! Started logfile: /image_prod/ug002_uva//J1036-0605_S_dfm.log on Wed Mar 4 23:39:20 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1036-0605_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1036-0605_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.701389 visibilities/baseline/integration-bin. ! Found source: J1036-0605 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4545 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1036-0605_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017165Jy sigma=7.286291 ! Fit after self-cal, rms=0.743999Jy sigma=5.312947 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=6.767 mas, bpa=-3.775 degrees ! Estimated noise=1.8137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20287 Jy ! Component: 100 - total flux cleaned = 0.257863 Jy ! Total flux subtracted in 100 components = 0.257863 Jy ! Clean residual min=-0.024998 max=0.095738 Jy/beam ! Clean residual mean=-0.000098 rms=0.008064 Jy/beam ! Combined flux in latest and established models = 0.257863 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.257863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.144601Jy sigma=0.940358 ! Fit after self-cal, rms=0.144598Jy sigma=0.939975 ! Inverting map ! Added new window around map position (5.5, 5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0753238 Jy ! Component: 100 - total flux cleaned = 0.103634 Jy ! Total flux subtracted in 100 components = 0.103634 Jy ! Clean residual min=-0.014211 max=0.018353 Jy/beam ! Clean residual mean=-0.000055 rms=0.003724 Jy/beam ! Combined flux in latest and established models = 0.361497 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 15 components and 0.361497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100247Jy sigma=0.601175 ! Fit after self-cal, rms=0.094300Jy sigma=0.560067 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215143 Jy ! Component: 100 - total flux cleaned = 0.0312382 Jy ! Total flux subtracted in 100 components = 0.0312382 Jy ! Clean residual min=-0.009391 max=0.009296 Jy/beam ! Clean residual mean=-0.000029 rms=0.002289 Jy/beam ! Combined flux in latest and established models = 0.392735 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.392736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088444Jy sigma=0.519558 ! Fit after self-cal, rms=0.088147Jy sigma=0.517892 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=7.453 mas, bpa=-2.849 degrees ! Estimated noise=1.52564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301524 Jy ! Component: 100 - total flux cleaned = 0.0042964 Jy ! Component: 150 - total flux cleaned = 0.00558783 Jy ! Component: 200 - total flux cleaned = 0.00643344 Jy ! Total flux subtracted in 200 components = 0.00643344 Jy ! Clean residual min=-0.008818 max=0.007564 Jy/beam ! Clean residual mean=-0.000025 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 0.399169 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.399169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085819Jy sigma=0.502886 ! Fit after self-cal, rms=0.085676Jy sigma=0.502199 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.023 x 7.453 at -2.849 degrees (North through East) ! Clean map min=-0.0082969 max=0.26521 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.06 HN 1.00 KP 1.02 ! LA 1.03 MK 1.00 NL 1.01 OV 0.85 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.03 HN 1.02 KP 1.06 ! LA 1.05 MK 1.01 NL 1.02 OV 0.91 ! SC 0.86 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.01 HN 1.00 KP 1.04 ! LA 1.01 MK 0.98 NL 0.93 OV 0.94 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.085676Jy sigma=0.502199 ! Fit after self-cal, rms=0.075248Jy sigma=0.469615 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.359 mas, bpa=-1.937 degrees ! Estimated noise=1.49544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325871 Jy ! Component: 100 - total flux cleaned = 0.00271773 Jy ! Component: 150 - total flux cleaned = 0.00226359 Jy ! Component: 200 - total flux cleaned = 0.0019822 Jy ! Total flux subtracted in 200 components = 0.0019822 Jy ! Clean residual min=-0.004614 max=0.004608 Jy/beam ! Clean residual mean=-0.000012 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.401151 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.401151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074973Jy sigma=0.467828 ! Fit after self-cal, rms=0.074951Jy sigma=0.467592 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074951Jy sigma=0.467592 ! Fit after self-cal, rms=0.068994Jy sigma=0.453934 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=7.351 mas, bpa=-1.851 degrees ! Estimated noise=1.49847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424083 Jy ! Component: 100 - total flux cleaned = 0.000476024 Jy ! Component: 150 - total flux cleaned = 0.000474897 Jy ! Component: 200 - total flux cleaned = 0.000475544 Jy ! Total flux subtracted in 200 components = 0.000475544 Jy ! Clean residual min=-0.002476 max=0.003366 Jy/beam ! Clean residual mean=-0.000002 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.401627 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 73 components and 0.401627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068923Jy sigma=0.453356 ! Fit after self-cal, rms=0.068922Jy sigma=0.453314 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-53, -116). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174762 Jy ! Component: 100 - total flux cleaned = 0.00134762 Jy ! Component: 150 - total flux cleaned = 0.00139013 Jy ! Component: 200 - total flux cleaned = 0.00143068 Jy ! Total flux subtracted in 200 components = 0.00143068 Jy ! Clean residual min=-0.002541 max=0.002536 Jy/beam ! Clean residual mean=-0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.403057 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.403057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068779Jy sigma=0.452441 ! Fit after self-cal, rms=0.068780Jy sigma=0.452391 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068780Jy sigma=0.452391 ! Fit after self-cal, rms=0.068672Jy sigma=0.451730 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=7.352 mas, bpa=-1.817 degrees ! Estimated noise=1.49966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.30874e-05 Jy ! Component: 100 - total flux cleaned = -8.85881e-05 Jy ! Component: 150 - total flux cleaned = -0.000120713 Jy ! Component: 200 - total flux cleaned = -0.000183692 Jy ! Total flux subtracted in 200 components = -0.000183692 Jy ! Clean residual min=-0.002230 max=0.002316 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.402874 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 100 components and 0.402874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068635Jy sigma=0.451473 ! Fit after self-cal, rms=0.068645Jy sigma=0.451464 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.05818e-05 Jy ! Component: 100 - total flux cleaned = -1.78331e-05 Jy ! Component: 150 - total flux cleaned = -4.57384e-05 Jy ! Component: 200 - total flux cleaned = -4.62126e-05 Jy ! Total flux subtracted in 200 components = -4.62126e-05 Jy ! Clean residual min=-0.002171 max=0.002291 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.402827 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.402827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068621Jy sigma=0.451335 ! Fit after self-cal, rms=0.068621Jy sigma=0.451333 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068621Jy sigma=0.451333 ! Fit after self-cal, rms=0.068671Jy sigma=0.451319 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.578 mas, bmaj=12.18 mas, bpa=-3.315 degrees ! Estimated noise=1.98036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000415083 Jy ! Component: 100 - total flux cleaned = -0.000391252 Jy ! Component: 150 - total flux cleaned = -0.000371289 Jy ! Component: 200 - total flux cleaned = -0.000339234 Jy ! Total flux subtracted in 200 components = -0.000339234 Jy ! Clean residual min=-0.002695 max=0.002406 Jy/beam ! Clean residual mean=-0.000002 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.402488 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 118 components and 0.402488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068676Jy sigma=0.451312 ! Fit after self-cal, rms=0.068677Jy sigma=0.451305 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122714 Jy ! Component: 100 - total flux cleaned = 0.000123575 Jy ! Component: 150 - total flux cleaned = 0.000110716 Jy ! Component: 200 - total flux cleaned = 9.90903e-05 Jy ! Total flux subtracted in 200 components = 9.90903e-05 Jy ! Clean residual min=-0.002654 max=0.002420 Jy/beam ! Clean residual mean=-0.000002 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.402587 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 0.402587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068678Jy sigma=0.451317 ! Fit after self-cal, rms=0.068679Jy sigma=0.451314 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=7.353 mas, bpa=-1.8 degrees ! Estimated noise=1.5005 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.986 x 7.353 at -1.8 degrees (North through East) ! Clean map min=-0.0020393 max=0.26212 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=6.7 mas, bpa=-2.775 degrees ! Estimated noise=1.77679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207519 Jy ! Component: 100 - total flux cleaned = 0.294195 Jy ! Component: 150 - total flux cleaned = 0.337133 Jy ! Component: 200 - total flux cleaned = 0.362045 Jy ! Total flux subtracted in 200 components = 0.362045 Jy ! Clean residual min=-0.006753 max=0.013150 Jy/beam ! Clean residual mean=-0.000015 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 0.362045 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.362045 Jy ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=7.353 mas, bpa=-1.8 degrees ! Estimated noise=1.5005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176708 Jy ! Component: 100 - total flux cleaned = 0.0284449 Jy ! Component: 150 - total flux cleaned = 0.0351862 Jy ! Component: 200 - total flux cleaned = 0.0397622 Jy ! Total flux subtracted in 200 components = 0.0397622 Jy ! Clean residual min=-0.003012 max=0.003051 Jy/beam ! Clean residual mean=-0.000002 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.401807 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.401807 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.578 mas, bmaj=12.18 mas, bpa=-3.315 degrees ! Estimated noise=1.98036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236101 Jy ! Component: 100 - total flux cleaned = 0.00268841 Jy ! Component: 150 - total flux cleaned = 0.00262992 Jy ! Component: 200 - total flux cleaned = 0.00257803 Jy ! Total flux subtracted in 200 components = 0.00257803 Jy ! Clean residual min=-0.002774 max=0.002535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.404385 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134829 Jy ! Component: 100 - total flux cleaned = -0.000297756 Jy ! Component: 150 - total flux cleaned = -0.000446788 Jy ! Component: 200 - total flux cleaned = -0.000584822 Jy ! Total flux subtracted in 200 components = -0.000584822 Jy ! Clean residual min=-0.002635 max=0.002454 Jy/beam ! Clean residual mean=-0.000002 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.4038 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.403801 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=7.353 mas, bpa=-1.8 degrees ! Estimated noise=1.5005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988449 Jy ! Component: 100 - total flux cleaned = 0.00100624 Jy ! Component: 150 - total flux cleaned = 0.000879905 Jy ! Component: 200 - total flux cleaned = 0.00087626 Jy ! Total flux subtracted in 200 components = 0.00087626 Jy ! Clean residual min=-0.002258 max=0.002370 Jy/beam ! Clean residual mean=-0.000000 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.404677 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 0.404677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068744Jy sigma=0.452026 ! Fit after self-cal, rms=0.068729Jy sigma=0.451900 wmodel J1036-0605_S_map.mod ! Writing 66 model components to file: J1036-0605_S_map.mod wobs J1036-0605_S_uvs.fits ! Writing UV FITS file: J1036-0605_S_uvs.fits wwins J1036-0605_S_map.win ! wwins: Wrote 3 windows to J1036-0605_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406383 Jy ! Component: 100 - total flux cleaned = 0.000691602 Jy ! Component: 150 - total flux cleaned = 0.000808914 Jy ! Component: 200 - total flux cleaned = 0.000847252 Jy ! Component: 250 - total flux cleaned = 0.000918044 Jy ! Component: 300 - total flux cleaned = 0.000951386 Jy ! Component: 350 - total flux cleaned = 0.000949915 Jy ! Component: 400 - total flux cleaned = 0.000981709 Jy ! Component: 450 - total flux cleaned = 0.00101251 Jy ! Component: 500 - total flux cleaned = 0.000950567 Jy ! Component: 550 - total flux cleaned = 0.000920333 Jy ! Component: 600 - total flux cleaned = 0.000891778 Jy ! Component: 650 - total flux cleaned = 0.00103512 Jy ! Component: 700 - total flux cleaned = 0.00106291 Jy ! Component: 750 - total flux cleaned = 0.0010897 Jy ! Component: 800 - total flux cleaned = 0.00106301 Jy ! Component: 850 - total flux cleaned = 0.00111713 Jy ! Component: 900 - total flux cleaned = 0.0011694 Jy ! Component: 950 - total flux cleaned = 0.00117 Jy ! Component: 1000 - total flux cleaned = 0.00124587 Jy ! Component: 1050 - total flux cleaned = 0.00127056 Jy ! Component: 1100 - total flux cleaned = 0.00144006 Jy ! Component: 1150 - total flux cleaned = 0.00143977 Jy ! Component: 1200 - total flux cleaned = 0.00160358 Jy ! Component: 1250 - total flux cleaned = 0.00167275 Jy ! Component: 1300 - total flux cleaned = 0.00180931 Jy ! Component: 1350 - total flux cleaned = 0.00192044 Jy ! Component: 1400 - total flux cleaned = 0.00200829 Jy ! Component: 1450 - total flux cleaned = 0.00209458 Jy ! Component: 1500 - total flux cleaned = 0.00215858 Jy ! Component: 1550 - total flux cleaned = 0.00232724 Jy ! Component: 1600 - total flux cleaned = 0.00238946 Jy ! Component: 1650 - total flux cleaned = 0.0024712 Jy ! Component: 1700 - total flux cleaned = 0.00249174 Jy ! Component: 1750 - total flux cleaned = 0.00265163 Jy ! Component: 1800 - total flux cleaned = 0.00269099 Jy ! Component: 1850 - total flux cleaned = 0.00276857 Jy ! Component: 1900 - total flux cleaned = 0.00288376 Jy ! Component: 1950 - total flux cleaned = 0.00286468 Jy ! Component: 2000 - total flux cleaned = 0.00301463 Jy ! Component: 2050 - total flux cleaned = 0.0029591 Jy ! Component: 2100 - total flux cleaned = 0.00305054 Jy ! Component: 2150 - total flux cleaned = 0.00312281 Jy ! Component: 2200 - total flux cleaned = 0.00314071 Jy ! Component: 2250 - total flux cleaned = 0.00315839 Jy ! Component: 2300 - total flux cleaned = 0.00319306 Jy ! Component: 2350 - total flux cleaned = 0.00321065 Jy ! Component: 2400 - total flux cleaned = 0.00327926 Jy ! Component: 2450 - total flux cleaned = 0.00329626 Jy ! Component: 2500 - total flux cleaned = 0.00343046 Jy ! Component: 2550 - total flux cleaned = 0.00346329 Jy ! Component: 2600 - total flux cleaned = 0.00354508 Jy ! Component: 2650 - total flux cleaned = 0.00357745 Jy ! Component: 2700 - total flux cleaned = 0.00362577 Jy ! Component: 2750 - total flux cleaned = 0.00367347 Jy ! Component: 2800 - total flux cleaned = 0.00367369 Jy ! Component: 2850 - total flux cleaned = 0.00370521 Jy ! Component: 2900 - total flux cleaned = 0.00379817 Jy ! Component: 2950 - total flux cleaned = 0.00381346 Jy ! Component: 3000 - total flux cleaned = 0.00382864 Jy ! Component: 3050 - total flux cleaned = 0.00390364 Jy ! Component: 3100 - total flux cleaned = 0.0039483 Jy ! Component: 3150 - total flux cleaned = 0.00397776 Jy ! Component: 3200 - total flux cleaned = 0.00397792 Jy ! Component: 3250 - total flux cleaned = 0.00405058 Jy ! Component: 3300 - total flux cleaned = 0.00406502 Jy ! Component: 3350 - total flux cleaned = 0.00406504 Jy ! Component: 3400 - total flux cleaned = 0.0041499 Jy ! Component: 3450 - total flux cleaned = 0.00417794 Jy ! Component: 3500 - total flux cleaned = 0.00417792 Jy ! Component: 3550 - total flux cleaned = 0.0042747 Jy ! Component: 3600 - total flux cleaned = 0.0042609 Jy ! Component: 3650 - total flux cleaned = 0.00434262 Jy ! Component: 3700 - total flux cleaned = 0.00436961 Jy ! Component: 3750 - total flux cleaned = 0.00436971 Jy ! Component: 3800 - total flux cleaned = 0.00444965 Jy ! Component: 3850 - total flux cleaned = 0.00442328 Jy ! Component: 3900 - total flux cleaned = 0.00450202 Jy ! Component: 3950 - total flux cleaned = 0.00448915 Jy ! Component: 4000 - total flux cleaned = 0.00456678 Jy ! Component: 4050 - total flux cleaned = 0.00460541 Jy ! Total flux subtracted in 4096 components = 0.00464367 Jy ! Clean residual min=-0.000768 max=0.000843 Jy/beam ! Clean residual mean=0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.40932 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 351 components and 0.40932 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1036-0605_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.986 x 7.353 at -1.8 degrees (North through East) ! Clean map min=-0.001782 max=0.26119 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1036-0605_S_map.fits wmodel /image_prod/ug002_uva//J1036-0605_S_map.mod ! Writing 351 model components to file: /image_prod/ug002_uva//J1036-0605_S_map.mod wobs /image_prod/ug002_uva//J1036-0605_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1036-0605_S_uvs.fits wwins /image_prod/ug002_uva//J1036-0605_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1036-0605_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.261187 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000231701 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266133 0.266133 0.532265 1.06453 2.12906 4.25812 8.51624 17.0325 34.065 68.1299 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.261 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1127.26 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1036-0605_S_dfm.log closed on Wed Mar 4 23:39:24 2020