! Started logfile: /image_prod/ug002_uva//J1044+0655_S_b_dfm.log on Wed Mar  4 23:41:50 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1044+0655_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1044+0655_S_b_uva.fits
! AN table 1: 21 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.907407 visibilities/baseline/integration-bin.
! Found source: J1044+0655
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2058 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1044+0655_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017524Jy  sigma=8.344212
! Fit after  self-cal, rms=0.838674Jy  sigma=6.824352
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.877 mas, bmaj=7.285 mas, bpa=-0.6232 degrees
! Estimated noise=2.36796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126095 Jy
! Component: 100  -  total flux cleaned = 0.157166 Jy
! Total flux subtracted in 100 components = 0.157166 Jy
! Clean residual min=-0.006831 max=0.012059 Jy/beam
! Clean residual mean=-0.000032 rms=0.001933 Jy/beam
! Combined flux in latest and established models = 0.157166 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.157166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074266Jy  sigma=0.532561
! Fit after  self-cal, rms=0.074251Jy  sigma=0.532251
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132585 Jy
! Component: 100  -  total flux cleaned = 0.0206604 Jy
! Total flux subtracted in 100 components = 0.0206604 Jy
! Clean residual min=-0.006293 max=0.009811 Jy/beam
! Clean residual mean=-0.000022 rms=0.001574 Jy/beam
! Combined flux in latest and established models = 0.177827 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 24 components and 0.177827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071645Jy  sigma=0.497449
! Fit after  self-cal, rms=0.071658Jy  sigma=0.497173
! Inverting map 
! Added new window around map position (5.5, -7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00874082 Jy
! Component: 100  -  total flux cleaned = 0.0138438 Jy
! Total flux subtracted in 100 components = 0.0138438 Jy
! Clean residual min=-0.005676 max=0.006405 Jy/beam
! Clean residual mean=-0.000014 rms=0.001401 Jy/beam
! Combined flux in latest and established models = 0.191671 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.191671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070440Jy  sigma=0.483668
! Fit after  self-cal, rms=0.070331Jy  sigma=0.482937
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.343 mas, bmaj=8.04 mas, bpa=-1.255 degrees
! Estimated noise=1.97061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00552831 Jy
! Component: 100  -  total flux cleaned = 0.00901282 Jy
! Component: 150  -  total flux cleaned = 0.0110362 Jy
! Component: 200  -  total flux cleaned = 0.0116916 Jy
! Total flux subtracted in 200 components = 0.0116916 Jy
! Clean residual min=-0.004582 max=0.005838 Jy/beam
! Clean residual mean=-0.000007 rms=0.001251 Jy/beam
! Combined flux in latest and established models = 0.203362 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 66 components and 0.203362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069825Jy  sigma=0.478141
! Fit after  self-cal, rms=0.069804Jy  sigma=0.477919
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.343 x 8.04 at -1.255 degrees (North through East)
! Clean map  min=-0.0044843  max=0.16197 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.99     KP        1.03     
!   LA        0.99     MK        1.03     OV        0.98     PT        1.01     
!   SC        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.29     FD        1.01     HN        0.96     KP        0.97     
!   LA        0.99     MK        1.00     OV        0.96     PT        1.01     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.99     KP        0.96     
!   LA        1.00     MK        1.01     OV        0.98     PT        0.97     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.069804Jy  sigma=0.477919
! Fit after  self-cal, rms=0.070628Jy  sigma=0.470819
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=8.082 mas, bpa=-1.083 degrees
! Estimated noise=1.96583 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266759 Jy
! Component: 100  -  total flux cleaned = 0.000146609 Jy
! Component: 150  -  total flux cleaned = 3.69434e-05 Jy
! Component: 200  -  total flux cleaned = -6.13127e-05 Jy
! Total flux subtracted in 200 components = -6.13127e-05 Jy
! Clean residual min=-0.004525 max=0.004946 Jy/beam
! Clean residual mean=-0.000005 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.203301 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 76 components and 0.203301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070510Jy  sigma=0.470139
! Fit after  self-cal, rms=0.070539Jy  sigma=0.470033
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070539Jy  sigma=0.470033
! Fit after  self-cal, rms=0.076942Jy  sigma=0.456647
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.331 mas, bmaj=8.103 mas, bpa=-1.197 degrees
! Estimated noise=1.97625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000413839 Jy
! Component: 100  -  total flux cleaned = -0.000462388 Jy
! Component: 150  -  total flux cleaned = -0.0005046 Jy
! Component: 200  -  total flux cleaned = -0.000542357 Jy
! Total flux subtracted in 200 components = -0.000542357 Jy
! Clean residual min=-0.003507 max=0.003806 Jy/beam
! Clean residual mean=-0.000002 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.202759 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 90 components and 0.202759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076858Jy  sigma=0.456151
! Fit after  self-cal, rms=0.076938Jy  sigma=0.456048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144268 Jy
! Component: 100  -  total flux cleaned = -0.000179406 Jy
! Component: 150  -  total flux cleaned = -0.00021098 Jy
! Component: 200  -  total flux cleaned = -0.000238343 Jy
! Total flux subtracted in 200 components = -0.000238343 Jy
! Clean residual min=-0.003505 max=0.003745 Jy/beam
! Clean residual mean=-0.000002 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.20252 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 98 components and 0.20252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076899Jy  sigma=0.455822
! Fit after  self-cal, rms=0.076894Jy  sigma=0.455807
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076894Jy  sigma=0.455807
! Fit after  self-cal, rms=0.077836Jy  sigma=0.454253
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.331 mas, bmaj=8.105 mas, bpa=-1.308 degrees
! Estimated noise=1.97517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000555808 Jy
! Component: 100  -  total flux cleaned = -0.000646575 Jy
! Component: 150  -  total flux cleaned = -0.000671319 Jy
! Component: 200  -  total flux cleaned = -0.00069503 Jy
! Total flux subtracted in 200 components = -0.00069503 Jy
! Clean residual min=-0.003361 max=0.003815 Jy/beam
! Clean residual mean=-0.000002 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.201825 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 106 components and 0.201825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077799Jy  sigma=0.454092
! Fit after  self-cal, rms=0.077805Jy  sigma=0.454073
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150327 Jy
! Component: 100  -  total flux cleaned = -0.000172738 Jy
! Component: 150  -  total flux cleaned = -0.000195237 Jy
! Component: 200  -  total flux cleaned = -0.000235669 Jy
! Total flux subtracted in 200 components = -0.000235669 Jy
! Clean residual min=-0.003362 max=0.003759 Jy/beam
! Clean residual mean=-0.000002 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.20159 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 110 components and 0.20159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077783Jy  sigma=0.453986
! Fit after  self-cal, rms=0.077782Jy  sigma=0.453980
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077782Jy  sigma=0.453980
! Fit after  self-cal, rms=0.078220Jy  sigma=0.453955
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.103 mas, bmaj=12.24 mas, bpa=-0.01262 degrees
! Estimated noise=2.3765 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00060874 Jy
! Component: 100  -  total flux cleaned = -0.000770201 Jy
! Component: 150  -  total flux cleaned = -0.000898928 Jy
! Component: 200  -  total flux cleaned = -0.000960179 Jy
! Total flux subtracted in 200 components = -0.000960179 Jy
! Clean residual min=-0.003726 max=0.004200 Jy/beam
! Clean residual mean=-0.000005 rms=0.001217 Jy/beam
! Combined flux in latest and established models = 0.200629 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 114 components and 0.200629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078212Jy  sigma=0.453992
! Fit after  self-cal, rms=0.078206Jy  sigma=0.453949
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.46825e-05 Jy
! Component: 100  -  total flux cleaned = -3.18886e-05 Jy
! Component: 150  -  total flux cleaned = -6.42111e-05 Jy
! Component: 200  -  total flux cleaned = -9.17488e-05 Jy
! Total flux subtracted in 200 components = -9.17488e-05 Jy
! Clean residual min=-0.003675 max=0.004243 Jy/beam
! Clean residual mean=-0.000005 rms=0.001215 Jy/beam
! Combined flux in latest and established models = 0.200538 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 117 components and 0.200538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078210Jy  sigma=0.454000
! Fit after  self-cal, rms=0.078207Jy  sigma=0.453974
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=8.113 mas, bpa=-1.406 degrees
! Estimated noise=1.9758 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.332 x 8.113 at -1.406 degrees (North through East)
! Clean map  min=-0.0032384  max=0.16268 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.868 mas, bmaj=7.329 mas, bpa=-0.7032 degrees
! Estimated noise=2.36887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.125995 Jy
! Component: 100  -  total flux cleaned = 0.157876 Jy
! Component: 150  -  total flux cleaned = 0.171981 Jy
! Component: 200  -  total flux cleaned = 0.180586 Jy
! Total flux subtracted in 200 components = 0.180586 Jy
! Clean residual min=-0.004207 max=0.005193 Jy/beam
! Clean residual mean=-0.000017 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.180586 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.180586 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=8.113 mas, bpa=-1.406 degrees
! Estimated noise=1.9758 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00773271 Jy
! Component: 100  -  total flux cleaned = 0.0124712 Jy
! Component: 150  -  total flux cleaned = 0.0156246 Jy
! Component: 200  -  total flux cleaned = 0.0177479 Jy
! Total flux subtracted in 200 components = 0.0177479 Jy
! Clean residual min=-0.003474 max=0.003879 Jy/beam
! Clean residual mean=-0.000004 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.198333 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 53 components and 0.198333 Jy
! Inverting map 
! Added new window around map position (57, 126).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351284 Jy
! Component: 100  -  total flux cleaned = 0.00527273 Jy
! Component: 150  -  total flux cleaned = 0.00665874 Jy
! Component: 200  -  total flux cleaned = 0.00736037 Jy
! Total flux subtracted in 200 components = 0.00736037 Jy
! Clean residual min=-0.003242 max=0.003253 Jy/beam
! Clean residual mean=-0.000001 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 0.205694 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 74 components and 0.205694 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.103 mas, bmaj=12.24 mas, bpa=-0.01262 degrees
! Estimated noise=2.3765 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00084523 Jy
! Component: 100  -  total flux cleaned = 0.00102356 Jy
! Component: 150  -  total flux cleaned = 0.00121365 Jy
! Component: 200  -  total flux cleaned = 0.00135074 Jy
! Total flux subtracted in 200 components = 0.00135074 Jy
! Clean residual min=-0.003230 max=0.003576 Jy/beam
! Clean residual mean=-0.000004 rms=0.001062 Jy/beam
! Combined flux in latest and established models = 0.207045 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125656 Jy
! Component: 100  -  total flux cleaned = 0.000210948 Jy
! Component: 150  -  total flux cleaned = 0.000262839 Jy
! Component: 200  -  total flux cleaned = 0.000311668 Jy
! Total flux subtracted in 200 components = 0.000311668 Jy
! Clean residual min=-0.003149 max=0.003557 Jy/beam
! Clean residual mean=-0.000004 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.207356 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 100 components and 0.207356 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=8.113 mas, bpa=-1.406 degrees
! Estimated noise=1.9758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.7747e-05 Jy
! Component: 100  -  total flux cleaned = -0.000163607 Jy
! Component: 150  -  total flux cleaned = -5.113e-05 Jy
! Component: 200  -  total flux cleaned = -1.71864e-05 Jy
! Total flux subtracted in 200 components = -1.71864e-05 Jy
! Clean residual min=-0.003157 max=0.003082 Jy/beam
! Clean residual mean=-0.000002 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.207339 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 115 components and 0.207339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078104Jy  sigma=0.452513
! Fit after  self-cal, rms=0.078061Jy  sigma=0.452281
wmodel J1044+0655_S_b_map.mod
! Writing 115 model components to file: J1044+0655_S_b_map.mod
wobs   J1044+0655_S_b_uvs.fits
! Writing UV FITS file: J1044+0655_S_b_uvs.fits
wwins  J1044+0655_S_b_map.win
! wwins: Wrote 3 windows to J1044+0655_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000345281 Jy
! Component: 100  -  total flux cleaned = 0.000559214 Jy
! Component: 150  -  total flux cleaned = 0.000763089 Jy
! Component: 200  -  total flux cleaned = 0.00081127 Jy
! Component: 250  -  total flux cleaned = 0.000763014 Jy
! Component: 300  -  total flux cleaned = 0.000809798 Jy
! Component: 350  -  total flux cleaned = 0.000676379 Jy
! Component: 400  -  total flux cleaned = 0.000501729 Jy
! Component: 450  -  total flux cleaned = 0.000330786 Jy
! Component: 500  -  total flux cleaned = 0.000330395 Jy
! Component: 550  -  total flux cleaned = 0.000207616 Jy
! Component: 600  -  total flux cleaned = 0.00024866 Jy
! Component: 650  -  total flux cleaned = 0.00020956 Jy
! Component: 700  -  total flux cleaned = 0.000170872 Jy
! Component: 750  -  total flux cleaned = 0.000247456 Jy
! Component: 800  -  total flux cleaned = 0.000171895 Jy
! Component: 850  -  total flux cleaned = 0.000135336 Jy
! Component: 900  -  total flux cleaned = -1.04795e-05 Jy
! Component: 950  -  total flux cleaned = -1.0523e-05 Jy
! Component: 1000  -  total flux cleaned = -1.0021e-05 Jy
! Component: 1050  -  total flux cleaned = -9.6605e-06 Jy
! Component: 1100  -  total flux cleaned = -8.73711e-06 Jy
! Component: 1150  -  total flux cleaned = 2.60798e-05 Jy
! Component: 1200  -  total flux cleaned = 2.5761e-05 Jy
! Component: 1250  -  total flux cleaned = -0.000207628 Jy
! Component: 1300  -  total flux cleaned = -0.000108031 Jy
! Component: 1350  -  total flux cleaned = -0.00010857 Jy
! Component: 1400  -  total flux cleaned = -0.000173355 Jy
! Component: 1450  -  total flux cleaned = -0.000109894 Jy
! Component: 1500  -  total flux cleaned = -0.000173005 Jy
! Component: 1550  -  total flux cleaned = -0.000172089 Jy
! Component: 1600  -  total flux cleaned = -0.000109844 Jy
! Component: 1650  -  total flux cleaned = -7.92827e-05 Jy
! Component: 1700  -  total flux cleaned = -7.96705e-05 Jy
! Component: 1750  -  total flux cleaned = -4.96964e-05 Jy
! Component: 1800  -  total flux cleaned = -5.00691e-05 Jy
! Component: 1850  -  total flux cleaned = 8.80866e-06 Jy
! Component: 1900  -  total flux cleaned = 3.83052e-05 Jy
! Component: 1950  -  total flux cleaned = 0.000125462 Jy
! Component: 2000  -  total flux cleaned = 0.000211655 Jy
! Component: 2050  -  total flux cleaned = 0.000268088 Jy
! Component: 2100  -  total flux cleaned = 0.000212104 Jy
! Component: 2150  -  total flux cleaned = 0.000267612 Jy
! Component: 2200  -  total flux cleaned = 0.000322748 Jy
! Component: 2250  -  total flux cleaned = 0.000240328 Jy
! Component: 2300  -  total flux cleaned = 0.000267329 Jy
! Component: 2350  -  total flux cleaned = 0.000266769 Jy
! Component: 2400  -  total flux cleaned = 0.00026693 Jy
! Component: 2450  -  total flux cleaned = 0.000266707 Jy
! Component: 2500  -  total flux cleaned = 0.000240345 Jy
! Component: 2550  -  total flux cleaned = 8.37651e-05 Jy
! Component: 2600  -  total flux cleaned = 0.000187435 Jy
! Component: 2650  -  total flux cleaned = 0.000135934 Jy
! Component: 2700  -  total flux cleaned = 0.000161627 Jy
! Component: 2750  -  total flux cleaned = 3.4778e-05 Jy
! Component: 2800  -  total flux cleaned = -1.55691e-05 Jy
! Component: 2850  -  total flux cleaned = 9.1769e-06 Jy
! Component: 2900  -  total flux cleaned = 3.40842e-05 Jy
! Component: 2950  -  total flux cleaned = 3.42249e-05 Jy
! Component: 3000  -  total flux cleaned = 5.86146e-05 Jy
! Component: 3050  -  total flux cleaned = 0.000131391 Jy
! Component: 3100  -  total flux cleaned = 0.000203264 Jy
! Component: 3150  -  total flux cleaned = 0.000226951 Jy
! Component: 3200  -  total flux cleaned = 0.000179599 Jy
! Component: 3250  -  total flux cleaned = 0.000226792 Jy
! Component: 3300  -  total flux cleaned = 0.000343543 Jy
! Component: 3350  -  total flux cleaned = 0.000320282 Jy
! Component: 3400  -  total flux cleaned = 0.000412047 Jy
! Component: 3450  -  total flux cleaned = 0.000457902 Jy
! Component: 3500  -  total flux cleaned = 0.000502954 Jy
! Component: 3550  -  total flux cleaned = 0.000548325 Jy
! Component: 3600  -  total flux cleaned = 0.000615731 Jy
! Component: 3650  -  total flux cleaned = 0.000615599 Jy
! Component: 3700  -  total flux cleaned = 0.000682057 Jy
! Component: 3750  -  total flux cleaned = 0.000769998 Jy
! Component: 3800  -  total flux cleaned = 0.000857459 Jy
! Component: 3850  -  total flux cleaned = 0.000879468 Jy
! Component: 3900  -  total flux cleaned = 0.00100926 Jy
! Component: 3950  -  total flux cleaned = 0.00109537 Jy
! Component: 4000  -  total flux cleaned = 0.00113831 Jy
! Component: 4050  -  total flux cleaned = 0.00128703 Jy
! Total flux subtracted in 4096 components = 0.00128723 Jy
! Clean residual min=-0.001480 max=0.001345 Jy/beam
! Clean residual mean=0.000002 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.208626 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 397 components and 0.208626 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1044+0655_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.332 x 8.113 at -1.406 degrees (North through East)
! Clean map  min=-0.0025486  max=0.16329 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1044+0655_S_b_map.fits
wmodel /image_prod/ug002_uva//J1044+0655_S_b_map.mod
! Writing 397 model components to file: /image_prod/ug002_uva//J1044+0655_S_b_map.mod
wobs   /image_prod/ug002_uva//J1044+0655_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1044+0655_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J1044+0655_S_b_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1044+0655_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.163288 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000378004 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.694488 0.694488 1.38898 2.77795 5.5559 11.1118 22.2236 44.4472 88.8944
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.163 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  431.973 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1044+0655_S_b_dfm.log closed on Wed Mar  4 23:41:54 2020