! Started logfile: /image_prod/ug002_uva//J1058+0133_X_b_dfm.log on Wed Mar 4 23:48:10 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1058+0133_X_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1058+0133_X_b_uva.fits ! AN table 1: 21 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.806349 visibilities/baseline/integration-bin. ! Found source: J1058+0133 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 9144 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1058+0133_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.564432Jy sigma=7.721010 ! Fit after self-cal, rms=3.457720Jy sigma=5.760341 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6493 mas, bmaj=1.724 mas, bpa=-5.518 degrees ! Estimated noise=6.04873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21815 Jy ! Component: 100 - total flux cleaned = 3.92897 Jy ! Total flux subtracted in 100 components = 3.92897 Jy ! Clean residual min=-0.116444 max=0.238937 Jy/beam ! Clean residual mean=-0.000031 rms=0.023643 Jy/beam ! Combined flux in latest and established models = 3.92897 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 3.92897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.809487Jy sigma=1.221203 ! Fit after self-cal, rms=0.809213Jy sigma=1.221055 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.256879 Jy ! Component: 100 - total flux cleaned = 0.396127 Jy ! Total flux subtracted in 100 components = 0.396127 Jy ! Clean residual min=-0.091846 max=0.195276 Jy/beam ! Clean residual mean=-0.000015 rms=0.019777 Jy/beam ! Combined flux in latest and established models = 4.3251 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 4.3251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.614551Jy sigma=0.957239 ! Fit after self-cal, rms=0.613963Jy sigma=0.955404 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.188118 Jy ! Component: 100 - total flux cleaned = 0.292726 Jy ! Total flux subtracted in 100 components = 0.292726 Jy ! Clean residual min=-0.082222 max=0.143182 Jy/beam ! Clean residual mean=-0.000004 rms=0.016657 Jy/beam ! Combined flux in latest and established models = 4.61783 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 4.61783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.503061Jy sigma=0.795317 ! Fit after self-cal, rms=0.494859Jy sigma=0.777061 ! Inverting map ! Added new window around map position (1.4, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121979 Jy ! Component: 100 - total flux cleaned = 0.209102 Jy ! Total flux subtracted in 100 components = 0.209102 Jy ! Clean residual min=-0.077527 max=0.083832 Jy/beam ! Clean residual mean=0.000004 rms=0.014590 Jy/beam ! Combined flux in latest and established models = 4.82693 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 4.82693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.429283Jy sigma=0.683258 ! Fit after self-cal, rms=0.428271Jy sigma=0.681831 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8197 mas, bmaj=2.026 mas, bpa=-4.942 degrees ! Estimated noise=4.54784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129549 Jy ! Component: 100 - total flux cleaned = 0.21993 Jy ! Component: 150 - total flux cleaned = 0.288709 Jy ! Component: 200 - total flux cleaned = 0.342279 Jy ! Total flux subtracted in 200 components = 0.342279 Jy ! Clean residual min=-0.087859 max=0.099545 Jy/beam ! Clean residual mean=-0.000008 rms=0.018753 Jy/beam ! Combined flux in latest and established models = 5.16921 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 5.16921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.358501Jy sigma=0.600563 ! Fit after self-cal, rms=0.356862Jy sigma=0.597889 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8197 x 2.026 at -4.942 degrees (North through East) ! Clean map min=-0.083997 max=4.2053 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.06 KP 1.00 ! LA 0.97 MK 1.01 NL 1.06 OV 0.97 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.07 KP 1.00 ! LA 0.98 MK 1.01 NL 1.05 OV 0.98 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.09 KP 0.99 ! LA 0.97 MK 1.02 NL 1.04 OV 0.96 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.03 KP 0.99 ! LA 0.98 MK 1.01 NL 1.03 OV 1.00 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.06 KP 1.00 ! LA 0.97 MK 1.01 NL 1.03 OV 0.99 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.06 KP 1.00 ! LA 0.98 MK 1.01 NL 1.06 OV 0.97 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.04 KP 0.99 ! LA 0.99 MK 1.00 NL 1.04 OV 0.97 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.04 KP 0.99 ! LA 0.96 MK 1.00 NL 1.03 OV 0.97 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.05 KP 0.99 ! LA 0.96 MK 0.99 NL 1.03 OV 0.97 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.05 KP 0.99 ! LA 0.97 MK 0.99 NL 1.10 OV 0.97 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 0.98 ! LA 0.97 MK 1.01 NL 1.01 OV 0.97 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.04 KP 0.98 ! LA 0.97 MK 1.02 NL 1.02 OV 0.98 ! PT 0.93 SC 1.01 ! ! ! Fit before self-cal, rms=0.356862Jy sigma=0.597889 ! Fit after self-cal, rms=0.294704Jy sigma=0.493265 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8278 mas, bmaj=2.032 mas, bpa=-4.834 degrees ! Estimated noise=4.56417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.8, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0635964 Jy ! Component: 100 - total flux cleaned = 0.0765582 Jy ! Component: 150 - total flux cleaned = 0.0868522 Jy ! Component: 200 - total flux cleaned = 0.0954166 Jy ! Total flux subtracted in 200 components = 0.0954166 Jy ! Clean residual min=-0.062116 max=0.054623 Jy/beam ! Clean residual mean=0.000009 rms=0.012820 Jy/beam ! Combined flux in latest and established models = 5.26462 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 85 components and 5.26462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.263240Jy sigma=0.443744 ! Fit after self-cal, rms=0.261715Jy sigma=0.441643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.261715Jy sigma=0.441643 ! Fit after self-cal, rms=0.186118Jy sigma=0.291711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.827 mas, bmaj=2.034 mas, bpa=-4.89 degrees ! Estimated noise=4.55178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00972161 Jy ! Component: 100 - total flux cleaned = -0.00307073 Jy ! Component: 150 - total flux cleaned = 0.00348088 Jy ! Component: 200 - total flux cleaned = 0.0108364 Jy ! Total flux subtracted in 200 components = 0.0108364 Jy ! Clean residual min=-0.047892 max=0.033191 Jy/beam ! Clean residual mean=0.000005 rms=0.007053 Jy/beam ! Combined flux in latest and established models = 5.27546 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 5.27546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167096Jy sigma=0.261116 ! Fit after self-cal, rms=0.166268Jy sigma=0.260150 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104375 Jy ! Component: 100 - total flux cleaned = 0.0177673 Jy ! Component: 150 - total flux cleaned = 0.0229562 Jy ! Component: 200 - total flux cleaned = 0.028143 Jy ! Total flux subtracted in 200 components = 0.028143 Jy ! Clean residual min=-0.044795 max=0.028510 Jy/beam ! Clean residual mean=0.000006 rms=0.006711 Jy/beam ! Combined flux in latest and established models = 5.3036 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 115 components and 5.3036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160335Jy sigma=0.251732 ! Fit after self-cal, rms=0.159999Jy sigma=0.251357 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.159999Jy sigma=0.251357 ! Fit after self-cal, rms=0.150496Jy sigma=0.236550 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.034 mas, bpa=-4.918 degrees ! Estimated noise=4.54533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0213051 Jy ! Component: 100 - total flux cleaned = -0.0239251 Jy ! Component: 150 - total flux cleaned = -0.0212432 Jy ! Component: 200 - total flux cleaned = -0.017154 Jy ! Total flux subtracted in 200 components = -0.017154 Jy ! Clean residual min=-0.037988 max=0.025853 Jy/beam ! Clean residual mean=0.000002 rms=0.005588 Jy/beam ! Combined flux in latest and established models = 5.28645 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 5.28645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141110Jy sigma=0.220670 ! Fit after self-cal, rms=0.140677Jy sigma=0.220196 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376848 Jy ! Component: 100 - total flux cleaned = 0.00757987 Jy ! Component: 150 - total flux cleaned = 0.010572 Jy ! Component: 200 - total flux cleaned = 0.0125144 Jy ! Total flux subtracted in 200 components = 0.0125144 Jy ! Clean residual min=-0.036195 max=0.023451 Jy/beam ! Clean residual mean=0.000002 rms=0.005399 Jy/beam ! Combined flux in latest and established models = 5.29896 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 126 components and 5.29896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137648Jy sigma=0.215979 ! Fit after self-cal, rms=0.137525Jy sigma=0.215791 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137525Jy sigma=0.215791 ! Fit after self-cal, rms=0.132134Jy sigma=0.208535 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.08 mas, bmaj=3.262 mas, bpa=-1.937 degrees ! Estimated noise=6.37349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0114442 Jy ! Component: 100 - total flux cleaned = -0.00968634 Jy ! Component: 150 - total flux cleaned = -0.00755259 Jy ! Component: 200 - total flux cleaned = -0.00406398 Jy ! Total flux subtracted in 200 components = -0.00406398 Jy ! Clean residual min=-0.046425 max=0.029489 Jy/beam ! Clean residual mean=-0.000000 rms=0.008501 Jy/beam ! Combined flux in latest and established models = 5.2949 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 140 components and 5.2949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127629Jy sigma=0.203954 ! Fit after self-cal, rms=0.127518Jy sigma=0.203313 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106154 Jy ! Component: 100 - total flux cleaned = 0.00434746 Jy ! Component: 150 - total flux cleaned = 0.00633761 Jy ! Component: 200 - total flux cleaned = 0.00670317 Jy ! Total flux subtracted in 200 components = 0.00670317 Jy ! Clean residual min=-0.044155 max=0.028729 Jy/beam ! Clean residual mean=-0.000001 rms=0.008215 Jy/beam ! Combined flux in latest and established models = 5.3016 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 148 components and 5.3016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126921Jy sigma=0.203721 ! Fit after self-cal, rms=0.126767Jy sigma=0.203101 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.825 mas, bmaj=2.034 mas, bpa=-4.928 degrees ! Estimated noise=4.54104 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.825 x 2.034 at -4.928 degrees (North through East) ! Clean map min=-0.028097 max=4.2047 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126767Jy sigma=0.203101 ! Fit after self-cal, rms=0.121268Jy sigma=0.189868 ! Inverting map and beam ! Estimated beam: bmin=0.8248 mas, bmaj=2.033 mas, bpa=-4.912 degrees ! Estimated noise=4.53832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0201315 Jy ! Component: 100 - total flux cleaned = -0.0218411 Jy ! Component: 150 - total flux cleaned = -0.0232308 Jy ! Component: 200 - total flux cleaned = -0.0232192 Jy ! Total flux subtracted in 200 components = -0.0232192 Jy ! Clean residual min=-0.025075 max=0.020477 Jy/beam ! Clean residual mean=-0.000001 rms=0.004165 Jy/beam ! Combined flux in latest and established models = 5.27838 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 156 components and 5.27838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116321Jy sigma=0.180280 ! Fit after self-cal, rms=0.116167Jy sigma=0.180159 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000869897 Jy ! Component: 100 - total flux cleaned = -0.000874972 Jy ! Component: 150 - total flux cleaned = -0.000568754 Jy ! Component: 200 - total flux cleaned = 3.10029e-07 Jy ! Total flux subtracted in 200 components = 3.10029e-07 Jy ! Clean residual min=-0.024347 max=0.020019 Jy/beam ! Clean residual mean=-0.000001 rms=0.004092 Jy/beam ! Combined flux in latest and established models = 5.27838 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 163 components and 5.27838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114661Jy sigma=0.177383 ! Fit after self-cal, rms=0.114606Jy sigma=0.177316 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114606Jy sigma=0.177316 ! Fit after self-cal, rms=0.111193Jy sigma=0.173098 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6498 mas, bmaj=1.728 mas, bpa=-5.397 degrees ! Estimated noise=6.07564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21689 Jy ! Component: 100 - total flux cleaned = 3.92762 Jy ! Component: 150 - total flux cleaned = 4.2156 Jy ! Component: 200 - total flux cleaned = 4.40906 Jy ! Total flux subtracted in 200 components = 4.40906 Jy ! Clean residual min=-0.046025 max=0.105901 Jy/beam ! Clean residual mean=-0.000021 rms=0.010395 Jy/beam ! Combined flux in latest and established models = 4.40906 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 4.40906 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8241 mas, bmaj=2.033 mas, bpa=-4.907 degrees ! Estimated noise=4.53489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208651 Jy ! Component: 100 - total flux cleaned = 0.324193 Jy ! Component: 150 - total flux cleaned = 0.404715 Jy ! Component: 200 - total flux cleaned = 0.468573 Jy ! Total flux subtracted in 200 components = 0.468573 Jy ! Clean residual min=-0.031783 max=0.040880 Jy/beam ! Clean residual mean=-0.000027 rms=0.007301 Jy/beam ! Combined flux in latest and established models = 4.87764 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 4.87764 Jy ! Inverting map ! Added new window around map position (-1.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528149 Jy ! Component: 100 - total flux cleaned = 0.0967331 Jy ! Component: 150 - total flux cleaned = 0.133963 Jy ! Component: 200 - total flux cleaned = 0.166098 Jy ! Total flux subtracted in 200 components = 0.166098 Jy ! Clean residual min=-0.028207 max=0.029021 Jy/beam ! Clean residual mean=-0.000014 rms=0.005207 Jy/beam ! Combined flux in latest and established models = 5.04374 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 67 components and 5.04374 Jy ! Inverting map ! Added new window around map position (-8, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311969 Jy ! Component: 100 - total flux cleaned = 0.0568018 Jy ! Component: 150 - total flux cleaned = 0.0794234 Jy ! Component: 200 - total flux cleaned = 0.0995123 Jy ! Total flux subtracted in 200 components = 0.0995123 Jy ! Clean residual min=-0.024513 max=0.019207 Jy/beam ! Clean residual mean=-0.000008 rms=0.004180 Jy/beam ! Combined flux in latest and established models = 5.14325 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 100 components and 5.14325 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.081 mas, bmaj=3.26 mas, bpa=-1.788 degrees ! Estimated noise=6.37323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034835 Jy ! Component: 100 - total flux cleaned = 0.0609756 Jy ! Component: 150 - total flux cleaned = 0.0822031 Jy ! Component: 200 - total flux cleaned = 0.0984494 Jy ! Total flux subtracted in 200 components = 0.0984494 Jy ! Clean residual min=-0.031480 max=0.024430 Jy/beam ! Clean residual mean=-0.000006 rms=0.006394 Jy/beam ! Combined flux in latest and established models = 5.2417 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108837 Jy ! Component: 100 - total flux cleaned = 0.0194323 Jy ! Component: 150 - total flux cleaned = 0.0275386 Jy ! Component: 200 - total flux cleaned = 0.0347702 Jy ! Total flux subtracted in 200 components = 0.0347702 Jy ! Clean residual min=-0.028461 max=0.021798 Jy/beam ! Clean residual mean=-0.000002 rms=0.005909 Jy/beam ! Combined flux in latest and established models = 5.27647 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 179 components and 5.27647 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8241 mas, bmaj=2.033 mas, bpa=-4.907 degrees ! Estimated noise=4.53489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377261 Jy ! Component: 100 - total flux cleaned = 0.00680543 Jy ! Component: 150 - total flux cleaned = 0.0102414 Jy ! Component: 200 - total flux cleaned = 0.0133012 Jy ! Total flux subtracted in 200 components = 0.0133012 Jy ! Clean residual min=-0.020113 max=0.014534 Jy/beam ! Clean residual mean=0.000001 rms=0.003225 Jy/beam ! Combined flux in latest and established models = 5.28977 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 192 components and 5.28977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102003Jy sigma=0.158835 ! Fit after self-cal, rms=0.101113Jy sigma=0.156711 wmodel J1058+0133_X_b_map.mod ! Writing 192 model components to file: J1058+0133_X_b_map.mod wobs J1058+0133_X_b_uvs.fits ! Writing UV FITS file: J1058+0133_X_b_uvs.fits wwins J1058+0133_X_b_map.win ! wwins: Wrote 6 windows to J1058+0133_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00646312 Jy ! Component: 100 - total flux cleaned = -0.00994781 Jy ! Component: 150 - total flux cleaned = -0.012634 Jy ! Component: 200 - total flux cleaned = -0.0128702 Jy ! Component: 250 - total flux cleaned = -0.0122305 Jy ! Component: 300 - total flux cleaned = -0.0113984 Jy ! Component: 350 - total flux cleaned = -0.0107951 Jy ! Component: 400 - total flux cleaned = -0.00963216 Jy ! Component: 450 - total flux cleaned = -0.00944674 Jy ! Component: 500 - total flux cleaned = -0.00834868 Jy ! Component: 550 - total flux cleaned = -0.00781752 Jy ! Component: 600 - total flux cleaned = -0.00729977 Jy ! Component: 650 - total flux cleaned = -0.00645857 Jy ! Component: 700 - total flux cleaned = -0.00629341 Jy ! Component: 750 - total flux cleaned = -0.00597387 Jy ! Component: 800 - total flux cleaned = -0.00582137 Jy ! Component: 850 - total flux cleaned = -0.00628165 Jy ! Component: 900 - total flux cleaned = -0.00597996 Jy ! Component: 950 - total flux cleaned = -0.0058325 Jy ! Component: 1000 - total flux cleaned = -0.0056882 Jy ! Component: 1050 - total flux cleaned = -0.00511588 Jy ! Component: 1100 - total flux cleaned = -0.0041367 Jy ! Component: 1150 - total flux cleaned = -0.00400161 Jy ! Component: 1200 - total flux cleaned = -0.00359435 Jy ! Component: 1250 - total flux cleaned = -0.00279731 Jy ! Component: 1300 - total flux cleaned = -0.00201617 Jy ! Component: 1350 - total flux cleaned = -0.00176073 Jy ! Component: 1400 - total flux cleaned = -0.00150431 Jy ! Component: 1450 - total flux cleaned = -0.00075496 Jy ! Component: 1500 - total flux cleaned = -0.000509396 Jy ! Component: 1550 - total flux cleaned = 0.000577849 Jy ! Component: 1600 - total flux cleaned = 0.000935333 Jy ! Component: 1650 - total flux cleaned = 0.00128793 Jy ! Component: 1700 - total flux cleaned = 0.00174788 Jy ! Component: 1750 - total flux cleaned = 0.00197407 Jy ! Component: 1800 - total flux cleaned = 0.00231071 Jy ! Component: 1850 - total flux cleaned = 0.00264173 Jy ! Component: 1900 - total flux cleaned = 0.0026416 Jy ! Component: 1950 - total flux cleaned = 0.00307488 Jy ! Component: 2000 - total flux cleaned = 0.00317935 Jy ! Component: 2050 - total flux cleaned = 0.00318076 Jy ! Component: 2100 - total flux cleaned = 0.00359511 Jy ! Component: 2150 - total flux cleaned = 0.00339072 Jy ! Component: 2200 - total flux cleaned = 0.00399821 Jy ! Component: 2250 - total flux cleaned = 0.00429924 Jy ! Component: 2300 - total flux cleaned = 0.00459422 Jy ! Component: 2350 - total flux cleaned = 0.00469021 Jy ! Component: 2400 - total flux cleaned = 0.00488426 Jy ! Component: 2450 - total flux cleaned = 0.00535912 Jy ! Component: 2500 - total flux cleaned = 0.00489113 Jy ! Component: 2550 - total flux cleaned = 0.00516769 Jy ! Component: 2600 - total flux cleaned = 0.00517012 Jy ! Component: 2650 - total flux cleaned = 0.005079 Jy ! Component: 2700 - total flux cleaned = 0.00498994 Jy ! Component: 2750 - total flux cleaned = 0.00525456 Jy ! Component: 2800 - total flux cleaned = 0.00516786 Jy ! Component: 2850 - total flux cleaned = 0.00525383 Jy ! Component: 2900 - total flux cleaned = 0.00499712 Jy ! Component: 2950 - total flux cleaned = 0.00491238 Jy ! Component: 3000 - total flux cleaned = 0.00499859 Jy ! Component: 3050 - total flux cleaned = 0.00524784 Jy ! Component: 3100 - total flux cleaned = 0.00541164 Jy ! Component: 3150 - total flux cleaned = 0.0054119 Jy ! Component: 3200 - total flux cleaned = 0.00557223 Jy ! Component: 3250 - total flux cleaned = 0.00541496 Jy ! Component: 3300 - total flux cleaned = 0.00580911 Jy ! Component: 3350 - total flux cleaned = 0.00596515 Jy ! Component: 3400 - total flux cleaned = 0.0062739 Jy ! Component: 3450 - total flux cleaned = 0.00657997 Jy ! Component: 3500 - total flux cleaned = 0.00665493 Jy ! Component: 3550 - total flux cleaned = 0.00710363 Jy ! Component: 3600 - total flux cleaned = 0.00725191 Jy ! Component: 3650 - total flux cleaned = 0.00747294 Jy ! Component: 3700 - total flux cleaned = 0.00754513 Jy ! Component: 3750 - total flux cleaned = 0.00790652 Jy ! Component: 3800 - total flux cleaned = 0.00826393 Jy ! Component: 3850 - total flux cleaned = 0.00826415 Jy ! Component: 3900 - total flux cleaned = 0.00854599 Jy ! Component: 3950 - total flux cleaned = 0.00861487 Jy ! Component: 4000 - total flux cleaned = 0.00875235 Jy ! Component: 4050 - total flux cleaned = 0.00929951 Jy ! Total flux subtracted in 4096 components = 0.00970488 Jy ! Clean residual min=-0.003987 max=0.003387 Jy/beam ! Clean residual mean=0.000002 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 5.29948 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 531 components and 5.29948 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1058+0133_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8241 x 2.033 at -4.907 degrees (North through East) ! Clean map min=-0.013416 max=4.2236 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1058+0133_X_b_map.fits wmodel /image_prod/ug002_uva//J1058+0133_X_b_map.mod ! Writing 531 model components to file: /image_prod/ug002_uva//J1058+0133_X_b_map.mod wobs /image_prod/ug002_uva//J1058+0133_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1058+0133_X_b_uvs.fits wwins /image_prod/ug002_uva//J1058+0133_X_b_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1058+0133_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 4.22357 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00126383 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0897696 0.0897696 0.179539 0.359078 0.718157 1.43631 2.87263 5.74525 11.4905 22.981 45.962 91.9241 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.223 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3341.89 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1058+0133_X_b_dfm.log closed on Wed Mar 4 23:48:15 2020