0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.150498 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 111 components and 0.150498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052362Jy sigma=0.474520 ! Fit after self-cal, rms=0.052350Jy sigma=0.474375 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8564 x 2.066 at -2.128 degrees (North through East) ! Clean map min=-0.0016819 max=0.05546 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.08 HN 1.03 KP 1.00 ! LA 0.99 MK 1.07 NL 1.06 OV 0.89 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.11 HN 1.01 KP 1.00 ! LA 0.98 MK 0.98 NL 1.09 OV 0.91 ! PT 0.90 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.02 KP 1.00 ! LA 1.02 MK 0.97 NL 1.10 OV 0.91 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 1.05 KP 0.99 ! LA 0.99 MK 1.01 NL 1.13 OV 0.93 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.00 KP 1.04 ! LA 0.98 MK 0.96 NL 1.09 OV 0.92 ! PT 0.91 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.02 KP 1.02 ! LA 0.99 MK 1.00 NL 1.09 OV 0.87 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 1.02 KP 1.00 ! LA 0.99 MK 0.97 NL 1.07 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.98 KP 1.02 ! LA 1.03 MK 1.04 NL 1.08 OV 0.91 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 0.97 KP 1.01 ! LA 0.98 MK 1.00 NL 1.08 OV 0.93 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.03 KP 0.98 ! LA 1.03 MK 1.04 NL 1.10 OV 0.99 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 1.06 KP 0.98 ! LA 0.99 MK 0.96 NL 1.10 OV 0.96 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 1.03 KP 1.03 ! LA 1.00 MK 1.00 NL 1.07 OV 0.95 ! PT 0.92 SC 1.01 ! ! ! Fit before self-cal, rms=0.052350Jy sigma=0.474375 ! Fit after self-cal, rms=0.052381Jy sigma=0.471180 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.86 mas, bmaj=2.078 mas, bpa=-2.177 degrees ! Estimated noise=0.414185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114089 Jy ! Component: 100 - total flux cleaned = 0.00118674 Jy ! Component: 150 - total flux cleaned = 0.00111733 Jy ! Component: 200 - total flux cleaned = 0.00102479 Jy ! Total flux subtracted in 200 components = 0.00102479 Jy ! Clean residual min=-0.001141 max=0.001287 Jy/beam ! Clean residual mean=-0.000000 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.151523 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 134 components and 0.151523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052315Jy sigma=0.470554 ! Fit after self-cal, rms=0.052326Jy sigma=0.470462 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052326Jy sigma=0.470462 ! Fit after self-cal, rms=0.052565Jy sigma=0.468716 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.077 mas, bpa=-2.237 degrees ! Estimated noise=0.41452 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.50281e-05 Jy ! Component: 100 - total flux cleaned = -0.000183236 Jy ! Component: 150 - total flux cleaned = -0.000368843 Jy ! Component: 200 - total flux cleaned = -0.00051884 Jy ! Total flux subtracted in 200 components = -0.00051884 Jy ! Clean residual min=-0.000905 max=0.000994 Jy/beam ! Clean residual mean=-0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.151004 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 150 components and 0.151004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052541Jy sigma=0.468471 ! Fit after self-cal, rms=0.052547Jy sigma=0.468432 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.4, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000707378 Jy ! Component: 100 - total flux cleaned = 0.00085317 Jy ! Component: 150 - total flux cleaned = 0.000854688 Jy ! Component: 200 - total flux cleaned = 0.000815345 Jy ! Total flux subtracted in 200 components = 0.000815345 Jy ! Clean residual min=-0.000852 max=0.000905 Jy/beam ! Clean residual mean=-0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.15182 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 170 components and 0.15182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052524Jy sigma=0.468215 ! Fit after self-cal, rms=0.052524Jy sigma=0.468204 ! Inverting map ! Added new window around map position (37.6, -46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513968 Jy ! Component: 100 - total flux cleaned = 0.000598615 Jy ! Component: 150 - total flux cleaned = 0.00061702 Jy ! Component: 200 - total flux cleaned = 0.000598854 Jy ! Total flux subtracted in 200 components = 0.000598854 Jy ! Clean residual min=-0.000821 max=0.000850 Jy/beam ! Clean residual mean=-0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.152419 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 185 components and 0.152419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052506Jy sigma=0.468040 ! Fit after self-cal, rms=0.052505Jy sigma=0.468032 ! Inverting map ! Added new window around map position (-3.8, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519097 Jy ! Component: 100 - total flux cleaned = 0.000654837 Jy ! Component: 150 - total flux cleaned = 0.000743573 Jy ! Component: 200 - total flux cleaned = 0.000709748 Jy ! Total flux subtracted in 200 components = 0.000709748 Jy ! Clean residual min=-0.000772 max=0.000813 Jy/beam ! Clean residual mean=-0.000000 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.153128 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 207 components and 0.153128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052489Jy sigma=0.467876 ! Fit after self-cal, rms=0.052488Jy sigma=0.467869 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052488Jy sigma=0.467869 ! Fit after self-cal, rms=0.053483Jy sigma=0.468024 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8553 mas, bmaj=2.076 mas, bpa=-2.187 degrees ! Estimated noise=0.416986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72275e-05 Jy ! Component: 100 - total flux cleaned = 0.000105653 Jy ! Component: 150 - total flux cleaned = 0.000216748 Jy ! Component: 200 - total flux cleaned = 0.000317523 Jy ! Total flux subtracted in 200 components = 0.000317523 Jy ! Clean residual min=-0.000790 max=0.000809 Jy/beam ! Clean residual mean=0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.153446 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 226 components and 0.153446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053468Jy sigma=0.467899 ! Fit after self-cal, rms=0.053482Jy sigma=0.467876 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (40.6, -14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00055154 Jy ! Component: 100 - total flux cleaned = 0.000608889 Jy ! Component: 150 - total flux cleaned = 0.000607483 Jy ! Component: 200 - total flux cleaned = 0.000528039 Jy ! Total flux subtracted in 200 components = 0.000528039 Jy ! Clean residual min=-0.000746 max=0.000773 Jy/beam ! Clean residual mean=0.000000 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.153974 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 244 components and 0.153974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053464Jy sigma=0.467734 ! Fit after self-cal, rms=0.053463Jy sigma=0.467726 ! Inverting map ! Added new window around map position (-47.6, 29.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523651 Jy ! Component: 100 - total flux cleaned = 0.000594195 Jy ! Component: 150 - total flux cleaned = 0.000626827 Jy ! Component: 200 - total flux cleaned = 0.000656864 Jy ! Total flux subtracted in 200 components = 0.000656864 Jy ! Clean residual min=-0.000731 max=0.000715 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.154631 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 256 components and 0.154631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053449Jy sigma=0.467624 ! Fit after self-cal, rms=0.053449Jy sigma=0.467618 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053449Jy sigma=0.467618 ! Fit after self-cal, rms=0.053644Jy sigma=0.467651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.156 mas, bmaj=3.571 mas, bpa=0.001706 degrees ! Estimated noise=0.520815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169898 Jy ! Component: 100 - total flux cleaned = -0.000183281 Jy ! Component: 150 - total flux cleaned = -0.000226914 Jy ! Component: 200 - total flux cleaned = -0.000240494 Jy ! Total flux subtracted in 200 components = -0.000240494 Jy ! Clean residual min=-0.000653 max=0.000760 Jy/beam ! Clean residual mean=0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.15439 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 275 components and 0.15439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053639Jy sigma=0.467619 ! Fit after self-cal, rms=0.053640Jy sigma=0.467608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.83655e-05 Jy ! Component: 100 - total flux cleaned = -8.21901e-05 Jy ! Component: 150 - total flux cleaned = -0.000103799 Jy ! Component: 200 - total flux cleaned = -0.000165549 Jy ! Total flux subtracted in 200 components = -0.000165549 Jy ! Clean residual min=-0.000630 max=0.000711 Jy/beam ! Clean residual mean=0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.154225 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 284 components and 0.154225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053638Jy sigma=0.467595 ! Fit after self-cal, rms=0.053637Jy sigma=0.467592 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=2.077 mas, bpa=-2.176 degrees ! Estimated noise=0.417893 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8551 x 2.077 at -2.176 degrees (North through East) ! Clean map min=-0.00063932 max=0.055639 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6792 mas, bmaj=1.752 mas, bpa=-2.741 degrees ! Estimated noise=0.790557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487808 Jy ! Component: 100 - total flux cleaned = 0.0735786 Jy ! Component: 150 - total flux cleaned = 0.0895085 Jy ! Component: 200 - total flux cleaned = 0.100925 Jy ! Total flux subtracted in 200 components = 0.100925 Jy ! Clean residual min=-0.003260 max=0.006466 Jy/beam ! Clean residual mean=0.000000 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.100925 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.100925 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=2.077 mas, bpa=-2.176 degrees ! Estimated noise=0.417893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124946 Jy ! Component: 100 - total flux cleaned = 0.020677 Jy ! Component: 150 - total flux cleaned = 0.0265795 Jy ! Component: 200 - total flux cleaned = 0.0310087 Jy ! Total flux subtracted in 200 components = 0.0310087 Jy ! Clean residual min=-0.001660 max=0.002552 Jy/beam ! Clean residual mean=0.000001 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.131934 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 43 components and 0.131934 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033561 Jy ! Component: 100 - total flux cleaned = 0.00591672 Jy ! Component: 150 - total flux cleaned = 0.00790345 Jy ! Component: 200 - total flux cleaned = 0.00949831 Jy ! Total flux subtracted in 200 components = 0.00949831 Jy ! Clean residual min=-0.001090 max=0.001358 Jy/beam ! Clean residual mean=0.000000 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.141432 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 65 components and 0.141432 Jy ! Inverting map ! Added new window around map position (-2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145195 Jy ! Component: 100 - total flux cleaned = 0.00263835 Jy ! Component: 150 - total flux cleaned = 0.00370684 Jy ! Component: 200 - total flux cleaned = 0.0046835 Jy ! Total flux subtracted in 200 components = 0.0046835 Jy ! Clean residual min=-0.000979 max=0.001037 Jy/beam ! Clean residual mean=0.000000 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.146115 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 98 components and 0.146115 Jy ! Inverting map ! Added new window around map position (-3.4, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010142 Jy ! Component: 100 - total flux cleaned = 0.00173805 Jy ! Component: 150 - total flux cleaned = 0.00237436 Jy ! Component: 200 - total flux cleaned = 0.00290766 Jy ! Total flux subtracted in 200 components = 0.00290766 Jy ! Clean residual min=-0.000886 max=0.000940 Jy/beam ! Clean residual mean=0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.149023 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 125 components and 0.149023 Jy ! Inverting map ! Added new window around map position (10.8, 26.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071624 Jy ! Component: 100 - total flux cleaned = 0.00117267 Jy ! Component: 150 - total flux cleaned = 0.00155077 Jy ! Component: 200 - total flux cleaned = 0.00188559 Jy ! Total flux subtracted in 200 components = 0.00188559 Jy ! Clean residual min=-0.000821 max=0.000736 Jy/beam ! Clean residual mean=0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.150909 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 144 components and 0.150909 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.156 mas, bmaj=3.571 mas, bpa=0.001706 degrees ! Estimated noise=0.520815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000742014 Jy ! Component: 100 - total flux cleaned = 0.00106536 Jy ! Component: 150 - total flux cleaned = 0.00140558 Jy ! Component: 200 - total flux cleaned = 0.00173833 Jy ! Total flux subtracted in 200 components = 0.00173833 Jy ! Clean residual min=-0.000648 max=0.000680 Jy/beam ! Clean residual mean=0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.152647 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278145 Jy ! Component: 100 - total flux cleaned = 0.000499626 Jy ! Component: 150 - total flux cleaned = 0.000660819 Jy ! Component: 200 - total flux cleaned = 0.000757076 Jy ! Total flux subtracted in 200 components = 0.000757076 Jy ! Clean residual min=-0.000604 max=0.000657 Jy/beam ! Clean residual mean=0.000001 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.153404 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 205 components and 0.153404 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=2.077 mas, bpa=-2.176 degrees ! Estimated noise=0.417893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277651 Jy ! Component: 100 - total flux cleaned = 0.000440604 Jy ! Component: 150 - total flux cleaned = 0.0005731 Jy ! Component: 200 - total flux cleaned = 0.000644612 Jy ! Total flux subtracted in 200 components = 0.000644612 Jy ! Clean residual min=-0.000661 max=0.000642 Jy/beam ! Clean residual mean=0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.154049 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 228 components and 0.154049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053621Jy sigma=0.467483 ! Fit after self-cal, rms=0.053605Jy sigma=0.467412 wmodel J1058-0309_X_map.mod ! Writing 228 model components to file: J1058-0309_X_map.mod wobs J1058-0309_X_uvs.fits ! Writing UV FITS file: J1058-0309_X_uvs.fits wwins J1058-0309_X_map.win ! wwins: Wrote 14 windows to J1058-0309_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.90177e-05 Jy ! Component: 100 - total flux cleaned = -0.000131489 Jy ! Component: 150 - total flux cleaned = -0.000200098 Jy ! Component: 200 - total flux cleaned = -0.000277899 Jy ! Component: 250 - total flux cleaned = -0.000332344 Jy ! Component: 300 - total flux cleaned = -0.000364416 Jy ! Component: 350 - total flux cleaned = -0.000427273 Jy ! Component: 400 - total flux cleaned = -0.000509423 Jy ! Component: 450 - total flux cleaned = -0.000549828 Jy ! Component: 500 - total flux cleaned = -0.000599597 Jy ! Component: 550 - total flux cleaned = -0.000629157 Jy ! Component: 600 - total flux cleaned = -0.000667941 Jy ! Component: 650 - total flux cleaned = -0.00069673 Jy ! Component: 700 - total flux cleaned = -0.000734528 Jy ! Component: 750 - total flux cleaned = -0.000715885 Jy ! Component: 800 - total flux cleaned = -0.000762514 Jy ! Component: 850 - total flux cleaned = -0.000817533 Jy ! Component: 900 - total flux cleaned = -0.000826502 Jy ! Component: 950 - total flux cleaned = -0.000853563 Jy ! Component: 1000 - total flux cleaned = -0.000916084 Jy ! Component: 1050 - total flux cleaned = -0.000942564 Jy ! Component: 1100 - total flux cleaned = -0.000977569 Jy ! Component: 1150 - total flux cleaned = -0.00102096 Jy ! Component: 1200 - total flux cleaned = -0.00103821 Jy ! Component: 1250 - total flux cleaned = -0.00105542 Jy ! Component: 1300 - total flux cleaned = -0.00111466 Jy ! Component: 1350 - total flux cleaned = -0.0011735 Jy ! Component: 1400 - total flux cleaned = -0.00119 Jy ! Component: 1450 - total flux cleaned = -0.00121492 Jy ! Component: 1500 - total flux cleaned = -0.00128051 Jy ! Component: 1550 - total flux cleaned = -0.00131308 Jy ! Component: 1600 - total flux cleaned = -0.00134539 Jy ! Component: 1650 - total flux cleaned = -0.00136941 Jy ! Component: 1700 - total flux cleaned = -0.0014093 Jy ! Component: 1750 - total flux cleaned = -0.001441 Jy ! Component: 1800 - total flux cleaned = -0.00146461 Jy ! Component: 1850 - total flux cleaned = -0.00150364 Jy ! Component: 1900 - total flux cleaned = -0.00152694 Jy ! Component: 1950 - total flux cleaned = -0.00157306 Jy ! Component: 2000 - total flux cleaned = -0.00160368 Jy ! Component: 2050 - total flux cleaned = -0.00164166 Jy ! Component: 2100 - total flux cleaned = -0.00169439 Jy ! Component: 2150 - total flux cleaned = -0.00167938 Jy ! Component: 2200 - total flux cleaned = -0.00165714 Jy ! Component: 2250 - total flux cleaned = -0.00171633 Jy ! Component: 2300 - total flux cleaned = -0.00172372 Jy ! Component: 2350 - total flux cleaned = -0.0017456 Jy ! Component: 2400 - total flux cleaned = -0.00175288 Jy ! Component: 2450 - total flux cleaned = -0.00175288 Jy ! Component: 2500 - total flux cleaned = -0.00175291 Jy ! Component: 2550 - total flux cleaned = -0.00176723 Jy ! Component: 2600 - total flux cleaned = -0.00180986 Jy ! Component: 2650 - total flux cleaned = -0.001824 Jy ! Component: 2700 - total flux cleaned = -0.00180997 Jy ! Component: 2750 - total flux cleaned = -0.001817 Jy ! Component: 2800 - total flux cleaned = -0.00180308 Jy ! Component: 2850 - total flux cleaned = -0.00181008 Jy ! Component: 2900 - total flux cleaned = -0.00184449 Jy ! Component: 2950 - total flux cleaned = -0.00183082 Jy ! Component: 3000 - total flux cleaned = -0.0018376 Jy ! Component: 3050 - total flux cleaned = -0.00183757 Jy ! Component: 3100 - total flux cleaned = -0.00179712 Jy ! Component: 3150 - total flux cleaned = -0.00179711 Jy ! Component: 3200 - total flux cleaned = -0.00183718 Jy ! Component: 3250 - total flux cleaned = -0.00179733 Jy ! Component: 3300 - total flux cleaned = -0.00181716 Jy ! Component: 3350 - total flux cleaned = -0.00183691 Jy ! Component: 3400 - total flux cleaned = -0.0018369 Jy ! Component: 3450 - total flux cleaned = -0.00182379 Jy ! Component: 3500 - total flux cleaned = -0.00183032 Jy ! Component: 3550 - total flux cleaned = -0.0018368 Jy ! Component: 3600 - total flux cleaned = -0.00181111 Jy ! Component: 3650 - total flux cleaned = -0.00182393 Jy ! Component: 3700 - total flux cleaned = -0.00185582 Jy ! Component: 3750 - total flux cleaned = -0.00185584 Jy ! Component: 3800 - total flux cleaned = -0.0018558 Jy ! Component: 3850 - total flux cleaned = -0.0018558 Jy ! Component: 3900 - total flux cleaned = -0.00188709 Jy ! Component: 3950 - total flux cleaned = -0.00185595 Jy ! Component: 4000 - total flux cleaned = -0.00186836 Jy ! Component: 4050 - total flux cleaned = -0.00192396 Jy ! Total flux subtracted in 4096 components = -0.00190545 Jy ! Clean residual min=-0.000388 max=0.000424 Jy/beam ! Clean residual mean=0.000000 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.152143 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 546 components and 0.152143 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1058-0309_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8551 x 2.077 at -2.176 degrees (North through East) ! Clean map min=-0.00056214 max=0.055884 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1058-0309_X_map.fits wmodel /image_prod/ug002_uva//J1058-0309_X_map.mod ! Writing 546 model components to file: /image_prod/ug002_uva//J1058-0309_X_map.mod wobs /image_prod/ug002_uva//J1058-0309_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1058-0309_X_uvs.fits wwins /image_prod/ug002_uva//J1058-0309_X_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J1058-0309_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0558837 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000107769 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.578537 0.578537 1.15707 2.31415 4.62829 9.25659 18.5132 37.0263 74.0527 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 518.549 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1058-0309_X_dfm.log closed on Wed Mar 4 23:49:27 2020