! Started logfile: /image_prod/ug002_uva//J1037+0424_S_dfm.log on Wed Mar  4 23:39:31 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1037+0424_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1037+0424_S_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.971481 visibilities/baseline/integration-bin.
! Found source: J1037+0424
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7869 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1037+0424_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012670Jy  sigma=8.467225
! Fit after  self-cal, rms=0.835404Jy  sigma=6.940358
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.925 mas, bmaj=7.224 mas, bpa=-3.586 degrees
! Estimated noise=1.40367 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128928 Jy
! Component: 100  -  total flux cleaned = 0.161433 Jy
! Total flux subtracted in 100 components = 0.161433 Jy
! Clean residual min=-0.007531 max=0.019284 Jy/beam
! Clean residual mean=-0.000005 rms=0.002207 Jy/beam
! Combined flux in latest and established models = 0.161433 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.161433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079134Jy  sigma=0.598222
! Fit after  self-cal, rms=0.079105Jy  sigma=0.597728
! Inverting map 
! Added new window around map position (3, -9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184716 Jy
! Component: 100  -  total flux cleaned = 0.0297866 Jy
! Total flux subtracted in 100 components = 0.0297866 Jy
! Clean residual min=-0.005710 max=0.011600 Jy/beam
! Clean residual mean=-0.000002 rms=0.001628 Jy/beam
! Combined flux in latest and established models = 0.19122 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.19122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074646Jy  sigma=0.543425
! Fit after  self-cal, rms=0.074549Jy  sigma=0.541680
! Inverting map 
! Added new window around map position (4, 11).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105572 Jy
! Component: 100  -  total flux cleaned = 0.0171811 Jy
! Total flux subtracted in 100 components = 0.0171811 Jy
! Clean residual min=-0.005627 max=0.007809 Jy/beam
! Clean residual mean=0.000001 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 0.208401 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 35 components and 0.208401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073065Jy  sigma=0.521751
! Fit after  self-cal, rms=0.073018Jy  sigma=0.520957
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=8.047 mas, bpa=-3.882 degrees
! Estimated noise=0.989447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.5, 10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00700418 Jy
! Component: 100  -  total flux cleaned = 0.0104565 Jy
! Component: 150  -  total flux cleaned = 0.0116233 Jy
! Component: 200  -  total flux cleaned = 0.0120929 Jy
! Total flux subtracted in 200 components = 0.0120929 Jy
! Clean residual min=-0.004073 max=0.005494 Jy/beam
! Clean residual mean=0.000001 rms=0.001157 Jy/beam
! Combined flux in latest and established models = 0.220494 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 57 components and 0.220494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071797Jy  sigma=0.504999
! Fit after  self-cal, rms=0.071732Jy  sigma=0.504518
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.518 x 8.047 at -3.882 degrees (North through East)
! Clean map  min=-0.0054584  max=0.15867 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        1.06     KP        0.99     
!   LA        1.01     MK        1.05     NL        0.96     OV        0.94     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.66     FD        0.95     HN        1.01     KP        0.96     
!   LA        1.02     MK        0.99     NL        1.07     OV        0.93     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.96     HN        1.03     KP        0.94     
!   LA        1.02     MK        1.04     NL        0.95     OV        0.95     
!   PT        1.01     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.071732Jy  sigma=0.504518
! Fit after  self-cal, rms=0.073302Jy  sigma=0.480355
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.527 mas, bmaj=8.201 mas, bpa=-3.838 degrees
! Estimated noise=1.00756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0014494 Jy
! Component: 100  -  total flux cleaned = -0.00144324 Jy
! Component: 150  -  total flux cleaned = -0.00165414 Jy
! Component: 200  -  total flux cleaned = -0.00171618 Jy
! Total flux subtracted in 200 components = -0.00171618 Jy
! Clean residual min=-0.003165 max=0.003312 Jy/beam
! Clean residual mean=-0.000005 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.218778 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 80 components and 0.218778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073043Jy  sigma=0.478677
! Fit after  self-cal, rms=0.073069Jy  sigma=0.478333
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073069Jy  sigma=0.478333
! Fit after  self-cal, rms=0.078681Jy  sigma=0.468922
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.527 mas, bmaj=8.224 mas, bpa=-3.919 degrees
! Estimated noise=1.00973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000996742 Jy
! Component: 100  -  total flux cleaned = -0.00113323 Jy
! Component: 150  -  total flux cleaned = -0.00119281 Jy
! Component: 200  -  total flux cleaned = -0.00119301 Jy
! Total flux subtracted in 200 components = -0.00119301 Jy
! Clean residual min=-0.002463 max=0.002739 Jy/beam
! Clean residual mean=-0.000000 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.217585 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.217585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078566Jy  sigma=0.467873
! Fit after  self-cal, rms=0.078624Jy  sigma=0.467756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-47, -14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123858 Jy
! Component: 100  -  total flux cleaned = 0.00116234 Jy
! Component: 150  -  total flux cleaned = 0.00116111 Jy
! Component: 200  -  total flux cleaned = 0.00125326 Jy
! Total flux subtracted in 200 components = 0.00125326 Jy
! Clean residual min=-0.002271 max=0.002041 Jy/beam
! Clean residual mean=-0.000001 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.218838 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.218838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078492Jy  sigma=0.466631
! Fit after  self-cal, rms=0.078493Jy  sigma=0.466574
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078493Jy  sigma=0.466574
! Fit after  self-cal, rms=0.079176Jy  sigma=0.466138
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.521 mas, bmaj=8.225 mas, bpa=-3.959 degrees
! Estimated noise=1.00681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000814 Jy
! Component: 100  -  total flux cleaned = -0.000912143 Jy
! Component: 150  -  total flux cleaned = -0.000787046 Jy
! Component: 200  -  total flux cleaned = -0.000672187 Jy
! Total flux subtracted in 200 components = -0.000672187 Jy
! Clean residual min=-0.002184 max=0.001924 Jy/beam
! Clean residual mean=0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.218166 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 130 components and 0.218166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079113Jy  sigma=0.465642
! Fit after  self-cal, rms=0.079110Jy  sigma=0.465615
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.53443e-05 Jy
! Component: 100  -  total flux cleaned = 5.29933e-05 Jy
! Component: 150  -  total flux cleaned = 0.000149601 Jy
! Component: 200  -  total flux cleaned = 0.000209617 Jy
! Total flux subtracted in 200 components = 0.000209617 Jy
! Clean residual min=-0.002108 max=0.001901 Jy/beam
! Clean residual mean=0.000001 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.218375 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 139 components and 0.218375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079076Jy  sigma=0.465364
! Fit after  self-cal, rms=0.079073Jy  sigma=0.465350
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079073Jy  sigma=0.465350
! Fit after  self-cal, rms=0.079524Jy  sigma=0.465251
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.85 mas, bmaj=12.47 mas, bpa=-5.495 degrees
! Estimated noise=1.17422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00133201 Jy
! Component: 100  -  total flux cleaned = -0.00161656 Jy
! Component: 150  -  total flux cleaned = -0.00170759 Jy
! Component: 200  -  total flux cleaned = -0.00173471 Jy
! Total flux subtracted in 200 components = -0.00173471 Jy
! Clean residual min=-0.002228 max=0.001986 Jy/beam
! Clean residual mean=0.000002 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.216641 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 156 components and 0.216641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079515Jy  sigma=0.465034
! Fit after  self-cal, rms=0.079513Jy  sigma=0.465015
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.71042e-05 Jy
! Component: 100  -  total flux cleaned = -0.000119299 Jy
! Component: 150  -  total flux cleaned = -9.82613e-05 Jy
! Component: 200  -  total flux cleaned = -9.89399e-05 Jy
! Total flux subtracted in 200 components = -9.89399e-05 Jy
! Clean residual min=-0.002228 max=0.002009 Jy/beam
! Clean residual mean=0.000002 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.216542 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 169 components and 0.216542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079508Jy  sigma=0.464948
! Fit after  self-cal, rms=0.079505Jy  sigma=0.464942
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.515 mas, bmaj=8.226 mas, bpa=-3.976 degrees
! Estimated noise=1.00496 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.515 x 8.226 at -3.976 degrees (North through East)
! Clean map  min=-0.0020465  max=0.16199 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.924 mas, bmaj=7.378 mas, bpa=-3.668 degrees
! Estimated noise=1.42692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130899 Jy
! Component: 100  -  total flux cleaned = 0.163435 Jy
! Component: 150  -  total flux cleaned = 0.178446 Jy
! Component: 200  -  total flux cleaned = 0.188061 Jy
! Total flux subtracted in 200 components = 0.188061 Jy
! Clean residual min=-0.004299 max=0.005429 Jy/beam
! Clean residual mean=-0.000003 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.188061 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.188061 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.515 mas, bmaj=8.226 mas, bpa=-3.976 degrees
! Estimated noise=1.00496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00884268 Jy
! Component: 100  -  total flux cleaned = 0.0147046 Jy
! Component: 150  -  total flux cleaned = 0.0185717 Jy
! Component: 200  -  total flux cleaned = 0.0209111 Jy
! Total flux subtracted in 200 components = 0.0209111 Jy
! Clean residual min=-0.002548 max=0.002668 Jy/beam
! Clean residual mean=0.000002 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.208972 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 70 components and 0.208972 Jy
! Inverting map 
! Added new window around map position (-3, -9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234456 Jy
! Component: 100  -  total flux cleaned = 0.00366402 Jy
! Component: 150  -  total flux cleaned = 0.0045701 Jy
! Component: 200  -  total flux cleaned = 0.00522471 Jy
! Total flux subtracted in 200 components = 0.00522471 Jy
! Clean residual min=-0.002367 max=0.002133 Jy/beam
! Clean residual mean=0.000002 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.214197 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 91 components and 0.214197 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.85 mas, bmaj=12.47 mas, bpa=-5.495 degrees
! Estimated noise=1.17422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116955 Jy
! Component: 100  -  total flux cleaned = 0.00204579 Jy
! Component: 150  -  total flux cleaned = 0.00263012 Jy
! Component: 200  -  total flux cleaned = 0.00271168 Jy
! Total flux subtracted in 200 components = 0.00271168 Jy
! Clean residual min=-0.002166 max=0.002111 Jy/beam
! Clean residual mean=0.000004 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.216909 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.81485e-06 Jy
! Component: 100  -  total flux cleaned = 6.00846e-05 Jy
! Component: 150  -  total flux cleaned = 8.5174e-05 Jy
! Component: 200  -  total flux cleaned = 5.98842e-05 Jy
! Total flux subtracted in 200 components = 5.98842e-05 Jy
! Clean residual min=-0.002132 max=0.002052 Jy/beam
! Clean residual mean=0.000003 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.216969 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 149 components and 0.216969 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.515 mas, bmaj=8.226 mas, bpa=-3.976 degrees
! Estimated noise=1.00496 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.51384e-05 Jy
! Component: 100  -  total flux cleaned = -9.69897e-05 Jy
! Component: 150  -  total flux cleaned = -1.61632e-05 Jy
! Component: 200  -  total flux cleaned = 5.95719e-05 Jy
! Total flux subtracted in 200 components = 5.95719e-05 Jy
! Clean residual min=-0.002203 max=0.001952 Jy/beam
! Clean residual mean=0.000002 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.217028 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 170 components and 0.217028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079542Jy  sigma=0.464984
! Fit after  self-cal, rms=0.079490Jy  sigma=0.464870
wmodel J1037+0424_S_map.mod
! Writing 170 model components to file: J1037+0424_S_map.mod
wobs   J1037+0424_S_uvs.fits
! Writing UV FITS file: J1037+0424_S_uvs.fits
wwins  J1037+0424_S_map.win
! wwins: Wrote 6 windows to J1037+0424_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000621452 Jy
! Component: 100  -  total flux cleaned = -0.00104088 Jy
! Component: 150  -  total flux cleaned = -0.00127254 Jy
! Component: 200  -  total flux cleaned = -0.0015241 Jy
! Component: 250  -  total flux cleaned = -0.00161436 Jy
! Component: 300  -  total flux cleaned = -0.00173069 Jy
! Component: 350  -  total flux cleaned = -0.0017882 Jy
! Component: 400  -  total flux cleaned = -0.00187243 Jy
! Component: 450  -  total flux cleaned = -0.00184625 Jy
! Component: 500  -  total flux cleaned = -0.00184691 Jy
! Component: 550  -  total flux cleaned = -0.00179499 Jy
! Component: 600  -  total flux cleaned = -0.00179466 Jy
! Component: 650  -  total flux cleaned = -0.00174455 Jy
! Component: 700  -  total flux cleaned = -0.00167129 Jy
! Component: 750  -  total flux cleaned = -0.0016712 Jy
! Component: 800  -  total flux cleaned = -0.00167093 Jy
! Component: 850  -  total flux cleaned = -0.00162432 Jy
! Component: 900  -  total flux cleaned = -0.00160142 Jy
! Component: 950  -  total flux cleaned = -0.00157879 Jy
! Component: 1000  -  total flux cleaned = -0.00149058 Jy
! Component: 1050  -  total flux cleaned = -0.00157798 Jy
! Component: 1100  -  total flux cleaned = -0.00147002 Jy
! Component: 1150  -  total flux cleaned = -0.00142749 Jy
! Component: 1200  -  total flux cleaned = -0.00134319 Jy
! Component: 1250  -  total flux cleaned = -0.00128079 Jy
! Component: 1300  -  total flux cleaned = -0.00121945 Jy
! Component: 1350  -  total flux cleaned = -0.00121969 Jy
! Component: 1400  -  total flux cleaned = -0.00115915 Jy
! Component: 1450  -  total flux cleaned = -0.00107965 Jy
! Component: 1500  -  total flux cleaned = -0.00106009 Jy
! Component: 1550  -  total flux cleaned = -0.000942848 Jy
! Component: 1600  -  total flux cleaned = -0.000923649 Jy
! Component: 1650  -  total flux cleaned = -0.000866245 Jy
! Component: 1700  -  total flux cleaned = -0.00079031 Jy
! Component: 1750  -  total flux cleaned = -0.000639841 Jy
! Component: 1800  -  total flux cleaned = -0.000639934 Jy
! Component: 1850  -  total flux cleaned = -0.000621311 Jy
! Component: 1900  -  total flux cleaned = -0.000456526 Jy
! Component: 1950  -  total flux cleaned = -0.000420073 Jy
! Component: 2000  -  total flux cleaned = -0.000402147 Jy
! Component: 2050  -  total flux cleaned = -0.000348361 Jy
! Component: 2100  -  total flux cleaned = -0.000259802 Jy
! Component: 2150  -  total flux cleaned = -0.000189632 Jy
! Component: 2200  -  total flux cleaned = -0.000119953 Jy
! Component: 2250  -  total flux cleaned = -6.83216e-05 Jy
! Component: 2300  -  total flux cleaned = 1.70357e-07 Jy
! Component: 2350  -  total flux cleaned = 5.08183e-05 Jy
! Component: 2400  -  total flux cleaned = 8.43052e-05 Jy
! Component: 2450  -  total flux cleaned = 0.000101104 Jy
! Component: 2500  -  total flux cleaned = 0.000184093 Jy
! Component: 2550  -  total flux cleaned = 0.000151392 Jy
! Component: 2600  -  total flux cleaned = 0.000265793 Jy
! Component: 2650  -  total flux cleaned = 0.000346831 Jy
! Component: 2700  -  total flux cleaned = 0.000379011 Jy
! Component: 2750  -  total flux cleaned = 0.000378822 Jy
! Component: 2800  -  total flux cleaned = 0.000410392 Jy
! Component: 2850  -  total flux cleaned = 0.000457644 Jy
! Component: 2900  -  total flux cleaned = 0.000473141 Jy
! Component: 2950  -  total flux cleaned = 0.000535222 Jy
! Component: 3000  -  total flux cleaned = 0.000550597 Jy
! Component: 3050  -  total flux cleaned = 0.000520144 Jy
! Component: 3100  -  total flux cleaned = 0.000550602 Jy
! Component: 3150  -  total flux cleaned = 0.000596008 Jy
! Component: 3200  -  total flux cleaned = 0.000535993 Jy
! Component: 3250  -  total flux cleaned = 0.000610937 Jy
! Component: 3300  -  total flux cleaned = 0.000610957 Jy
! Component: 3350  -  total flux cleaned = 0.00053722 Jy
! Component: 3400  -  total flux cleaned = 0.00059589 Jy
! Component: 3450  -  total flux cleaned = 0.00056681 Jy
! Component: 3500  -  total flux cleaned = 0.000595839 Jy
! Component: 3550  -  total flux cleaned = 0.000653362 Jy
! Component: 3600  -  total flux cleaned = 0.000653091 Jy
! Component: 3650  -  total flux cleaned = 0.000624686 Jy
! Component: 3700  -  total flux cleaned = 0.000638912 Jy
! Component: 3750  -  total flux cleaned = 0.000652964 Jy
! Component: 3800  -  total flux cleaned = 0.000625052 Jy
! Component: 3850  -  total flux cleaned = 0.000625089 Jy
! Component: 3900  -  total flux cleaned = 0.000652801 Jy
! Component: 3950  -  total flux cleaned = 0.00063901 Jy
! Component: 4000  -  total flux cleaned = 0.000652633 Jy
! Component: 4050  -  total flux cleaned = 0.000652497 Jy
! Total flux subtracted in 4096 components = 0.000638987 Jy
! Clean residual min=-0.000880 max=0.001056 Jy/beam
! Clean residual mean=0.000003 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.217667 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 443 components and 0.217667 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1037+0424_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.515 x 8.226 at -3.976 degrees (North through East)
! Clean map  min=-0.0021926  max=0.16408 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1037+0424_S_map.fits
wmodel /image_prod/ug002_uva//J1037+0424_S_map.mod
! Writing 443 model components to file: /image_prod/ug002_uva//J1037+0424_S_map.mod
wobs   /image_prod/ug002_uva//J1037+0424_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1037+0424_S_uvs.fits
wwins  /image_prod/ug002_uva//J1037+0424_S_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1037+0424_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.16408 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000251068 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.459046 0.459046 0.918091 1.83618 3.67237 7.34473 14.6895 29.3789 58.7578
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.164 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  653.529 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1037+0424_S_dfm.log closed on Wed Mar  4 23:39:35 2020