! Started logfile: /image_prod/ug002_uva//J1054+3928_X_dfm.log on Wed Mar  4 23:46:48 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1054+3928_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1054+3928_X_uva.fits
! AN table 1: 81 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.702606 visibilities/baseline/integration-bin.
! Found source: J1054+3928
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30732 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1054+3928_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006178Jy  sigma=9.114349
! Fit after  self-cal, rms=0.891563Jy  sigma=8.075474
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7079 mas, bmaj=1.245 mas, bpa=-8.56 degrees
! Estimated noise=0.931609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0797244 Jy
! Component: 100  -  total flux cleaned = 0.100923 Jy
! Total flux subtracted in 100 components = 0.100923 Jy
! Clean residual min=-0.004510 max=0.009402 Jy/beam
! Clean residual mean=0.000004 rms=0.000958 Jy/beam
! Combined flux in latest and established models = 0.100923 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.100923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060444Jy  sigma=0.517442
! Fit after  self-cal, rms=0.060335Jy  sigma=0.516654
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107873 Jy
! Component: 100  -  total flux cleaned = 0.016684 Jy
! Total flux subtracted in 100 components = 0.016684 Jy
! Clean residual min=-0.003244 max=0.004548 Jy/beam
! Clean residual mean=0.000001 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.117607 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.117607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057532Jy  sigma=0.488771
! Fit after  self-cal, rms=0.057516Jy  sigma=0.488586
! Inverting map 
! Added new window around map position (1.4, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478492 Jy
! Component: 100  -  total flux cleaned = 0.008155 Jy
! Total flux subtracted in 100 components = 0.008155 Jy
! Clean residual min=-0.002930 max=0.003847 Jy/beam
! Clean residual mean=-0.000000 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.125762 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.125762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056872Jy  sigma=0.482156
! Fit after  self-cal, rms=0.056837Jy  sigma=0.481810
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9407 mas, bmaj=1.559 mas, bpa=-9.417 degrees
! Estimated noise=0.451912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452511 Jy
! Component: 100  -  total flux cleaned = 0.00733043 Jy
! Component: 150  -  total flux cleaned = 0.00923173 Jy
! Component: 200  -  total flux cleaned = 0.010575 Jy
! Total flux subtracted in 200 components = 0.010575 Jy
! Clean residual min=-0.002402 max=0.003330 Jy/beam
! Clean residual mean=-0.000005 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.136337 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 37 components and 0.136337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056437Jy  sigma=0.477988
! Fit after  self-cal, rms=0.056417Jy  sigma=0.477761
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9407 x 1.559 at -9.417 degrees (North through East)
! Clean map  min=-0.0022743  max=0.10748 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.00     HN        0.98     KP        1.06     
!   LA        1.05     MK        1.01     NL        1.11     OV        1.00     
!   PT        0.91     SC        1.14     
! 
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.98     HN        0.95     KP        1.07     
!   LA        1.02     MK        0.95     NL        1.09     OV        0.96     
!   PT        0.97     SC        1.09     
! 
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.99     HN        0.97     KP        1.04     
!   LA        0.99     MK        1.00     NL        1.10     OV        0.97     
!   PT        0.94     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.99     KP        1.01     
!   LA        1.04     MK        1.02     NL        1.04     OV        0.99     
!   PT        0.93     SC        1.12     
! 
! 
! Correcting IF 5.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.03     HN        0.98     KP        1.02     
!   LA        0.97     MK        0.98     NL        1.10     OV        0.98     
!   PT        0.89     SC        1.16     
! 
! 
! Correcting IF 6.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.98     HN        0.95     KP        1.04     
!   LA        0.96     MK        0.96     NL        1.11     OV        0.98     
!   PT        0.92     SC        1.12     
! 
! 
! Correcting IF 7.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.01     HN        0.91     KP        1.03     
!   LA        0.98     MK        1.04     NL        1.10     OV        0.95     
!   PT        0.91     SC        1.12     
! 
! 
! Correcting IF 8.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.00     HN        0.96     KP        1.04     
!   LA        1.02     MK        0.96     NL        1.05     OV        1.00     
!   PT        0.90     SC        1.07     
! 
! 
! Correcting IF 9.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     HN        1.03     KP        1.02     
!   LA        1.00     MK        0.96     NL        1.08     OV        0.95     
!   PT        0.91     SC        1.18     
! 
! 
! Correcting IF 10.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        0.97     KP        1.05     
!   LA        1.00     MK        0.99     NL        1.07     OV        1.01     
!   PT        0.90     SC        1.11     
! 
! 
! Correcting IF 11.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.96     KP        1.02     
!   LA        0.99     MK        0.96     NL        1.08     OV        0.96     
!   PT        0.93     SC        1.10     
! 
! 
! Correcting IF 12.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.96     HN        0.98     KP        1.06     
!   LA        0.98     MK        1.04     NL        1.06     OV        0.94     
!   PT        0.89     SC        1.13     
! 
! 
! Fit before self-cal, rms=0.056417Jy  sigma=0.477761
! Fit after  self-cal, rms=0.055199Jy  sigma=0.471155
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9428 mas, bmaj=1.563 mas, bpa=-10.54 degrees
! Estimated noise=0.453409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000822617 Jy
! Component: 100  -  total flux cleaned = -0.00118272 Jy
! Component: 150  -  total flux cleaned = -0.00146365 Jy
! Component: 200  -  total flux cleaned = -0.00162577 Jy
! Total flux subtracted in 200 components = -0.00162577 Jy
! Clean residual min=-0.001391 max=0.001595 Jy/beam
! Clean residual mean=0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.134711 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 51 components and 0.134711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055155Jy  sigma=0.470836
! Fit after  self-cal, rms=0.055168Jy  sigma=0.470712
! Inverting map 
! Added new window around map position (-0.2, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123521 Jy
! Component: 100  -  total flux cleaned = 0.00151174 Jy
! Component: 150  -  total flux cleaned = 0.00154451 Jy
! Component: 200  -  total flux cleaned = 0.00148772 Jy
! Total flux subtracted in 200 components = 0.00148772 Jy
! Clean residual min=-0.001256 max=0.001505 Jy/beam
! Clean residual mean=0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.136199 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.136199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055106Jy  sigma=0.470288
! Fit after  self-cal, rms=0.055103Jy  sigma=0.470261
! Inverting map 
! Added new window around map position (-0.2, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000377822 Jy
! Component: 100  -  total flux cleaned = 0.000306395 Jy
! Component: 150  -  total flux cleaned = 0.000248703 Jy
! Component: 200  -  total flux cleaned = 0.000168837 Jy
! Total flux subtracted in 200 components = 0.000168837 Jy
! Clean residual min=-0.001154 max=0.001448 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.136368 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 77 components and 0.136368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055051Jy  sigma=0.469872
! Fit after  self-cal, rms=0.055050Jy  sigma=0.469856
! Inverting map 
! Added new window around map position (-5.8, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000614454 Jy
! Component: 100  -  total flux cleaned = 0.000703312 Jy
! Component: 150  -  total flux cleaned = 0.000702893 Jy
! Component: 200  -  total flux cleaned = 0.000727784 Jy
! Total flux subtracted in 200 components = 0.000727784 Jy
! Clean residual min=-0.001124 max=0.001121 Jy/beam
! Clean residual mean=0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.137095 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 0.137095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055006Jy  sigma=0.469545
! Fit after  self-cal, rms=0.055004Jy  sigma=0.469524
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055004Jy  sigma=0.469524
! Fit after  self-cal, rms=0.055657Jy  sigma=0.467578
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9401 mas, bmaj=1.556 mas, bpa=-10.19 degrees
! Estimated noise=0.4527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000601241 Jy
! Component: 100  -  total flux cleaned = -0.000671624 Jy
! Component: 150  -  total flux cleaned = -0.000746517 Jy
! Component: 200  -  total flux cleaned = -0.000779362 Jy
! Total flux subtracted in 200 components = -0.000779362 Jy
! Clean residual min=-0.000840 max=0.000790 Jy/beam
! Clean residual mean=0.000001 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.136316 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 101 components and 0.136316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055639Jy  sigma=0.467421
! Fit after  self-cal, rms=0.055656Jy  sigma=0.467388
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117229 Jy
! Component: 100  -  total flux cleaned = -0.000204782 Jy
! Component: 150  -  total flux cleaned = -0.000231013 Jy
! Component: 200  -  total flux cleaned = -0.000269218 Jy
! Total flux subtracted in 200 components = -0.000269218 Jy
! Clean residual min=-0.000838 max=0.000789 Jy/beam
! Clean residual mean=0.000001 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.136047 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 110 components and 0.136047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055650Jy  sigma=0.467327
! Fit after  self-cal, rms=0.055649Jy  sigma=0.467325
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055649Jy  sigma=0.467325
! Fit after  self-cal, rms=0.055699Jy  sigma=0.467297
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9394 mas, bmaj=1.555 mas, bpa=-10.24 degrees
! Estimated noise=0.452391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000329604 Jy
! Component: 100  -  total flux cleaned = -0.000398175 Jy
! Component: 150  -  total flux cleaned = -0.000460722 Jy
! Component: 200  -  total flux cleaned = -0.000495163 Jy
! Total flux subtracted in 200 components = -0.000495163 Jy
! Clean residual min=-0.000826 max=0.000768 Jy/beam
! Clean residual mean=0.000000 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.135552 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 116 components and 0.135552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055692Jy  sigma=0.467233
! Fit after  self-cal, rms=0.055694Jy  sigma=0.467230
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.3882e-05 Jy
! Component: 100  -  total flux cleaned = -9.75186e-05 Jy
! Component: 150  -  total flux cleaned = -0.000138973 Jy
! Component: 200  -  total flux cleaned = -0.000149063 Jy
! Total flux subtracted in 200 components = -0.000149063 Jy
! Clean residual min=-0.000827 max=0.000775 Jy/beam
! Clean residual mean=0.000000 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.135403 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 125 components and 0.135403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055690Jy  sigma=0.467197
! Fit after  self-cal, rms=0.055690Jy  sigma=0.467196
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055690Jy  sigma=0.467196
! Fit after  self-cal, rms=0.055701Jy  sigma=0.467185
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=2.507 mas, bpa=-11.39 degrees
! Estimated noise=0.565967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.05579e-05 Jy
! Component: 100  -  total flux cleaned = 0.000130805 Jy
! Component: 150  -  total flux cleaned = 0.000174093 Jy
! Component: 200  -  total flux cleaned = 0.000204926 Jy
! Total flux subtracted in 200 components = 0.000204926 Jy
! Clean residual min=-0.000936 max=0.000980 Jy/beam
! Clean residual mean=0.000001 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.135607 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 142 components and 0.135608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055700Jy  sigma=0.467173
! Fit after  self-cal, rms=0.055700Jy  sigma=0.467174
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (49.2, 11.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000687382 Jy
! Component: 100  -  total flux cleaned = 0.000731112 Jy
! Component: 150  -  total flux cleaned = 0.000808085 Jy
! Component: 200  -  total flux cleaned = 0.000898885 Jy
! Total flux subtracted in 200 components = 0.000898885 Jy
! Clean residual min=-0.000828 max=0.000773 Jy/beam
! Clean residual mean=-0.000000 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.136506 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 164 components and 0.136506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055690Jy  sigma=0.467057
! Fit after  self-cal, rms=0.055689Jy  sigma=0.467050
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.939 mas, bmaj=1.555 mas, bpa=-10.27 degrees
! Estimated noise=0.452168 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.939 x 1.555 at -10.27 degrees (North through East)
! Clean map  min=-0.0009179  max=0.10651 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7119 mas, bmaj=1.25 mas, bpa=-9.246 degrees
! Estimated noise=0.934444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0796123 Jy
! Component: 100  -  total flux cleaned = 0.101482 Jy
! Component: 150  -  total flux cleaned = 0.112137 Jy
! Component: 200  -  total flux cleaned = 0.117786 Jy
! Total flux subtracted in 200 components = 0.117786 Jy
! Clean residual min=-0.002350 max=0.002907 Jy/beam
! Clean residual mean=0.000002 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.117786 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.117786 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.939 mas, bmaj=1.555 mas, bpa=-10.27 degrees
! Estimated noise=0.452168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00550699 Jy
! Component: 100  -  total flux cleaned = 0.00879017 Jy
! Component: 150  -  total flux cleaned = 0.0110119 Jy
! Component: 200  -  total flux cleaned = 0.0126007 Jy
! Total flux subtracted in 200 components = 0.0126007 Jy
! Clean residual min=-0.001144 max=0.001069 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.130387 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 36 components and 0.130387 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=2.507 mas, bpa=-11.39 degrees
! Estimated noise=0.565967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190365 Jy
! Component: 100  -  total flux cleaned = 0.0027535 Jy
! Component: 150  -  total flux cleaned = 0.00308275 Jy
! Component: 200  -  total flux cleaned = 0.00339366 Jy
! Total flux subtracted in 200 components = 0.00339366 Jy
! Clean residual min=-0.001111 max=0.000830 Jy/beam
! Clean residual mean=0.000000 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.133781 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000384435 Jy
! Component: 100  -  total flux cleaned = 0.00070168 Jy
! Component: 150  -  total flux cleaned = 0.000985658 Jy
! Component: 200  -  total flux cleaned = 0.00124133 Jy
! Total flux subtracted in 200 components = 0.00124133 Jy
! Clean residual min=-0.000967 max=0.000817 Jy/beam
! Clean residual mean=0.000000 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.135022 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 90 components and 0.135022 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.939 mas, bmaj=1.555 mas, bpa=-10.27 degrees
! Estimated noise=0.452168 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000341543 Jy
! Component: 100  -  total flux cleaned = 0.000525251 Jy
! Component: 150  -  total flux cleaned = 0.000596545 Jy
! Component: 200  -  total flux cleaned = 0.000727972 Jy
! Total flux subtracted in 200 components = 0.000727972 Jy
! Clean residual min=-0.000835 max=0.000794 Jy/beam
! Clean residual mean=-0.000000 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.13575 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 114 components and 0.13575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055711Jy  sigma=0.467250
! Fit after  self-cal, rms=0.055706Jy  sigma=0.467212
wmodel J1054+3928_X_map.mod
! Writing 114 model components to file: J1054+3928_X_map.mod
wobs   J1054+3928_X_uvs.fits
! Writing UV FITS file: J1054+3928_X_uvs.fits
wwins  J1054+3928_X_map.win
! wwins: Wrote 6 windows to J1054+3928_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000188914 Jy
! Component: 100  -  total flux cleaned = -0.000203839 Jy
! Component: 150  -  total flux cleaned = -0.000218012 Jy
! Component: 200  -  total flux cleaned = -0.000191788 Jy
! Component: 250  -  total flux cleaned = -0.000217617 Jy
! Component: 300  -  total flux cleaned = -0.000179126 Jy
! Component: 350  -  total flux cleaned = -0.00014156 Jy
! Component: 400  -  total flux cleaned = -0.000153738 Jy
! Component: 450  -  total flux cleaned = -0.000105293 Jy
! Component: 500  -  total flux cleaned = -8.15651e-05 Jy
! Component: 550  -  total flux cleaned = -4.63024e-05 Jy
! Component: 600  -  total flux cleaned = -3.46711e-05 Jy
! Component: 650  -  total flux cleaned = -2.31934e-05 Jy
! Component: 700  -  total flux cleaned = -6.82519e-05 Jy
! Component: 750  -  total flux cleaned = -1.01015e-06 Jy
! Component: 800  -  total flux cleaned = 9.87434e-06 Jy
! Component: 850  -  total flux cleaned = 2.08361e-05 Jy
! Component: 900  -  total flux cleaned = 9.96441e-06 Jy
! Component: 950  -  total flux cleaned = -1.15517e-05 Jy
! Component: 1000  -  total flux cleaned = -2.22092e-05 Jy
! Component: 1050  -  total flux cleaned = -2.22965e-05 Jy
! Component: 1100  -  total flux cleaned = -4.30906e-05 Jy
! Component: 1150  -  total flux cleaned = -2.23179e-05 Jy
! Component: 1200  -  total flux cleaned = -1.2007e-05 Jy
! Component: 1250  -  total flux cleaned = -1.18486e-05 Jy
! Component: 1300  -  total flux cleaned = -1.18971e-05 Jy
! Component: 1350  -  total flux cleaned = 8.03455e-06 Jy
! Component: 1400  -  total flux cleaned = -3.15719e-05 Jy
! Component: 1450  -  total flux cleaned = -1.17415e-05 Jy
! Component: 1500  -  total flux cleaned = 7.707e-06 Jy
! Component: 1550  -  total flux cleaned = -3.09155e-05 Jy
! Component: 1600  -  total flux cleaned = 2.65998e-05 Jy
! Component: 1650  -  total flux cleaned = -1.96605e-06 Jy
! Component: 1700  -  total flux cleaned = 2.64128e-05 Jy
! Component: 1750  -  total flux cleaned = 4.51464e-05 Jy
! Component: 1800  -  total flux cleaned = 1.74062e-05 Jy
! Component: 1850  -  total flux cleaned = 4.5066e-05 Jy
! Component: 1900  -  total flux cleaned = 6.32737e-05 Jy
! Component: 1950  -  total flux cleaned = 3.59382e-05 Jy
! Component: 2000  -  total flux cleaned = -9.41682e-08 Jy
! Component: 2050  -  total flux cleaned = -8.80368e-08 Jy
! Component: 2100  -  total flux cleaned = -1.78804e-05 Jy
! Component: 2150  -  total flux cleaned = -1.78883e-05 Jy
! Component: 2200  -  total flux cleaned = -5.30334e-05 Jy
! Component: 2250  -  total flux cleaned = -6.17485e-05 Jy
! Component: 2300  -  total flux cleaned = -7.03962e-05 Jy
! Component: 2350  -  total flux cleaned = -7.049e-05 Jy
! Component: 2400  -  total flux cleaned = -9.6124e-05 Jy
! Component: 2450  -  total flux cleaned = -0.000138602 Jy
! Component: 2500  -  total flux cleaned = -0.000147051 Jy
! Component: 2550  -  total flux cleaned = -0.000189066 Jy
! Component: 2600  -  total flux cleaned = -0.000222548 Jy
! Component: 2650  -  total flux cleaned = -0.000239114 Jy
! Component: 2700  -  total flux cleaned = -0.000230824 Jy
! Component: 2750  -  total flux cleaned = -0.000280103 Jy
! Component: 2800  -  total flux cleaned = -0.000271928 Jy
! Component: 2850  -  total flux cleaned = -0.000280121 Jy
! Component: 2900  -  total flux cleaned = -0.000320411 Jy
! Component: 2950  -  total flux cleaned = -0.000320502 Jy
! Component: 3000  -  total flux cleaned = -0.000368407 Jy
! Component: 3050  -  total flux cleaned = -0.000360434 Jy
! Component: 3100  -  total flux cleaned = -0.000407833 Jy
! Component: 3150  -  total flux cleaned = -0.00043923 Jy
! Component: 3200  -  total flux cleaned = -0.000431388 Jy
! Component: 3250  -  total flux cleaned = -0.000423639 Jy
! Component: 3300  -  total flux cleaned = -0.000446835 Jy
! Component: 3350  -  total flux cleaned = -0.00043147 Jy
! Component: 3400  -  total flux cleaned = -0.000500337 Jy
! Component: 3450  -  total flux cleaned = -0.00047746 Jy
! Component: 3500  -  total flux cleaned = -0.000485023 Jy
! Component: 3550  -  total flux cleaned = -0.00050761 Jy
! Component: 3600  -  total flux cleaned = -0.000507644 Jy
! Component: 3650  -  total flux cleaned = -0.000507675 Jy
! Component: 3700  -  total flux cleaned = -0.000477957 Jy
! Component: 3750  -  total flux cleaned = -0.000492707 Jy
! Component: 3800  -  total flux cleaned = -0.000514805 Jy
! Component: 3850  -  total flux cleaned = -0.00052945 Jy
! Component: 3900  -  total flux cleaned = -0.000529416 Jy
! Component: 3950  -  total flux cleaned = -0.000522193 Jy
! Component: 4000  -  total flux cleaned = -0.000543834 Jy
! Component: 4050  -  total flux cleaned = -0.000558215 Jy
! Total flux subtracted in 4096 components = -0.000543892 Jy
! Clean residual min=-0.000424 max=0.000403 Jy/beam
! Clean residual mean=-0.000001 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.135206 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 427 components and 0.135206 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1054+3928_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.939 x 1.555 at -10.27 degrees (North through East)
! Clean map  min=-0.0007727  max=0.1066 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1054+3928_X_map.fits
wmodel /image_prod/ug002_uva//J1054+3928_X_map.mod
! Writing 427 model components to file: /image_prod/ug002_uva//J1054+3928_X_map.mod
wobs   /image_prod/ug002_uva//J1054+3928_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1054+3928_X_uvs.fits
wwins  /image_prod/ug002_uva//J1054+3928_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1054+3928_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.1066 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000120529 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.339202 0.339202 0.678403 1.35681 2.71361 5.42723 10.8545 21.7089 43.4178 86.8356
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  884.429 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1054+3928_X_dfm.log closed on Wed Mar  4 23:46:53 2020